2011 Infiniti G37 COUPE Owner’s Manual 2011 Infiniti G37 C OUPE

Printing: October 2010 (12) / OM1E GV36U0 / Printed in U.S.A.

2011 Infiniti G37 COUPE

For your safety, read carefully and keep in this vehicle.

2011 Infiniti G37 COUPE

Owner’s Manual

FOREWORD Your INFINITI represents a new way of thinking about vehicle design. It integrates advanced engineering and superior craftsmanship with a simple, refined aesthetic sensitivity associated with traditional Japanese culture.

Additionally, a separate Customer Care and Lemon Law Information Booklet will explain how to resolve any concerns you may have with your vehicle, as well as clarify your rights under your state’s lemon law.

The result is a different notion of luxury and beauty. The car itself is important, but so is the sense of harmony that the vehicle evokes in its driver, and the sense of satisfaction you feel with the INFINITI — from the way it looks and drives to the high level of retailer service.

READ FIRST — THEN DRIVE SAFELY

To ensure that you enjoy your INFINITI to the fullest, we encourage you to read this Owner’s Manual immediately. It explains all of the features, controls and performance characteristics of your INFINITI; it also provides important instructions and safety information. A separate Warranty Information Booklet is included in your Owner’s literature portfolio. The INFINITI Service and Maintenance Guide explains details about maintaining and servicing your vehicle. Always carry it with you when you take your vehicle to an INFINITI retailer. The Warranty Information Booklet contents provide complete information about all warranties covering this vehicle, the requirements to keep the warranties in effect as well as the INFINITI Roadside Assistance program.

Before driving your vehicle, read your Owner’s Manual carefully. This will ensure familiarity with controls and maintenance requirements, assisting you in the safe operation of your vehicle.

WARNING IMPORTANT SAFETY INFORMATION REMINDERS FOR SAFETY! Follow these important driving rules to help ensure a safe and comfortable trip for you and your passengers! ● NEVER drive under the influence of alcohol or drugs. ● ALWAYS observe posted speed limits and never drive too fast for conditions. ● ALWAYS give your full attention to driving and avoid using vehicle features or taking other actions that could distract you. ● ALWAYS use your seat belts and appropriate child restraint systems. Pre-teen children should be seated in the rear seat. ● ALWAYS provide information about the proper use of vehicle safety features to all occupants of the vehicle. ● ALWAYS review this Owner’s Manual for important safety information.

MODIFICATION OF YOUR VEHICLE This vehicle should not be modified. Modification could affect its performance, safety or durability, and may even violate governmental regulations. In addition, damage or performance problems resulting from modification will not be covered under the INFINITI warranties.

WHEN READING THE MANUAL This manual includes information for all options available on this model. Therefore, you may find some information that does not apply to your vehicle. All information, specifications and illustrations in this manual are those in effect at the time of printing. INFINITI reserves the right to change specifications or design at any time without notice.

IMPORTANT INFORMATION ABOUT THIS MANUAL You will see various symbols in this manual. They are used in the following ways:

WARNING This is used to indicate the presence of a hazard that could cause death or serious personal injury. To avoid or reduce the risk, the procedures must be followed precisely. SIC0697

CAUTION This is used to indicate the presence of a hazard that could cause minor or moderate personal injury or damage to your vehicle. To avoid or reduce the risk, the procedures must be followed carefully.

If you see the symbol above, it means “Do not do this” or “Do not let this happen” .

If you see a symbol similar to those above in an illustration, it means the arrow points to the front of the vehicle.

Arrows in an illustration that are similar to those above indicate movement or action.

Arrows in an illustration that are similar to those above call attention to an item in the illustration.

CALIFORNIA PROPOSITION 65 WARNING WARNING Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Bluetooth姞 is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Visteon Corporation and Clarion Co., Ltd.

Gracenote姞 is a registered trademark of Gracenote, Inc. The Gracenote logo and logo type, and the “Powered by Gracenote” logo are trademarks of Gracenote.

CALIFORNIA PERCHLORATE ADVISORY Some vehicle parts, such as lithium batteries, may contain perchlorate material. The following advisory is provided: “Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/ hazardouswaste/perchlorate.”

XM Radio姞 requires subscription, sold separately. It is not available in Alaska, Hawaii or Guam. For more information, visit www. xmradio.com.

© 2010 NISSAN MOTOR CO., LTD. All rights reserved. No part of this Owner’s Manual may be reproduced or stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of Nissan Motor Co., Ltd.

INFINITI CUSTOMER CARE PROGRAM INFINITI CARES ... Both INFINITI and your INFINITI retailer are dedicated to serving all your automotive needs. Your satisfaction with your vehicle and your INFINITI retailer are our primary concerns. Your INFINITI retailer is always available to assist you with all your automobile sales and service needs. However, if there is something that your INFINITI retailer cannot assist you with or you would like to provide INFINITI directly with comments or questions, please contact our (INFINITI’s) Consumer Affairs Department using our toll-free number:

The Consumer Affairs Department will ask for the following information: – Your name, address, and telephone number – Vehicle identification number (on dash panel)

For U.S. customers 1-800-662-6200

– Date of purchase

For Canadian customers 1-800-361-4792

– Your INFINITI retailer’s name

– Current odometer reading

– Your comments or questions OR

You can write to INFINITI with the information on the left at: For U.S. customers INFINITI Division Nissan North America, Inc. Consumer Affairs Department P.O. Box 685003 Franklin, TN 37068-5003 For Canadian customers INFINITI Division Nissan Canada Inc. 5290 Orbitor Drive Mississauga, Ontario L4W 4Z5

We appreciate your interest in INFINITI and thank you for buying a quality INFINITI vehicle.

Table of Contents

Illustrated table of contents

0

Safety — Seats, seat belts and supplemental restraint system

1

Instruments and controls

2

Pre-driving checks and adjustments

3

Monitor, climate, audio, phone and voice recognition systems

4

Starting and driving

5

In case of emergency

6

Appearance and care

7

Maintenance and do-it-yourself

8

Technical and consumer information

9

Index

10

0 Illustrated table of contents

Seats, seat belts and supplemental restraint system (SRS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-2 Exterior front. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-3 Exterior rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-4 Exterior (Aerodynamic Package models) . . . . . . . . . . . . . 0-5 Passenger compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-6

Cockpit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-7 Instrument panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-8 Meters and gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-9 Engine compartment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-10 VQ37VHR engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-10 Warning and indicator lights . . . . . . . . . . . . . . . . . . . . . . .0-11

SEATS, SEAT BELTS AND SUPPLEMENTAL RESTRAINT SYSTEM (SRS) 9. Rear seats — Child restraints (P. 1-19) 10. Front seat-mounted side-impact supplemental air bags (P. 1-35) 11. Occupant classification sensor (pattern sensor) (P. 1-41) 12. Front passenger air bag status light (P. 1-42)

SSI0817

1. 2. 3. 4. 5.

Pop-up bar system (Page 1-49) Head restraints (P. 1-7) Seat belts (P. 1-11) Seat belts with pretensioners (P. 1-47) Door-mounted curtain side-impact supplemental air bags (P. 1-35)

0-2 Illustrated table of contents

6. Front seats (P. 1-3) 7. Supplemental front-impact air bags (P. 1-35) 8. LATCH (Lower Anchors for CHildren) system (P. 1-21)

EXTERIOR FRONT 7. Fog light (P. 2-36) 8. Tires — Wheel and tires (P. 8-27, P. 9-8) — Flat tire (P. 6-2) — Tire pressure monitoring system (TPMS) (P. 2-10, P. 5-3) 9. Outside mirrors (P. 3-35) 10. Doors — Keys (P. 3-2) — Door locks (P. 3-4) — Intelligent Key system (P. 3-6) — Remote keyless entry system (P. 3-14)

SSI0833

1. Hood (P. 3-17) 2. Headlight and turn signal — Operation (P. 2-31) — Bulb replacement (P. 8-24) — Fog light (P. 2-36)

3. Windshield wiper and washer — Operation (P. 2-28) — Maintenance (P. 8-18) 4. Power windows (P. 2-46) 5. Recovery hook (P. 6-19) 6. Front license plate installation (P. 9-12)

Illustrated table of contents 0-3

EXTERIOR REAR 8. Rear combination light (bulb replacement) (P. 8-16) 9. Fuel-filler door — Operation (P. 3-30) — Fuel recommendation (P. 9-3)

SSI0674

1. High-mounted stop light (P. 8-24) 2. Antenna (P. 4-84) — Satellite radio antenna (P. 4-38) 3. Rear window defroster (P. 2-31) 4. Retractable hard top (P. 3-18) 5. RearView Monitor camera (P. 4-22)

0-4 Illustrated table of contents

6. Trunk (P. 3-28) — Intelligent Key system (P. 3-6) — Remote keyless entry system (P. 3-14) 7. Sonar system sensors (if so equipped) (P. 5-45)

EXTERIOR (Aerodynamic Package models)

SSI0826

For Aerodynamic Package models, the vehicle parts listed below differ from the other models. Refer to the additional information in each section. 1. Recovery hook (P. 6-19) 2. License plate installation (P. 9-12)

Illustrated table of contents 0-5

PASSENGER COMPARTMENT 7. Console box (P. 2-45) — Power outlet (P. 2-41) — iPod姞 player operation (P. 4-71) — USB input operation (P. 4-62) 8. Front cup holders (P. 2-43)

SSI0818

1. Power window switch (P. 2-46) 2. Outside mirror remote control switch (P. 3-35) 3. Automatic drive positioner switch (if so equipped) (P. 3-36) 4. Sun visors (P. 3-34)

0-6 Illustrated table of contents

5. Map light (P. 2-49) 6. Inside rearview mirror — Operation (P. 3-34) — HomeLink姞 universal transceiver (if so equipped) (P. 2-51)

COCKPIT

SSI0819

1. Vehicle Dynamic Control (VDC) OFF switch (P. 5-52) 2. Trunk lid release switch (P. 3-28) 3. Sonar system OFF switch (if so equipped) (P. 5-47)

4. Instrument brightness control switch (P. 2-35) 5. TRIP/RESET switch for twin trip odometer (P. 2-5) 6. Headlight, fog light and turn signal switch (P. 2-31)

7. Paddle shifter (if so equipped) (P. 5-14) 8. Steering-wheel-mounted controls (Left side) — ENTER or tuning switch (P. 4-82) — BACK switch (P. 4-82) — TALK switch (P. 4-109)/Phone switch (P. 4-85) — Volume control switches (P. 4-82) — Source select switch (P. 4-82) 9. Trip computer switch (P. 2-23) 10. Windshield wiper and washer switch (P. 2-28) 11. Steering-wheel-mounted controls (Right side) — Cruise control switches (P. 5-19) — Intelligent Cruise Control (ICC) switches (if so equipped) (P. 5-21) 12. Hood release handle (P. 3-17) 13. Intelligent Key port (P. 5-10) 14. Electric tilting/telescopic steering wheel lever (if so equipped) (P. 3-33) 15. Manual tilting/telescopic steering wheel lever (if so equipped) (P. 3-33) 16. Steering wheel — Horn (P. 2-37) — Driver supplemental air bag (P. 1-35)

Illustrated table of contents 0-7

INSTRUMENT PANEL

SSI0671

1. 2. 3. 4. 5.

Side ventilator (P. 4-28) Meters and gauges (P. 2-4) Center ventilator (P. 4-28) Audio system (P. 4-37) Clock (P. 2-40)

0-8 Illustrated table of contents

6. Center multi-function control panel — Navigation system* (if so equipped) — Vehicle information and setting buttons (P. 4-7) — Bluetooth姞 Hands-Free Phone System (P. 4-85) — Audio system (P. 4-37) 7. Center display (P. 4-2)/Navigation system* (if so equipped) 8. Hazard warning flasher switch (P. 2-36) 9. Front passenger supplemental air bag (P. 1-35) 10. Fuse box cover (P. 8-20) 11. Parking brake (for Automatic Transmission models) — Parking (P. 5-18) 12. Push-button ignition switch (P. 5-7) 13. Automatic climate control system (P. 4-29) 14. Cigarette lighter and ashtray (if so equipped) (P. 2-42) or Storage box (if so equipped) (P. 2-46) — Power outlet (if so equipped) (P. 2-41) 15. Parking brake (for Manual Transmission models) — Parking (P. 5-18) 16. Heated seat switch (if so equipped) (P. 2-37) or Climate controlled seat switch (if so equipped) (P. 2-38) 17. Retractable hard top operating switch (P. 3-18)

METERS AND GAUGES 18. Rear window and outside mirror defogger switch (P. 2-31) 19. Glove box lid release handle (P. 2-44) 20. Trunk release power cancel switch (P. 3-29) *: Refer to the separate Navigation System Owner’s Manual.

SIC4288

1. 2. 3. 4.

Tachometer (P. 2-6) Warning/Indicator lights (P. 2-8) Speedometer (P. 2-5) Engine coolant temperature gauge (P. 2-6)

5. Dot matrix liquid crystal display/ Odometer/twin trip odometer (P. 2-16) 6. Fuel gauge (P. 2-7)

Illustrated table of contents 0-9

ENGINE COMPARTMENT 10. Drive belts location (P. 8-16) 11. Engine Coolant reservoir (P. 8-7) 12. Engine oil dipstick (P. 8-8)

SSI0345

VQ37VHR ENGINE 1. 2. 3. 4.

Fuse/fusible link holder (P. 8-20) Battery (P. 8-13) Engine oil filler cap (P. 8-8) Brake fluid reservoir (P. 8-12)

0-10 Illustrated table of contents

5. Clutch fluid reservoir (Manual Transmission models) (P. 8-12) 6. Window washer fluid reservoir (P. 8-13) 7. Power steering fluid reservoir (P. 8-11) 8. Air cleaner (P. 8-17) 9. Radiator filler cap (P. 8-7)

WARNING AND INDICATOR LIGHTS

Warning light

Name

Page

Anti-lock Braking System (ABS) warning light

2-9

Automatic Transmission check warning light*

2-9

Brake warning light

2-9

Charge warning light

2-10

Engine oil pressure warning light

2-10

Intelligent Cruise Control (ICC) system warning light (orange)*

2-10

Intelligent Key system warning light

2-10

Warning light

Name

Page

Name

Low tire pressure warning light

2-10

Automatic Transmission position indicator light*

2-13

Master warning light

2-12

Front fog light indicator light

2-13

Preview Function warning light (orange)*

2-12

Front passenger air bag status light

2-13

Seat belt warning light

2-12

High beam indicator light

2-13

Supplemental air bag warning light

2-12

Malfunction Indicator Light (MIL)

2-14

Vehicle Dynamic Control (VDC) warning light

2-13

Security indicator light

2-14

Low beam indicator light

2-15

Turn signal/hazard indicator lights

2-15

Vehicle Dynamic Control (VDC) off indicator light

2-15

Indicator light

Page

*: if so equipped

Illustrated table of contents 0-11

MEMO

0-12 Illustrated table of contents

1 Safety — Seats, seat belts and supplemental restraint system Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2 Front seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3 Head restraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-7 Seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11 Precautions on seat belt usage . . . . . . . . . . . . . . . . . . 1-11 Child safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13 Pregnant women . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14 Injured persons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14 Pre-crash seat belts (front seats) (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-15 Three-point type seat belt. . . . . . . . . . . . . . . . . . . . . . . 1-15 Seat belt guide (front seats). . . . . . . . . . . . . . . . . . . . . 1-17 Seat belt extenders. . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-18 Seat belt maintenance . . . . . . . . . . . . . . . . . . . . . . . . . .1-18 Child restraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-19 Precautions on child restraints . . . . . . . . . . . . . . . . . . 1-19 Latch Lower Anchors . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-21 Child restraint installation using LATCH lower anchors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-23

Child restraint installation using the seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-25 Booster seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-31 Precautions on booster seats. . . . . . . . . . . . . . . . . . . . 1-31 Booster seat installation . . . . . . . . . . . . . . . . . . . . . . . 1-33 Supplemental restraint system . . . . . . . . . . . . . . . . . . . . .1-35 Precautions on supplemental restraint system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-35 INFINITI Advanced Air Bag System (front seats) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-41 Front seat-mounted side-impact supplemental air bag and door-mounted curtain side-impact supplemental air bag systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-45 Seat belts with pretensioners (front seats) . . . . . . 1-47 Supplemental air bag warning labels . . . . . . . . . . . 1-48 Supplemental air bag warning light . . . . . . . . . . . . . 1-48 Repair and replacement procedure. . . . . . . . . . . . . . 1-49 Pop-up roll bar system. . . . . . . . . . . . . . . . . . . . . . . . . 1-49

SEATS

● The seatback should not be reclined further than necessary for comfort. Seat belts are most effective when the passenger sits well back and straight up in the seat. If the seatback is reclined, the risk of sliding under the lap belt and being injured is increased.

CAUTION When adjusting the seat positions, be sure not to contact any moving parts to avoid possible injuries and/or damages. SSS0133

WARNING ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. You could also slide under the lap belt and receive serious internal injuries.

● For the most effective protection when the vehicle is in motion, the seat should be upright. Always sit well back in the seat with both feet on the floor and adjust the seat belt properly. See “PRECAUTIONS ON SEAT BELT USAGE” later in this section. ● After adjustment, gently rock in the seat to make sure it is securely locked. ● Do not leave children unattended inside the vehicle. They could unknowingly activate switches or controls. Unattended children could become involved in serious accidents.

1-2 Safety — Seats, seat belts and supplemental restraint system

FRONT SEATS Front power seat adjustment Operating tips : ● The power seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait 30 seconds, then reactivate the switch. ● Do not operate the power seat switch for a long period of time when the engine is off. This will discharge the battery. See “AUTOMATIC DRIVE POSITIONER” in the “3. Pre-driving checks and adjustments” section for the seat position memory function (if so equipped).

SSS1051

Forward and backward : 1 forward or backward will Moving the switch 䊊 slide the seat forward or backward to the desired position.

can be reclined to allow occupants to rest when the vehicle is stopped and the transmission is in the P (Park) or N (Neutral) position with the parking brake fully applied.

Reclining : 2 backward until the Move the recline switch 䊊 desired angle is obtained. To bring the seatback 2 forward. forward again, move the switch 䊊

The reclining feature allows adjustment of the seatback for occupants of different sizes for added comfort and to help obtain proper seat belt fit. (See “PRECAUTIONS ON SEAT BELT USAGE” later in this section.) Also, the seatback

Safety — Seats, seat belts and supplemental restraint system 1-3

SSS1053

SSS1052

Type A

Seat lifter : Push the front or rear end of the switch up or down to adjust the angle of the front portion or height of the seat.

SSS0836

Type B

Lumbar support (if so equipped) :

Type B

The lumbar support feature provides lower back support to the driver.

1 up or down to adjust the Move the lever 䊊 seatback lumbar area.

Type A Push each side of the adjusting switch to adjust the seat lumbar area until the desired position is achieved.

1-4 Safety — Seats, seat belts and supplemental restraint system

SSS0685

SSS1057

SSS1058

Side support (if so equipped) :

Thigh extension (if so equipped) :

Passenger’s seat slide :

The side support feature provides thigh and 1 or torso supports. Push the switch inside 䊊 2 to adjust the thigh area. Push the outside 䊊 3 or outside 䊊 4 to adjust the switch inside 䊊 torso area.

The front portion of the front seats can be extended forward for seating comfort. Pull up 1 to extend the front and hold the lever 䊊 portion to the desired position.

Pushing the passenger’s seat slide switch will slide the seat forward or backward to the desired position.

Safety — Seats, seat belts and supplemental restraint system 1-5

CAUTION ● When returning the seat to its original position, confirm the seat and seatback are locked properly. ● Be careful not to pinch your hand or foot or bump your head when operating the walk-in seat. ● Do not place any objects near the seatback of the front seats. They may be pinched and damaged.

SSS0786

Walk-in mechanism : This feature makes it easier to get in and out of the rear seat. Use the following procedure when getting in and out of the rear seat. If the sun visor is used, close it to the original position before operating the walk-in feature. 1 to fold 1. Pull the seatback lever upward 䊊 the front seatback down. Make sure that the front seatback is completely folded down. 2. To slide the front seat forward, push the 2 . The front seat will seatback switch 䊊 move forward. 3. Get in or out of the vehicle.

4. To return the front seat to its original position, raise the seatback and firmly 2 again. push the seatback switch 䊊 ● To stop the seat sliding, push the seatback 2 again or push the seat sliding switch 䊊 switch. ● The front passenger seat will stop returning 7.0 in (177.6 mm) from its front-most position to retain space for the rear passenger. ● Depending on the seat position, the head restraint may contact the roof headlining during the walk-in operation. To prevent possible interference, lower the seat using the seat lifter switch.

1-6 Safety — Seats, seat belts and supplemental restraint system

● When operating the walk-in function, always release the seat belt from the seat belt guide. Otherwise, the seat belt guide may be damaged. The automatic forwarding and reversing will not work or stop under the following conditions: ● When the vehicle speed is above 4 MPH (7 km/h) (driver’s seat only). ● When the seat belt is fastened. ● When the selector lever is not in the P (Park) position (Automatic Transmission model’s driver’s seat) or the parking brake is not applied (Manual Transmission model’s driver’s seat). ● When the door is closed.

● While the automatic drive positioner operates (if so equipped). ● When the automatic drive positioner switches are pushed (if so equipped). 2 is pushed. ● When the seatback switch 䊊

● When the seat position is adjusted. Note that the seat must be moved to the front-most position by operating the walk-in function or the seat adjusting switches after the battery is disconnected. Otherwise, the seat will not move backward during the walk-in function.

HEAD RESTRAINTS WARNING Head restraints supplement the other vehicle safety systems. They may provide additional protection against injury in certain rear end collisions. Adjust the head restraints properly, as specified in this section. Check the adjustment after someone else uses the seat. Do not attach anything to the head restraint stalks or remove the head restraint. Do not use the seat if the head restraint has been removed. If the head restraint was removed, reinstall and properly adjust the head restraint before an occupant uses the seating position. Failure to follow these instructions can reduce the effectiveness of the head restraints. This may increase the risk of serious injury or death in a collision.

SSS0991

The illustration shows the seating positions equipped with head restraints. The head restraints are adjustable. Indicates the seating equipped with a head restraint.

position

is

Safety — Seats, seat belts and supplemental restraint system 1-7

SSS0992

Components 1. 2. 3. 4.

Head restraint Adjustment notches Lock knob Stalks

SSS0997

Adjustment Adjust the head restraint so the center is level with the center of your ears.

1-8 Safety — Seats, seat belts and supplemental restraint system

SSS0993

To raise the head restraint, pull it up.

CAUTION Models with a head restraint speaker (if so equipped) are designed so that the head restraint cannot be removed. The head restraint speaker may be damaged if the head restraint is forcibly pulled out.

SSS0994

To lower, push and hold the lock knob and push the head restraint down.

SSS0995

Removal Use the following procedure to remove the adjustable head restraints. 1. Pull the head restraint up to the highest position. 2. Push and hold the lock knob. 3. Remove the head restraint from the seat. 4. Store the head restraint properly in a secure place so it is not loose in the vehicle. 5. Reinstall and properly adjust the head restraint before an occupant uses the seating position.

Safety — Seats, seat belts and supplemental restraint system 1-9

Active Head Restraints operate only in certain rear-end collisions. After the collision, the head restraints return to their original positions. Adjust the Active Head Restraints properly as described earlier in this section.

SSS0996

Install 1. Align the head restraint stalks with the holes in the seat. Make sure that the head restraint is facing the correct direction. 1 The stalk with the adjustment notches 䊊 must be installed in the hole with the lock 2 . knob 䊊 2. Push and hold the lock knob and push the head restraint down. 3. Properly adjust the head restraint before an occupant uses the seating position.

SSS0508

Front-seat Active Head Restraints The Active Head Restraint moves forward utilizing the force that the seatback receives from the occupant in a rear-end collision. The movement of the head restraint helps support the occupant’s head by reducing its backward movement and helping absorb some of the forces that may lead to whiplash-type injuries. Active Head Restraints are effective for collisions at low to medium speeds in which it is said that whiplash-type injury occurs most.

1-10 Safety — Seats, seat belts and supplemental restraint system

SEAT BELTS PRECAUTIONS ON SEAT BELT USAGE If you are wearing your seat belt properly adjusted, and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced. INFINITI strongly encourages you and all of your passengers to buckle up every time you drive, even if your seating position includes a supplemental air bag. Most U.S. states and Canadian provinces or territories specify that seat belts be worn at all times when a vehicle is being driven.

SSS0136A

SSS0134A

Safety — Seats, seat belts and supplemental restraint system 1-11

WARNING ● Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly restrained in the rear seat and, if appropriate, in a child restraint.

SSS0016

SSS0014

● The seat belt should be properly adjusted to a snug fit. Failure to do so may reduce the effectiveness of the entire restraint system and increase the chance or severity of injury in an accident. Serious injury or death can occur if the seat belt is not worn properly.

● Do not allow more than one person to use the same seat belt. ● Never carry more people in the vehicle than there are seat belts. ● If the seat belt warning light glows continuously while the ignition is turned ON with all doors closed and all seat belts fastened, it may indicate a malfunction in the system. Have the system checked by an INFINITI retailer.

● Always route the shoulder belt over your shoulder and across your chest. Never put the belt behind your back, under your arm or across your neck. The belt should be away from your face and neck, but not falling off your shoulder.

● No changes should be made to the seat belt system. For example, do not modify the seat belt, add material or install devices that may change the seat belt routing or tension. Doing so may affect the operation of the seat belt system. Modifying or tampering with the seat belt system may result in serious personal injury.

● Position the lap belt as low and snug as possible AROUND THE HIPS, NOT THE WAIST. A lap belt worn too high could increase the risk of internal injuries in an accident.

● Once a seat belt pretensioner has activated, it cannot be reused and must be replaced together with the retractor. See an INFINITI retailer.

● Be sure the seat belt tongue is securely fastened to the proper buckle.

● Removal and installation of the pretensioner system components should be done by an INFINITI retailer.

● Do not wear the seat belt inside out or twisted. Doing so may reduce its effectiveness.

1-12 Safety — Seats, seat belts and supplemental restraint system

● All seat belt assemblies, including retractors and attaching hardware, should be inspected after any collision by an INFINITI retailer. INFINITI recommends that all seat belt assemblies in use during a collision be replaced unless the collision was minor and the belts show no damage and continue to operate properly. Seat belt assemblies not in use during a collision should also be inspected and replaced if either damage or improper operation is noted. ● All child restraints and attaching hardware should be inspected after any collision. Always follow the restraint manufacturer’s inspection instructions and replacement recommendations. The child restraints should be replaced if they are damaged.

CHILD SAFETY

WARNING

Children need adults to help protect them. They need to be properly restrained. In addition to the general information in this manual, child safety information is available from many other sources, including doctors, teachers, government traffic safety offices, and community organizations. Every child is different, so be sure to learn the best way to transport your child. There are three basic types of child restraint systems: ● Rear-facing child restraint ● Front-facing child restraint ● Booster seat The proper restraint depends on the child’s size. Generally, infants (up to about 1 year and less than 20 lb (9 kg)) should be placed in rear-facing child restraints. Front-facing child restraints are available for children who outgrow rear-facing child restraints and are at least 1 year old. Booster seats are used to help position a vehicle lap/shoulder belt on a child who can no longer use a front-facing child restraint.

Infants and children need special protection. The vehicle’s seat belts may not fit them properly. The shoulder belt may come too close to the face or neck. The lap belt may not fit over their small hip bones. In an accident, an improperly fitting seat belt could cause serious or fatal injury. Always use appropriate child restraints. All U.S. states and Canadian provinces or territories require the use of approved child restraints for infants and small children. (See “CHILD RESTRAINTS” later in this section.) Also, there are other types of child restraints available for larger children for additional protection. INFINITI recommends that all pre-teens and children be restrained in the rear seat. According to accident statistics, children are safer when properly restrained in the rear seat than in the front seat. This is especially important because your vehicle has a supplemental restraint system (air bag system) for the front passenger. (See “SUPPLEMENTAL RESTRAINT SYSTEM” later in this section.)

Safety — Seats, seat belts and supplemental restraint system 1-13

Infants

Larger children

Infants up to at least 1 year old should be placed in a rear-facing child restraint. INFINITI recommends that infants be placed in child restraints that comply with Federal Motor Vehicle Safety Standards or Canadian Motor Vehicle Safety Standards. You should choose a child restraint which fits your vehicle and always follow the manufacturer’s instructions for installation and use.

Children who are too large for child restraints should be seated and restrained by the seat belts which are provided. The seat belt may not fit properly if the child is less than 4 ft 9 in (142.5 cm) tall and weighs between 40 lb (18 kg) and 80 lb (36 kg). A booster seat should be used to obtain proper seat belt fit.

Small children Children that are over 1 year old and weigh at least 20 lb (9 kg) can be placed in a forwardfacing child restraint. Refer to the manufacturer’s instructions for minimum and maximum weight and height recommendations. INFINITI recommends that small children be placed in child restraints that comply with Federal Motor Vehicle Safety Standards or Canadian Motor Vehicle Safety Standards. You should choose a child restraint that fits your vehicle and always follow the manufacturer’s instructions for installation and use.

INFINITI recommends that a child be placed in a commercially available booster seat if the shoulder belt in the child’s seating position fits close to the face or neck or if the lap portion of the seat belt goes across the abdomen. The booster seat should raise the child so that the shoulder belt is properly positioned across the top, middle portion of the shoulder and the lap belt is low on the hips. A booster seat can only be used in seating positions that have a threepoint type seat belt. The booster seat should fit the vehicle seat and have a label certifying that it complies with Federal Motor Vehicle Safety Standards or Canadian Motor Vehicle Safety Standards. Once the child has grown so the shoulder belt is no longer on or near the face and neck, use the shoulder belt without the booster seat.

1-14 Safety — Seats, seat belts and supplemental restraint system

WARNING Never let a child stand or kneel on any seat and do not allow a child in the cargo areas while the vehicle is moving. The child could be seriously injured or killed in an accident or sudden stop.

PREGNANT WOMEN INFINITI recommends that pregnant women use seat belts. The seat belt should be worn snug, and always position the lap belt as low as possible around the hips, not the waist, and place the shoulder belt over your shoulder and across your chest. Never run the lap/shoulder belt over your abdominal area. Contact your doctor for specific recommendations.

INJURED PERSONS INFINITI recommends that injured persons use seat belts, depending on the injury. Check with your doctor for specific recommendations.

PRE-CRASH SEAT BELTS (front seats) (if so equipped) The pre-crash seat belt tightens the seat belt to help restrain front seat occupants under emergency braking. This can help reduce the risk of injury when a collision occurs. Pre-crash seat belt will not be activated when: ● the brake pedal is not depressed ● the seat belt is not fastened ● the vehicle speed is under 10 MPH (15 km/h) Always wear your seat belt correctly and sit upright and well back. If the seat belt warning light blinks even if the driver’s and front passenger’s seat belts are fastened, it may indicate the pre-crash seat belt system has a malfunction. Have your INFINITI retailer check and repair the system.

THREE-POINT TYPE SEAT BELT WARNING ● Every person who drives or rides in this vehicle should use a seat belt at all times. ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. You could also slide under the lap belt and receive serious internal injuries. ● For the most effective protection when the vehicle is in motion, the seat should be upright. Always sit well back in the seat with both feet on the floor and adjust the seat belt properly.

SSS0292

Fastening the seat belts 1. Adjust the seat. (See “SEATS” earlier in this section.) 2. Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage. ● The retractor is designed to lock during a sudden stop or on impact. A slow pulling motion permits the belt to move, and allows you some freedom of movement in the seat.

Safety — Seats, seat belts and supplemental restraint system 1-15

● If the seat belt cannot be pulled from its fully retracted position, firmly pull the belt and release it. Then smoothly pull the belt out of the retractor.

of movement in the seat. The ELR locks the seat belt when the vehicle slows down rapidly or during impacts. The Automatic Locking Retractor (ALR) mode (child restraint mode) locks the seat belt for child restraint installation.

SSS0290

3. Position the lap belt portion low and snug on the hips as shown. 4. Pull the shoulder belt portion toward the retractor to take up extra slack. Be sure the shoulder belt is routed over your shoulder and across your chest. The three-point type seat belts have two modes of operation: ● Emergency Locking Retractor (ELR) ● Automatic Locking Retractor (ALR) The Emergency Locking Retractor (ELR) mode allows the seat belt to extend and retract to allow the driver and passengers some freedom

1-16 Safety — Seats, seat belts and supplemental restraint system

When the ALR mode is activated the seat belt cannot be extended again until the seat belt tongue is detached from the buckle and fully retracted. The seat belt returns to the ELR mode after the seat belt fully retracts. For additional information, see “CHILD RESTRAINTS” later in this section. The ALR mode should be used only for child restraint installation. During normal seat belt use by an occupant, the ALR mode should not be activated. If it is activated it may cause uncomfortable seat belt tension.

WARNING When fastening the seat belts, be certain that seatbacks are completely secured in the latched position. If they are not completely secured, passengers may be injured in an accident or sudden stop.

To increase your confidence in the seat belts, check the operation as follows: ● Grasp the shoulder belt and pull forward quickly. The retractor should lock and restrict further belt movement. If the retractor does not lock during this check or if you have any question about seat belt operation, see an INFINITI retailer.

SSS0326

SSS0980

Unfastening the seat belts

SEAT BELT GUIDE (front seats)

To unfasten the seat belt, push the button on the buckle. The seat belt automatically retracts.

When the seat belt guide is used with the front seat, the seat belt can easily be pulled out.

Checking seat belt operation

Release the seat belt guide, clip the seat belt and install the seat belt guide again.

Seat belt retractors are designed to lock seat belt movement by two separate methods: ● When the belt is pulled quickly from the retractor. ● When the vehicle slows down rapidly.

When using the seat belt guide, do not allow it to twist.

WARNING When using the seat belt guide, make sure that the seat belt guide is securely installed to the seat. Otherwise, the seat belt may slip and result in personal injury.

Safety — Seats, seat belts and supplemental restraint system 1-17

CAUTION ● When entering or exiting the rear seat, or inserting or retrieving luggage with the seatback folded down, always release the seat belt guide. Otherwise, the seat belt guide may be damaged. ● Do not fold the seat forward or pull it backward by holding the seat belt guide in your hand. Doing so may damage the seat belt guide.

SEAT BELT EXTENDERS If, because of body size or driving position, it is not possible to properly fit the lap-shoulder belt and fasten it, an extender that is compatible with the installed seat belts is available that can be purchased. The extender adds approximately 8 in (200 mm) of length and may be used for either the driver or front passenger seating position. See an INFINITI retailer for assistance with purchasing an extender if an extender required.

WARNING ● Only INFINITI seat belt extenders, made by the same company which made the original equipment seat belts, should be used with the INFINITI seat belts. ● Adults and children who can use the standard seat belt should not use an extender. Such unnecessary use could result in serious personal injury in the event of an accident. ● Never use seat belt extenders to install child restraints. If the child restraint is not secured properly, the child could be seriously injured in a collision or a sudden stop.

SEAT BELT MAINTENANCE ● To clean the seat belt webbing, apply a mild soap solution or any solution recommended for cleaning upholstery or carpets. Then, wipe with a cloth and allow the seat belts to dry in the shade. Do not allow the seat belts to retract until they are completely dry.

1-18 Safety — Seats, seat belts and supplemental restraint system

● If dirt builds up in the shoulder belt guide of the seat belt anchors, the seat belts may retract slowly. Wipe the shoulder belt guide with a clean, dry cloth. ● Periodically check to see that the seat belt and the metal components such as buckles, tongues, retractors, flexible wires and anchors work properly. If loose parts, deterioration, cuts or other damage on the webbing is found, the entire seat belt assembly should be replaced.

CHILD RESTRAINTS PRECAUTIONS ON CHILD RESTRAINTS WARNING ● Infants and small children should always be placed in an appropriate child restraint while riding in the vehicle. A child restraint that requires a top tether strap for installation should not be used in this vehicle. Failure to use a child restraint can result in serious injury or death. SSS0099

● Infants and small children should never be carried on your lap. It is not possible for even the strongest adult to resist the forces of a severe accident. The child could be crushed between the adult and parts of the vehicle. Also, do not put the same seat belt around both your child and yourself. ● Even with the INFINITI Advanced Air Bag System, never install a rear-facing child restraint in the front seat. An inflating supplemental front air bag could seriously injure or kill your child. A rear-facing child restraint must only be used in the rear seat.

SSS0100

● INFINITI recommends that the child restraint be installed in the rear seat. According to accident statistics, children are safer when properly restrained in the rear seat than in the front seat. If you must install a frontfacing child restraint in the front seat, see “CHILD RESTRAINT INSTALLATION USING THE SEAT BELTS” later in this section. ● Improper use or improper installation of a child restraint can increase the risk or severity of injury for both the child and other occupants of the vehicle and can lead to serious injury or death in an accident. ● Follow all of the child restraint manufacturer’s instructions for installation and use. When purchasing a child restraint, be sure to select one which will fit your child and vehicle. It may not be possible to properly install some types of child restraints in your vehicle. ● This vehicle is not equipped with upper tethers. A child restraint system requiring the use of a top tether strap cannot be properly installed and should not be used in this vehicle. ● If the child restraint is not anchored properly, the risk of a child being injured in a collision or a sudden stop greatly increases.

Safety — Seats, seat belts and supplemental restraint system 1-19

● Child restraint anchor points are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used for adult seat belts or harnesses. ● Adjustable seatbacks should be positioned to fit the child restraint, but as upright as possible. ● After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the seat near the lower LATCH attachment or by the seat belt path. The child restraint should not move more than 1 inch (25 mm) from side to side. Try to tug it forward and check to see if the belt holds the restraint in place. If the restraint is not secure, tighten the belt as necessary, or put the restraint in another seat and test it again. You may need to try a different child restraint. Not all child restraints fit in all types of vehicles. ● When your child restraint is not in use, keep it secured with the LATCH lower anchors or a seat belt to prevent it from being thrown around in case of a sudden stop or accident.

CAUTION Remember that a child restraint left in a closed vehicle can become very hot. Check the seating surface and buckles before placing your child in the child restraint. This vehicle is equipped with a universal child restraint lower anchor system, referred to as part of the Lower Anchors and Tethers for CHildren System or LATCH. Some child restraints include two rigid or webbing-mounted attachments that can be connected to these lower anchors. For details, see “LATCH Lower Anchors” later in this section. LATCH child restraints generally require the use of a top tether strap. However, this vehicle does not have top tether anchor locations. Do not install a child restraints in this vehicle that requires the use of a top tether strap. If you do not have a LATCH compatible child restraint, the vehicle seat belts can be used. (See “CHILD RESTRAINT INSTALLATION USING THE SEAT BELTS” later in this section.) In general, child restraints are also designed to be installed with the lap portion of a lap/shoulder seat belt.

1-20 Safety — Seats, seat belts and supplemental restraint system

Several manufacturers offer child restraints for infants and small children of various sizes. When selecting any child restraint, keep the following points in mind: ● Choose only a restraint with a label certifying that it complies with Federal Motor Vehicle Safety Standard 213 or Canadian Motor Vehicle Safety Standard 213. ● Check the child restraint in your vehicle to be sure it is compatible with the vehicle’s seat and seat belt system. ● If the child restraint is compatible with your vehicle, place your child in the child restraint and check the various adjustments to be sure the child restraint is compatible with your child. Choose a child restraint that is designed for your child’s height and weight. Always follow all recommended procedures.

All U.S. states and Canadian provinces or territories require that infants and small children be restrained in an approved child restraint at all times while the vehicle is being operated. Canadian law requires the top tether strap on frontfacing child restraints to be secured to the designated anchor point on the vehicle.

SSS0933

LATCH label location

SSS0637

LATCH lower anchor location

LATCH LOWER ANCHORS

LATCH lower anchor point locations

Your vehicle is equipped with special lower anchor points that are used with Lower Anchors for CHildren (LATCH) compatible child restraints. These lower anchors may also be referred to an ISOFIX or ISOFIX compatible system. With these lower anchors, you do not have to use a vehicle seat belt to secure the child restraint.

The LATCH lower anchors are located at the rear of the seat cushion near the seatback. A label is attached to the seatback to help you locate the LATCH lower anchors.

The LATCH lower anchor points are provided to install child restraints in the rear outboard seating positions only. Do not attempt to install a child restraint in the center position using the LATCH lower anchors.

WARNING ● Attach LATCH system compatible child restraints only at the locations shown in the illustration. If a child restraint is not secured properly, your child could be seriously injured or killed in an accident.

Safety — Seats, seat belts and supplemental restraint system 1-21

● Do not secure a child restraint in the center rear position using the LATCH lower anchors. The child restraint will not be secured properly. ● Child restraint anchor points are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used for adult seat belts or harnesses.

SSS0648

SSS0649

LATCH webbing-mounted attachment

LATCH rigid attachment

Installing child restraint LATCH lower anchor attachments

When installing a child restraint, carefully read and follow the instructions in this manual and those supplied with the child restraint.

LATCH compatible child restraints include two rigid or webbing-mounted attachments that can be connected to two anchors located at certain seating positions in your vehicle. With this system, you do not have to use a vehicle seat belt to secure the child restraint. Check your child restraint for a label stating that it is compatible with LATCH. This information may also be in the instructions provided by the child restraint manufacturer.

1-22 Safety — Seats, seat belts and supplemental restraint system

CHILD RESTRAINT INSTALLATION USING LATCH LOWER ANCHORS WARNING ● Attach LATCH compatible child restraints only at the locations shown. For the LATCH lower anchor locations, see “LATCH Lower Anchors” earlier in this section. If a child restraint is not secured properly, your child could be seriously injured or killed in an accident. ● The LATCH lower anchors are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstance are they to be used for adult seat belts or harnesses. ● Inspect the lower anchors by inserting your fingers into the lower anchor area and feeling to make sure there are no obstructions over the LATCH lower anchors, such as seat belt webbing or seat cushion material. The child restraint will not be secured properly if the LATCH lower anchors are obstructed.

SSS0648

Rear-facing (webbing-mounted) — step 2

Rear-facing Follow these steps to install a rear-facing child restraint using LATCH lower anchors: 1. Position the child restraint on the seat. Always follow the child restraint manufacturer’s instructions.

SSS0649

Rear-facing (rigid-mounted) — step 2 2. Secure the child restraint anchor attachments to the LATCH lower anchors. Check to make sure the LATCH attachment is properly attached to the lower anchor.

● This vehicle is not equipped with upper tethers. A child restraint system requiring the use of a top tether strap cannot be properly installed and should not be used in this vehicle.

Safety — Seats, seat belts and supplemental restraint system 1-23

5. Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 3 through 4.

SSS0639

SSS0650

Rear-facing — step 3

Rear-facing — step 4

3. For child restraints that are equipped with webbing mounted attachments, remove any additional slack from the anchor attachments. Press downward and rearward firmly in the center of the child restraint with your hand to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments.

4. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the seat near the LATCH attachment path. The child restraint should not move more than 1 inch (25 mm) from side to side. Try to tug it forward and check to see if the LATCH attachment holds the restraint in place. If the restraint is not secure, tighten the LATCH attachment as necessary, or put the restraint in another seat and test it again. You may need to try a different child restraint. Not all child restraints fit in all types of vehicles.

1-24 Safety — Seats, seat belts and supplemental restraint system

● INFINITI recommends that child restraints be installed in the rear seat. However, if you must install a child restraint in the front passenger seat, move the passenger seat to the rearmost position. Also, be sure the front passenger air bag status light is illuminated to indicate the passenger air bag is OFF. See “Front passenger air bag and status light” later in this section for details.

SSS0100

CHILD RESTRAINT INSTALLATION USING THE SEAT BELTS WARNING ● Even with the INFINITI Advanced Air Bag System, never install a rear-facing child restraint in the front passenger seat. Supplemental front air bags inflate with great force. A rear-facing child restraint could be struck by the supplemental front air bag in a crash and could seriously injure or kill your child.

The instructions in this section apply to child restraint installation using the vehicle seat belts in the rear seat or the front passenger seat.

● The three-point seat belt in your vehicle is equipped with an Automatic Locking Retractor (ALR) which must be used when installing a child restraint. ● Failure to use the ALR will result in the child restraint not being properly secured. The restraint could tip over or otherwise be unsecured and cause injury to the child in a sudden stop or collision. ● This vehicle is not equipped with upper tethers. A child restraint system requiring the use of a top tether strap cannot be properly installed and should not be used in this vehicle.

Safety — Seats, seat belts and supplemental restraint system 1-25

2. Position the child restraint on the seat. Always follow the child restraint manufacturer’s instructions. The back of the child restraint should be secured against the seatback. If necessary, adjust or remove the head restraint (front passenger seat only) to obtain the correct child restraint fit. (See “HEAD RESTRAINTS” earlier in this section.)

SSS0640

Front-facing (front passenger seat) — step 1

Front-facing Follow these steps to install a front-facing child restraint using the vehicle seat belt in the rear seat or in the front passenger seat. A child restraint that requires a top tether strap for installation should not be used in this vehicle. 1. If you must install a child restraint in the front seat, it should be placed in a frontfacing direction only. Move the seat to the rearmost position. Child restraints for infants must be used in the rear-facing direction and therefore must not be used in the front seat.

If the head restraint is removed, store it in a secure place. Be sure to reinstall the head restraint when the child restraint is removed. The head restraint of models with a head restraint speaker (if so equipped) cannot be removed. If the seating position does not have an adjustable head restraint and it is interfering with the proper child restraint fit, try another seating position or a different child restraint.

1-26 Safety — Seats, seat belts and supplemental restraint system

SSS0360B

Front-facing — step 3 3. Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the child restraint manufacturer’s instructions for belt routing.

SSS0651

SSS0652

SSS0653

Front-facing — step 4

Front-facing — step 5

Front-facing — step 6

4. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode). It reverts to Emergency Locking Retractor (ELR) mode when the seat belt is fully retracted.

5. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt.

6. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while pulling up on the seat belt.

Safety — Seats, seat belts and supplemental restraint system 1-27

8. Check that the retractor is in the ALR mode by trying to pull more seat belt out of the retractor. If you cannot pull any more belt webbing out of the retractor, the retractor is in the ALR mode. 9. Check to make sure the child restraint is properly secured prior to each use. If the seat belt is not locked, repeat steps 3 through 8.

SSS0641

SSS0676

Front-facing — step 7

Forward-facing — step 10

7. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the seat near the seat belt path. The child restraint should not move more than 1 inch (25 mm) from side to side. Try to tug it forward and check to see if the belt holds the restraint in place. If the restraint is not secure, tighten the belt as necessary, or put the restraint in another seat and test it again. You may need to try a different child restraint. Not all child restraints fit in all types of vehicles.

10. If the child restraint is installed in the front passenger seat, push the ignition switch to the ON position. The front passenger air bag status light should illuminate. If this light is not illuminated, see “Front passenger air bag and status light” later in this section. Move the child restraint to another seating position . Have the system checked by an INFINITI retailer.

1-28 Safety — Seats, seat belts and supplemental restraint system

After the child restraint is removed and the seat belt is fully retracted, the ALR mode (child restraint mode) is canceled.

SSS0654

SSS0100

Rear-facing Follow these steps to install a rear-facing child restraint using the vehicle seat belt in the rear seat: 1. Child restraints for infants must be used in the rear-facing direction and therefore must not be used in the front seat. Position the child restraint on the seat. Always follow the restraint manufacturer’s instructions.

SSS0655

Rear-facing — step 2

Rear-facing — step 3

2. Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the child restraint manufacturer’s instructions for belt routing.

3. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode). It reverts to Emergency Locking Retractor (ELR) mode when the seat belt is fully retracted.

Safety — Seats, seat belts and supplemental restraint system 1-29

SSS0656

SSS0657

SSS0658

Rear-facing — step 4

Rear-facing — step 5

Rear-facing — step 6

4. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt.

5. Remove any additional slack from the child restraint; press downward and rearward firmly in the center of the child restraint with your hand to compress the vehicle seat cushion and seatback while pulling up on the seat belt.

6. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the seat near the seat belt path. The child restraint should not move more than 1 inch (25 mm) from side to side. Try to tug it forward and check to see if the belt holds the restraint in place. If the restraint is not secure, tighten the belt as necessary, or put the restraint in another seat and test it again. You may need to try a different child restraint. Not all child restraints fit in all types of vehicles.

1-30 Safety — Seats, seat belts and supplemental restraint system

BOOSTER SEATS 7. Check that the retractor is in the ALR mode by trying to pull more seat belt out of the retractor. If you cannot pull any more seat belt webbing out of the retractor, the retractor is in the ALR mode. 8. Check to make sure that the child restraint is properly secured prior to each use. If the seat belt is not locked, repeat steps 3 through 7.

● INFINITI recommends that the booster seat be installed in the rear seat. According to accident statistics, children are safer when properly restrained in the rear seat than in the front seat. If you must install a booster seat in the front seat, see “BOOSTER SEAT INSTALLATION” later in this section.

After the child restraint is removed and the seat belt fully retracted, the ALR mode (child restraint mode) is canceled. SSS0099

PRECAUTIONS ON BOOSTER SEATS WARNING ● Infants and small children should always be placed in an appropriate child restraint while riding in the vehicle. Failure to use a child restraint or booster seat can result in serious injury or death. ● Infants and small children should never be carried on your lap. It is not possible for even the strongest adult to resist the forces of a severe accident. The child could be crushed between the adult and parts of the vehicle. Also, do not put the same seat belt around both your child and yourself.

● A booster seat must only be installed in a seating position that has a lap/shoulder belt. Failure to use a three-point type seat belt with a booster seat can result in a serious injury in sudden stop or collision. ● Improper use or improper installation of a booster seat can increase the risk or severity of injury for both the child and other occupants of the vehicle and can lead to serious injury or death in an accident. ● Do not use towels, books, pillows or other items in place of a booster seat. Items such as these may move during normal driving or a collision and result in serious injury or death. Booster seats are designed to be used with a lap/shoulder belt. Booster seats are designed to properly route the lap and shoulder portions of the seat belt over the strongest portions of a child’s body to provide the maximum protection during a collision.

Safety — Seats, seat belts and supplemental restraint system 1-31

● Follow all of the booster seat manufacturer’s instructions for installation and use. When purchasing a booster seat, be sure to select one which will fit your child and vehicle. It may not be possible to properly install some types of booster seats in your vehicle.

CAUTION Remember that a booster seat left in a closed vehicle can become very hot. Check the seating surface and buckles before placing your child in the booster seat.

● If the booster seat and seat belt is not used properly, the risk of a child being injured in a collision or a sudden stop greatly increases. ● Adjustable seatbacks should be positioned to fit the booster seat, but as up- right as possible. ● After placing the child in the booster seat and fastening the seat belt, make sure the shoulder portion of the belt is away from the child’s face and neck and the lap portion of the belt does not cross the abdomen. ● Do not put the shoulder belt behind the child or under the child’s arm. If you must install a booster seat in the front seat, see “BOOSTER SEAT INSTALLATION” later in this section. ● When your booster seat is not in use, keep it secured with a seat belt to prevent it from being thrown around in case of a sudden stop or accident.

1-32 Safety — Seats, seat belts and supplemental restraint system

LRS0455

Booster seats of various sizes are offered by several manufacturers. When selecting any booster seat, keep the following points in mind: ● Choose only a booster seat with a label certifying that it complies with Federal Motor Vehicle Safety Standard 213 or Canadian Motor Vehicle Safety Standard 213.

BOOSTER SEAT INSTALLATION WARNING INFINITI recommends that booster seats be installed in the rear seat. However, if you must install a booster seat in the front passenger seat, move the passenger’s seat to the rearmost position.

CAUTION LRS0453

LRS0464

● Check the booster seat in your vehicle to be sure it is compatible with the vehicle’s seat and seat belt system.

● If the booster seat is compatible with your vehicle, place your child in the booster seat and check the various adjustments to be sure the booster seat is compatible with your child. Always follow all recommended procedures.

● Make sure the child’s head will be properly supported by the booster seat or vehicle seat. The seatback must be at or above the center of the child’s ears. For example, if a 1 is chosen, the low back booster seat 䊊 vehicle seatback must be at or above the center of the child’s ears. If the seatback is lower than the center of the child’s ears, a 2 should be used. high back booster seat 䊊

Do not use the lap/shoulder belt Automatic Locking Retractor (ALR) mode when using a booster seat with the seat belts. Follow these steps to install a booster seat in the rear seat or in the front passenger seat:

All U.S. states and Canadian provinces or territories require that infants and small children be restrained in an approved child restraint at all times while the vehicle is being operated. The instructions in this section apply to booster seat installation in the rear seats or the front passenger seat.

Safety — Seats, seat belts and supplemental restraint system 1-33

LRS0452

SSS0640

1. If you must install a booster seat in the front seat, adjust the seatback so that it is upright and then move the seat to the rearmost position. Do not move the seat with the booster seat attached to it. 2. Position the booster seat on the seat. Only place it in a front-facing direction. Always follow the booster seat manufacturer’s instructions.

LRS0454

Outboard position

Front seat

3. The booster seat should be positioned on the vehicle seat so that it is stable. If necessary, adjust or remove the head restraint (front passenger seat only) to obtain the correct booster seat fit. (See “HEAD RESTRAINTS” earlier in this section.)

If the seating position does not have an adjustable head restraint and it is interfering with the proper booster seat fit, try another seating position or a different booster seat. 4. Position the lap portion of the seat belt low and snug on the child’s hips. Be sure to follow the booster seat manufacturer’s instructions for adjusting the belt routing.

If the head restraint is removed, store it in a secure place. Be sure to reinstall the head restraint when the booster seat is removed.

1-34 Safety — Seats, seat belts and supplemental restraint system

SUPPLEMENTAL RESTRAINT SYSTEM PRECAUTIONS ON SUPPLEMENTAL RESTRAINT SYSTEM

5. Pull the shoulder belt portion of the seat belt toward the retractor to take up extra slack. Be sure the shoulder belt is positioned across the top, middle portion of the child’s shoulder. Be sure to follow the booster seat manufacturer’s instructions for adjusting the belt routing. 6. Follow the warnings, cautions and instructions for properly fastening a seat belt shown in the “THREE-POINT TYPE SEAT BELT” earlier in this section.

This Supplemental Restraint System (SRS) section contains important information concerning the driver and passenger front impact supplemental air bags (INFINITI Advanced Air Bag System), front seat-mounted side-impact supplemental air bag system, door-mounted curtain side-impact supplemental air bag and seat belt with pretensioners. SSS0676

7. If the booster seat is installed in the front passenger seat, push the ignition switch to the ON position. The front passenger may or may not air bag status light illuminate depending on the size of the child and the type of booster seat used. (See “Front passenger air bag and status light” later in this section.)

Supplemental front-impact air bag system: The INFINITI Advanced Air Bag System can help cushion the impact force to the head and chest of the driver and front passenger in certain frontal collisions. Front seat-mounted side-impact supplemental air bag system: This system can help cushion the impact force to the chest and pelvis area of the driver and front passenger in certain side impact collisions. The front seat side-impact supplemental air bags are designed to inflate on the side where the vehicle is impacted. Door-mounted curtain side-impact supplemental air bag system: This system can help cushion the impact force to the head of occupants in front seating positions in certain side impact or rollover collisions. The curtain air bags are designed to inflate on the side where the vehicle is impacted.

Safety — Seats, seat belts and supplemental restraint system 1-35

These supplemental restraint systems are designed to supplement the crash protection provided by the driver and passenger seat belts and are not a substitute for them. Seat belts should always be correctly worn and the occupant seated a suitable distance away from the steering wheel, instrument panel and door finishers. (See “SEAT BELTS” earlier in this section for instructions and precautions on seat belt usage.) The supplemental air bags operate only when the ignition switch is in the ON position. After pushing the ignition switch to the ON position, the supplemental air bag warning light illuminates. The supplemental air bag warning light will turn off after about 7 seconds if the systems are operational.

SSS0131B

SSS0132B

1-36 Safety — Seats, seat belts and supplemental restraint system

WARNING ● The supplemental front air bags ordinarily will not inflate in the event of a side impact, rear impact, rollover, or lower severity frontal collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents. ● The front passenger air bag will not inflate if the passenger air bag status light is lit or if the front passenger seat is unoccupied. See “Front passenger air bag and status light” later in this section. ● The seat belts and the supplemental front air bags are most effective when you are sitting well back and upright in the seat with both feet on the floor. The front air bags inflate with great force. Even with the INFINITI Advanced Air Bag System, if you are unrestrained, leaning forward, sitting sideways or out of position in any way, you are at greater risk of injury or death in a crash. You may also receive serious or fatal injuries from the supplemental front air bag if you are up against it when it inflates. Always sit back against the seatback and as far-away as practical from the steering wheel or instrument panel. Always use the seat belts.

● The driver and front passenger seat belt buckles are equipped with sensors that detect if the seat belts are fastened. The Advanced Air Bag System monitors the severity of a collision and seat belt usage then inflates the air bags. Failure to properly wear seat belts can increase the risk or severity of injury in an accident. ● The front passenger seat is equipped with an occupant classification sensor (pattern sensor) that turns the front passenger air bag OFF under some conditions. This sensor is only used in this seat. Failure to be properly seated and wearing the seat belt can increase the risk or severity of injury in an accident. See “Front passenger air bag and status light” later in this section.

SSS0007

● Keep hands on the outside of the steering wheel. Placing them inside the steering wheel rim could increase the risk of injury if the supplemental front air bag inflates.

SSS0006

Safety — Seats, seat belts and supplemental restraint system 1-37

WARNING ● Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations.

SSS0008

SSS0099

● Children may be severely injured or killed when the front air bags, side air bags or curtain air bags inflate if they are not properly restrained. Pre-teens and children should be properly restrained in the rear seat, if possible. ● Even with the INFINITI Advanced Air Bag System, never install a rear-facing child restraint in the front seat. An inflating front air bag could seriously injure or kill your child. See “CHILD RESTRAINTS” earlier in this section for details.

SSS0009

1-38 Safety — Seats, seat belts and supplemental restraint system

SSS0100

WARNING Front seat-mounted side-impact supplemental air bags and door-mounted curtain side-impact supplemental air bags: ● The front seat-mounted side-impact air bags and door-mounted curtain air bags ordinarily will not inflate in the event of a frontal impact, rear impact or lower severity side collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents. SSS0059A

SSS0162

SSS0981

SSS0159

● The seat belts, side air bags and curtain air bags are most effective when you are sitting well back and upright in the seat. The side air bag and curtain air bag inflate with great force. Do not allow anyone to place their hand, leg or face near the side air bag on the side of the seatback of the front seat or near the door finishers. Do not allow anyone sitting in the front seats or rear outboard seats to extend their hand out of the window or lean against the door. Some examples of dangerous riding positions are shown in the previous illustrations.

Safety — Seats, seat belts and supplemental restraint system 1-39

● When sitting in the rear seat, do not hold onto the seatback of the front seat. If the supplemental side air bag inflates, you may be seriously injured. Be especially careful with children, who should always be properly restrained. Some examples of dangerous riding positions are shown in the illustrations. ● Do not use seat covers on the front seatbacks. They may interfere with supplemental side air bag inflation.

SSS0934

1. Crash zone sensor 2. Supplemental front air bag modules (INFINITI Advanced Air Bags) 3. Front seat-mounted side-impact supplemental air bags

1-40 Safety — Seats, seat belts and supplemental restraint system

4. Occupant classification system control unit 5. Occupant classification sensor (pattern sensor) 6. Pop-up roll bars

7. Door-mounted curtain side-impact supplemental air bag inflators 8. Door-mounted curtain side-impact supplemental air bags 9. Satellite sensors 10. Seat belt with pretensioners 11. Air bag Control Unit (ACU)

INFINITI ADVANCED AIR BAG SYSTEM (front seats) This vehicle is equipped with the INFINITI Advanced Air Bag System for the driver and front passenger seats. This system is designed to meet certification requirements under U.S. regulations. It is also permitted in Canada. However, all of the information, cautions and warnings in this manual still apply and must be followed. The driver supplemental front-impact air bag is located in the center of the steering wheel. The front passenger supplemental front-impact air bag is mounted in the instrument panel above the glove box. The front air bags are designed to inflate in higher severity frontal collisions, although they may inflate if the forces in another type of collision are similar to those of a higher severity frontal impact. They may not inflate in certain frontal collisions. Vehicle damage (or lack of it) is not always an indication of proper front air bag operation.

The INFINITI Advanced Air Bag System has dual stage air bag inflators. The system monitors information from the crash zone sensor, the Air bag Control Unit (ACU), seat belt buckle switches and the occupant classification sensor (pattern sensor). Inflator operation is based on the severity of a collision and seat belt usage for the driver. For the front passenger, the occupant classification sensor is also monitored. Based on information from the sensors, only one front air bag may inflate in a crash, depending on the crash severity and whether the front occupants are belted or unbelted. Additionally, the front passenger air bag may be automatically turned OFF under some conditions, depending on the information provided by the occupant classification sensor. If the front passenger air bag is OFF, the passenger air bag status light will be illuminated (if the seat is unoccupied, the light will not be illuminated, but the air bag will be off). (See “Front passenger air bag and status light” later in this section for further details.) One front air bag inflating does not indicate improper performance of the system. If you have any questions about your air bag system, contact an INFINITI retailer. If you are considering modification of your vehicle due to a disability, you may also contact INFINITI. Contact information is contained in the front of this Owner’s Manual.

When a front air bag inflates, a fairly loud noise may be heard, followed by release of smoke. This smoke is not harmful and does not indicate a fire. Care should be taken not to inhale it, as it may cause irritation and choking. Those with a history of a breathing condition should get fresh air promptly. Front air bags, along with the use of seat belts, help to cushion the impact force on the head and chest of the front occupants. They can help save lives and reduce serious injuries. However, an inflating front air bag may cause facial abrasions or other injuries. Front air bags do not provide restraint to the lower body. Even with INFINITI Advanced Air Bags, seat belts should be correctly worn and the driver and passenger seated upright as far as practical away from the steering wheel or instrument panel. The front air bags inflate quickly in order to help protect the front occupants. Because of this, the force of the front air bag inflating can increase the risk of injury if the occupant is too close to, or is against, the air bag module during inflation. The front air bags deflate quickly after a collision. The supplemental front air bags operate only when the ignition switch is in the ON position.

Safety — Seats, seat belts and supplemental restraint system 1-41

After pushing the ignition switch to the ON position, the supplemental air bag warning light illuminates. The supplemental air bag warning light will turn off after about 7 seconds if the system is operational.

Status light : The front passenger air bag status light is located under the climate controls on the instrument panel. The light operates as follows: is ● Unoccupied passenger seat: The OFF and the front passenger air bag is OFF and will not inflate in a crash.

SSS0676

Front passenger air bag status light

Front passenger air bag and status light WARNING The front passenger air bag is designed to automatically turn OFF under some conditions. Read this section carefully to learn how it operates. Proper use of the seat, seat belt and child restraints is necessary for most effective protection. Failure to follow all instructions in this manual concerning the use of seats, seat belts and child restraints can increase the risk or severity of injury in an accident.

1-42 Safety — Seats, seat belts and supplemental restraint system

● Passenger seat occupied by a small adult, child or child restraint as outlined in this illuminates to indicate section: The that the front passenger air bag is OFF and will not inflate in a crash. ● Occupied passenger seat and the passenger meets the conditions outlined in this secis OFF to indicate that tion: The light the front passenger air bag is operational. Front passenger air bag : The front passenger air bag is designed to automatically turn OFF when the vehicle is operated under some conditions as described below as permitted by U.S. regulations. If the front passenger air bag is OFF, it will not inflate in a crash. The driver air bag and other air bags in your vehicle are not part of this system.

The purpose of the regulation is to help reduce the risk of injury or death from an inflating air bag to certain front passenger seat occupants, such as children, by requiring the air bag to be automatically turned OFF. The occupant classification sensor (pattern sensor) is in the front passenger seat cushion and is designed to detect an occupant and objects on the seat. For example, if a child is in the front passenger seat, the Advanced Air Bag System is designed to turn the passenger air bag OFF in accordance with the regulations. Also, if a child restraint of the type specified in the regulations is on the seat, the occupant classification sensor can detect it and cause the air bag to turn OFF. Front passenger seat adult occupants who are properly seated and using the seat belt as outlined in this manual should not cause the passenger air bag to be automatically turned OFF. For small adults it may be turned OFF, however, if the occupant does not sit in the seat properly (for example, by not sitting upright, by sitting on an edge of the seat, or by otherwise being out of position), this could cause the sensor to turn the air bag OFF. Always be sure to be seated and wearing the seat belt properly for the most effective protection by the seat belt and supplemental air bag.

INFINITI recommends that pre-teens and children be properly restrained in a rear seat. INFINITI also recommends that appropriate child restraints and booster seats be properly installed in a rear seat. If this is not possible, the occupant classification sensor is designed to operate as described above to turn the front passenger air bag OFF for specified child restraints. Failing to properly secure child restrains and to use the ALR mode (child restraint mode) may allow the restraint to tip or move in an accident or sudden stop. This can also result in the passenger air bag inflating in a crash instead of being OFF. (See “CHILD RESTRAINTS” earlier in this section for proper use and installation.) If the front passenger seat is not occupied, the passenger air bag is designed not to inflate in a crash. However, heavy objects placed on the seat could result in air bag inflation, because of the object being detected by the occupant classification sensor. Other conditions could also result in air bag inflation, such as if a child is standing on the seat, or if two children are on the seat, contrary to the instructions in this manual. Always be sure that you and all vehicle occupants are seated and restrained properly.

Using the passenger air bag status light, you can monitor when the front passenger air bag is automatically turned OFF with the seat occupied. The light will not illuminate when the front passenger seat is unoccupied. If an adult occupant is in the seat but the passenger air bag status light is illuminated (indicating that the air bag is OFF), it could be that the person is a small adult, or is not sitting on the seat properly. If a child restraint must be used in the front seat, the passenger air bag status light may or may not be illuminated, depending on the size of the child and the type of child restraint being used. If the passenger air bag status light is not illuminated (indicating that the air bag might inflate in a crash), it could be that the child restraint or seat belt is not being used properly. Make sure that the child restraint is installed properly, the seat belt is used properly and the occupant is positioned properly. If the passenger air bag status light is still not illuminated, reposition the occupant or child restraint in a rear seat.

Safety — Seats, seat belts and supplemental restraint system 1-43

If the passenger air bag status light will not illuminate even though you believe that the child restraint, the seat belts and the occupant are properly positioned, the system may be sensing an unoccupied seat (in which case the air bag is OFF). Your INFINITI retailer can check that the system is OFF by using a special tool. However, until you have confirmed with your retailer that your air bag is working properly, reposition the occupant or child restraint in a rear seat.

Other supplemental front-impact air bag precautions

The INFINITI Advanced Air Bag System and passenger air bag status light will take a few seconds to register a change in the passenger seat status. However, if the seat becomes unoccupied, the air bag status light will remain off.

● Do not place objects with sharp edges on the seat. Also, do not place heavy objects on the seat that will leave permanent impressions in the seat. Such objects can damage the seat or occupant classification sensor (pattern sensor). This can affect the operation of the air bag system and result in serious personal injury.

If a malfunction occurs in the front passenger air bag system, the supplemental air bag warn, located in the meter and ing light gauges area will blink. Have the system checked by an INFINITI retailer.

WARNING ● Do not place any objects on the steering wheel pad or on the instrument panel. Also, do not place any objects between any occupant and the steering wheel or instrument panel. Such objects may become dangerous projectiles and cause injury if the front air bag inflates.

● Do not use water or acidic cleaners (hot steam cleaners) on the seat. This can damage the seat or occupant classification sensor. This can also affect the operation of the air bag system and result in serious personal injury. ● Immediately after inflation, several front air bag system components will be hot. Do not touch them; you may severely burn yourself.

1-44 Safety — Seats, seat belts and supplemental restraint system

● No unauthorized changes should be made to any components or wiring of the air bag system. This is to prevent accidental inflation of the supplemental air bag or damage to the supplemental air bag system. ● Do not make unauthorized changes to your vehicle’s electrical system, suspension system or front end structure. This could affect proper operation of the front air bag system. ● Tampering with the air bag system may result in serious personal injury. Tampering includes changes to the steering wheel and the instrument panel assembly by placing material over the steering wheel pad and above the instrument panel or by installing additional trim material around the air bag system. ● Modifying or tampering with the front passenger seat may result in serious personal injury. For example, do not change the front seats by placing material on the seat cushion or by installing additional trim material, such as seat covers, on the seat that is not specifically designed to assure proper air bag operation. Additionally, do not stow any objects under the front passenger seat or the seat cushion and seatback. Such objects may interfere with the proper operation of the occupant classification sensor.

although they may inflate if the forces in another type of collision are similar to those of a higher severity side impact. They are designed to inflate on the side where the vehicle is impacted. They may not inflate in certain side collisions on the side where the vehicle is impacted.

● No unauthorized changes should be made to any components or wiring of the seat belt system. This may affect the front air bag system. Tampering with the seat belt system may result in serious personal injury. ● Work on and around the front air bag system should be done by an INFINITI retailer. Installation of electrical equipment should also be done by an INFINITI retailer. The Supplemental Restraint System (SRS) wiring harness* should not be modified or disconnected. Unauthorized electrical test equipment and probing devices should not be used on the air bag system. ● A cracked windshield should be replaced immediately by a qualified repair facility. A cracked windshield could affect the function of the supplemental air bag system. *

The SRS wiring harness connectors are yellow and orange for easy identification.

When selling your vehicle, we request that you inform the buyer about the front air bag system and guide the buyer to the appropriate sections in this Owner’s Manual.

Vehicle damage (or lack of it) is not always an indication of proper supplemental side air bag and curtain side-impact air bag operation.

SSS0982

FRONT SEAT-MOUNTED SIDE-IMPACT SUPPLEMENTAL AIR BAG AND DOOR-MOUNTED CURTAIN SIDEIMPACT SUPPLEMENTAL AIR BAG SYSTEMS The side air bags are located in the outside of the seatback of the front seats. The curtain air bags are located in the upper side of the door panel. These systems are designed to meet voluntary guidelines to help reduce the risk of injury to out-of-position occupants. However, all of the information, cautions and warnings in this manual still apply and must be followed. The side air bags and curtain air bags are designed to inflate in higher severity side collisions,

When side air bags and curtain air bags inflate, a fairly loud noise may be heard, followed by release of smoke. This smoke is not harmful and does not indicate a fire. Care should be taken not to inhale it, as it may cause irritation and choking. Those with a history of a breathing condition should get fresh air promptly. Side air bags, along with the use of seat belts, help to cushion the impact force on the chest and pelvis of the front occupants. Curtain air bags help to cushion the impact force to the head of occupants in the front seating positions. They can help save lives and reduce serious injuries. However, an inflating side air bags and curtain air bags may cause abrasions or other injuries. Side air bags and curtain air bags do not provide restraint to the lower body.

Safety — Seats, seat belts and supplemental restraint system 1-45

The seat belts should be correctly worn and the driver and passenger seated upright as far as practical away from the side air bag. The side air bags and curtain side air bags inflate quickly in order to help protect the occupants. Because of this, the force of the side air bags and curtain air bags inflating can increase the risk of injury if the occupant is too close to, or is against, these air bag modules during inflation. The side air bags and curtain air bags will deflate quickly after the collision is over. The side air bags and curtain air bags operate only when the ignition switch is in the ON position. After pushing the ignition switch to the ON position, the supplemental air bag warning light illuminates. The air bag warning light will turn off after about 7 seconds if the systems are operational.

WARNING

● Right after inflation, several side air bags and curtain air bag system components will be hot. Do not touch them; you may severely burn yourself. ● No unauthorized changes should be made to any components or wiring of side air bag and curtain air bags. This is to prevent accidental inflation of the side air bag and curtain air bag or damage to side air bag and curtain air bag systems. ● Do not make unauthorized changes to your vehicle’s electrical system, suspension system, door panel and door trim, and side panel. This could affect proper operation of the side air bag and curtain air bag systems. ● Tampering with the side air bag system may result in serious personal injury. For example, do not change the front seats by placing material near the seatback or by installing additional trim material, such as seat covers, around the side air bags.

● Do not place any objects near the seatback of the front seats. Also, do not place any objects (an umbrella, bag, etc.) between the front door finisher and the front seat. Such objects may become dangerous projectiles and cause injury if side air bag inflates.

1-46 Safety — Seats, seat belts and supplemental restraint system

● Work around and on the side air bag and curtain air bag systems should be done by an INFINITI retailer. Installation of electrical equipment should also be done by an INFINITI retailer. The Supplemental Restraint System (SRS) wiring harnesses* should not be modified or disconnected. Unauthorized electrical test equipment and probing devices should not be used on the side-impact air bag system. * The SRS wiring harness connectors are yellow and orange for easy identification. When selling your vehicle, we request that you inform the buyer about the side air bag and curtain air bag systems and guide the buyer to the appropriate sections in this Owner’s Manual.

SEAT BELTS WITH PRETENSIONERS (front seats) WARNING ● The pretensioners cannot be reused after activation. They must be replaced together with the retractor and buckle as a unit. ● If the vehicle becomes involved in a collision but a pretensioner is not activated, be sure to have the pretensioner system checked and, if necessary, replaced by an INFINITI retailer. ● No unauthorized changes should be made to any components or wiring of the pretensioners. This is to prevent damage to or accidental activation of the pretensioner system. Tampering with the pretensioner system may result in serious personal injury. ● Work around and on the pretensioners should be done by an INFINITI retailer. Installation of electrical equipment should also be done by an INFINITI retailer. Unauthorized electrical test equipment and probing devices should not be used on the pretensioner system.

● If you need to dispose of the pretensioner or scrap the vehicle, contact an INFINITI retailer. Correct pretensioner disposal procedures are set forth in the appropriate INFINITI Service Manual. Incorrect disposal procedures could cause personal injury. The pretensioner system may activate with the supplemental air bag system in certain types of collisions. Working with the seat belt retractors, it helps tighten the seat belt when the vehicle becomes involved in certain types of collisions, helping to restrain front seat occupants.

The supplemental air bag warning light is used to indicate malfunctions in the pretensioner system. (See “SUPPLEMENTAL AIR BAG WARNING LIGHT” later in this section for more details.) If the supplemental air bag warning light indicates there is a malfunction, have the system checked by an INFINITI retailer. When selling your vehicle, we request that you inform the buyer about the seat belt pretensioners and guide the buyer to the appropriate sections in this Owner’s Manual.

The pretensioner is encased with the seat belt retractor. These seat belts are used the same way as conventional seat belts. When a pretensioner seat belt activates, smoke is released and a loud noise may be heard. The smoke is not harmful, and it does not indicate a fire. Care should be taken not to inhale it as it may cause irritation and choking. Those with a history of a breathing condition should get fresh air promptly. After pretensioner activation, load limiters allow the seat belt to release webbing (if necessary) to reduce forces against the chest.

Safety — Seats, seat belts and supplemental restraint system 1-47

When the ignition switch is in the ON position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. If any of the following conditions occur, the front air bag, side air bag, curtain air bag and pretensioner systems need servicing: ● The supplemental air bag warning light remains on approximately 7 seconds after the ignition switch is pushed to the ON position. SSS1016

SPA1097

● The supplemental air bag warning light flashes intermittently.

SUPPLEMENTAL AIR BAG WARNING LABELS

SUPPLEMENTAL AIR BAG WARNING LIGHT

● The supplemental air bag warning light does not come on at all.

Warning labels about the supplemental frontimpact air bag are placed in the vehicle as shown in the illustration.

The supplemental air bag warning light, disin the instrument panel, moniplaying tors the circuits of the supplemental frontimpact air bag, front seat-mounted side-impact supplemental air bag, door-mounted curtain side-impact supplemental air bag, and seat belt pretensioner systems. The monitored circuits include the Air bag Control Unit (ACU), satellite sensors, crash zone sensor, occupant classification system, front air bag modules, side air bag modules, curtain air bag modules, pretensioner and all related wiring.

Under these conditions, the front air bag, side air bag, curtain air bag or pretensioner systems may not operate properly. They must be checked and repaired. Take your vehicle to the nearest INFINITI retailer.

1 SRS air bag 䊊

1 are located on the The warning labels 䊊 surface of the sun visors.

1-48 Safety — Seats, seat belts and supplemental restraint system

WARNING If the supplemental air bag warning light is on, it could mean that the front air bag, side air bag, curtain air bag and/or pretensioner systems will not operate in an accident. To help avoid injury to yourself or others, have your vehicle checked by a retailer as soon as possible.

REPAIR AND REPLACEMENT PROCEDURE The front air bags, side air bags, curtain air bags and pretensioners are designed to activate on a one-time-only basis. As a reminder, unless it is damaged, the supplemental air bag warning light will remain illuminated after inflation has occurred. Repair and replacement of these systems should be done only by an INFINITI retailer. When maintenance work is required on the vehicle, the front air bags, side air bags, curtain air bags, pretensioners and related parts should be pointed out to the person conducting the maintenance. The ignition switch should always be in the LOCK position when working under the hood or inside the vehicle.

WARNING ● Once a front air bag, side air bag, or curtain air bag has inflated, the air bag module will not function again and must be replaced. Additionally, the activated pretensioner must also be replaced. The air bag module and pretensioner system should be replaced by an INFINITI retailer. The air bag module and pretensioner system cannot be repaired. ● The front air bag, side air bag, curtain air bag and the pretensioner system should be inspected by an INFINITI retailer if there is any damage to the front end or side portion of the vehicle. ● If you need to dispose of the supplemental air bag or pretensioner systems or scrap the vehicle, contact an INFINITI retailer. Correct supplemental air bag and seat belt pretensioner system disposal procedures are set forth in the appropriate INFINITI Service Manual. Incorrect disposal procedures could cause personal injury.

SSS0983

POP-UP ROLL BAR SYSTEM The pop-up roll bars are designed to deploy during rollover collisions. The pop-up roll bars are located behind the rear seatback and deploy when the Air bag Control Unit (ACU) judges that the vehicle will overturn. The pop-up roll bars, with proper seat belt usage, help preserve occupant headroom in a rollover collision and can help reduce the risk of occupant injury.

Safety — Seats, seat belts and supplemental restraint system 1-49

WARNING Failure to follow the warnings and instructions in this section may result in serious injury or death. ● The pop-up roll bars deploy upward at a high speed when activated. Keep hands and other body parts away from the pop-up roll bars. ● Never place objects (such as umbrellas or accessories) near the pop-up roll bars, which deploy from the top of rear seatback. Such objects can become dangerous projectiles when pop-up roll bars deploy. ● Tampering with the pop-up roll bars may cause them to unintentionally deploy or operate abnormally. ● Never open the pop-up roll bar covers or modify or disassemble the pop-up roll bars. ● Do not sit, place a heavy object, or apply a strong load on the pop-up roll bar cover. Doing so could cause damage to the cover or cause the pop-up roll bar to not operate properly. ● Never allow anyone other than an INFINITI retailer to retract or repair the pop-up roll bars. Always contact an INFINITI retailer after pop-up roll bars deploy.

1-50 Safety — Seats, seat belts and supplemental restraint system

MEMO

Safety — Seats, seat belts and supplemental restraint system 1-51

2 Instruments and controls

Cockpit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Instrument panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Meters and gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Speedometer and odometer . . . . . . . . . . . . . . . . . . . . . 2-5 Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 Engine coolant temperature gauge . . . . . . . . . . . . . . . 2-6 Fuel gauge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 Warning/indicator lights and audible reminders. . . . . . 2-8 Checking bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8 Warning lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9 Indicator lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13 Audible reminders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-15 Dot matrix liquid crystal display . . . . . . . . . . . . . . . . . . . 2-16 Indicators for operation . . . . . . . . . . . . . . . . . . . . . . . . 2-18 Indicators for retractable hard top . . . . . . . . . . . . . . 2-21 Indicators for maintenance . . . . . . . . . . . . . . . . . . . . . 2-22 Trip computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-23 Security systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-26 Vehicle security system . . . . . . . . . . . . . . . . . . . . . . . . 2-26 INFINITI Vehicle Immobilizer System . . . . . . . . . . . . 2-27 Windshield wiper and washer switch. . . . . . . . . . . . . . . 2-28 Rain-sensing auto wiper system (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-30 Rear window and outside mirror defroster switch . . . 2-31

Headlight and turn signal switch . . . . . . . . . . . . . . . . . . 2-31 Xenon headlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-31 Headlight switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-32 Turn signal switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-35 Fog light switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-36 Hazard warning flasher switch. . . . . . . . . . . . . . . . . . . . . 2-36 Horn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-37 Heated seats (if so equipped) . . . . . . . . . . . . . . . . . . . . . 2-37 Climate controlled seats (if so equipped) . . . . . . . . . . . 2-38 Vehicle Dynamic Control (VDC) OFF switch . . . . . . . . . . 2-39 Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-40 Adjusting the time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-40 Power outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-41 Cigarette lighter and ashtrays (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-42 Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-42 Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-42 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-43 Cup holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-43 Glove box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-44 Console box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-45 Storage box (if so equipped) . . . . . . . . . . . . . . . . . . . 2-46 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-46 Power windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-46

Interior lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-49 Map lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-49 Interior light control switch . . . . . . . . . . . . . . . . . . . . 2-50 Vanity mirror lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-51 Trunk light. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-51 HomeLink姞 Universal Transceiver (if so equipped) . . . .2-51 Programming HomeLink姞 . . . . . . . . . . . . . . . . . . . . . . 2-52 Programming HomeLink姞 for Canadian customers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-54

Operating the HomeLink姞 Universal Transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Programming trouble-diagnosis. . . . . . . . . . . . . . . . . Clearing the programmed information . . . . . . . . . . . Reprogramming a single HomeLink姞 button . . . . . If your vehicle is stolen . . . . . . . . . . . . . . . . . . . . . . . .

2-54 2-54 2-54 2-54 2-55

COCKPIT

SSI0819

1. Vehicle Dynamic Control (VDC) OFF switch (P. 5-52) 2. Trunk lid release switch (P. 3-28) 3. Sonar system OFF switch (if so equipped) (P. 5-47)

2-2 Instruments and controls

4. Instrument brightness control switch (P. 2-35) 5. TRIP/RESET switch for twin trip odometer (P. 2-5) 6. Headlight, fog light and turn signal switch (P. 2-31)

7. Paddle shifter (if so equipped) (P. 5-14) 8. Steering-wheel-mounted controls (Left side) — ENTER or tuning switch (P. 4-82) — BACK switch (P. 4-82) — TALK switch (P. 4-109)/Phone switch (P. 4-85) — Volume control switches (P. 4-82) — Source select switch (P. 4-82) 9. Trip computer switch (P. 2-23) 10. Windshield wiper and washer switch (P. 2-28) 11. Steering-wheel-mounted controls (Right side) — Cruise control switches (P. 5-19) — Intelligent Cruise Control (ICC) switches (if so equipped) (P. 5-21) 12. Hood release handle (P. 3-17) 13. Intelligent Key port (P. 5-10) 14. Electric tilting/telescopic steering wheel lever (if so equipped) (P. 3-33) 15. Manual tilting/telescopic steering wheel lever (if so equipped) (P. 3-33) 16. Steering wheel — Horn (P. 2-37) — Driver supplemental air bag (P. 1-35)

INSTRUMENT PANEL

SSI0671

1. 2. 3. 4. 5.

Side ventilator (P. 4-28) Meters and gauges (P. 2-4) Center ventilator (P. 4-28) Audio system (P. 4-37) Clock (P. 2-40)

6. Center multi-function control panel — Navigation system* (if so equipped) — Vehicle information and setting buttons (P. 4-7) — Bluetooth姞 Hands-Free Phone System (P. 4-85) — Audio system (P. 4-37)

7. Center display (P. 4-2)/Navigation system* (if so equipped) 8. Hazard warning flasher switch (P. 2-36) 9. Front passenger supplemental air bag (P. 1-35) 10. Fuse box cover (P. 8-20) 11. Parking brake (for Automatic Transmission models) — Parking (P. 5-18) 12. Push-button ignition switch (P. 5-7) 13. Automatic climate control system (P. 4-29) 14. Cigarette lighter and ashtray (if so equipped) (P. 2-42) or Storage box (if so equipped) (P. 2-46) — Power outlet (if so equipped) (P. 2-41) 15. Parking brake (for Manual Transmission models) — Parking (P. 5-18) 16. Heated seat switch (if so equipped) (P. 2-37) or Climate controlled seat switch (if so equipped) (P. 2-38) 17. Retractable hard top operating switch (P. 3-18) 18. Rear window and outside mirror (if so equipped) defogger switch (P. 2-31) 19. Glove box lid release handle (P. 2-44)

Instruments and controls 2-3

METERS AND GAUGES 20. Trunk release power cancel switch (P. 3-29) *: Refer to the separate Navigation System Owner’s Manual.

SIC4288

1. 2. 3. 4.

2-4 Instruments and controls

Tachometer (P. 2-6) Warning/Indicator lights (P. 2-8) Speedometer (P. 2-5) Engine coolant temperature gauge (P. 2-6)

5. Dot matrix liquid crystal display/ Odometer/twin trip odometer (P. 2-16) 6. Fuel gauge (P. 2-7)

The needle indicators in the speedometer, tachometer, engine coolant temperature gauge and fuel gauge may move slightly after the ignition switch is pushed to the LOCK position. This is not a malfunction.

SIC4289

Speedometer

SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates vehicle speed in miles per hour (MPH) and kilometers per hour (km/h).

SIC3259

Odometer/twin trip odometer

Odometer/twin trip odometer 1 and twin trip odometer 䊊 2 are The odometer 䊊 displayed on the dot matrix crystal display when the ignition switch is in the ON position.

The odometer records the total distance the vehicle has been driven. The twin trip odometer records the distance of individual trips.

Instruments and controls 2-5

Changing the display : 3 at the Pushing the TRIP A/B RESET switch 䊊 bottom left of the combination meter panel changes the display as follows:

TRIP A → TRIP B → TRIP A Resetting the trip odometer : 3 for more Pushing the TRIP A/B RESET switch 䊊 than 1 second resets the trip odometer to zero.

Average fuel economy and distance to empty information is also available. (See “DOT MATRIX LIQUID CRYSTAL DISPLAY” later in this section and “HOW TO USE STATUS BUTTON” in the “4. Monitor, climate, audio, phone and voice recognition systems” section.)

SIC4290

TACHOMETER The tachometer indicates engine speed in revolutions per minute (RPM). Do not rev the engine 1 . into the red zone 䊊

CAUTION When engine speed approaches the red zone, shift to a higher gear or reduce engine speed. Operating the engine in the red zone may cause serious engine damage.

2-6 Instruments and controls

SIC4291

ENGINE COOLANT TEMPERATURE GAUGE The gauge indicates the engine coolant temperature. The engine coolant temperature is within the normal range when the gauge needle points 1 shown in the illustration. within the zone 䊊 The engine coolant temperature varies with the outside air temperature and driving conditions.

There will be a small reserve of fuel in the tank when the fuel gauge needle reaches “E”.

CAUTION If the gauge indicates engine coolant temperature near the hot (H) end of the normal range, reduce vehicle speed to decrease temperature. If gauge is over the normal range, stop the vehicle as soon as safely possible. If the engine is overheated, continued operation of the vehicle may seriously damage the engine. See “IF YOUR VEHICLE OVERHEATS” in the “6. In case of emergency” section for immediate action required.

indicates that the fuel-filler door is The located on the front passenger’s side of the vehicle.

CAUTION

SIC4292

FUEL GAUGE The gauge indicates the approximate fuel level in the tank.

● If the vehicle runs out of fuel, the malfunction indicator light (MIL) may come on. Refuel as soon as possible. After a few light should turn off. driving trips, the If the light remains on after a few driving trips, have the vehicle inspected by an INFINITI retailer. ● For additional information, see “Malfunction Indicator Light (MIL)” later in this section.

The gauge may move slightly during braking, turning, acceleration, or going up or down hills. The gauge needle returns to E (Empty) after the ignition switch is pushed to the OFF position. Refill the fuel tank before the gauge registers “E” (Empty). appears on the dot The low fuel warning matrix liquid crystal display when the fuel tank is getting low. Refuel as soon as it is convenient, preferably before the gauge reaches “E”.

Instruments and controls 2-7

WARNING/INDICATOR LIGHTS AND AUDIBLE REMINDERS Anti-lock Braking System (ABS) warning light

Intelligent Key warning light

Front fog light indicator light

Low tire pressure warning light

Front passenger air bag status light

Automatic transmission check warning light*

Master warning light

High beam indicator light

Brake warning light

Preview Function warning light (orange)*

Malfunction Indicator Light (MIL)

Seat belt warning light

Security indicator light

Charge warning light

Supplemental air bag warning light

Low beam indicator light

Engine oil pressure warning light

Vehicle Dynamic Control (VDC) warning light

Turn signal/hazard indicator lights

Intelligent Cruise Control (ICC) system warning light (orange)*

Automatic transmission position indicator light*

Vehicle Dynamic Control (VDC) off indicator light *: if so equipped

CHECKING BULBS With all doors closed, apply the parking brake and push the ignition switch to the ON position without starting the engine. The following lights will come on (if so equipped): ,

or

,

,

2-8 Instruments and controls

,

,

The following lights come on briefly and then go off (if so equipped): ,

or

,

,

,

,

,

If any light does not come on, it may indicate a burned-out bulb or an open circuit in the electrical system. Have the system checked by an INFINITI retailer.

Some indicators and warnings are also displayed on the dot matrix crystal display between the speedometer and tachometer. (See “DOT MATRIX LIQUID CRYSTAL DISPLAY” later in this section.)

WARNING LIGHTS or

or Anti-lock Braking System (ABS) warning light

When the ignition switch is in the ON position, the Anti-lock Braking System (ABS) warning light illuminates and then turns off. This indicates the ABS is operational. If the ABS warning light illuminates while the engine is running, or while driving, it may indicate the ABS is not functioning properly. Have the system checked by an INFINITI retailer. If an ABS malfunction occurs, the anti-lock function is turned off. The brake system then operates normally, but without anti-lock assistance. (See “BRAKE SYSTEM” in the “5. Starting and driving” section.)

Automatic transmission check warning light (if so equipped) When the ignition switch is pushed to the ON position, the light comes on for 2 seconds. If the light comes on at any other time, it may indicate the transmission is not functioning properly. Have your INFINITI retailer check and repair the transmission.

Brake warning light

This light functions for both the parking brake and the foot brake systems. Parking brake indicator : When the ignition switch is in the ON position, the light comes on when the parking brake is applied. Low brake fluid warning light : When the ignition switch is in the ON position, the light warns of a low brake fluid level. If the light comes on while the engine is running with the parking brake not applied, stop the vehicle and perform the following: 1. Check the brake fluid level. If brake fluid is necessary, add fluid and have the system checked by your INFINITI retailer. (See “BRAKE AND CLUTCH FLUID” in the “8. Maintenance and do-it-yourself” section.) 2. If the brake fluid level is correct, have the warning system checked by an INFINITI retailer.

Anti-lock Braking System (ABS) warning indicator : When the parking brake is released and the brake fluid level is sufficient, if both the brake warning light and the Anti-lock Braking System (ABS) warning light illuminate, it may indicate the ABS is not functioning properly. Have the brake system checked, and if necessary repaired, by an INFINITI retailer promptly. (See “Anti-lock Braking System (ABS) warning light” earlier in this section.)

WARNING ● Your brake system may not be working properly if the warning light is on. Driving could be dangerous. If you judge it to be safe, drive carefully to the nearest service station for repairs. Otherwise, have your vehicle towed because driving it could be dangerous. ● Pressing the brake pedal with the engine stopped and/or low brake fluid level may increase your stopping distance and braking will require greater pedal effort as well as pedal travel. ● If the brake fluid level is below the minimum or MIN mark on the brake fluid reservoir, do not drive until the brake system has been checked at an INFINITI retailer.

Instruments and controls 2-9

Charge warning light If the light comes on while the engine is running, it may indicate the charging system is not functioning properly. Turn the engine off and check the alternator belt. If the belt is loose, broken, missing or if the light remains on, see an INFINITI retailer immediately.

CAUTION Do not continue driving if the alternator belt is loose, broken or missing.

Engine oil pressure warning light This light warns of low engine oil pressure. If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately and call an INFINITI retailer or other authorized repair shop. The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level. (See “ENGINE OIL” in the “8. Maintenance and do-it-yourself” section.)

2-10 Instruments and controls

CAUTION Running the engine with the engine oil pressure warning light on could cause serious damage to the engine almost immediately. Such damage is not covered by warranty. Turn off the engine as soon as it is safe to do so.

Intelligent Cruise Control (ICC) system warning light (orange; if so equipped) This light comes on if there is a malfunction in the Intelligent Cruise Control (ICC) system. If the warning light comes on, park the vehicle in a safe place. Turn the engine off, restart the engine, resume driving and set the ICC system again. If it is not possible to set the system or the indicator stays on, it may indicate that the system is malfunctioning. Although the vehicle is still driveable under normal conditions, have the vehicle checked at an INFINITI retailer.

Intelligent Key warning light After the ignition switch is pushed to the ON position, this light comes on for about 2 seconds and then turns off. This light warns of a malfunction with the electrical steering lock system (if so equipped) or the Intelligent Key system. If the light comes on while the engine is stopped, it may be impossible to free the steering lock (if so equipped) or to start the engine. If the light comes on while the engine is running, you can drive the vehicle. However in these cases, contact an INFINITI retailer for repair as soon as possible.

Low tire pressure warning light Your vehicle is equipped with a Tire Pressure Monitoring System (TPMS) that monitors the tire pressure of all tires except the spare. The low tire pressure warning light warns of low tire pressure or indicates that the TPMS is not functioning properly. After the ignition switch is pushed ON, this light illuminates for about 1 second and turns off.

Low tire pressure warning :

TPMS malfunction :

If the vehicle is being driven with low tire pressure, the warning light will illuminate. A CHECK TIRE PRESSURE warning also appears in the dot matrix liquid crystal display.

If the TPMS is not functioning properly, the low tire pressure warning light will flash for approximately 1 minute when the ignition switch is pushed ON. The light will remain on after the 1 minute. Have the system checked by an INFINITI retailer. The CHECK TIRE PRESSURE warning does not appear if the low tire pressure warning light illuminates to indicate a TPMS malfunction.

When the low tire pressure warning light illuminates, you should stop and adjust the tire pressure to the recommended COLD tire pressure shown on the Tire and Loading Information label. The low tire pressure warning light does not automatically turn off when the tire pressure is adjusted. After the tire is inflated to the recommended pressure, the vehicle must be driven at speeds above 16 MPH (25 km/h) to activate the TPMS and turn off the low tire pressure warning light. Use a tire pressure gauge to check the tire pressure. The CHECK TIRE PRESSURE Warning is active as long as the low tire pressure warning light remains illuminated. For additional information, see “DOT MATRIX LIQUID CRYSTAL DISPLAY” later in this section, “TIRE PRESSURE MONITORING SYSTEM (TPMS)” in the “5. Starting and driving” section and “TIRE PRESSURE MONITORING SYSTEM (TPMS)” in the “6. In case of emergency” section.

For additional information, see “TIRE PRESSURE MONITORING SYSTEM (TPMS)” in the “5. Starting and driving” section.

WARNING ● If the light does not illuminate with the ignition switch pushed ON, have the vehicle checked by an INFINITI retailer as soon as possible.

● If the light illuminates while driving, avoid sudden steering maneuvers or abrupt braking, reduce vehicle speed, pull off the road to a safe location and stop the vehicle as soon as possible. Driving with under-inflated tires may permanently damage the tires and increase the likelihood of tire failure. Serious vehicle damage could occur and may lead to an accident and could result in serious personal injury. Check the tire pressure for all four tires. Adjust the tire pressure to the recommended COLD tire pressure shown on the Tire and Loading Information label to turn the low tire pressure warning light OFF. If the light still illuminates while driving after adjusting the tire pressure, a tire may be flat. If you have a flat tire, replace it with a spare tire as soon as possible. ● When a spare tire is mounted or a wheel is replaced, the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after the 1 minute. Contact your INFINITI retailer as soon as possible for tire replacement and/or system resetting. ● Replacing tires with those not originally specified by INFINITI could affect the proper operation of the TPMS.

Instruments and controls 2-11

CAUTION ● The TPMS is not a substitute for the regular tire pressure check. Be sure to check the tire pressure regularly. ● If the vehicle is being driven at speeds of less than 16 MPH (25 km/h), the TPMS may not operate correctly. ● Be sure to install the specified size of tires to the four wheels correctly.

Master warning light When the ignition switch is in the ON position, the master warning light illuminates if any of the following are displayed on the dot matrix liquid crystal display: ● No key warning ● Low fuel warning ● Low washer fluid warning ● Parking brake release warning ● Door/trunk open warning ● Loose fuel cap warning ● Check tire pressure warning See “DOT MATRIX LIQUID CRYSTAL DISPLAY” later in this section.

2-12 Instruments and controls

Preview Function warning light (orange; if so equipped) The light comes on if there is a malfunction in the Brake Assist (with Preview Function) system. If the warning light comes on, park the vehicle in a safe place. Turn the engine off, restart the engine, resume driving and set the ICC system again. If it is not possible to set the system or the indicator stays on, it may indicate that the system is malfunctioning. Although the vehicle is still driveable under normal conditions, have the vehicle checked at an INFINITI retailer.

Seat belt warning light

switch is in the ON position, the system does not activate the warning light for the front passenger. See “SEAT BELTS” in the “1. Safety — Seats, seat belts and supplemental restraint system” section for precautions on seat belt usage.

Supplemental air bag warning light After pushing the ignition switch to the ON position, the supplemental air bag warning light will illuminate. The supplemental air bag warning light will turn off after about 7 seconds if the supplemental front air bag and supplemental side air bag, curtain side-impact air bag systems and/or pretensioner seat belt are operational.

The light and chime remind you to fasten seat belts. The light illuminates whenever the ignition switch is pushed to the ON position, and will remain illuminated until the driver’s seat belt is fastened. At the same time, the chime will sound for about 6 seconds unless the driver’s seat belt is securely fastened.

If any of the following conditions occur, the front air bag, side air bag, curtain air bag and pretensioner systems needs servicing and your vehicle must be taken to your nearest INFINITI retailer.

The seat belt warning light for the front passenger will illuminate if the seat belt is not fastened when the front passenger’s seat is occupied. For approximately 5 seconds after the ignition

● The supplemental air bag warning light flashes intermittently.

● The supplemental air bag warning light remains on after approximately 7 seconds.

● The supplemental air bag warning light does not come on at all.

Unless checked and repaired, the supplemental restraint systems and/or the pretensioners may not function properly. For additional information, see “SUPPLEMENTAL RESTRAINT SYSTEM” in the “1. Safety — Seats, seat belts and supplemental restraint system” section.

WARNING If the supplemental air bag warning light is on, it could mean that the front air bag, side air bag, curtain air bag systems and/or pretensioner systems will not operate in an accident. To help avoid injury to yourself or others, have your vehicle checked by a retailer as soon as possible.

Vehicle Dynamic Control (VDC) warning light The light will blink when the VDC system or the traction control system is operating, thus alerting the driver that the vehicle is nearing its traction limits. The road surface may be slippery. When the vehicle dynamic control warning light illuminates when the vehicle dynamic control system is turned on, this light alerts the driver to the fact that the vehicle dynamic control

system’s fail-safe mode is operating, for example the vehicle dynamic control system may not be functioning properly. Have the system checked by an INFINITI retailer. If a malfunction occurs in the system, the vehicle dynamic control system function will be canceled but the vehicle is still driveable. For additional information, see “VEHICLE DYNAMIC CONTROL (VDC) SYSTEM” in the “5. Starting and driving” section of this manual.

INDICATOR LIGHTS Automatic transmission position indicator light (if so equipped) When the ignition switch is pushed to the ON position, the indicator shows the automatic selector shift position. In the manual shift mode, when the transmission does not shift to the selected gear due to the transmission protection mode, the AT position indicator light will blink and a chime will sound.

Front fog light indicator light The front fog light indicator light illuminates when the front fog lights are on. (See “FOG LIGHT SWITCH” later in this section.)

Front passenger air bag status light The front passenger air bag status light ( ) located under the climate controls will be lit and the passenger front air bag will be OFF depending on how the front passenger seat is being used. For front passenger air bag status light operation, see “INFINITI ADVANCED AIR BAG SYSTEM (front seats)” in the “1. Safety — Seats, seat belts and supplemental restraint system” section of this manual.

High beam indicator light This light comes on when the headlight high beam is on and goes out when the low beam is selected.

(See “AUTOMATIC TRANSMISSION” in the “5. Starting and driving” section.)

Instruments and controls 2-13

Malfunction Indicator Light (MIL) If the malfunction indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. The malfunction indicator light may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. Check to make sure the fuel-filler cap is installed and closed tightly, and that the vehicle has at least 3 US gallons (14 liters) of fuel in the fuel tank. light should After a few driving trips, the turn off if no other potential emission control system malfunction exists. If this indicator light remains on for 20 seconds and then blinks for 10 seconds when the engine is not running, it indicates that the vehicle is not ready for an emission control system inspection/maintenance test. (See “READINESS FOR INSPECTION/MAINTENANCE (I/M) TEST” in the “9. Technical and consumer information” section.)

Operation : The malfunction indicator light will come on in one of two ways: ● Malfunction indicator light on steady — An emission control system malfunction has been detected. Check the fuel-filler cap if the LOOSE FUEL CAP warning appears in the dot matrix liquid crystal display. If the fuel-filler cap is loose or missing, tighten or install the cap and continue to drive the vehicle. The light should turn off after a few driving trips. If the light does not turn off after a few driving trips, have the vehicle inspected by an INFINITI retailer. You do not need to have your vehicle towed to the retailer. ● Malfunction indicator light blinking — An engine misfire has been detected which may damage the emission control system. To reduce or avoid emission control system damage: a) Do not drive at speeds above 45 MPH (72 km/h). b) Avoid hard acceleration or deceleration. c) Avoid steep uphill grades.

2-14 Instruments and controls

d) If possible, reduce the amount of cargo being hauled or towed. The malfunction indicator light may stop blinking and remain on. Have the vehicle inspected by an INFINITI retailer. You do not need to have your vehicle towed to the retailer.

CAUTION Continued vehicle operation without having the emission control system checked and repaired as necessary could lead to poor driveability, reduced fuel economy, and possible damage to the emission control system.

Security indicator light The light blinks when the ignition switch is in the ACC, OFF or LOCK position. This function indicates the security system equipped on the vehicle is operational. If the security system is malfunctioning, this light will remain on while the ignition switch is in the ON position. For additional information, see “SECURITY SYSTEMS” later in this section.

Low beam indicator light The light comes on when the front park, side marker, tail and license plate lights are on.

Turn signal/hazard indicator lights The light flashes when the turn signal switch lever or hazard switch is turned on.

Vehicle Dynamic Control (VDC) off indicator light The light comes on when the vehicle dynamic control off switch is pushed to OFF. This indicates that the vehicle dynamic control system and traction control system are not operating.

AUDIBLE REMINDERS Key reminder chime A chime will sound if the driver side door is opened while the ignition switch is pushed to the ACC position or pushed to the OFF or LOCK position with the Intelligent Key left in the Intelligent Key port. Make sure the ignition switch is pushed to the OFF position, and take the Intelligent Key with you when leaving the vehicle.

Light reminder chime

Seat belt warning chime

A chime will sound when the driver side door is or opened with the light switch in the position and the ignition switch in the ACC, OFF or LOCK position.

The seat belt warning chime will sound for about 6 seconds unless the driver’s seat belt is securely fastened.

Turn the light switch off when you leave the vehicle.

Parking brake reminder chime The parking brake reminder chime will sound if the vehicle is driven at more than 4 MPH (7 km/h) with the parking brake applied. Stop the vehicle and release the parking brake.

Brake pad wear warning The disc brake pads have audible wear warnings. When a brake pad requires replacement, it will make a high pitched scraping sound when the vehicle is in motion. This scraping sound will first occur only when the brake pedal is depressed. After the wear of the brake pad is increased, the sound will be heard all the time even if the brake pedal is not depressed. Have the brakes checked as soon as possible if the warning sound is heard.

Instruments and controls 2-15

DOT MATRIX LIQUID CRYSTAL DISPLAY ● Intelligent Cruise Control (ICC) system – “INTELLIGENT CRUISE CONTROL (ICC) SYSTEM” in the “5. Starting and driving” section. ● Intelligent Key system – “INTELLIGENT KEY SYSTEM” in the “3. Pre-driving checks and adjustments” section. – “PUSH-BUTTON IGNITION SWITCH” in the “5. Starting and driving” section. SIC4293 1 is The dot matrix liquid crystal display 䊊 located between the tachometer and the speedometer, and it displays the automatic transmission position indicator (if so equipped), the Intelligent Cruise Control (ICC) system (if so equipped) information, the Intelligent Key operation information, retractable hard top indicators and other warnings and information.

● Automatic Transmission (AT) – “WARNING/INDICATOR LIGHTS AND AUDIBLE REMINDERS” earlier in this section. – “DRIVING THE VEHICLE” in the “5. Starting and driving” section.

2-16 Instruments and controls

● Retractable hard top – “RETRACTABLE HARD TOP” in the “3. Predriving checks and adjustments” section.

SIC4625

Instruments and controls 2-17

INDICATORS FOR OPERATION 1. Engine start operation indicator (Automatic Transmission models)

4. Intelligent Key removal indicator

Unregistered Intelligent Key :

This indicator appears when the selector lever is in the P (Park) position.

This indicator appears when the driver’s door is opened with the ignition switch in the OFF or LOCK position and the Intelligent Key placed in the Intelligent Key port. A key reminder chime also sounds.

This indicator means that the engine will start by pushing the ignition switch with the brake pedal depressed.

If this indicator appears, remove the Intelligent Key from the Intelligent Key port and take it with you when leaving the vehicle.

The warning appears when the ignition switch is pushed from the LOCK position and the Intelligent Key cannot be recognized by the system. You cannot start the engine with an unregistered key. Use the registered Intelligent Key.

2. Steering lock release malfunction indicator (if so equipped)

5. NO KEY warning

This indicator appears when the steering wheel cannot be released from the LOCK position. If this indicator appears, push the push-button ignition switch while lightly turning the steering wheel right and left.

3. Intelligent Key insertion indicator This indicator appears when the Intelligent Key needs to be inserted into the Intelligent Key port. (For example, the Intelligent Key battery is discharged.) If this indicator appears, insert the Intelligent Key into the Intelligent Key port in the correct direction. (See “PUSH-BUTTON IGNITION SWITCH” in the “5. Starting and driving” section.)

2-18 Instruments and controls

This warning appears in either of the following conditions. No key inside the vehicle : The warning appears when the door is closed with the Intelligent Key left outside the vehicle and the ignition switch in the ACC or ON position. Make sure that the Intelligent Key is inside the vehicle.

See “INTELLIGENT KEY SYSTEM” in the “3. Predriving checks and adjustments” section for more details.

6. SHIFT “P” warning (Automatic Transmission models) This warning appears when the ignition switch is pushed to stop the engine with the selector lever in any position except the P (Park) position. If this warning appears, move the selector lever to the P (Park) position or push the ignition switch to the ON position. An inside warning chime will also sound. (See “INTELLIGENT KEY SYSTEM” in the “3. Predriving checks and adjustments” section.)

7. “PUSH” warning (Automatic Transmission models)

9. Engine start operation indicator (Manual Transmission models)

13. Door/trunk open warning (ignition switch is in the ON position)

This warning appears when the selector lever is moved to the P (Park) position with the ignition switch in the ACC position after the SHIFT “P” warning appears.

This indicator means that the engine will start by pushing the ignition switch with the clutch pedal depressed.

This warning appears if any of the doors and/or the trunk lid are open or not closed securely. The vehicle icon indicates which door or the trunk lid is open on the display.

To push the ignition switch to the OFF position, perform the following procedure: SHIFT “P” warning → (Move the selector lever to “P”) → PUSH warning → (Push the ignition switch → ignition switch position is turned to ON) → PUSH warning → (Push the ignition switch → ignition switch position is turned to OFF)

8. Intelligent Key battery discharge indicator This indicator appears when the Intelligent Key battery is running out of power. If this indicator appears, replace the battery with a new one. (See “INTELLIGENT KEY BATTERY REPLACEMENT” in the “8. Maintenance and do-it-yourself” section.)

10. Parking brake release warning This warning appears when the vehicle speed is above 4 MPH (7 km/h) and the parking brake is applied.

11. Low fuel warning This warning appears when the fuel level in the tank is getting low. Refuel as soon as it is convenient, preferably before the fuel gauge reaches the empty (E) position. There is a small reserve of fuel remaining in the tank when the fuel gauge reaches the empty (E) position.

12. Low washer fluid warning This warning appears when the washer tank fluid is at a low level. Add washer fluid as necessary. (See “WINDOW WASHER FLUID” in the “8. Maintenance and do-it-yourself” section.)

14. Loose fuel cap warning This warning appears when the fuel-filler cap is not tightened correctly after the vehicle has been refueled. (See “FUEL-FILLER CAP” in the “3. Pre-driving checks and adjustments” section.)

15. Check tire pressure warning This warning appears when the low tire pressure warning light in the meter illuminates and low tire pressure is detected. If this warning appears, stop the vehicle and adjust the tire pressure to the recommended COLD tire pressure shown on the Tire and Loading Information label. (See “Low tire pressure warning light” earlier in this section and “TIRE PRESSURE MONITORING SYSTEM (TPMS)” in the “5. Starting and driving” section.)

Instruments and controls 2-19

16. “Time to rest” indicator This indicator appears when the set “time to rest” indicator activates. You can set the time for up to 6 hours. (See “TRIP COMPUTER” later in this section.)

17. Low outside temperature warning This warning appears if the outside temperature is below 37°F (3°C). The warning can be set not to be displayed. (See “TRIP COMPUTER” later in this section.)

18. Cruise indicator Cruise main switch indicator : The indicator is displayed when the cruise control main switch is pushed. When the main switch is pushed again, the indicator disappears. When the cruise control main switch indicator is displayed, the cruise control system is operational. Cruise set switch indicator : The indicator is displayed while the vehicle speed is controlled by the cruise control system. If the indicator blinks while the engine is running, it may indicate that the cruise control system is not functioning properly. Have the system checked by an INFINITI retailer.

2-20 Instruments and controls

See “CRUISE CONTROL” in the “5. Starting and driving” section for details.

19. Intelligent Cruise Control (ICC) system MAIN switch indicator (if so equipped) The indicator is displayed when the Intelligent Cruise Control (ICC) system main switch is pushed. When the main switch is pushed again, the indicator disappears. While the main switch indicator is displayed, the ICC system is operational.

INDICATORS FOR RETRACTABLE HARD TOP This indicates the operating state of the retractable hard top. Displays a message and displays the status of the hard top. (See “RETRACTABLE HARD TOP” in the “3. Pre-driving checks and adjustments” section.)

1. Roof in operation indicator This indicator is displayed while the retractable hard top is being operated.

2. Roof open indicator This indicator is displayed when the retractable hard top is open completely.

3. Roof close indicator This indicator is displayed when the retractable hard top is closed completely.

4. Check separator indicator This indicator is displayed when the separator is not set in the holder normally.

5. Check trunk indicator This indicator is displayed when the trunk is not closed completely. NOTE: A message is not displayed while the Intelligent Cruise Control (ICC) system (if so equipped) is being operated. SIC4168

Instruments and controls 2-21

INDICATORS FOR MAINTENANCE 1. Engine oil replacement indicator This indicator appears when the set time comes for changing the engine oil. You can set or reset the distance for changing the engine oil. (See “TRIP COMPUTER” later in this section.)

2. Oil filter replacement indicator This indicator appears when the set time comes for replacing the oil filter. You can set or reset the distance for replacing the oil filter. (See “TRIP COMPUTER” later in this section.)

3. Tire replacement indicator This indicator appears when the set time comes for replacing tires. You can set or reset the distance for replacing tires. (See “TRIP COMPUTER” later in this section.)

4. “OTHER” indicator This indicator appears when the set time comes for replacing items other than the engine oil, oil filter and tires. You can set or reset the distance for replacing the items. (See “TRIP COMPUTER” later in this section.)

SIC3281

2-22 Instruments and controls

More maintenance reminders are also available on the center display. (See “HOW TO USE INFO BUTTON” in the “4. Monitor, climate, audio, phone and voice recognition systems” section.)

SIC3264

TRIP COMPUTER Switches for the trip computer are located on the right side of the combination meter panel. To operate the trip computer, push the side or front of the switches as shown above. A 䊊

switch

B 䊊

switch

When the ignition switch is pushed to the ON position, modes of the trip computer can be selected by pushing the

A . switch 䊊

SIC3282

Instruments and controls 2-23

A is pushed, the Each time the switch 䊊 display will change as follows:

than 1 second. (The average fuel consumption is also reset at the same time.)

Current fuel consumption → Average fuel consumption and speed → Elapsed time and trip odometer → Distance to empty (dte) → Outside air temperature (ICY) → Setting → Warning check

The display is updated every 30 seconds. The first 30 seconds after a reset, the display shows “——”.

1. Current fuel consumption The current fuel consumption mode shows the current fuel consumption.

2. Average fuel consumption (MPG or l (liter)/100 km) and speed (MPH or km/h) Fuel consumption : The average fuel consumption mode shows the average fuel consumption since the last reset. switch Resetting is done by pushing the B for longer than 1 second. (The average speed 䊊 is also reset at the same time.) The display is updated every 30 seconds. At about the first 1/3 mile (500 m) after a reset, the display shows “——”. Speed : The average speed mode shows the average vehicle speed since the last reset. Resetting is B for longer switch 䊊 done by pushing the

2-24 Instruments and controls

3. Elapsed time and trip odometer (mls or km) Elapsed time : The elapsed time mode shows the time since the last reset. The displayed time can be reset B for longer than switch 䊊 by pushing the 1 second. (The trip odometer is also reset at the same time.) Trip odometer : The trip odometer mode shows the total distance the vehicle has been driven since the last reset. Resetting is done by pushing the B for longer than 1 second. (The switch 䊊 elapsed time is also reset at the same time.)

4. Distance to empty (dte — mls or km) The distance to empty (dte) mode provides you with an estimation of the distance that can be driven before refueling. The dte is constantly being calculated, based on the amount of fuel in the fuel tank and the actual fuel consumption.

The display is updated every 30 seconds. The dte mode includes a low range warning feature. If the fuel level is low, the warning is displayed on the screen. When the fuel level drops even lower, the dte display will change to “——”. ● If the amount of fuel added is small, the display just before the ignition switch is pushed to the OFF position may continue to be displayed. ● When driving uphill or rounding curves, the fuel in the tank shifts, which may momentarily change the display.

5. Outside air temperature (ICY — °F or °C) The outside air temperature is displayed in °F or °C in the range of ⫺22 to 131°F (⫺30 to 55°C). The outside air temperature mode includes a low temperature warning feature. If the outside air temperature is below 37°F (3°C), the warning is displayed on the screen. The outside temperature sensor is located in front of the radiator. The sensor may be affected by road or engine heat, wind directions and other driving conditions. The display may differ from the actual outside temperature or the temperature displayed on various signs or billboards.

● ICY

6. Setting Setting cannot be made while driving. A message “Setting can only be operated when stopped” is also displayed on the dot matrix crystal display. The

A and switch 䊊

B are switch 䊊

used in the setting mode to select and decide a menu. SKIP : Push the

A to move to the switch 䊊

warning check mode. Push the

switch

B 䊊

to select other

menus. ALERT : There are 3 submenus under the alert menu. ● BACK Select this submenu to return to the top page of the setting mode. ● TIME TO REST Select this submenu to specify when the “time to rest” indicator activates.

Select this submenu to display the low outside temperature warning. MAINTENANCE : There are 5 submenus under the maintenance menu. ● BACK Select this submenu to return to the top page of the setting mode. ● ENGINE OIL Select this submenu to set or reset the distance for changing the engine oil. ● OIL FILTER Select this submenu to set or reset the distance for replacing the oil filter. ● TIRE Select this submenu to set or reset the distance for replacing tires. ● OTHER Select this submenu and set or reset the distance for replacing items other than the engine oil, oil filter and tires.

DISPLAY : There are 3 submenus under the display menu. ● BACK Select this submenu to return to the top page of the setting mode. ● LANGUAGE Select this submenu to choose English or French for display. ● UNIT Select this submenu to choose the unit from MPG or l/100 km.

7. Warning check SKIP : A to move to the switch 䊊 Push the warning check mode.

Push the menus.

switch

B 䊊

to select other

DETAIL : This item is available only when a warning is displayed. Select this menu to see the details of warnings.

Instruments and controls 2-25

SECURITY SYSTEMS The system helps deter vehicle theft but cannot prevent it, nor can it prevent the theft of interior or exterior vehicle components in all situations. Always secure your vehicle even if parking for a brief period. Never leave your Intelligent Key(s) in the vehicle, and always lock it when unattended. Be aware of your surroundings, and park in secure, well-lit areas whenever possible.

SIC4169

Your vehicle has two types of security systems, as follows: ● Vehicle security system ● INFINITI Vehicle Immobilizer System The security condition will be shown by the security indicator light.

VEHICLE SECURITY SYSTEM The vehicle security system provides visual and audio alarm signals if someone opens the doors, hood, or trunk lid when the system is armed. It is not, however, a motion detection type system that activates when a vehicle is moved or when a vibration occurs.

2-26 Instruments and controls

Many devices offering additional protection, such as component locks, identification markers, and tracking systems, are available at auto supply stores and specialty shops. Your INFINITI retailer may also offer such equipment. Check with your insurance company to see if you may be eligible for discounts for various theft protection features.

SIC2045

How to arm the vehicle security system 1. Close all windows. The system can be armed even if the windows are open. 2. Push the ignition switch to the OFF position. 3. Remove the Intelligent Key from the vehicle. 4. Close all doors, hood and trunk. Lock all doors. The doors can be locked with the Intelligent Key, door handle request switch, power door lock switch or mechanical key.

5. Confirm that the security indicator light comes on. The security indicator light stays on for about 30 seconds. The vehicle security system is now pre-armed. After about 30 seconds the vehicle security system automatically shifts into the armed phase. The security light begins to flash once every approximately 3 seconds. If, during this 30-second pre-arm time period, the door is unlocked, or the ignition switch is pushed to ACC or ON, the system will not arm. Even when the driver and/or passengers are in the vehicle, the system will activate with all doors, hood, and trunk lid locked with the ignition switch in the LOCK position. When pushing the ignition switch to the ACC or ON position, the system will be released.

Vehicle security system activation The vehicle security system will give the following alarm:

The alarm is activated by: ● Unlocking the door or opening the trunk lid without using the button on the Intelligent Key, the door handle request switch or the mechanical key. (Even if the door is opened by releasing the door inside lock knob, the alarm will activate.) ● Opening the hood.

How to stop an activated alarm The alarm will stop by unlocking a door by pushing the unlock button on the Intelligent Key, the door handle request switch or using the mechanical key, or when the ignition switch is pushed to the ACC or ON position. If the system does not operate as described above, have it checked by an INFINITI retailer.

INFINITI VEHICLE IMMOBILIZER SYSTEM The INFINITI Vehicle Immobilizer System will not allow the engine to start without the use of the registered Intelligent Key. Never leave these keys in the vehicle. Statement related to section 15 of FCC rules for INFINITI Vehicle Immobilizer System (CONT ASSY - CARD SLOT) This device complies with part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions; (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

● The headlights blink and the horn sounds intermittently. ● The alarm automatically turns off after approximately 1 minute. However, the alarm reactivates if the vehicle is tampered with again.

Instruments and controls 2-27

WINDSHIELD WIPER AND WASHER SWITCH If the light still remains on and/or the engine will not start, see an INFINITI retailer for INFINITI Vehicle Immobilizer System service as soon as possible. Please bring all Intelligent Keys that you have when visiting an INFINITI retailer for service.

WARNING In freezing temperatures the washer solution may freeze on the windshield and obscure your vision which may lead to an accident. Warm windshield with the defroster before you wash the windshield.

CAUTION ● Do not operate the washer continuously for more than 30 seconds. SIC2045

Security indicator light The security indicator light is located on the meter panel. It indicates the status of the INFINITI Vehicle Immobilizer System. The light blinks after the ignition switch was in the LOCK position. This function indicates the security systems equipped on the vehicle are operational. If the INFINITI Vehicle Immobilizer System is malfunctioning, this light will remain on while the ignition switch is in the ON position.

2-28 Instruments and controls

● Do not operate the washer if the reservoir tank is empty. ● Do not fill the window washer reservoir tank with washer fluid concentrates at full strength. Some methyl alcohol based washer fluid concentrates may permanently stain the grille if spilled while filling the window washer reservoir tank.

The windshield wiper and washer operates when the ignition switch is in the ON position.

● Pre-mix washer fluid concentrates with water to the manufacturer’s recommended levels before pouring the fluid into the window washer reservoir tank. Do not use the window washer reservoir tank to mix the washer fluid concentrate and water.

Push the lever down to operate the wiper at the following speed: 1 Intermittent — intermittent operation 䊊

SIC3238

Type A

SIC4281

Type A: The intermittent operation can be A adjusted by turning the knob toward 䊊 B (Faster). (Slower) or 䊊 When the speed sensing wiper interval function is turned on, the intermittent operation speed varies in accordance with the vehicle speed. (For example, when the vehicle speed is high, the intermittent operation speed will be faster.) To turn this function on and off, see “HOW TO USE SETTING BUTTON” in the “4. Monitor, climate, audio, phone and voice recognition systems” section. Type B: For models with the rain-sensing auto wiper system, see “RAIN-SENSING AUTO WIPER SYSTEM” later in this section. 2 Low — continuous low speed operation 䊊 3 High — continuous high speed operation 䊊 4 to have one sweep Push the lever up 䊊

operation of the wiper.

Type B

Instruments and controls 2-29

5 to operate the Pull the lever toward you 䊊 washer. Then the wiper will also operate several times.

The rain sensor sensitivity level can be adjusted 2 (High) by turning the knob toward the front 䊊 3 (Low). or toward the rear 䊊 ● High — High sensitive operation ● Low — Low sensitive operation To turn the rain-sensing auto wiper system off, push up the lever to the OFF position, or pull down the lever to the LO or HI position.

CAUTION SIC4190

RAIN-SENSING AUTO WIPER SYSTEM (if so equipped) The rain-sensing auto wiper system can automatically turn on the wipers and adjust the wiper speed depending on the rainfall and the vehicle speed by using the rain sensor located on the upper part of the windshield. To set the rain-sensing auto wiper system, push 1 . The the lever down to the AUTO position 䊊 wiper will sweep once while the ignition switch is in the ON position.

2-30 Instruments and controls

Do not touch the rain sensor and around it when the wiper switch is in the AUTO position and the ignition switch is in the ON position. The wipers may operate unexpectedly and cause to an injury or a wiper damage. ● The rain-sensing auto wipers are intended for use during rain. If the switch is left in the AUTO position, the wipers may operate unexpectedly when dirt, fingerprints, oil film or insects are stuck on or around the sensor. The wipers may also operate when exhaust gas or moisture affect the rain sensor. ● The rain-sensing auto wipers may not operate if rain does not hit the rain sensor even if it is raining.

REAR WINDOW AND OUTSIDE MIRROR DEFROSTER SWITCH ● When the windshield glass is coated with water repellent, the speed of the rainsensing auto wipers may be higher even though the amount of the rainfall is small.

HEADLIGHT AND TURN SIGNAL SWITCH XENON HEADLIGHTS WARNING

● Be sure to turn off the rain-sensing auto wiper system when you use a car wash.

HIGH VOLTAGE ● When xenon headlights are on, they produce a high voltage. To prevent an electric shock, never attempt to modify or disassemble. Always have your xenon headlights replaced at an INFINITI retailer.

● Using genuine wiper blades is recommended for proper operation of the rain-sensing auto wiper system. (See “WINDSHIELD WIPER BLADES” in the “8. Maintenance and do-ityourself” section for wiper blade replacement.) SIC3239

To defog/defrost the rear window glass and outside mirrors, start the engine and push the 1 on. The indicator light 䊊 2 will come switch 䊊 on. Push the switch again to turn the defroster off. It will automatically turn off in approximately 15 minutes.

● Xenon headlights provide considerably more light than conventional headlights. If they are not correctly aimed, they might temporarily blind an oncoming driver or the driver ahead of you and cause a serious accident. If headlights are not aimed correctly, immediately take your vehicle to an INFINITI retailer and have the headlights adjusted correctly.

CAUTION When cleaning the inner side of the rear window, be careful not to scratch or damage the rear window defroster.

Instruments and controls 2-31

When the xenon headlight is initially turned on, its brightness or color varies slightly. However, the color and brightness will soon stabilize. ● The life of xenon headlights will be shortened by frequent on-off operation. It is generally desirable not to turn off the headlights for short intervals (for example, when the vehicle stops at a traffic signal). Even when the daytime running lights are active (Canada only), the xenon headlights do not turn on. This way the life of the xenon headlights is not reduced. ● If the xenon headlight bulb is close to burning out, the brightness will drastically decrease, the light will start blinking, or the color of the light will become reddish. If one or more of the above signs appear, contact an INFINITI retailer.

SIC3267

SIC3268

HEADLIGHT SWITCH

Autolight system

Lighting

The autolight system allows the headlights to be set so they turn on and off automatically.

1 Turn the switch to the 䊊

position: The front park, side marker, tail, license plate and instrument lights will come on.

2 Turn the switch to the 䊊

position: Headlights will come on and all the other lights remain on.

To set the autolight system: 1. Make sure the headlight switch is in the 1 . AUTO position 䊊 2. Push the ignition switch to the ON position. 3. The autolight system automatically turns the headlights on and off. To turn the autolight system off, turn the switch or position. to the OFF,

2-32 Instruments and controls

The autolight system can turn on the headlights automatically when it is dark and turn off the headlights when it is light. If the ignition switch is pushed to the OFF position and one of the doors is opened and this condition is continued, the headlights remain on for 5 minutes. Automatic headlights off delay : You can keep the headlights on for up to 180 seconds after you push the ignition switch to OFF and open any door then close all the doors. You can adjust the period of the automatic headlights off delay from 0 seconds (OFF) to 180 seconds. The factory default setting is 45 seconds. For automatic headlights off delay setting, see “Light Off Delay” in the “4. Monitor, climate, audio, phone and voice recognition systems” section.

SIC4192

Be sure not to put anything on top of the photo A located on the top of the instrument sensor 䊊 panel. The photo sensor controls the autolight; if it is covered, the photo sensor reacts as if it is dark and the headlights will illuminate.

SIC3269

Headlight beam select 1 To select the low beam, put the lever in 䊊

the neutral position as shown.

2 To select the high beam, push the lever 䊊

forward while the switch is in the position. Pull it back to select the low beam.

3 Pulling the lever toward you will flash the 䊊

headlight high beam even when the headlight switch is in the OFF position.

Instruments and controls 2-33

Battery saver system A chime will sound when the driver side door is or opened with the light switch in the position and the ignition switch in the ACC, OFF or LOCK position. or When the headlight switch is in the position while the ignition switch is in the ON position, the lights will automatically turn off 5 minutes after the ignition switch has been pushed to the OFF position. When the headlight switch remains in the or position after the lights automatically turn off, the lights will turn on when the ignition switch is pushed to the ON position.

CAUTION ● When you turn on the headlight switch again after the lights automatically turn off, the lights will not turn off automatically. Be sure to turn the light switch to the OFF position when you leave the vehicle for extended periods of time, otherwise the battery will be discharged. ● Never leave the light switch on when the engine is not running for extended periods of time even if the headlights turn off automatically.

2-34 Instruments and controls

Daytime running light system (Canada only) The daytime running lights automatically illuminate when the engine is started with the parking brake released. The daytime running lights operate with the headlight switch in the OFF, position. Turn the headlight AUTO or position for full illumination switch to the when driving at night. If the parking brake is applied before the engine is started, the daytime running lights do not illuminate. The daytime running lights illuminate once the parking brake is released. The daytime running lights will remain on until the ignition switch is pushed to the OFF position.

SIC3257

Instrument brightness control The instrument brightness control switch can be operated when the ignition switch is in the ON position. When the switch is operated, the dot matrix liquid crystal display switches to the brightness adjustment mode. A to brighten the Push the upper switch 䊊 1 moves to instrument panel lights. The bar 䊊 the + side. When reaching the maximum bright2 . ness, “MAX” appears on the display 䊊

B to dim the instrument Push the lower switch 䊊 1 moves to the ⫺ side. panel lights. The bar 䊊 When reaching the minimum brightness, “MIN” 3 . However, “MIN” appears on the display 䊊 does not appear during the nighttime.

The dot matrix liquid crystal display returns to the normal display under the following conditions: ● when the instrument brightness control switch is not operated for more than 5 seconds. ● when the side or front of the

switch or

SIC3271

TURN SIGNAL SWITCH 1 Turn signal 䊊 Move the lever up or down to signal the turning direction. When the turn is completed, the turn signals cancel automatically.

2 Lane change signal 䊊 To indicate a lane change, move the lever up or down to the point where lights begin flashing.

switch on the right side of the combination meter panel is pushed. SIC3270

Instruments and controls 2-35

HAZARD WARNING FLASHER SWITCH The flasher can be actuated with the ignition switch in any position. Some state laws may prohibit the use of the hazard warning flasher switch while driving.

SIC3272

FOG LIGHT SWITCH To turn the fog lights on, turn the headlight position, then turn the switch to the position. To turn them off, switch to the turn the switch to the OFF position.

SIC2574

Push the switch on to warn other drivers when you must stop or park under emergency conditions. All turn signal lights will flash.

WARNING

The headlights must be on for the fog lights to operate.

● If stopping for an emergency, be sure to move the vehicle well off the road.

When the headlight switch is in the AUTO position and the fog light switch is in the position, the headlights and fog lights turn ON at night.

● Do not use the hazard warning flashers while moving on the highway unless unusual circumstances force you to drive so slowly that your vehicle might become a hazard to other traffic. ● Turn signals do not work when the hazard warning flasher lights are on.

2-36 Instruments and controls

HORN

HEATED SEATS (if so equipped)

WARNING Do not use or allow occupants to use the seat heater if you or the occupants cannot monitor elevated seat temperatures or have an inability to feel pain in those body parts in contact with the seat. Use of the seat heater by such people could result in serious injury.

● If any abnormalities are found or the heated seat does not operate, turn the switch off and have the system checked by an INFINITI retailer.

CAUTION SIC3312

● The battery could run down if the seat heater is operated while the engine is not running.

To sound the horn, push the center pad area of the steering wheel.

● Do not use the seat heater for extended periods or when no one is using the seat.

WARNING Do not disassemble the horn. Doing so could affect proper operation of the supplemental front air bag system. Tampering with the supplemental front air bag system may result in serious personal injury.

● Do not put anything on the seat which insulates heat, such as a blanket, cushion, seat cover, etc. Otherwise, the seat may become overheated. ● Do not place anything hard or heavy on the seat or pierce it with a pin or similar object. This may result in damage to the heater. ● Any liquid spilled on the heated seat should be removed immediately with a dry cloth. ● When cleaning the seat, never use gasoline, thinner, or any similar materials.

Instruments and controls 2-37

CLIMATE CONTROLLED SEATS (if so equipped) 3. To turn off the heater, return the knob to 3 . Make sure that the the OFF position 䊊 indicator light turns off. The heater is controlled by a thermistor, automatically turning the heater on and off. The indicator light will remain on as long as the switch is on. When the vehicle’s interior is warmed, or before you leave the vehicle, be sure to turn off the switch. SSS0911

SIC4040

The front seats are warmed by built-in heaters. The switches located on the center console can be operated independently of each other.

The climate controlled seat warms up or cools down the front seats by blowing warm or cool air from the surface of the seat. The switches located on the center console can be operated independently of each other.

1. Start the engine. A to the right 䊊 1 2. Turn the control knob 䊊 and select the desired heat range.

● For high heat, turn the knob to the right 1 . 䊊

2 . ● For low heat, turn the knob to the left 䊊

B will illuminate when ● The indicator light 䊊 the heater is on.

2-38 Instruments and controls

The surface temperature of the climate controlled seats is automatically controlled at an optimum temperature. However, adjust the temperature using the control knob if the seats are too hot or cold. 1. Start the engine. A to the heat side 2. Turn the control knob 䊊 1 or to the cool side 䊊 2 . The indicator 䊊 B on the control knob will illumilight 䊊 nate.

VEHICLE DYNAMIC CONTROL (VDC) OFF SWITCH 3. Adjust the desired amount of the air using A . the control knob 䊊 4. When the vehicle’s interior is warmed or cooled, and/or before you leave the vehicle, be sure to turn the control knob to the OFF position (center). The indicator B on the control knob goes off at light 䊊 the OFF position. To check the air filter for the climate controlled seat, contact an INFINITI retailer.

CAUTION ● Do not place objects in front of the intake inlet located behind the front seat. Doing so could cause improper operation or interruption of the operation. ● The battery could run down if the climate controlled seat is operated while the engine is not running. ● Do not use the climate controlled seat for extended periods or when no one is using the seat. ● Do not put anything on the seat which insulates heat, such as a blanket, cushion, seat cover, etc. Otherwise, the seat may become overheated.

● Do not place anything hard or heavy on the seat or pierce it with a pin or similar object. This may result in damage to the climate controlled seat. ● Any liquid spilled on the seat should be removed immediately with a dry cloth. ● The climate controlled seat has air filters. Do not operate the climate controlled seat without the air filters. This may result in damage to the system. ● When cleaning the seat, never use gasoline, thinner, or any similar materials.

JVS0022X

● If any malfunctions are found or the climate controlled seat does not operate, turn the switch off and have the system checked by an INFINITI retailer.

The vehicle should be driven with the Vehicle Dynamic Control (VDC) system on for most driving conditions. If the vehicle is stuck in mud or snow, the VDC system reduces the engine output to reduce wheel spin. The engine speed will be reduced even if the accelerator is depressed to the floor. If maximum engine power is needed to free a stuck vehicle, turn the VDC system off. To turn off the VDC system, push the VDC OFF indicator will illuminate. switch. The

Instruments and controls 2-39

CLOCK Push the VDC OFF switch again or restart the engine to turn on the system. (See “VEHICLE DYNAMIC CONTROL (VDC) SYSTEM” in the “5. Starting and driving” section.)

For details about display clock adjustment (if so equipped), see “HOW TO USE SETTING BUTTON” in the “4. Monitor, climate, audio, phone and voice recognition systems” section.

SIC3325

If the power supply is disconnected, the clock will not indicate the correct time. Readjust the time.

ADJUSTING THE TIME 1. To set the clock forward, push the button 1 . 䊊 2. To set the clock backward, push the but2 . ton 䊊 3. To move forward or backward faster, push and hold the button more than 5 seconds.

2-40 Instruments and controls

POWER OUTLETS

● Avoid using power outlet when the air conditioner, headlights or rear window defroster is on. ● This power outlet is not designed for use with a cigarette lighter unit. ● Push the plug in as far as it will go. If good contact is not made, the plug may overheat or the internal temperature fuse may blow.

SIC4302

Automatic transmission models

SIC4684

Manual transmission models

● Before inserting or disconnecting a plug, be sure the electrical accessory being used is turned OFF. ● When not in use, be sure to close the cap. Do not allow water to contact the outlet.

The power outlet is located in the center console box and storage box (if so equipped).

CAUTION ● The outlet and plug may be hot during or immediately after use. ● Do not use with accessories that exceed a 12 volt, 120W (10A) power draw. Do not use double adapters or more than one electrical accessory. SIC4316

● Use power outlet with the engine running to avoid discharging the vehicle battery.

Automatic transmission models

Instruments and controls 2-41

CIGARETTE LIGHTER AND ASHTRAYS (if so equipped) CAUTION ● The cigarette lighter socket is a power source for the cigarette lighter element only. The use of the cigarette lighter socket as a power source for any other accessory is not recommended. ● Do not use any other power outlet for an accessory lighter.

SIC3219

FRONT To open the ashtray lid, push the lid down and 1 . release it 䊊

2 . To empty the ashtray, pull out 䊊

The cigarette lighter operates when the ignition switch is in the ON position. 3 , then release Push the lighter in all the way 䊊 it. When the lighter is heated, it will spring out. Return the lighter to its original position after use.

2-42 Instruments and controls

SIC2570

REAR 1 . To open the ashtray lid, pull 䊊

2 , and pull To empty the ashtray, push down 䊊 out.

STORAGE CUP HOLDERS CAUTION ● Avoid abrupt starting and braking when the cup holder is being used to prevent spilling the drink. If the liquid is hot, it can scald you or your passenger. ● Use only soft cups in the cup holder. Hard objects can injure you in an accident.

SIC4689

Automatic transmission models — Front 1 . To open the cup holder, push the lid 䊊

A will be folded down when inserting The flap 䊊 a large container.

SIC3925

Manual transmission models — Front 1 . To open the cup holder, slide the lid 䊊

2 . Install the partition plate into the slit 䊊

Instruments and controls 2-43

SIC4173

Manual transmission models — Console box A To open the console boxes, push the knob 䊊 and pull up the lid.

To close, push the lid down until the lock latches.

SIC4041

Soft bottle holder CAUTION ● Do not use bottle holder for any other objects that could be thrown about in the vehicle and possibly injure people during sudden braking or an accident. ● Do not use bottle holder for open liquid containers.

2-44 Instruments and controls

SIC3469

GLOVE BOX WARNING Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop. 1 . To open the glove box, pull the handle 䊊

To close, push the lid in until the lock latches. 2 /unlock 䊊 3 the glove box, use the To lock 䊊 mechanical key. For the mechanical key usage, see “KEYS” in the “3. Pre-driving checks and adjustments” section.

SIC4363

Automatic transmission models

SIC4174

Manual transmission models

CONSOLE BOX A To open the console boxes, push the knob 䊊 and pull up the lid.

To close, push the lid down until latched. The inner tray (if so equipped) can be moved to the front or rear position.

SIC3468

Coupe — Manual transmission model

Instruments and controls 2-45

WINDOWS Removing the console lid (Manual transmission model)

POWER WINDOWS WARNING

To remove the console lid: A using a screw1. Remove the hinge mask 䊊 driver wrapped with a cloth. 2. Loosen four screws, and remove the lid. B . 3. Tighten the two outside screws 䊊 A to the 4. Install the removed hinge mask 䊊 original position.

● Make sure that all passengers have their hands, etc. inside the vehicle while it is in motion and before closing the windows. Use the window lock switch to prevent unexpected use of the power windows.

SIC4308

● Do not leave children unattended inside the vehicle. They could unknowingly activate switches or controls and become trapped in the window. Unattended children could become involved in serious accidents.

STORAGE BOX (if so equipped) 1 as illusTo open, push the storage box lid 䊊 trated.

Do not use the storage box as an ashtray.

2-46 Instruments and controls

The power windows operate when the ignition switch is in the ON position or for about 45 seconds after the ignition switch is pushed to the OFF position. If the driver’s or front passenger’s door is opened during this period of about 45 seconds, power to the windows is canceled.

Locking passengers’ windows C is pushed in, only the When the lock button 䊊 driver side window can be opened or closed. Push it in again to cancel.

SIC3279

Main power window switch (driver’s side) 1. 2. 3. 4. 5.

Driver side window Front passenger side window Rear left passenger side window Rear right passenger side window Window lock button

SIC3241

Passenger side power window switch The passenger side switch will open or close only the corresponding window. To open or close the window, push down or pull up the switch and hold it.

A or To open or close the window, push down 䊊 B the switch and hold it. The main pull up 䊊 switch (driver side switches) will open or close all the windows.

Instruments and controls 2-47

Simultaneous operation of all four windows WARNING There is a small distance just before the closed position that cannot be detected. Make sure that all passengers have their hands, etc. inside the vehicle before closing the windows.

SIC3289

Automatic operation (for front door windows) To fully open or close the window, completely push down or pull up the switch and release it; it need not be held. The window will automatically open or close all the way. To stop the window, just push or lift the switch in the opposite direction. A light push or pull on the switch will cause the window to open or close until the switch is released. The rear window automatic operation is for the opening function only.

2-48 Instruments and controls

When the driver’s and passenger’s door window switches are pushed down or pulled up simultaneously, all four windows are opened or closed.

Auto reverse function WARNING There are some small distances immediately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., inside the vehicle before closing the window. If the control unit detects something caught in the window as it is closing, the window will be immediately lowered.

The auto reverse function can be activated when the window is closed by automatic operation when the ignition switch is in the ON position or for 45 seconds after the ignition switch is pushed to the OFF position. Depending on the environment or driving conditions, the auto reverse function may be activated if an impact or load similar to something being caught in the window occurs.

Automatic adjusting function CAUTION When the battery cable is removed from the battery terminal, do not close either of the front doors. The automatic window adjusting function will not work and the side roof panel may be damaged. The power window has an automatic adjusting function. When the door is being opened, the window is automatically lowered slightly to avoid contact between the window and the side roof panel. When the door is closed, the window is automatically raised slightly.

INTERIOR LIGHTS While the automatic adjusting function does not work, the window will be controlled as follows: ● When the door is opened, the window lowers for approximately 0.39 in (10 mm). ● While the door is open, the window cannot be raised.

If the windows do not close automatically If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system. 1. Push the ignition switch to the ON position. 2. Close the door and hard top.

If the power window automatic function does not operate properly after performing the procedure above, have your vehicle checked by an INFINITI retailer.

Automatic window lowering When the retractable hard top operating switch is pressed, the power windows will automatically be lowered completely. The windows do not rise automatically after the retractable hard top operation is completed. Use the power window switches to raise them. SIC4043

MAP LIGHTS Push the button as illustrated to turn the light on or off.

3. Open the window completely by operating the power window switch. 4. Pull the power window switch and hold it to close the window, and then hold the switch more than 3 seconds after the window is closed completely. 5. Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete. 6. Perform steps 2 through 5 above for other windows.

Instruments and controls 2-49

DOOR position 2 , the When the switch is in the DOOR position 䊊 map lights will illuminate under the following conditions:

● ignition switch is switched to the OFF or LOCK position – remain on for about 15 seconds.

SIC4044

INTERIOR LIGHT CONTROL SWITCH The interior light control switch has three positions: ON, DOOR and OFF.

ON position 1 the When the switch is in the ON position 䊊 map lights will illuminate.

● doors are unlocked by pushing the UNLOCK button on the Intelligent Key or door handle request switch with the ignition switch in the LOCK position – remain on for about 15 seconds. ● any door is opened and then closed with the ignition switch in the LOCK position – remain on for about 15 seconds. ● any door is opened with the ignition switch in the ACC or ON position – remain on while the door is opened. When the door is closed, the lights go off. The lights will also turn off after 15 minutes when the lights remain illuminated after the ignition switch has been pushed to the OFF or LOCK position to prevent the battery from becoming discharged.

2-50 Instruments and controls

When the auto interior illumination is set to the OFF position (see “VEHICLE INFORMATION AND SETTINGS” in the “4. Monitor, climate, audio, phone and voice recognition systems” section), the lights will illuminate under the following condition: ● any door is opened with the ignition switch in any position – remain on while the door is opened. When the door is closed, the lights go off.

OFF position 3 , the When the switch is in the OFF position 䊊 lights will not illuminate, regardless of the condition.

CAUTION Do not use for extended periods of time with the engine stopped. This could result in a discharged battery.

VANITY MIRROR LIGHTS

TRUNK LIGHT

HOMELINK姞 UNIVERSAL TRANSCEIVER (if so equipped)

The light illuminates when the trunk lid is opened. When the trunk lid is closed, the light will turn off.

HomeLink姞 Universal Transceiver provides a convenient way to consolidate the functions of up to three individual hand-held transmitters into one built-in device.

The light will also turn off after 15 minutes when the light remains illuminated after the ignition switch has been pushed to the OFF or LOCK position to prevent the battery from becoming discharged.

SIC2064

The light on the vanity mirror will turn on when the cover on the vanity mirror is opened. When the cover is closed, the light will turn off. The lights will also turn off after 15 minutes when the lights remain illuminated to prevent the battery from becoming discharged.

HomeLink姞 Universal Transceiver: ● Will operate most Radio Frequency (RF) devices such as garage doors, gates, home and office lighting, entry door locks and security systems. ● Is powered by your vehicle’s battery. No separate batteries are required. If the vehicle’s battery is discharged or is disconnected, HomeLink姞 will retain all programming. Once HomeLink姞 Universal Transceiver is programmed, retain the original transmitter for future programming procedures (Example: new vehicle purchases). Upon sale of the vehicle, the programmed HomeLink姞 Universal Transceiver buttons should be erased for security purposes. For additional information, see “PROGRAMMING HomeLink姞” later in this section.

Instruments and controls 2-51

WARNING ● Do not use HomeLink姞 Universal Transceiver with any garage door opener that lacks safety stop and reverse features as required by federal safety standards. (These standards became effective for opener models manufactured after April 1, 1982.) A garage door opener which cannot detect an object in the path of a closing garage door and then automatically stop and reverse, does not meet current federal safety standards. Using a garage door opener without these features increases the risk of serious injury or death. ● During programming procedure, your garage door or security gate may open or close. Make sure that people and objects are clear of the garage door, gate, etc. that you are programming. ● Your vehicle’s engine should be turned off while programming HomeLink姞 Universal Transceiver.

2-52 Instruments and controls

PROGRAMMING HOMELINK姞 To program your HomeLink姞 Transceiver to operate a garage door, gate, or entry door opener, home or office lighting, you need to be at the same location as the device. Note: Garage door openers (manufactured after 1996) have “rolling code protection”. To program a garage door opener equipped with “rolling code protection”; you will need to use a ladder to get up to the garage door opener motor to be able to access the “smart or learn” program button. SIC3612

1. To begin, push and hold the 2 outer HomeLink姞 buttons (to clear the memory) A blinks (after 20 until the indicator light 䊊 seconds). Release both buttons. 2. Position the end of the hand-held transmitter 1-3 inches away from the HomeLink姞 surface.

SIC3613

3. Using both hands, simultaneously push and hold both the HomeLink姞 button you want to program and the hand-held transmitter button. DO NOT release the buttons until step 4 has been completed.

4. Hold down both buttons until the indicator light on HomeLink姞 flashes, changing from a “slow blink” to a “rapid blink”. This could take up to 90 seconds. When the indicator light blinks rapidly, both buttons may be released. The rapidly flashing light indicates successful programming. To activate the garage door or other programmed device, push and hold the programmed HomeLink姞 button - releasing when the device begins to activate. 5. If the indicator light on HomeLink姞 blinks rapidly for two seconds and then turns solid, HomeLink姞 has picked up a “rolling code” garage door opener signal. You will need to proceed with the next steps to train HomeLink姞, completing the programming may require a ladder and another person for convenience. 6. Push and release the program button located on the garage door opener’s motor to activate the “training mode”. This button is usually located near the antenna wire that hangs down from the motor. If the wire originates from under a light lens, you will need to remove the lens to access the training button.

NOTE: Once you have pushed and released the training button on the garage door opener’s motor and the “training light” is lit, you have 30 seconds in which to perform step 7. For convenience, use the help of a second person to assist when performing this step. 7. Quickly (within 30 seconds of pushing and releasing the garage door opener training button) and firmly push and release the HomeLink姞 button you’ve just programmed. Push and release the HomeLink姞 button up to three times to complete the training. 8. Your HomeLink姞 button should now be programmed. To program the remaining HomeLink姞 buttons for additional door or gate openers, follow steps 2 through 8 only. NOTE: Do not repeat step 1 unless you want to “clear” all previously programmed HomeLink姞 buttons. If you have any questions or are having difficulty programming your HomeLink姞 buttons, please refer to the HomeLink姞 web site at: www.homelink.com or call 1-800-355-3515.

Instruments and controls 2-53

PROGRAMMING HOMELINK姞 FOR CANADIAN CUSTOMERS Prior to 1992, D.O.C. regulations required handheld transmitters to stop transmitting after 2 seconds. To program your hand-held transmitter to HomeLink姞, continue to push and hold the HomeLink姞 button (note steps 2 through 4 under “Programming HomeLink姞”) while you push and re-push (“cycle”) your hand-held transmitter every 2 seconds until the indicator light flashes rapidly (indicating successful programming). NOTE: If programming a garage door opener, etc., it is advised to unplug the device during the “cycling” process to prevent possible damage to the garage door opener components.

OPERATING THE HOMELINK姞 UNIVERSAL TRANSCEIVER HomeLink姞 Universal Transceiver (once programmed) may now be used to activate the garage door, etc. To operate, simply push the appropriate programmed HomeLink姞 Universal Transceiver button. The red indicator light will illuminate while the signal is being transmitted.

2-54 Instruments and controls

PROGRAMMING TROUBLE-DIAGNOSIS If HomeLink姞 does not quickly learn the handheld transmitter information: ● replace the hand-held transmitter batteries with new batteries. ● position the hand-held transmitter with its battery area facing away from the HomeLink姞 surface. ● push and hold both the HomeLink姞 and hand-held transmitter buttons without interruption. ● position the hand-held transmitter 2 to 5 in (50 to 127 mm) away from the HomeLink姞 surface. Hold the transmitter in that position for up to 15 seconds. If HomeLink姞 is not programmed within that time, try holding the transmitter in another position - keeping the indicator light in view at all times. If you continue to have programming difficulties, please contact the INFINITI Consumer Affairs Department. The phone numbers are located in the Foreword of this Owner’s Manual.

CLEARING THE PROGRAMMED INFORMATION Individual buttons cannot be cleared, however to clear all programming, push and hold the two outside buttons and release when the indicator light begins to flash (in approximately 20 seconds).

REPROGRAMMING A SINGLE HOMELINK姞 BUTTON To reprogram a HomeLink姞 Universal Transceiver button, complete the following. 1. Push and hold the desired HomeLink姞 button. Do not release the button until step 4 has been completed. 2. When the indicator light begins to flash slowly (after 20 seconds), position the hand-held transmitter 2 to 5 in (50 to 127 mm) away from the HomeLink姞 surface. 3. Push and hold the hand-held transmitter button. 4. The HomeLink姞 indicator light will flash, first slowly and then rapidly. When the indicator light begins to flash rapidly, release both buttons.

The HomeLink姞 Universal Transceiver button has now been reprogrammed. The new device can be activated by pushing the HomeLink姞 button that was just programmed. This procedure will not affect any other programmed HomeLink姞 buttons.

IF YOUR VEHICLE IS STOLEN

The transmitter has been tested and complies with FCC and DOC/MDC rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device. DOC: ISTC 1763K1313 FCC I.D.: CB2V67690

If your vehicle is stolen, you should change the codes of any non-rolling code device that has been programmed into HomeLink姞. Consult the Owner’s Manual of each device or call the manufacturer or retailer of those devices for additional information. When your vehicle is recovered, you will need to reprogram the HomeLink姞 Universal Transceiver with your new transmitter information. FCC Notice: This device complies with FCC rules part 15. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference that may be received, including interference that may cause undesired operation.

Instruments and controls 2-55

3 Pre-driving checks and adjustments

Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Intelligent Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Valet hand-off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Locking with mechanical key . . . . . . . . . . . . . . . . . . . . 3-4 Opening and closing windows with the mechanical key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Locking with inside lock knob . . . . . . . . . . . . . . . . . . . 3-5 Locking with power door lock switch. . . . . . . . . . . . . 3-5 Automatic door locks . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 Intelligent Key system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6 Intelligent Key operating range . . . . . . . . . . . . . . . . . . 3-8 Door locks/unlocks precaution . . . . . . . . . . . . . . . . . . 3-8 Intelligent Key operation . . . . . . . . . . . . . . . . . . . . . . . . 3-9 Battery saver system . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11 Warning signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11 Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . 3-12 Remote keyless entry system. . . . . . . . . . . . . . . . . . . . . . 3-14 How to use remote keyless entry system . . . . . . . . 3-14 Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-17 Retractable hard top. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18 Before operating the retractable hard top . . . . . . . 3-18 When operating the retractable hard top . . . . . . . . 3-20 Indicators for the retractable hard top . . . . . . . . . . 3-22

Opening the retractable hard top . . . . . . . . . . . . . . . 3-23 Closing the retractable hard top . . . . . . . . . . . . . . . . 3-24 If the retractable hard top does not open or close electrically. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24 Operating the retractable hard top using the Intelligent Key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25 Initializing of the retractable hard top. . . . . . . . . . . 3-25 Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . 3-26 Trunk lid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28 Trunk lid release switch. . . . . . . . . . . . . . . . . . . . . . . . 3-28 Trunk open request switch . . . . . . . . . . . . . . . . . . . . . 3-28 Auto closure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28 Trunk release power cancel switch. . . . . . . . . . . . . . 3-29 Interior trunk lid release . . . . . . . . . . . . . . . . . . . . . . . 3-30 Fuel-filler door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-30 Opening the fuel-filler door . . . . . . . . . . . . . . . . . . . . 3-30 Fuel-filler cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-31 Tilt/telescopic steering . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-33 Manual operation (if so equipped) . . . . . . . . . . . . . . 3-33 Electric operation (if so equipped) . . . . . . . . . . . . . . 3-33 Sun visors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-34 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-34 Inside mirror. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-34 Outside mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-35

Vanity mirror. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-36 Automatic drive positioner (if so equipped) . . . . . . . . . 3-36 Seat synchronization function . . . . . . . . . . . . . . . . . . 3-37

Memory storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-38 System operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-39

KEYS A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet), not in the vehicle. If you lose your keys, see an INFINITI retailer for duplicates by using the key number. INFINITI does not record any key numbers so it is very important to keep track of your key number plate.

when registering new keys, be sure to take all Intelligent Keys that you have to the INFINITI retailer. It is possible that the Intelligent Key functions become canceled. Contact an INFINITI retailer.

CAUTION

A key number is only necessary when you have lost all keys and do not have one to duplicate from. If you still have a key, this key can be duplicated by an INFINITI retailer. SPA2222

1. Intelligent Keys (2) 2. Mechanical keys (inside the Keys) (2) 3. Key number plate (1)

INTELLIGENT KEY Your vehicle can only be driven with the Intelligent Keys which are registered to your vehicle’s Intelligent Key system components and INFINITI Vehicle Immobilizer System components. As many as 4 Intelligent Keys can be registered and used with one vehicle. The new keys must be registered by an INFINITI retailer prior to use with the Intelligent Key system and INFINITI Vehicle Immobilizer System of your vehicle. Since the registration process requires erasing all memory in the Intelligent Key components

3-2 Pre-driving checks and adjustments

● Be sure to carry the Intelligent Key with you when driving. The Intelligent Key is a precision device with a built-in transmitter. To avoid damaging it, please note the following. – The Intelligent Key is water resistant; however, wetting may damage the Intelligent Key. If the Intelligent Key gets wet, immediately wipe until it is completely dry. – Do not bend, drop or strike it against another object. – Do not place the Intelligent Key for an extended period in a place where temperatures exceed 140°F (60°C). – Do not change or modify the Intelligent Key. – Do not use a magnet key holder.

CAUTION

– Do not place the Intelligent Key near an electric appliance such as a television set or personal computer.

Always carry the mechanical key installed in the key.

– Do not allow the Intelligent Key to come into contact with water or salt water, and do not wash it in a washing machine. This could affect the system function. ● If an Intelligent Key is lost or stolen, INFINITI recommends erasing the ID code of that Intelligent Key. This will prevent the Intelligent Key from unauthorized use to unlock the vehicle. For information regarding the erasing procedure, please contact an INFINITI retailer.

VALET HAND-OFF When you have to leave a key with a valet, give them the Intelligent Key itself and keep the mechanical key with you to protect your belongings. SPA2033

Mechanical key To remove the mechanical key, release the lock knob at the back of the Intelligent Key. To install the mechanical key, firmly insert it into the Intelligent Key until the lock knob returns to the lock position. Use the mechanical key to lock or unlock the doors and glove box if they are equipped with a key cylinder. See “DOORS” later in this section and “STORAGE” in the “2. Instruments and controls” section.

To prevent the glove box and the trunk from being opened during valet hand-off, follow the procedures below. 1. Push the trunk release power cancel switch to the CANCEL side. 2. Remove the mechanical key from the Intelligent Key. 3. Lock the glove box with the mechanical key. 4. Hand the Intelligent Key to the valet, keeping the mechanical key in your pocket or bag for insertion into the Intelligent Key when you retrieve your vehicle. See “TRUNK LID” later in this section and “STORAGE” in the “2. Instruments and controls” section.

Pre-driving checks and adjustments 3-3

DOORS ● You can switch the lock system to the mode that allows you to open all the doors when the key is turned once. (See “HOW TO USE SETTING BUTTON” in the “4. Monitor, climate, audio, phone and voice recognition systems” section.)

WARNING ● Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent persons from being thrown from the vehicle. This also helps keep children and others from unintentionally opening the doors, and will help keep out intruders.

OPENING AND CLOSING WINDOWS WITH THE MECHANICAL KEY

● Before opening any door, always look for and avoid oncoming traffic. ● Do not leave children unattended inside the vehicle. They could unknowingly activate switches or controls. Unattended children could become involved in serious accidents.

SPA2626

LOCKING WITH MECHANICAL KEY The power door lock system allows you to lock or unlock all doors simultaneously using the mechanical key. ● Turning the driver’s door key cylinder to the 1 will lock all doors. rear of the vehicle 䊊

● Turning the driver’s door key cylinder once 2 will unlock the to the front of the vehicle 䊊 driver’s door. After returning the key to the 3 , turning it to the front neutral position 䊊 again within 5 seconds will unlock all doors.

3-4 Pre-driving checks and adjustments

The driver’s door key operation also allows you to open and close the window that is equipped with the automatic open/close function. (See “POWER WINDOWS” in the “2. Instruments and controls” section.) To open the window, turn the driver’s door key cylinder to the rear of the vehicle for longer than 1 second . The door is unlocked and the window keeps opening while turning the key. This function can also be performed by pushing and holding the UNLOCK button on the Intelligent Key. (See “REMOTE KEYLESS ENTRY SYSTEM” later in this section.) To close the windows, turn the driver’s door key cylinder to the front of the vehicle for longer than 1 second . The door is locked and the window keeps closing while turning the key.

To unlock the doors including the fuel-filler door, push the power door lock switch to the 2 . unlock position 䊊

Lockout protection

SPA1814

LOCKING WITH INSIDE LOCK KNOB To lock the door individually, move the inside 1 then close the lock knob to the lock position 䊊 door. To unlock, move the inside lock knob to the 2 . unlock position 䊊 When locking the door without an Intelligent Key, be sure not to leave the Intelligent Key inside the vehicle.

SPA2300

LOCKING WITH POWER DOOR LOCK SWITCH Operating the power door lock switch will lock or unlock all the doors. The switches are located on the driver’s and front passenger’s door armrests. To lock the doors, push the power door lock 1 with the driver’s switch to the lock position 䊊 or front passenger’s door open, then close the door. When locking the door this way, be certain not to leave the Intelligent Key inside the vehicle.

When the power door lock switch (driver or front passenger) is moved to the lock position with the Intelligent Key in the port and any door open, all doors will lock and unlock automatically. With the Intelligent Key left in the vehicle (not in the Intelligent Key port) and any door open, all doors will unlock automatically and a chime will sound after the door is closed. These functions help to prevent the Intelligent Key from being accidentally locked inside the vehicle.

AUTOMATIC DOOR LOCKS ● All doors lock automatically when the vehicle speed reaches 15 MPH (24 km/h). ● All doors unlock automatically when the ignition switch is placed in the OFF position. The automatic unlock function can be deactivated or activated. To deactivate or activate the automatic door unlock system, perform the following procedure: 1. Close all doors. 2. Place the ignition switch in the ON position.

Pre-driving checks and adjustments 3-5

INTELLIGENT KEY SYSTEM 3. Within 20 seconds of performing Step 2, push and hold the power door lock switch position (UNLOCK) for more to the than 5 seconds. 4. When activated, the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once. 5. The ignition switch must be placed in the OFF and ON position again between each setting change. When the automatic door unlock system is deactivated, the doors do not unlock when the ignition switch is placed in the OFF position. To unlock the door manually, use the inside lock knob or the power door lock switch (driver’s or front passenger’s side).

WARNING ● Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufacturer for the possible influences before use.

CAUTION ● Be sure to carry the Intelligent Key with you when operating the vehicle. ● Never leave the Intelligent Key in the vehicle when you leave the vehicle.

● The Intelligent Key transmits radio waves when the buttons are pushed. The FAA advises that the radio waves may affect aircraft navigation and communication systems. Do not operate the Intelligent Key while on an airplane. Make sure the buttons are not operated unintentionally when the unit is stored during a flight.

The Intelligent Key is always communicating with the vehicle as it receives radio waves. The Intelligent Key system transmits weak radio waves. Environmental conditions may interfere with the operation of the Intelligent Key system under the following operating conditions.

The Intelligent Key system can operate all the door and the trunk lid lock using the remote controller function or pushing the request switch on the vehicle without taking the key out from a pocket or purse. The operating environment and/or conditions may affect the Intelligent Key system operation.

● When in possession of wireless equipment, such as a cellular telephone, transceiver, and CB radio.

Be sure to read the following before using the Intelligent Key system.

● When operating near a location where strong radio waves are transmitted, such as a TV tower, power station and broadcasting station.

● When the Intelligent Key is in contact with or covered by metallic materials. ● When any type of radio wave remote control is used nearby. ● When the Intelligent Key is placed near an electric appliance such as a personal computer.

3-6 Pre-driving checks and adjustments

● When the vehicle is parked near a parking meter. In such cases, correct the operating conditions before using the Intelligent Key function or use the mechanical key. Although the life of the battery varies depending on the operating conditions, the battery’s life is approximately 2 years. If the battery is discharged, replace it with a new one. When the Intelligent Key battery is almost discharged, insert the Intelligent Key into the Intelligent Key port to start the engine. For more details, see “PUSH-BUTTON IGNITION SWITCH” in the “5. Starting and driving” section. Replace the discharged battery with a new one as soon as possible. Since the Intelligent Key is continuously receiving radio waves, if the key is left near equipment which transmits strong radio waves, such as signals from a TV and personal computer, the battery life may become shorter. For information regarding replacement of a battery, see “INTELLIGENT KEY BATTERY REPLACEMENT” in the “8. Maintenance and do-ityourself” section.

For models with a steering wheel lock mechanism: Because the steering wheel is locked electrically, unlocking the steering wheel with the ignition switch in the LOCK position is impossible when the vehicle battery is completely discharged. Pay special attention that the vehicle battery is not completely discharged. As many as 4 Intelligent Keys can be registered and used with one vehicle. For information about the purchase and use of additional Intelligent Keys, contact an INFINITI retailer.

● If the outside temperature is below 14°F (⫺10°C) degrees, the battery of the Intelligent Key may not function properly. ● Do not place the Intelligent Key for an extended period in an area where temperatures exceed 140°F (60°C). ● Do not attach the Intelligent Key with a key holder that contains a magnet. ● Do not place the Intelligent Key near equipment that produces a magnetic field, such as a TV, audio equipment and personal computers.

CAUTION ● Do not allow the Intelligent Key, which contains electrical components, to come into contact with water or salt water. This could affect the system function. ● Do not drop the Intelligent Key. ● Do not strike the Intelligent Key sharply against another object. ● Do not change or modify the Intelligent Key.

If an Intelligent Key is lost or stolen, INFINITI recommends erasing the ID code of that Intelligent Key from the vehicle. This may prevent the unauthorized use of the Intelligent Key to operate the vehicle. For information regarding the erasing procedure, contact an INFINITI retailer. The Intelligent key function can be disabled. For information about disabling the Intelligent key function, contact an INFINITI retailer.

● Wetting may damage the Intelligent Key. If the Intelligent Key gets wet, immediately wipe until it is completely dry.

Pre-driving checks and adjustments 3-7

INTELLIGENT KEY OPERATING RANGE The Intelligent Key functions can only be used when the Intelligent Key is within the specified 1 . operating range from the request switch 䊊 When the Intelligent Key battery is discharged or strong radio waves are present near the operating location, the Intelligent Key system’s operating range becomes narrower, and the Intelligent Key may not function properly. The operating range is within 31.50 in (80 cm) 1 . from each request switch 䊊 If the Intelligent Key is too close to the door glass, handle or rear bumper the request switches may not function. When the Intelligent Key is within the operating range, it is possible for anyone who does not carry the Intelligent Key to push the request switch to lock/unlock the doors and open the trunk lid. SPA2627

SPA2407

DOOR LOCKS/UNLOCKS PRECAUTION ● Do not push the door handle request switch with the Intelligent Key held in your hand as illustrated. The close distance to the door handle will cause the Intelligent Key system to have difficulty recognizing that the Intelligent Key is outside the vehicle. ● After locking with the door handle request switch, verify the doors are securely locked by testing them. ● To prevent the Intelligent Key from being left inside the vehicle or the trunk, make sure you carry the key with you and then lock the doors or the trunk.

3-8 Pre-driving checks and adjustments

● Do not pull the door handle before pushing the door handle request switch. The door will be unlocked but will not open. Release the door handle once and pull it again to open the door. ● The Intelligent Key system (opening/closing doors with the door handle request switch) can be set to remain inactive. (See “VEHICLE INFORMATION AND SETTINGS” in the “4. Monitor, climate, audio, phone and voice recognition systems” section.) SPA2584

INTELLIGENT KEY OPERATION You can lock or unlock the doors without taking the key out from your pocket or bag.

SPA2585

When you carry the Intelligent Key with you, you can lock or unlock all doors by pushing the door handle request switch (driver’s or front passenA within the range of operation. ger’s) 䊊 When you lock or unlock the doors or the trunk lid, the hazard indicator will flash and the horn (or the outside chime) will sound as a confirmation. For details, see “Setting hazard indicator and horn mode” later in this section.

Locking doors and fuel-filler door 1. Push the ignition switch to the OFF position and make sure you carry the Intelligent Key with you.*1 2. Close all the doors.*2

Pre-driving checks and adjustments 3-9

3. Push the door handle request switch A while (driver’s or front passenger’s) 䊊 carrying the Intelligent Key with you.*3 4. All the doors and fuel-filler door will lock. 5. The hazard indicator flashes twice and the outside chime sounds twice. *1: Doors will lock with the Intelligent Key while the ignition switch is in the ACC or ON position. *2: Doors will not lock with the Intelligent Key while any door is open. *3: Doors will not lock by pushing the door handle request switch with the Intelligent Key inside the vehicle. However, when an Intelligent Key is inside the vehicle, doors can be locked with another registered Intelligent Key.

3. Push the door handle request switch again within 1 minute. 4. The hazard indicator flashes once and outside chime sounds once again. All the doors will unlock. All doors and the fuel-filler door will be locked automatically unless one of the following operations is performed within 1 minute after pushing the request switch while the doors are locked. ● Opening any door ● Pushing the ignition switch ● Inserting the Intelligent Key into the Intelligent Key port.

SPA2586

During this 1-minute time period, if the UNLOCK button on the Intelligent Key is pushed, all doors will be locked automatically after another 1 minute.

Unlocking doors and fuel-filler door 1. Push the door handle request switch (drivA once while er’s or front passenger’s) 䊊 carrying the Intelligent Key with you. 2. The hazard indicator flashes once and outside chime sounds once. The corresponding door and the fuel-filler door will unlock.

3-10 Pre-driving checks and adjustments

SPA2404

Opening trunk lid

A for 1. Push the trunk open request switch 䊊 more than 1 second. 2. The trunk will unlatch. An outside chime will sound four times. 3. Raise the trunk lid to open the trunk.

Lockout protection : To prevent the Intelligent Key from being accidentally locked in the trunk, lockout protection is equipped with the Intelligent Key system. When the trunk lid is closed with the Intelligent Key inside the trunk, the outside buzzer will sound and the trunk will open.

BATTERY SAVER SYSTEM

WARNING SIGNALS To help prevent the vehicle from moving unexpectedly by erroneous operation of the Intelligent Key listed on the following chart or to help prevent the vehicle from being stolen, chime or beep sounds inside and outside the vehicle and a warning displays in the dot matrix liquid crystal display. When a chime or beep sounds or the warning displays, be sure to check the vehicle and Intelligent Key. See “TROUBLESHOOTING GUIDE” later in this section and “DOT MATRIX LIQUID CRYSTAL DISPLAY” in the “2. Instruments and controls” section.

When all the following conditions are met for 60 minutes, the battery saver system will cut off the power supply to prevent battery discharge. ● The ignition switch is in the ACC position, and ● All doors are closed, and ● The selector lever is in the P (Park) position (Automatic Transmission models).

Pre-driving checks and adjustments 3-11

TROUBLESHOOTING GUIDE Symptom

Possible cause

Action to take

When pushing the ignition switch to stop the engine

The SHIFT P warning appears on the display and the inside warning chime The selector lever is not in the P sounds continuously (Automatic (Park) position. Transmission models).

Shift the selector lever to the P (Park) position.

When shifting the selector lever to the P (Park) position.

The inside warning chime sounds continuously.

The ignition switch is in the ACC or ON position.

Push the ignition switch to the OFF position.

When opening the driver’s door to get out of the vehicle

The inside warning chime sounds continuously.

The ignition switch is in the ACC position.

Push the ignition switch to the OFF position.

The Intelligent Key is in the Intelligent Key port.

Remove the Intelligent Key from the Intelligent Key port.

The NO KEY warning appears on the display, the outside chime sounds 3 times and the inside warning chime sounds for a few seconds.

The ignition switch is in the ACC or ON position.

Push the ignition switch to the OFF position.

The SHIFT P warning appears on the display and the outside chime sounds continuously (Automatic Transmission models).

The ignition switch is in the ACC or Move the selector lever to the P OFF position and the selector lever is (Park) position and push the ignition not in the P (Park) position. switch to the OFF position.

The outside chime sounds for a few seconds and all the doors unlock.

The Intelligent Key is inside the vehicle or trunk.

When closing the door after getting out of the vehicle

When closing the door with the inside lock knob turned to LOCK

3-12 Pre-driving checks and adjustments

Carry the Intelligent Key with you.

Symptom When pushing the request switch or button on the IntelliLOCK gent key to lock the door When closing the trunk lid

The outside chime sounds for a few seconds. The outside chime sounds for approximately 10 seconds and the trunk lid opens.

Possible cause

Action to take

The Intelligent Key is inside the vehicle or trunk.

Carry the Intelligent Key with you.

A door is not closed securely.

Close the door securely.

The Intelligent Key is inside the trunk.

Carry the Intelligent Key with you.

Pre-driving checks and adjustments 3-13

REMOTE KEYLESS ENTRY SYSTEM

WARNING The Intelligent Key transmits radio waves when the buttons are pushed. The FAA advises that the radio waves may affect aircraft navigation and communication systems. Do not operate the Intelligent Key while on an airplane. Make sure the buttons are not operated unintentionally when the unit is stored during a flight. It is possible to lock/unlock all doors, fuel-filler door, activate the panic alarm and open the windows by pushing the buttons on the Intelligent Key from outside the vehicle. Before locking the doors, make sure the Intelligent Key is not left in the vehicle. The LOCK/UNLOCK button on the Intelligent Key can operate at a distance of approximately 33 ft (10 m) from the vehicle. (The effective distance depends upon the conditions around the vehicle.) As many as 4 Intelligent Keys can be used with one vehicle. For information concerning the purchase and use of additional Intelligent Keys, contact an INFINITI retailer.

3-14 Pre-driving checks and adjustments

The lock and unlock buttons on the Intelligent Key will not operate when: ● the distance between the Intelligent Key and the vehicle is over 33 ft (10 m). ● the Intelligent Key battery is discharged. After locking with the remote keyless entry function, pull the door handle to make sure the doors are securely locked. The LOCK/UNLOCK operating range varies depending on the environment. To securely operate the lock and unlock buttons, approach the vehicle to about 3 ft (1 m) from the door.

SPA2100 1 䊊 2 䊊 3 䊊 4 䊊

LOCK button UNLOCK button TRUNK button PANIC button

HOW TO USE REMOTE KEYLESS ENTRY SYSTEM When you lock or unlock the doors or the trunk lid, the hazard indicator will flash and the horn (or the outside chime) will sound as a confirmation. For details, see “Setting hazard indicator and horn mode” later in this section.

Locking doors and fuel-filler door 1. Push the ignition switch to the OFF position and make sure you carry the Intelligent Key with you.*1 2. Close all the doors.*2 1 on the button 䊊 3. Push the LOCK Intelligent Key. 4. All the doors and fuel-filler door will lock. 5. The hazard indicator flashes twice and the horn chirps once.

*1: Doors will lock with the Intelligent Key while the ignition switch is in the ACC or ON position. *2: Doors will not lock with the Intelligent Key while any door is open. Operate the door handles to confirm that the doors have been securely locked.

Unlocking doors and fuel-filler door

2 on the 1. Push the UNLOCK button 䊊 Intelligent Key once. 2. The hazard indicator flashes once. The driver’s door and fuel-filler door will unlock. button on the 3. Push the UNLOCK Intelligent Key again within 5 seconds. 4. The hazard indicator flashes once again. All the doors will unlock.

All doors will be locked automatically unless one of the following operations is performed within 1 minute after pushing the UNLOCK button on the Intelligent Key while the doors are locked. If during this 1-minute time period, the UNLOCK button on the Intelligent Key is pushed, all doors will be locked automatically after another 1 minute. ● Opening any door ● Pushing the ignition switch ● Inserting the Intelligent Key into the Intelligent Key port. During this 1 minute time button on the period, if the UNLOCK Intelligent key is pushed, all doors will be locked automatically after another 1 minute.

Opening windows The UNLOCK button operation also allows you to open the window that is equipped with the automatic open function. This function will not operate while the window timer is activated or the windows need to be initialized. (See “POWER WINDOWS” in the “2. Instruments and controls” section.) To open the window, push the UNLOCK 2 on the Intelligent Key for about 3 button 䊊 seconds after the door is unlocked.

To stop opening, release the UNLOCK button. If the window open operation is stopped on the way while pushing the UNLOCK button, release and push the UNLOCK button again until the window opens completely. Window cannot be closed using the Intelligent Key. The door window can also be operated by turning the mechanical key in a door lock. (See “DOORS” earlier in this section.)

Opening trunk lid

3 button on the 1. Push the TRUNK 䊊 Intelligent key for more than 1 second. 2. The trunk will unlatch. 3. Raise the trunk lid to open the trunk.

Using panic alarm If you are near your vehicle and feel threatened, you may activate the alarm to call attention as follows: 4 on the 1. Push the PANIC button 䊊 key for more than 1 second. 2. The theft warning alarm and headlights will stay on for 25 seconds.

Pre-driving checks and adjustments 3-15

3. The panic alarm stops when:

Hazard indicator and horn mode:

● It has run for 25 seconds, or ● Any of the buttons on the Intelligent Key is pushed. (Note: Panic button should be pushed for more than 1 second.)

Setting hazard indicator and horn mode This vehicle is set in hazard indicator and horn mode when you first receive the vehicle. In hazard indicator and horn mode, when the 1 is pushed, the hazard button 䊊 LOCK indicator flashes twice and the horn chirps 2 is button 䊊 once. When the UNLOCK pushed, the hazard indicator flashes once. If horns are not necessary, the system can be switched to the hazard indicator mode. In hazard indicator mode, when the LOCK button is pushed, the hazard indicator button flashes twice. When the UNLOCK is pushed, neither the hazard indicator nor the horn operates.

3-16 Pre-driving checks and adjustments

DOOR LOCK

DOOR UNLOCK

TRUNK UNLOCK

Intelligent Key system (Using door handle or trunk open request switch)

HAZARD - twice OUTSIDE CHIME twice

HAZARD - once OUTSIDE CHIME once

HAZARD - none OUTSIDE CHIME 4 times

Remote keyless entry sys, or tem (Using button)

HAZARD - twice HORN - once

HAZARD - once HORN - none

HAZARD - none HORN - none

Hazard indicator mode: DOOR LOCK

DOOR UNLOCK

TRUNK UNLOCK

Intelligent Key system (Using door handle or trunk open request switch)

HAZARD - twice OUTSIDE CHIME none

HAZARD - none OUTSIDE CHIME none

HAZARD - none OUTSIDE CHIME none

Remote keyless entry sys, or tem (Using button)

HAZARD - twice HORN - none

HAZARD - none HORN - none

HAZARD - none HORN - none

HOOD Switching procedure : To switch the hazard indicator and horn (chime) 1 and UNoperation, push the LOCK 䊊 2 buttons on the Intelligent Key LOCK 䊊 simultaneously for more than 2 seconds. ● When the hazard indicator mode is set, the hazard indicator flashes 3 times. ● When the hazard indicator and horn mode is set, the hazard indicator flashes once and the horn chirps once.

SPA2318

1. Pull the hood lock release handle 䊊 located below the instrument panel; the hood will then spring up slightly. 2 up at the front of the 2. Pull the lever 䊊 hood with your fingertips and raise the hood. 3. When closing the hood, slowly close the hood down to latch both the right and left locks. Push the hood down to lock the hood securely into place. 1

WARNING ● Make sure the hood is completely closed and latched before driving. Failure to do so could cause the hood to fly open and result in an accident. ● If you see steam or smoke coming from the engine compartment, to avoid injury do not open the hood.

Pre-driving checks and adjustments 3-17

RETRACTABLE HARD TOP

CAUTION Always keep the engine running while operating the retractable hard top. Even if the engine stops, the retractable hard top will also operate when the ignition switch is in the ON position, but be sure to run the engine to prevent battery discharge. Be sure to follow the operating instructions and all of the warnings and cautions in this section.

SPA2628

Interior/exterior view 1. Retractable hard top indicators (in the dot matrix liquid crystal display) 2. Retractable hard top operating switch 3. Hard top 4. Rear parcel shelf 5. Trunk lid 6. Separator 7. Side flap

BEFORE OPERATING THE RETRACTABLE HARD TOP The retractable hard top on this vehicle is electrically operated. You can fully open or

3-18 Pre-driving checks and adjustments

close the retractable hard top only by pushing the operating switch located on the center console. The retractable hard top operating switch must be operated under all of the following conditions. ● When the vehicle is stopped ● When the engine is running ● When the separator is fixed in the position separating the roof storage area and the trunk room ● When the trunk lid is closed

Improper operation of the retractable hard top could cause a system malfunction, damage or deterioration of the retractable hard top material and related parts.

WARNING ● Park the vehicle in a safe and level location and apply the parking brake. ● Make sure the parking area is clear of obstacles and there is enough clearance over the retractable hard top (for example, in a garage or a covered area). More than approximately 6.6 ft (2 m) from the ground and more than approximately 3.3 ft (1 m) from the rear is required to open or close the retractable hard top safely. Otherwise, the top may damage any objects above it while moving. The retractable hard top operating system could also be damaged.

● Do not operate the retractable hard top in a strong wind. It could be blown by the wind, striking someone or damaging the retractable hard top. ● When the retractable hard top is retracted, do not allow anyone to stand up or extend any portion of their body out of the opening while the vehicle is in motion or while the retractable hard top is being operated. ● In an accident you could be thrown from the vehicle with an open retractable hard top if you do not use seat belts. Always use seat belts and proper child restraints. ● Do not place any objects on or near the retractable hard top operating switch. Unintentional operation of the retractable hard top may cause injuries or an accident if the objects press the switch. ● Do not put your fingers or hands in the gap between the rear seats and the rear parcel shelf or the side flaps. Doing so may cause injury if the retractable hard top is operated.

CAUTION ● Do not operate the retractable hard top when the temperature is below 32°F (0°C). This may result in damage to the retractable hard top material or operating system. ● Remove water drops, snow, ice or sand from the retractable hard top, and dry the surface of the retractable hard top completely before opening it. ● Do not open the retractable hard top when it is wet or damp. If the retractable hardtop and rear window are wet, water might get inside of the vehicle. To avoid this, wipe off any water drops before opening the retractable hard top. ● Do not place any objects between the hard rail and the structure. Doing so could interfere with retractable hard top operation and cause damage to the retractable hard top operating system or the objects. ● Do not place any objects on the upper area of the windshield glass or the hard rail when the retractable hard top is fully opened. Doing so could interfere with retractable hard top operation and cause damage.

● Do not place any object between the retractable hard top when the retractable hard top is stored in the storage space. Doing so may interfere with retractable hard top operation and cause damage. ● Do not place anything on the retractable hard top, rear parcel shelf, side flaps and trunk lid. Even small items may interfere with the retractable hard top operation and could cause damage to the retractable hard top or the vehicle body. ● Do not place anything in the retractable hard top storage area. The retractable hard top will not fit there properly, and this could damage the retractable hard top and/or the vehicle body. ● Do not sit or place excessive weight on the top, rear parcel shelf, side flaps and trunk lid, especially when the retractable hard top is being operated. The retractable hard top may be damaged. ● Do not drive the vehicle with the retractable hard top partially opened. Always make sure the retractable hard top is either fully opened or closed before driving. ● Secure items so that they cannot be blown from the vehicle while driving with the retractable hard top open.

Pre-driving checks and adjustments 3-19

● Do not install a roof rack or a roof carrier on the retractable hard top. The retractable hard top or the roof rack or both may be damaged when the retractable hard top is operated.

NOTE:

WHEN OPERATING THE RETRACTABLE HARD TOP

If the retractable hard top is opened and closed repeatedly in a short period of time, it may stop moving to protect the retractable hard top motor. Wait for approximately 20 minutes before operating the retractable hard top again.

WARNING

In case of low battery or low temperature, the retractable hard top may temporarily stop moving during the operation. This functions to protect the retractable hard top control mechanism, and it is not a malfunction.

Keep hands and other parts of the body away from moving parts such as the retractable hard top, rear parcel shelf, side flaps, trunk lid and power windows.

CAUTION Do not place any items in the storage space for the retractable hard top. A caution label is attached on the floor in the retractable hard top storage space. Cargo that contacts the retractable hard top may damage the retractable hard top or cargo.

SPA2629

Separator The retractable hard top can be operated only when the trunk room is separated. A and open the separator. 1. Pull the strap 䊊

3-20 Pre-driving checks and adjustments

B to the holders 䊊 C until 2. Hang the hooks 䊊 they latch.

SPA2630

Storing separator: 1. Pull the separator and unlatch the hooks B from the holders 䊊 C . 䊊 2. Store the separator.

SPA2631

CAUTION Do not place any items in the storage space for A is the retractable hard top. A caution label 䊊 attached on the floor in the retractable hard top storage space. Cargo that contacts the retractable hard top may damage the retractable hard top or cargo.

Pre-driving checks and adjustments 3-21

NOTE:

Automatic window lowering

When the hooks of the separator are not latched in the holders, the retractable hard top cannot be operated. “CHECK SEPARATOR” is displayed in the dot matrix liquid crystal display.

When the retractable hard top operating switch is pressed, the power windows will automatically be lowered completely. The windows do not rise automatically after the retractable hard top operation is completed. Use the power window switches to raise them.

SIC4293

INDICATORS FOR THE RETRACTABLE HARD TOP The retractable hard top indicator in the dot 1 shows the matrix liquid crystal display 䊊 conditions of retractable hard top operation. The information displays when the retractable hard top is being operated or if it is stopped before reaching the fully opened or closed position. For details about the retractable hard top indicator, see “INDICATORS FOR RETRACTABLE HARD TOP” in the “2. Instruments and controls” section.

3-22 Pre-driving checks and adjustments

4. Push the OPEN side of the retractable hard top operating switch and hold it until the retractable hard top is fully opened. ● When the OPEN side of the retractable hard top operating switch is pushed a beep sounds. ● “ROOF IN OPERATION” is displayed on the dot matrix liquid crystal display while the retractable hard top is in motion.

SPA2632

OPENING THE RETRACTABLE HARD TOP 1. Make sure the trunk lid is securely closed before operating the retractable hard top. 2. Apply the parking brake and move the selector lever to the P (Park) position (for the automatic transmission models) or the shift lever to the N (Neutral) position (for the manual transmission models). 3. Start the engine.

CAUTION Be sure to fully open or fully close the retractable hard top and do not stop using the operating switch half way through the roof opening or closing process. If the retractable hard top is only partially opened, significant damage to the retractable hard top could occur.

● The windows will automatically be fully opened. 5. Release the switch when the retractable hard top is fully opened. ● When the retractable hard top is fully opened, a beep sounds. ● “ROOF OPEN” is displayed on the dot matrix liquid crystal display when the retractable hard top is fully opened.

Pre-driving checks and adjustments 3-23

SPA2633

CLOSING THE RETRACTABLE HARD TOP 1. Make sure the trunk lid is securely closed before operating the retractable hard top. 2. Apply the parking brake and move the selector lever to the P (Park) position (for the automatic transmission models) or the shift lever to the N (Neutral) position (for the manual transmission models). 3. Start the engine.

4. Push the CLOSE side of the retractable hard top operating switch and hold it until the retractable hard top is fully closed.

● The separator is fixed in the position separating the roof storage area and the trunk room

● When the CLOSE side of the retractable hard top operating switch is pushed a beep sounds.

● Make sure that no objects interfere with the rear parcel shelf, the side flaps and the retractable hard top.

● “ROOF IN OPERATION” is displayed on the dot matrix liquid crystal display while the retractable hard top is in motion.

● The trunk lid is closed

● The windows will automatically be fully opened. 5. Release the switch when the retractable hard top is fully closed. ● When the retractable hard top is fully closed, a beep sounds. ● “ROOF CLOSED” is displayed on the dot matrix liquid crystal display when the retractable hard top is fully closed.

IF THE RETRACTABLE HARD TOP DOES NOT OPEN OR CLOSE ELECTRICALLY If you cannot operate the retractable hard top with the operating switch, first check whether all the following operating conditions are satisfied. ● The vehicle is stopped ● The engine is running

3-24 Pre-driving checks and adjustments

If the retractable hard top still does not move under the above conditions or has any system malfunction, see an INFINITI retailer as soon as possible.

WARNING ● Do not drive with the retractable hard top partially opened. ● When the buzzer continuously sounds while the vehicle is being driven, immediately park the car in a safe location and check that the retractable hard top is not partially open ● If the retractable hard top cannot be operated properly, see an INFINITI retailer as soon as possible to have your vehicle checked.

INITIALIZING OF THE RETRACTABLE HARD TOP After replacing the battery or when repeating open and close operations without fully opening or closing the retractable hard top, the retractable hard top may not operate normally. If this situation occurs, perform initialization of the retractable hard top according to the following procedures. 1. Start the engine. SPA2585

OPERATING THE RETRACTABLE HARD TOP USING THE INTELLIGENT KEY The retractable hard top can be opened using the request switch. This operation cannot close the retractable hard top.

Opening the retractable hard top Carry the Intelligent Key with you. Push the door handle request switch (driver’s or passenger’s) A and hold it until the retractable hard top is 䊊 fully open.

2. Push the OPEN side of the retractable hard top operating switch and hold it. 3. Release the OPEN side of the retractable hard top operating switch when the beep sounds once. The initialization of the retractable hard top is complete. If the beep sounds twice when releasing the OPEN side of the retractable hard top operating switch during the initialization, repeat the procedures from step 2.

NOTE: The following functions do not operate normally when the initialization of the retractable hard top is not complete. – The retractable hard top does not open or close when pushing the OPEN side of the retractable hard top operating switch. (Only the rear parcel shelf operates.) – The retractable hard top indicator does not appear on the dot matrix liquid crystal display. – The air conditioner airflow is fixed at the level when the retractable hard top is being closed. – The audio volume is fixed at the level when the retractable hard top is being closed. – For the models with the navigation system, the Voice Recognition function (VR) is not operative.

CAUTION After the initialization, if the retractable hard top does not operate normally, immediately contact INFINITI retailer for an inspection.

Pre-driving checks and adjustments 3-25

TROUBLESHOOTING GUIDE If the retractable hard top stops halfway during operation or does not operate normally, follow the procedures shown in the following table. If the procedures in the following table do not solve the symptom, immediately contact INFINITI retailer for the inspection. Symptom

The OPEN side of the retractable hard top operating switch is pushed, but the retractable hard top does not operate.

Beep

Possible cause

Possible solution

Sounds twice

The OPEN side of the retractable hard top operating switch is pushed while the retractable hard top is fully open, or the CLOSE side of the retractable hard top operating switch is pushed while the retractable hard top is fully closed.

Push the CLOSE side of the retractable hard top operating switch when the retractable hard top is fully open. Push the OPEN side of the retractable hard top operating switch when the retractable hard top is fully closed.

Sounds twice

The selector lever (automatic transmission models only) or the shift lever (manual transmission models only) is in the R (Reverse) position.

Shift the selector lever (automatic transmission models only) to the P (Park) or N (Neutral) position, or shift the shift lever (manual transmission model only) to the N (Neutral) position, and then operate the retractable hard top.

Sounds twice

The trunk lid is opened.

Fully close the trunk lid.

Does not sound The battery voltage is low. Sounds twice

The separator in the trunk room is not correctly set.

Does not sound The retractable hard top is in the deactivation mode in order to avoid motor overheating by the continuous operation of the retractable hard top.

3-26 Pre-driving checks and adjustments

Start the engine again and operate the retractable hard top. Set the separator correctly. For details, refer to “Separator” earlier in this section. Wait for approximately 20 minutes without operating the retractable hard top and then operate the retractable hard top.

Symptom

The retractable hard top stops halfway during operation.

Beep

Sounds twice

Possible cause

Does not sound The battery voltage is low. Sounds twice every 10 seconds for 15 minutes.

The retractable hard top control does not recognize the rear parcel shelf position because of battery replacement or the contentious operation of the retractable hard top.

When the vehicle is being driven, the beep sounds.

Sounds continuously

The retractable hard top is partially opened.

When the engine is stopped, the beep sounds.

Sounds twice

The retractable hard top is partially opened.

Only the rear parcel shelf operates when the OPEN side of the retractable hard top operating switch is pushed.

Possible solution

Check that an object is not trapped inside the rear parcel shelf, side flap and retractable hard Objects are trapped in the moving structure of top. After the check, turn the ignition switch to the retractable hard top. the OFF position, start the engine again and then operate the retractable hard top. Start the engine again and operate the retractable hard top. Perform the initialization of the retractable hard top and operate the retractable hard top again. For the initialization details, please refer to “INITIALIZING OF THE RETRACTABLE HARD TOP” in the “3. Pre-driving checks and adjustments” section. Immediately park the vehicle in a safe location and fully open or fully close the retractable hard top. Fully open or fully close the retractable hard top.

Pre-driving checks and adjustments 3-27

TRUNK LID

WARNING ● Do not drive with the trunk lid open. This could allow dangerous exhaust gases to be drawn into the vehicle. See “EXHAUST GAS (carbon monoxide)” in the “5. Starting and driving” section of this manual. ● Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where they could be seriously injured. Keep the car locked, with the trunk closed, when not in use, and prevent children’s access to Intelligent Keys.

CAUTION The mechanisms that operate the retractable hard top are installed in the trunk lid. For this reason, the trunk lid is heavier than those on most vehicles. Opening and closing the trunk may take more effort than conventional trunk lids. The additional effort is normal for this vehicle.

SPA2307

TRUNK LID RELEASE SWITCH The trunk lid release switch 䊊 is located on the instrument panel. A

To open the trunk lid, push the release switch down as illustrated. To close, push the trunk lid down. You can open the trunk lid with Intelligent Key. (See “INTELLIGENT KEY SYSTEM” page 3-6 or “REMOTE KEYLESS ENTRY SYSTEM” earlier in this section.)

SPA2404

TRUNK OPEN REQUEST SWITCH The trunk lid can be opened by pushing the A when the Intellitrunk open request switch 䊊 gent Key is within the operating range of the trunk lock/unlock function regardless of the inside lock knob position. (See “INTELLIGENT KEY SYSTEM” earlier in this section.)

AUTO CLOSURE If the trunk lid is pulled down to a partly open position, the trunk lid will pull itself to the closed position. Do not apply excessive force when the auto closure is operating. Excessive force applied may cause the mechanism to malfunction.

3-28 Pre-driving checks and adjustments

When you have to leave the vehicle with a valet and want to keep your belongings safe in the glove box and the trunk, push this switch to OFF and lock the glove box with the mechanical key. Then leave the vehicle and the Intelligent Key with the valet and keep the mechanical key with you.

CAUTION ● The trunk lid will automatically close from a partly open position. To avoid pinching, keep hands and fingers away from trunk lid opening. ● Do not let children operate the trunk lid.

See “KEYS” earlier in this section. To connect the power to the trunk lid, push the B position. switch to the ON 䊊 SPA2308

TRUNK RELEASE POWER CANCEL SWITCH When the switch located inside the glove box is A , the power to the trunk in the OFF position 䊊 lid will be canceled and the trunk lid cannot be opened by the trunk lid release switch, the trunk open request switch with the Intelligent Key carried with you or the TRUNK button on the Intelligent Key.

Pre-driving checks and adjustments 3-29

FUEL-FILLER DOOR Releasing inside the trunk To open the trunk lid from the inside, pull the 1 until the lock releases and release handle 䊊 push up on the trunk lid. The release lever is made of a material that glows in the dark after a brief exposure to ambient light. The handle is located on the back of the trunk lid as illustrated.

SPA2634

INTERIOR TRUNK LID RELEASE WARNING Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where they could be seriously injured. Keep the car locked, with the trunk lid securely latched, when not in use, and prevent children’s access to Intelligent Keys. The interior trunk lid release mechanism allows opening of the trunk lid in the event that people become locked inside the trunk or in the event of the loss of electrical power such as a discharged battery.

3-30 Pre-driving checks and adjustments

SPA1562A

OPENING THE FUEL-FILLER DOOR To open the fuel-filler door, unlock the fuel-filler door by using one of the following operations, then push the left side of the door. ● Push the door handle request switch with the Intelligent Key carried with you. ● Push the UNLOCK button on the Intelligent Key. ● Insert the mechanical key into the door lock cylinder and turn it to the rear of the vehicle. ● Push the power door lock switch to the UNLOCK position.

To lock, close the fuel-filler door securely and lock all doors by operating the door handle request switch, the LOCK button on the Intelligent Key, the mechanical key or the power door lock switch.

FUEL-FILLER CAP WARNING

● Never pour fuel into the throttle body to attempt to start your vehicle. ● Do not fill a portable fuel container in the vehicle or trailer. Static electricity can cause an explosion of flammable liquid, vapor or gas in any vehicle or trailer. To reduce the risk of serious injury or death when filling portable fuel containers:

● Gasoline is extremely flammable and highly explosive under certain conditions. You could be burned or seriously injured if it is misused or mishandled. Always stop engine and do not smoke or allow open flames or sparks near the vehicle when refueling.

– Always place the container on the ground when filling.

● Do not attempt to top off the fuel tank after the fuel pump nozzle shuts off automatically. Continued refueling may cause fuel overflow, resulting in fuel spray and possibly a fire.

– Use only approved portable fuel containers for flammable liquid.

● Use only an original equipment type fuelfiller cap as a replacement. It has a built-in safety valve needed for proper operation of the fuel system and emission control system. An incorrect cap can result in a serious malfunction and possible injury. It could also cause the malfunction indicator light to come on.

● If fuel is spilled on the vehicle body, flush it away with water to avoid paint damage.

– Do not use electronic devices when filling. – Keep the pump nozzle in contact with the container while you are filling it.

CAUTION

● Insert the cap straight into the fuel-filler tube, then tighten until a single click is heard. Failure to tighten the fuel-filler cap properly may cause the malfunction indicator light (MIL) to illuminate. If the light illuminates because the fuelfiller cap is loose or missing, tighten or install the cap and continue to drive the vehicle. The light should turn off after a few driving trips. If the light does not turn off after a few driving trips, have the vehicle inspected by an INFINITI retailer. ● The LOOSE FUEL CAP warning will appear if the fuel-filler cap is not properly tightened. Failure to tighten the fuel-filler cap properly after the LOOSE FUEL CAP warning appears Malfunction Indicator may cause the Light (MIL) to illuminate.

Pre-driving checks and adjustments 3-31

A on the right side 3. Push the reset switch 䊊 of the combination meter panel for about 1 second to turn off the LOOSE FUEL CAP warning after tightening the fuel cap.

SPA2838

SPA2811

To remove the fuel-filler cap: 1. Turn the fuel-filler cap counterclockwise to remove. A 2. Put the fuel-filler cap on the cap holder 䊊 while refueling.

LOOSE FUEL CAP warning

To install the fuel-filler cap: 1. Insert the fuel-filler cap straight into the fuel-filler tube. 2. Turn the fuel-filler cap clockwise until a single click is heard.

To turn off the warning, perform the following procedure: 1. Remove and install the fuel-filler cap as soon as possible. (See “FUEL-FILLER CAP” earlier in this section.) 2. Tighten the fuel-filler cap until a single click is heard.

3-32 Pre-driving checks and adjustments

The LOOSE FUEL CAP warning appears on the dot matrix liquid crystal display when the fuelfiller cap is not tightened correctly after the vehicle has been refueled.

TILT/TELESCOPIC STEERING

WARNING ● Do not adjust the steering wheel while driving. You could lose control of your vehicle and cause an accident. ● Do not adjust the steering wheel any closer to you than is necessary for proper steering operation and comfort. The driver’s air bag inflates with great force. If you are unrestrained, leaning forward, sitting sideways or out of position in any way, you are at greater risk of injury or death in a crash. You may also receive serious or fatal injuries from the air bag if you are up against it when it inflates. Always sit back against the seatback and as far away as practical from the steering wheel. Always use the seat belts.

SPA2328

SPA2312

MANUAL OPERATION (if so equipped)

ELECTRIC OPERATION (if so equipped)

Tilt or telescopic operation

Tilt or telescopic operation

Pull the lock lever 䊊 down and adjust the steering wheel up, down, forward or rearward to the desired position.

Move the lever to adjust the steering wheel up or down, forward or rearward to the desired position.

Push the lock lever up securely to lock the steering wheel in place.

For more information, see “AUTOMATIC DRIVE POSITIONER” later in this section.

1

Pre-driving checks and adjustments 3-33

SUN VISORS

MIRRORS

SPA2447

SPA2587

1. To block out glare from the front, swing 1 . down the main sun visor 䊊 2. To block glare from the side, remove the main sun visor from the center mount and 2 . swing it to the side 䊊

3-34 Pre-driving checks and adjustments

SPA2450

INSIDE MIRROR

Automatic anti-glare type

Adjust the height and the angle of the inside mirror to the desired position.

The inside mirror is designed so that it automatically changes reflection according to the intensity of the headlights of the following vehicle. The anti-glare system will be automatically turned on when the ignition switch is pushed to the ON position. When the anti-glare system is turned on, the A will illuminate and excessive indicator light 䊊 glare from the headlights of the vehicle behind you will be reduced.

C to make the inside Push the “䡩” switch 䊊 rearview mirror operate normally. The indicator D to turn light will turn off. Push the “I” switch 䊊 the system on.

Adjusting outside mirrors The outside mirror control switch is located on the armrest.

E Do not allow any object to cover the sensors 䊊 or apply glass cleaner on them. Doing so will reduce the sensitivity of the sensor, resulting in improper operation.

The outside mirror will operate only when the ignition switch is in the ACC or ON position. Turn the switch right or left to select the right or 1 , then adjust using the conleft side mirror 䊊 2 . trol switch 䊊

For the HomeLink姞 Universal Transceiver (if so equipped) operation, see “HomeLink姞 UNIVERSAL TRANSCEIVER” in the “2. Instruments and controls” section.

Defrosting outside mirrors SPA2309

The outside mirrors will be heated when the rear window defroster switch is operated.

OUTSIDE MIRRORS WARNING Objects viewed in the outside mirror on the passenger side are closer than they appear. Be careful when moving to the right. Using only this mirror could cause an accident. Use the inside mirror or glance over your shoulder to properly judge distances to other objects.

Pre-driving checks and adjustments 3-35

AUTOMATIC DRIVE POSITIONER (if so equipped) The automatic drive positioner system has two features: ● Seat synchronization function ● Memory storage

SPA2310

SIC2064

Foldable outside mirrors

VANITY MIRROR

The outside mirror remote control operates when the ignition switch is in the ACC or ON position.

To use the front vanity mirror, pull down the sun visor and pull up the cover.

The outside mirrors automatically fold when the outside mirror folding switch is pushed in. To unfold, push the switch again.

CAUTION Continuously performing the fold/unfold operation of the outside mirror may cause the switch to stop the operation.

3-36 Pre-driving checks and adjustments

The seat synchronization function operates under the following conditions:

Cancel or activate seat synchronization function

● The ignition switch is in the ON position.

For Automatic Transmission models:

● The selector lever is in the P (Park) position (Automatic Transmission models) or the parking brake is applied (Manual Transmission models).

SPA2659

SEAT SYNCHRONIZATION FUNCTION The seat synchronization function automatically adjusts the positions of the steering wheel and outside mirrors when the seat is adjusted using the power seat switches. However, the steering wheel and outside mirrors will not move if the seat is adjusted over the maximum thresholds. The system considers that the steering wheel and outside mirror adjustments are not necessary because the seat may not be adjusted for the driving position. Note that the function is set to disabled as the factory default setting.

The selector lever must be in the P (Park) position with the ignition switch in the ACC position.

● The seatback is raised.

For Manual Transmission models:

If the outside mirrors or the steering wheel reaches its maximum adjustment, the function is automatically disabled. Restart the function by selecting a previously stored seat memory position using the memory switches (1 or 2). An Intelligent Key that was previously linked to the stored seat memory can also be used to restart the function.

The parking brake must be applied with the ignition switch in the ACC position.

If a seat position was not previously stored in the seat memory, restart the function by adjusting the steering wheel and outside mirrors manually for your best driving position and then drive the vehicle above 4 MPH (7 km/h).

The seat synchronization function can be activated or canceled by pushing and holding the SET switch for more than 10 seconds while the ignition switch is in the ACC position. The indicator lights on the memory switches (1 and 2) will blink once when the function is canceled, and the indicator lights will blink twice when the function is activated. Note that the indicator lights may illuminate after 5 seconds while holding the SET switch. This indicates readiness for linking the Intelligent Key to a stored memory position. Keep the SET switch pushed for more than 10 seconds to turn on or off the seat synchronization function.

Pre-driving checks and adjustments 3-37

MEMORY STORAGE Two positions for the driver’s seat, steering column and outside mirrors can be stored in the automatic drive positioner memory. Follow these procedures to use the memory system. 1. Automatic transmission models: Move the selector lever to the P (Park) position. Manual transmission models: Apply the parking brake. 2. Raise the seatback. 3. Push the ignition switch to the ON position. 4. Adjust the driver’s seat, steering column and outside mirrors to the desired positions by manually operating each adjusting switch. For additional information, see “SEATS” in the “1. Safety — Seats, seat belts and supplemental restraint system” section and “TILT/TELESCOPIC STEERING” page 3-33 and “OUTSIDE MIRRORS” earlier in this section.

3-38 Pre-driving checks and adjustments

5. Push the SET switch and, within 5 seconds, push the memory switch (1 or 2) fully for at least 1 second. The indicator light for the pushed memory switch will stay on for approximately 5 seconds after pushing the switch. If memory is stored in the same memory switch, the previous memory will be deleted.

Linking Intelligent Key to a stored memory position The Intelligent Key can be linked to a stored memory position with the following procedure. 1. Follow the steps for storing a memory position. 2. While the indicator light for the memory switch being set is illuminated for 5 secbutton on the Intelonds, push the ligent Key. If the indicator light blinks, the Intelligent Key is linked to that memory setting. Push the ignition switch to the OFF position, button on the Intelliand then push the gent Key. The driver’s seat, steering wheel and outside mirrors will move to the memorized position.

Confirming memory storage ● Push the ignition switch to the ON position and push the SET switch. If the main memory has not been stored, the indicator light will come on for approximately 0.5 second. When the memory has stored in position, the indicator light will stay on for approximately 5 seconds. ● If the battery cable is disconnected, or if the fuse opens, the memory will be canceled. In this case, reset the desired position using the previous procedure. ● If optional Intelligent Keys are added to your vehicle, the memory storage procedure to switch 1 or 2 and linking Intelligent Key procedure to a stored memory position should be performed again for each Intelligent Key. For additional Intelligent Key information, see “KEYS” earlier in this section.

Selecting the memorized position

SYSTEM OPERATION

1. Automatic transmission models:

The automatic drive positioner system will not work or will stop operating under the following conditions:

Move the selector lever to the P (Park) position. Manual transmission models: Apply the parking brake. 2. Raise the seatback. 3. Use one of the following methods to move the driver’s seat, the outside mirrors and the steering wheel.

● When the vehicle speed is above 4 MPH (7 km/h). ● When the adjusting switch for the driver’s seat and steering column is turned on while the automatic drive positioner is operating. ● When the memory switch 1 or 2 is not pushed for at least 1 second.

● When the driver’s door remains open for more than 45 seconds and the ignition switch is not in the ON position. ● When the seatback is folded. ● While the walk-in function operates. ● The seat synchronization function is automatically disabled if the outside mirrors or steering wheel reaches its maximum adjustment. ● The seat synchronization function will not move if the seat is adjusted over one of the following maximum thresholds:

● Push the ignition switch to the ON position and push the memory switch (1 or 2) fully for at least 1 second.

● When the seat, steering column and outside mirrors have already been moved to the memorized position.

– Seat sliding: 3.0 in (76 mm)

● Within 45 seconds of opening the driver’s door, push the memory switch (1 or 2) fully for at least 1 second.

● When no position is stored in the memory switch.

– Seat lifter (rear side): 0.8 in (20 mm)

The driver’s seat, steering column and outside mirrors will move to the memorized position with the indicator light flashing, and then the light will stay on for approximately 5 seconds. For manual transmission models, the memory positions can be selected even when the engine is running. In this case, move the shift lever to the N (Neutral) position and apply the parking brake. Then, perform step 2.

– Seatback reclining: 9.1 degrees

● When the parking brake is released (MT models). ● When the speed is above 4 MPH (7 km/h) while the parking brake is applied (MT models). To restart the drive positioner system, move the parking brake to off and on. ● When the engine is started while moving the automatic drive positioner.

Pre-driving checks and adjustments 3-39

4 Monitor, climate, audio, phone and voice recognition systems Safety note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Center multi-function control panel . . . . . . . . . . . . . . . . . 4-2 How to use INFINITI controller . . . . . . . . . . . . . . . . . . . 4-4 How to use touch screen (models with navigation system). . . . . . . . . . . . . . . . . 4-4 Menu options (models with navigation system). . . . . . . . . . . . . . . . . 4-6 How to select menus on the screen . . . . . . . . . . . . . . 4-7 Vehicle information and settings. . . . . . . . . . . . . . . . . . . . 4-7 How to use STATUS button . . . . . . . . . . . . . . . . . . . . . . 4-7 How to use brightness control and display ON/OFF button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7 How to use INFO button . . . . . . . . . . . . . . . . . . . . . . . . 4-8 How to use SETTING button . . . . . . . . . . . . . . . . . . . . 4-12 Rearview monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22 How to read displayed lines. . . . . . . . . . . . . . . . . . . . 4-23 How to park with predicted course lines. . . . . . . . . 4-23 Difference between predicted and actual distances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25 How to adjust screen . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27 Operating tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27 Ventilators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28 Automatic climate control . . . . . . . . . . . . . . . . . . . . . . . . . 4-29 Automatic climate control (Type A) . . . . . . . . . . . . . . 4-30

Automatic climate control (Type B) . . . . . . . . . . . . . . 4-33 Operating tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-36 In-cabin microfilter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-36 Servicing climate control . . . . . . . . . . . . . . . . . . . . . . . 4-36 Audio system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-37 Audio operation precautions . . . . . . . . . . . . . . . . . . . 4-37 FM-AM-SAT radio with Compact Disc (CD) player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-53 DVD (Digital Versatile Disc) player operation (models with navigation system) . . . . . . 4-58 Usb input operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-62 Bluetooth姞 streaming audio (models with navigation system). . . . . . . . . . . . . . . . 4-66 iPod姞 player operation. . . . . . . . . . . . . . . . . . . . . . . . . 4-71 Music box姞 (if so equipped). . . . . . . . . . . . . . . . . . . . 4-73 Cd/dvd/usb memory care and cleaning . . . . . . . . . 4-81 Steering-wheel-mounted controls for audio . . . . . . 4-82 Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-84 Car phone or CB radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-85 Bluetooth姞 Hands-Free Phone System (models with navigation system). . . . . . . . . . . . . . . . . . . 4-85 Regulatory information. . . . . . . . . . . . . . . . . . . . . . . . . 4-87 Voice commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-87 Control buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-87 Connecting procedure . . . . . . . . . . . . . . . . . . . . . . . . . 4-88

Phone selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-88 Vehicle phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-88 Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-91 Receiving a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-92 During a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-93 Phone setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-93 Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . 4-95 Bluetooth姞 Hands-Free Phone System (models without navigation system). . . . . . . . . . . . . . . . 4-96 Regulatory information. . . . . . . . . . . . . . . . . . . . . . . . . 4-97 Control buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-98 Voice recognition system . . . . . . . . . . . . . . . . . . . . . . 4-98 Pairing procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-102 Phonebook registration . . . . . . . . . . . . . . . . . . . . . . . 4-103

Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-103 Receiving a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-104 During a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-104 Phone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-105 Voice adaptation mode . . . . . . . . . . . . . . . . . . . . . . . 4-108 INFINITI Voice Recognition system (models with navigation system). . . . . . . . . . . . . . . . . . 4-109 INFINITI Voice Recognition standard mode . . . . . . 4-109 Using the system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-112 INFINITI Voice Recognition alternate command mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-122 Using the system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-128 Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . 4-134

SAFETY NOTE

CENTER MULTI-FUNCTION CONTROL PANEL

WARNING ● Do not disassemble or modify this system. If you do, it may result in accidents, fire, or electric shock. ● Do not use this system if you notice any abnormality, such as a frozen screen or lack of sound. Continued use of the system may result in accident, fire or electric shock. ● In case you notice any foreign object in the system hardware, spill liquid on it, or notice smoke or smell coming from it, stop using the system immediately and contact your nearest INFINITI retailer. Ignoring such conditions may lead to accidents, fire, or electric shock.

SAA1523

Models with navigation system

● Park the vehicle in a safe location and apply the parking brake to view the images on the front center display screen.

1. “STATUS ” status display button (P. 4-7)

Do not attempt to operate the system in extreme temperature conditions [below ⫺4°F (⫺20°C) and above 158°F (70°C)]. Operating this system under these conditions may result in system malfunctions.

3. INFINITI controller (P. 4-4)

2, 6, 7, 10, 11. For navigation system control buttons (Refer to the separate Navigation System Owner’s Manual.) 4. “PHONE ” Bluetooth姞 Hands-Free Phone System button (P. 4-85) OFF ” brightness control and dis5. “ play ON/OFF button (P. 4-7)

4-2 Monitor, climate, audio, phone and voice recognition systems

8. “AM·FM·SAT ” band selector button (P. 4-37) 9. “DISC·AUX ” selector button (P. 4-37) 12. “INFO ” vehicle and navigation information button (P. 4-8) 13. “SETTING ” button (P. 4-12)

SAA1541

SAA1524

Models without navigation system 1. “AUX ” button (P. 4-37) 2. “RADIO AM·FM ” band selector button (P. 4-37) 3. INFINITI controller (P. 4-4) OFF ” brightness control and dis4. “ play ON/OFF button (P. 4-7) 5. “INFO ” vehicle information button (P. 4-8) 6. “DISC ” selector button (P. 4-37) 7. “STATUS ” status display button (P. 4-7) 8. “SETTING ” button (P. 4-12) When you use this system, make sure the engine is running.

Models with navigation system

If you use the system with the engine not running (ignition ON or ACC) for a long time, it will use up all the battery power, and the engine will not start.

SAA1508

Models without navigation system

Monitor, climate, audio, phone and voice recognition systems 4-3

HOW TO USE INFINITI CONTROLLER Choose an item on the display using the main 2 (or additional directional directional buttons 䊊 6 with navigation system) or center buttons 䊊 3 , and push the ENTER button 䊊 1 for dial 䊊 operation. 4 before the If you push the BACK button 䊊 setup is completed, the setup will be canceled and/or the display will return to the previous screen. This button can also be used to delete characters that have been input.

After the setup is completed, push the BACK 4 and return to the previous screen. button 䊊

For the VOICE button 䊊 functions, refer to the separate Navigation System Owner’s Manual. 5

HOW TO USE TOUCH SCREEN (models with navigation system) CAUTION ● The glass screen on the liquid crystal display may break if it is hit with a hard or sharp object. If the glass screen breaks, do not touch it. Doing so could result in an injury.

● To clean the display, use a soft, dry cloth. If additional cleaning is necessary, use a small amount of neutral detergent with a soft cloth. Never use a rough cloth, alcohol, benzine, thinner or any kind of solvent or paper towel with a chemical cleaning agent. They will scratch or deteriorate the panel. ● Do not splash any liquid such as water or car fragrance on the display. Contact with liquid will cause the system to malfunction. To ensure safe driving, some functions cannot be operated while driving. The on-screen functions that are not available while driving will be “grayed out” or muted. Park the vehicle in a safe location and then operate the navigation system.

SAA2473

Touch screen operation With this system, the same operations as those for the INFINITI controller are possible using the touch screen operation. Selecting the item :

WARNING ● ALWAYS give your full attention to driving. ● Avoid using vehicle features that could distract you. If distracted, you could lose control of your vehicle and cause an accident.

4-4 Monitor, climate, audio, phone and voice recognition systems

Touch an item to select it. To select the “Audio” 1 on the settings, touch the “Audio” area 䊊 screen. 2 button to return to the Touch the BACK 䊊 previous screen.

● Space: Inserts a space. ● Delete: Deletes the last character that has been input with one touch. Push and hold the button to delete all of the characters. ● OK: Completes character inputs.

Touch screen maintenance SAA2474

SAA2475

Adjusting an item :

Inputting characters :

1 or ⫺ 䊊 2 button to adjust the Touch the + 䊊 settings.

1 . Touch the letter or number 䊊

3 or 4 button to Touch the 䊊 䊊 move to the previous or next item. 5 or 6 button to Touch the 䊊 䊊 move to the previous or next page.

There are some options available when inputting characters.

If you clean the display screen, use a dry, soft cloth. If additional cleaning is necessary, use a small amount of neutral detergent with a soft cloth. Never spray the screen with water or detergent. Dampen the cloth first, and then wipe the screen.

● Uppercase: Shows uppercase characters. ● Lowercase: Shows lowercase characters. ● Symbols: Shows symbols such as the question mark (?).

Monitor, climate, audio, phone and voice recognition systems 4-5

SAA1525

MENU OPTIONS (models with navigation system) The start menu can be displayed using the menu control switch on the steering-wheelmounted controls. 1. While the MAP or STATUS screen is displayed, push and hold the menu control switch until the “Menu Options” screen appears. 2. Highlight the preferred item by tilting the menu control switch up or down, and then push the menu control switch to select it.

SAA2477

SAA2476

Available items

With navigation system

Destination/Route : These items are for the navigation system. See the separate Navigation System Owner’s Manual for details. Info : Displays the information screen. It is the same screen that appears when you push the INFO button. Settings : Displays the settings screen. It is the same screen that appears when you push the SETTING button.

SAA1510

Without navigation system

4-6 Monitor, climate, audio, phone and voice recognition systems

VEHICLE INFORMATION AND SETTINGS HOW TO SELECT MENUS ON THE SCREEN Vehicle functions are viewed on the display screen in menus. To select each key item, highlight the preferred item using the INFINITI controller and push the ENTER button. Whenever a menu selection is made or menu item is highlighted, different areas on the screen provide you with important information. See the following for details. 1. Header: Shows the path used to get to the current screen. 2. Menu Selections: Shows the options to choose within that menu screen. 3. UP/DOWN Movement indicator: Shows that the INFINITI controller may be used to move UP/DOWN on the screen and select more options. 4. Menu Items Counter:

5. Footer/Information Line: Provides more information (if available) about the menu selection currently highlighted.

HOW TO USE STATUS BUTTON To display the status of the audio, Climate control system, fuel consumption and navigation system (if so equipped), push the STATUS button. The following information will appear when the STATUS button is pushed repeatedly. Audio and Climate control system → Audio and fuel economy → Audio and Navigation system (if so equipped)

HOW TO USE BRIGHTNESS CONTROL AND DISPLAY ON/OFF BUTTON Push the “ OFF” button to switch the display brightness to the daytime mode or the nighttime mode, and to adjust the display brightness using the INFINITI controller while the indicator is displayed at the bottom of the screen. The display brightness can also be adjusted using the brightness UP button (+) or brightness DOWN button (⫺) (models with navigation system). OFF” button for more Push and hold the “ than 2 seconds to turn the display off. Push the button again to turn the display on.

Shows the total number of items listed across all pages for the current menu.

Monitor, climate, audio, phone and voice recognition systems 4-7

HOW TO USE INFO BUTTON

Vehicle information display

The display screen shows vehicle and navigation (if so equipped) information for your convenience.

1. Push the INFO button on the control panel. 2. Select an item from the INFO menu. 3. After viewing or adjusting the information on the following screens, push the BACK button to return to the INFO menu.

The information shown on the screen should be a guide to determine the condition of the vehicle. See the following for details.

See the separate Navigation System Owner’s Manual for the following items: ● Where am I? SAA2478

● Traffic Info ● Weather Info

Models with navigation system

● Map Update ● Navigation Version

SAA1511

Models without navigation system

4-8 Monitor, climate, audio, phone and voice recognition systems

Fuel Economy information The distance to empty, average fuel economy and current fuel economy will be displayed for reference. To reset the average fuel economy (Avg Fuel Econ), select the “Reset Fuel Eco” or “Reset” key. If the “Fuel Eco History” or “View” key is selected, the average fuel consumption history will be displayed in graph form along with the average for the previous Reset-to-Reset period. SAA2479

SAA2720

The unit can be converted between “US” and “Metric”. (See “HOW TO USE SETTING BUTTON” later in this section.) The fuel economy information may differ from the information displayed on the vehicle information display. This is due to the timing difference in updating the information and does not indicate a malfunction.

SAA2480

Models with navigation system

SAA2721

Models without navigation system

Monitor, climate, audio, phone and voice recognition systems 4-9

Maintenance information The maintenance intervals can be displayed for the engine oil, oil filter, tire and other reminders. To set a maintenance interval, select a preferred item from the list. You can also set to display a message to remind you that the maintenance needs to be performed.

Models with navigation system

SAA2481

SAA2830

SAA2482

SAA2722

Models without navigation system

4-10 Monitor, climate, audio, phone and voice recognition systems

The following example shows how to set the engine oil maintenance information. Use the same steps to set the other maintenance information. 1. Set the interval (mileage) of the maintenance schedule. To determine the recommended maintenance interval, refer to your “INFINITI Service and Maintenance Guide”. 2. To display the reminder automatically when the desired distance is reached, select the “Reminder” key. 3. Reset the driving distance to the new maintenance schedule. 4. To return to the previous screen, push the BACK button. The unit can be converted between “US” and “Metric”. (See “HOW TO USE SETTING BUTTON” later in this section.)

● Increase the “Interval” distance to be more than the current distance being tracked.

SAA3003

Example The Reminder will be automatically displayed when the specified distance has been driven and every time the ignition switch is pushed to the ACC or ON position. The reminder will not appear while driving. Select the “OK” key to hide the reminder for the rest of the current drive. To stop the reminder from appearing, perform one of the following actions: ● Select the “Reset Distance”. ● Deactivate the “Reminder”.

SAA2483

Others information (models with navigation system) The Others information display will appear when pushing the INFO button and selecting the “Others” key. GPS Position : For the details of this item, see the separate Navigation System Owner’s Manual. Voice Recognition : For the details of this item, see “INFINITI VOICE RECOGNITION SYSTEM (models with navigation system)” later in this section.

Monitor, climate, audio, phone and voice recognition systems 4-11

HOW TO USE SETTING BUTTON The display as illustrated will appear when the SETTING button is pushed. For navigation settings, refer to the separate Navigation System Owner’s Manual.

SAA2484

Models with navigation system

SAA2975

Models with navigation system

SAA2604

Models without navigation system

4-12 Monitor, climate, audio, phone and voice recognition systems

SAA2740

Models without navigation system

Audio settings

BOSE姞 AudioPilot姞 (if so equipped) :

The display as illustrated will appear when pushing the SETTING button and selecting the “Audio” key.

When this item is turned to ON, AudioPilot姞 monitors noise in the passenger compartment with a microphone and compensates for any unpleasant noise.

Bass/Treble/Balance/Fade : To adjust the speaker tone quality and sound balance, select the “Bass”, “Treble”, “Balance” or “Fade” key and adjust it with the INFINITI controller.

Surround Vol. (if so equipped) : To adjust the surround sound volume, select “Surround Vol.” and adjust it with the INFINITI controller.

These items can also be adjusted by pushing and turning the AUDIO knob.

DivX姞 Registration Code (models with navigation system) :

Precision Phased Audio (if so equipped) :

The registration code for a device that is used to download DivX姞 files will be displayed on the screen. If a disc is loaded or a USB memory is connected to the audio system, this function will not be activated.

When this item is turned to ON, super high pitch sound and super low pitch sound are emphasized and midrange sound is played naturally. Speed Sensitive Vol. (if so equipped) : The audio system’s volume is increased with the vehicle speed. Select the “Speed Sensitive Vol.” and adjust the effect level with the INFINITI controller. The Speed Sensitive Volume function is turned off when the level is set to OFF. Increasing the value will cause the volume to increase faster with vehicle speed.

Phone settings (models with navigation system) For details of the “Phone” settings, see “BLUETOOTH姞 HANDS-FREE PHONE SYSTEM (models with navigation system)” later in this section.

Bluetooth姞 settings (for models with navigation system) For details of the “Bluetooth姞” settings, see “BLUETOOTH姞 HANDS-FREE PHONE SYSTEM (models with navigation system)” later in this section.

Display Album Cover Art (models with navigation system) : When this item is turned to ON, the album cover image is displayed when playing iPod or MP3 music files through a CD, DVD or USB memory. When the image is not properly embedded in the file or device, the image will not be displayed.

Monitor, climate, audio, phone and voice recognition systems 4-13

Guidance Volume : To adjust the guidance voice volume select the “Guidance Volume” and adjust it with the INFINITI controller. You can also adjust the guidance voice volume by turning the VOLUME control knob while voice guidance is being announced. Ringtone/Incoming Call/Outgoing Call :

SAA2554

Volume and Beeps settings (models with navigation system) The display as illustrated will appear when pushing the SETTING button, selecting the “Volume & Beeps” key. Audio Volume : To increase or decrease the audio volume, select the “Audio Volume” and adjust it with the INFINITI controller. You can also adjust the audio volume by turning the VOLUME control knob.

For the details of these items, see “BLUETOOTH姞 HANDS-FREE PHONE SYSTEM (models with navigation system)” later in this section. Switch Beeps : When this item is turned to ON, you will hear a beep sound when you use a button. Guidance Voice : When this item is turned to ON, you will hear voice guidance in the navigation operation or in other operations. NOTE: When the voice guidance is being announced during audio playback, turning the volume knob does not adjust the music level; it adjusts the guidance volume level. If voice guidance is not being heard, please check the Guidance Volume level.

4-14 Monitor, climate, audio, phone and voice recognition systems

SAA2605

Button beeps settings (models without navigation system) The “Button Beeps” screen will appear when pushing the SETTING button, selecting the “Button Beeps” key with the INFINITI controller and pushing the ENTER button. Button Beeps : When this item is turned to ON, you will hear a beep sound when you use a button.

When any mode button is pushed with the screen off, the screen turns on for further operation. The screen will turn off automatically 5 seconds after the operation is finished. To turn on the screen, set this item to the ON OFF” position, or push and hold the “ button. ● Brightness/Contrast/Background Color To adjust the brightness and contrast of the screen, select the “Brightness” or “Contrast” key. SAA2486

Display settings (models with navigation system) The display as illustrated will appear when pushing the SETTING button and selecting the “Display” key. Display Adjustment : To adjust the display settings, select the “Display Adjustment” key. The following settings are available. ● Display To turn off the screen, push the ENTER button and turn the “Display” indicator off. The other OFF” method is to push and hold the “ button for more than 2 seconds.

Then, you can adjust the brightness and the contrast using the INFINITI controller. For information on the “Background Color” key, refer to the separate Navigation System Owner’s Manual. Operating tips : Depending on the driver’s seat positions or the weather conditions, the display could be hard to read. Adjust the brightness and contrast of the display on the setting screen. Color Theme : Choose the theme color of the menu screen from “Black”, “Brown” or “Silver”.

SAA2115

DISPLAY settings (models without navigation system) The “Display” screen will appear when pushing the SETTING button, selecting “Display” key with the INFINITI controller and pushing the ENTER button. Display : To turn off the screen, push the ENTER button and turn the “ON” indicator off. When any mode button is pushed with the screen off, the screen turns on for further operation. The screen will turn off automatically 5 seconds after the operation is finished.

Monitor, climate, audio, phone and voice recognition systems 4-15

Clock settings

To turn on the screen, set this item to the “ON” ” button. position or push the “

The display as illustrated will appear when pushing the SETTING button and selecting the “Clock” key.

Brightness/Contrast/Background Colour : To adjust the brightness, contrast and background colour of the screen, select the appropriate “Brightness”, “Contrast” or “Background Colour” key and push the ENTER button. Then, you can adjust the brightness to “Darker” or “Brighter”, and the contrast to “Lower” or “Higher” using the INFINITI controller. Switch the background colour to the daytime mode or the nighttime mode by pushing the ENTER button.

The clock settings display cannot be operated while driving. Stop the vehicle in a safe place and apply the parking brake before setting the clock. On-screen Clock : SAA2487

Models with navigation system

When this item is turned to ON, a clock is always displayed in the upper right corner of the screen. This clock will indicate the time almost exactly because it is always adjusted by the GPS system (models with navigation system). Clock Format (24h) : When this item is turned to ON, the 24-hour clock is displayed. When this item is not turned to ON, the 12-hour clock is displayed. Offset (hour)/(min) (models with navigation system)/Clock Adjust (models without navigation system) :

SAA3562

Models without navigation system

4-16 Monitor, climate, audio, phone and voice recognition systems

Adjust the time by increasing or decreasing per hour or per minute.

Daylight Saving Time : Turn this item to ON for daylight saving time application. Time Zone : Choose the time zone from the following. Models with navigation system: ● Pacific ● Mountain ● Central ● Atlantic ● Newfoundland ● Hawaii

Others settings (models with navigation system)

● Alaska

The Others settings display will appear when pushing the SETTING button and selecting the “Others” key.

Models without navigation system:

The following items are available:

● Eniwetok, Kwajalein

● Comfort

● Midway Island, Samoa ● Hawaii ● Alaska ● Pacific

SAA2488

SAA3019

● Eastern

Models with navigation system

● Language & Units ● Voice Recognition ● Camera ● Sonar ● Image Viewer

SAA2739

Models without navigation system

Monitor, climate, audio, phone and voice recognition systems 4-17

Comfort settings

Speed Sensing Wiper Interval :

Models with navigation system

When this item is turned to ON, the wiper interval is adjusted automatically according to the vehicle speed.

The display illustrated will appear when pushing the SETTING button, selecting the “Others” key and then selecting the “Comfort” key. This key does not appear on the display until the ignition switch is pushed to the ON position. Models without navigation system The display illustrated will appear when pushing the SETTING button and selecting the “Comfort” key. This key does not appear on the display until the ignition switch is pushed to the ON position.

Selective Door Unlock : When this item is turned to ON, only the driver’s door is unlocked first after the door unlock operation. When the door handle request switch on the driver’s or front passenger’s side door is pushed to be unlocked, only the corresponding door is unlocked first. All the doors can be unlocked if the door unlock operation is performed again within 60 seconds.

Auto Interior Illumination :

When this item is turned to OFF, all the doors will be unlocked after the door unlock operation is performed once.

When this item is turned to ON, the interior lights will illuminate if any door is unlocked.

Intelligent Key Lock/Unlock :

Light Sensitivity :

When this item is turned to ON, door lock/unlock function by pushing the door handle request switch will be activated.

Adjust the sensitivity of the automatic headlights higher (right) or lower (left). Light Off Delay : Choose the duration of the automatic headlight off timer from 0, 30, 45, 60, 90, 120, 150 and 180 second periods.

Return All Settings to Default : Select this item and then select “YES” to return all settings to the default.

4-18 Monitor, climate, audio, phone and voice recognition systems

SAA2490

Language & Units settings The Language & Units settings display will appear when pushing the SETTING button, selecting the “Language & Units” key with the INFINITI controller and pushing the ENTER button. For models with the navigation system, select the “Others” key to show the “Language & Units” key. Select Language : Select the “Select Language” key. Choose “English”, “Français” or “Español” for your favorite display appearance.

If you select the “Français” key, the French language will be displayed, so please use the French Owner’s Manual. To obtain a French Owner’s Manual, see “OWNER’S MANUAL/SERVICE MANUAL ORDER INFORMATION” in the “9. Technical and consumer information” section.

CAMERA settings

Select Units :

Predictive Course Lines :

Select the “Select Units” key. Choose “US” (Mile, °F, MPG) or “Metric” (km, °C, L/100 km) for your favorite display appearance.

When this item is turned to ON, the predicted course lines will be displayed on the monitor when the selector/shift lever is in the R (Reverse) position.

Voice Recognition settings (models with navigation system)

The “CAMERA” screen will appear when selecting the “Camera” key. For the details about the camera system operation, see “REARVIEW MONITOR” later in this section.

SAA2404

Models with navigation system

For details about the “Voice Recognition” settings, see “INFINITI VOICE RECOGNITION SYSTEM (models with navigation system)” later in this section.

SAA2606

Models without navigation system

Monitor, climate, audio, phone and voice recognition systems 4-19

SONAR settings (if so equipped) The “Sonar” screen will appear when selecting the “Sonar” key with the INFINITI controller and pushing the ENTER button. For the details about the sonar system operation, see “SONAR SYSTEM” in the “5. Starting and driving” section. Sonar Display :

SAA2971

Models with navigation system

When this item is turned ON, the corner/center sonar indicator will appear when the sonar detects front or rear obstacles near the bumper. Corner Sonar Sensitivity : Adjust the sensitivity level of the corner sonar higher (right) or lower (left). Centre Sonar Sensitivity : Adjust the sensitivity level of the center sonar higher (right) or lower (left).

SAA2491

Image Viewer (models with navigation system) The image files in the USB memory will be displayed. To display the Image Viewer, push the SETTING button, select the “Other” key and then select the “Image Viewer” key. The image of the selected file is displayed on the right side of the screen. When a number of folders are included in the USB memory, select a folder from the list to display the file list.

SAA2920

Models without navigation system

4-20 Monitor, climate, audio, phone and voice recognition systems

●

Images will not be shown on the display while the vehicle is in any drive position to reduce driver distraction. To view images, stop the vehicle in a safe location and apply the parking brake.

(Next) Select the “ file.

●

” key to display the next

(Previous) Select the “ ous file.

” key to display the previ-

Setting the Image Viewer :

SAA2492

● Slideshow Speed

Full Screen Display : The full screen display will appear when selecting the “Full Screen Display” key. To operate the Image Viewer or to change the settings, select the desired key using the INFINITI controller. ●

(Start) Select the “ slideshow.

●

The Image Viewer setting display will appear when selecting the “Settings” key on the full screen display. The following settings are available for the full screen display.

” key to start playing the

Select the “Slideshow Speed” key. From the following display, select the changing time from 5, 10, 30, 60 seconds or “No Auto Change”. ● Slideshow Order Select the “Slideshow Order” key. From the following display, select “Random” or “Order List”. For “Order List”, the image order is the order of the files as stored on the USB memory.

(Stop) Select the “ show.

” key to stop the slide-

Monitor, climate, audio, phone and voice recognition systems 4-21

REARVIEW MONITOR Operating tips : ● Only files that meet the following conditions will be displayed. – Image type: JPEG – File Extensions: *.jpg, *jpeg – Maximum Resolution: 2048 × 1536 pixels – Maximum Size: 2-MB

When the selector lever is shifted into the R (Reverse) position, the monitor display shows view to the rear of the vehicle. The system is designed as an aid to the driver in detecting large stationary objects to help avoid damaging the vehicle. The system will not detect small objects below the bumper and may not detect objects close to the bumper or on the ground.

– Colors: 32768 (15-bit) – Maximum File Name lengths: 253-Bytes – Maximum Folders: 500 – Maximum Images per Folder: 1024 ● If an electronic device (such as a digital camera) is directly connected to the vehicle using a USB cable, no image will be displayed on the screen. ● If the file name is too long, some file names may not be entirely displayed. ● When the total number of characters in the file name exceeds 100 or if 1 file name in a directory exceeds 100 characters, all files will show a shortened 8-character version. The image will still be displayed when selected.

WARNING ● The rearview monitor is a convenience but it is not a substitute for proper vehicle operation because it has areas where objects cannot be viewed. Always look out the windows and check mirrors to be sure that it is safe to move before operating the vehicle. Always operate the vehicle slowly. ● Objects viewed in the RearView Monitor differ from actual distance because a wideangle lens is used. Objects in the RearView Monitor will appear visually opposite like ones viewed in the inside and outside mirrors. ● Make sure that the back door is securely closed when backing up.

4-22 Monitor, climate, audio, phone and voice recognition systems

● Underneath the bumper and the corner areas of the bumper cannot be viewed on the rearview monitor because of its monitoring range limitation. ● Do not put anything on the rearview camera. The rearview camera is installed above the license plate. ● When washing the vehicle with highpressure water, be sure not to spray it around the camera. Otherwise, water may enter the camera unit causing water condensation on the lens, a malfunction, fire or an electric shock. ● Do not strike the camera. It is a precision instrument. Otherwise, it may malfunction or cause damage resulting in a fire or an electric shock.

CAUTION There is a plastic cover over the camera. Do not scratch the cover when cleaning dirt or snow from the cover.

5 : Vehicle width guide lines 䊊

Indicate the vehicle width when backing up. 6 : Predicted course lines 䊊

SAA1896

HOW TO READ DISPLAYED LINES Guiding lines which indicate the vehicle width and distances to objects with reference to the A are displayed on the monitor. bumper line 䊊 Distance guide lines: Indicate distances from the bumper. 1 : approx. 1.5 ft (0.5 m) ● Red line 䊊

2 : approx. 3 ft (1 m) ● Yellow line 䊊

3 : approx. 7 ft (2 m) ● Green line 䊊

4 : approx. 10 ft (3 m) ● Green line 䊊

Indicate the predicted course when backing up. The predicted course lines will be displayed on the monitor when the selector lever is in the R (Reverse) position and the steering wheel is turned. The predicted course lines will move depending on how much the steering wheel is turned and will not be displayed while the steering wheel is in the neutral position.

HOW TO PARK WITH PREDICTED COURSE LINES WARNING ● Always turn and check that it is safe to park your car before backing up. Always back up slowly. ● Use the displayed lines as a reference. The lines are highly affected by the number of occupants, fuel level, vehicle position, road condition and road grade. ● If the tires are replaced with different sized tires, the predicted course line may not be displayed correctly.

● On a snow-covered or slippery road, there may be a difference between the predicted course line and the actual course line. ● If the battery is disconnected or becomes discharged, the predicted course lines may be displayed incorrectly. If this occurs, drive the vehicle on a straight road for more than 5 minutes. ● The displayed lines will appear slightly off to the right because the rearview camera is not installed in the rear center of the vehicle. ● The distance guide line and the vehicle width guide line should be used as a reference only when the vehicle is on a level paved surface. The distance viewed on the monitor is for reference only and may be different than the actual distance between the vehicle and displayed objects. ● When backing up the vehicle up a hill, objects viewed in the monitor are further than they appear. When backing up the vehicle down a hill, objects viewed in the monitor are closer than they appear. Use the inside mirror or glance over your shoulder to properly judge distances to other objects.

Monitor, climate, audio, phone and voice recognition systems 4-23

The vehicle width and predicted course lines are wider than the actual width and course.

SAA1897

SAA1898

1. Visually check that the parking space is safe before parking your vehicle. 2. The rearview of the vehicle is displayed A as illustrated when the on the screen 䊊 selector lever is moved to the R (Reverse) position.

3. Slowly back up the vehicle adjusting the steering wheel so that the predicted B enter the parking space course lines 䊊 C . 䊊

4-24 Monitor, climate, audio, phone and voice recognition systems

A , but the actual 3 ft (1 m) m) to the place 䊊 B . Note that distance on the hill is the place 䊊 any object on the hill is further than it appears on the monitor.

4. Maneuver the steering wheel to make the D parallel to vehicle width guide lines 䊊 C while referring to the parking space 䊊 the predicted course lines. 5. When the vehicle is parked in the space completely, move the selector lever to the P (Park) position (Automatic Transmission models) or in an appropriate gear (Manual Transmission models) and apply the parking brake.

DIFFERENCE BETWEEN PREDICTED AND ACTUAL DISTANCES The distance guide line and the vehicle width guide line should be used as a reference only when the vehicle is on a level, paved surface. The distance viewed on the monitor is for reference only and may be different from the actual distance between the vehicle and displayed objects.

SAA1899

Backing up on a steep uphill When backing up the vehicle up a hill, the distance guide lines and the vehicle width guide lines are shown closer than the actual distance. For example, the display shows 3 ft (1

Monitor, climate, audio, phone and voice recognition systems 4-25

A , but the actual 3 ft (1 m) m) to the place 䊊 B . Note that distance on the hill is the place 䊊 any object on the hill is closer than it appears on the monitor.

SAA1900

SAA1923

Backing up on a steep downhill

Backing up near a projecting object

When backing up the vehicle down a hill, the distance guide lines and the vehicle width guide lines are shown further than the actual distance. For example, the display shows 3 ft (1

A do not touch the The predicted course lines 䊊 object in the display. However, the vehicle may hit the object if it projects over the actual backing up course.

4-26 Monitor, climate, audio, phone and voice recognition systems

A . The vehicle may hit the object position 䊊 A if the object when backing up to the position 䊊 projects over the actual backing up course.

HOW TO ADJUST SCREEN To adjust the Display ON/OFF, Brightness, Tint, Color, Contrast and Black Level of the rearview monitor, push the SETTING button with the rearview monitor on, select the “Display” key on the screen and select the item key and adjust the level using the INFINITI controller. Do not adjust the Brightness, Tint, Color, Contrast and Black Level of the rearview monitor while the vehicle is moving. Make sure the parking brake is firmly applied and the engine is not running. The display of the predicted course lines can be set to ON or OFF. For details, see “CAMERA settings” earlier in this section.

OPERATING TIPS Backing up behind a projecting object

● When the selector lever is shifted to the R (Reverse) position, the monitor screen automatically changes to the rearview monitor mode.

C is shown further than the The position 䊊 B in the display. However, the posiposition 䊊 C is actually at the same distance as the tion 䊊

● It may take some time until the rearview monitor is displayed after the selector lever has been shifted to R from another position or to another position from R. Objects may

SAA1924

be distorted momentarily until the rearview monitor screen is displayed completely. ● When the temperature is extremely high or low, the screen may not clearly display objects. This is not a malfunction. ● When strong light directly enters the camera, objects may not be displayed clearly. This is not a malfunction. ● Vertical lines may be seen in objects on the screen. This is due to strong reflected light from the bumper. This is not a malfunction. ● The screen may flicker under fluorescent light. This is not a malfunction. ● The colors of objects on the rearview monitor may differ somewhat from those of the actual object. ● Objects on the monitor may not be clear in a dark place or at night. This is not a malfunction. ● If dirt, rain or snow attaches to the camera, the rearview monitor may not clearly display objects. Clean the camera. ● Do not use alcohol, benzine or thinner to clean the camera. This will cause discoloration. To clean the camera, wipe with a cloth dampened with diluted mild cleaning agent and then wipe with a dry cloth.

Monitor, climate, audio, phone and voice recognition systems 4-27

VENTILATORS ● Do not damage the camera as the monitor screen may be adversely affected. ● Do not use wax on the camera window. Wipe off any wax with a clean cloth dampened with mild detergent diluted with water.

SAA1499

Center ventilators

SAA0564B

Rear Open or close, and adjust the air flow direction of ventilators. : This symbol indicates that the ventilators are closed. : This symbol indicates that the ventilators are open.

SAA1500

Side ventilators

4-28 Monitor, climate, audio, phone and voice recognition systems

AUTOMATIC CLIMATE CONTROL You can individually set the driver and front passenger side temperature using each temperature control button.

WARNING ● The air conditioner cooling function operates only when the engine is running. ● Do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either. On hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possibly fatal injuries to people or animals. ● Do not use the recirculation mode for long periods as it may cause the interior air to become stale and the windows to fog up.

SAA2723

Models with navigation system

Start the engine and operate the automatic climate control system. When the “STATUS” button is pushed, the automatic climate control status screen will appear. (See “HOW TO USE STATUS BUTTON” earlier in this section.)

SAA1520

Models without navigation system

Monitor, climate, audio, phone and voice recognition systems 4-29

side temperature, air flow distribution and fan speed after the preferred temperature is set manually. 1. Push the “AUTO” button on. (The indicator on the button will illuminate and AUTO will be displayed.) 2. Turn the temperature control dial (driver side) to set the desired temperature. ● The temperature can be set within the following range. – For U.S.: 60 to 90°F (16 to 32°C) – For Canada: 64 to 90°F (18 to 32°C) SAA1527

Type A 1. “AUTO” automatic climate control ON button/Temperature control dial (driver side) 2. “A/C” air conditioner ON/OFF button

9. “ ” rear window defroster button (See “REAR WINDOW AND OUTSIDE MIRROR DEFROSTER SWITCH” in the “2. Instruments and controls” section.) ” intake air control button

3. “

” fan speed increase button

10. “

4. “

” front defroster button

AUTOMATIC CLIMATE CONTROL (Type A)

5. “MODE” manual air flow control button 6. “DUAL” zone control ON/OFF button/ Temperature control dial (passenger side) 7. “OFF” button for climate control system ” fan speed decrease button 8. “

Automatic operation Cooling and/or dehumidified heating (AUTO) : This mode may be used all year round. The system works automatically to control the in-

4-30 Monitor, climate, audio, phone and voice recognition systems

● The temperature of the passenger compartment will be maintained automatically. Air flow distribution and fan speed will also be controlled automatically. 3. You can individually set driver and front passenger side temperature using each temperature control button. When the “DUAL” button is pushed or the passenger side temperature control button is turned, the DUAL indicator will come on. To turn off the passenger side temperature control, push the “DUAL” button.

4. To turn off the climate control system, push the “OFF” button. A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction. Heating (A/C OFF) : The air conditioner does not activate in this mode. When you need to heat only, use this mode. 1. Push the “AUTO” button on. 2. Push the “A/C” button. (The A/C indicator will turn off.) 3. Turn the temperature control dial to set the desired temperature. ● The temperature of the passenger compartment will be maintained automatically. Air flow distribution and fan speed are also controlled automatically. ● Do not set the temperature lower than the outside air temperature. Otherwise the system may not work properly.

Dehumidified defrosting or defogging: 1. Push the “ ” front defroster button. (The indicator light on the button will come on.) 2. Turn the temperature control dial to set the desired temperature.

Manual operation

● To quickly remove ice from the outside of the windows, push the fan speed increase but” and set it to the maximum ton “ position.

Push the “AUTO” button to return to automatic control of the fan speed.

● As soon as possible after the windshield is clean, push the “AUTO” button to return to the auto mode. ” front defroster button is ● When the “ pushed, the air conditioner will automatically be turned on at outside temperatures above 23°F (⫺5°C) to defog the windshield, and the air recirculate mode will automatically be turned off. Outside air is drawn into the passenger compartment to improve the defogging performance.

Fan speed control : ” or dePush the fan speed increase “ ” buttons to manually control the crease “ fan speed.

Air recirculation : Push the intake air control button ” to recirculate interior air inside “ ” the vehicle. The indicator light on the “ side will come on. The air recirculation mode cannot be activated when the air conditioner is in the front defrost”. ing mode “ Outside air circulation : Push the intake air control button ” to draw outside air into the “ passenger compartment. The indicator light on ” side will come on. the “

● Not recommended if windows fog up.

Monitor, climate, audio, phone and voice recognition systems 4-31

Automatic intake air control : In the AUTO mode, the intake air will be controlled automatically. To manually control the intake air, push the intake air control button ”. To return to the automatic con“ trol mode, push the intake air control button ” for about 2 seconds. The indi“ cator lights (both air recirculation and outside air circulation sides) will flash twice, and then the intake air will be controlled automatically. Air flow control : Pushing the “MODE” manual air flow control button selects the air outlet to: SAA2972

: Air flows from center and side ventilators.

Type B

: Air flows from center and side ventilators and foot outlets.

1. “AUTO” automatic operation button/ Temperature control dial (driver side)

: Air flows mainly from foot outlets.

2. “A/C” air conditioner ON/OFF button

: Air flows from defroster and foot outlets. To turn the system off : Push the OFF button.

3. “

” fan speed increase button

4. “

” front defroster button

5. “MODE” manual air flow control button 6. “DUAL” zone control ON/OFF button/ Temperature control dial (passenger side) 7. “OFF” button for climate control system 8. “

” fan speed decrease button

4-32 Monitor, climate, audio, phone and voice recognition systems

9. “ ” rear window defogger button (See “REAR WINDOW AND OUTSIDE MIRROR DEFROSTER SWITCH” in the “2. Instruments and controls” section.) ” auto-recirculation button/ 10. “ intake air control button

AUTOMATIC CLIMATE CONTROL (Type B) Automatic operation (AUTO) The AUTO mode may be used year-round as the system automatically controls constant temperature, air flow distribution and fan speed after the desired temperature is set manually. To turn off the heater and air conditioner, push the “OFF” button. Cooling and dehumidified heating: 1. Push the “AUTO” button. (The AUTO indicator light will illuminate and “AUTO” will appear on the display.) 2. If the A/C indicator light does not illuminate, push the “A/C” button. (The A/C indicator light will illuminate.) 3. Turn the temperature control dial (driver’s side) to set the desired temperature. ● The temperature can be set within the following range. – For U.S.: 60 to 90°F (16 to 32°C) – For Canada: 64 to 90°F (18 to 32°C)

● When the DUAL indicator light is turned off: – Pushing the driver’s side “AUTO” button changes both the driver’s and front passenger’s side temperature. – Pushing the passenger’s side “DUAL” button changes only the front passenger’s side temperature. (The DUAL indicator light will illuminate and “DUAL” will appear on the display.) ● To set separate desired temperatures for the driver and front passenger, push the “DUAL” button, the indicator light illuminates, and then turn the corresponding temperature control dial. ● To cancel the separate temperature setting, push the “DUAL” button, the indicator light turns off, and the driver’s side temperature setting will be applied to both the driver’s and front passenger’s sides. A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction.

Heating (A/C off): 1. Push the “AUTO” button. (The AUTO indicator light will illuminate and “AUTO” will appear on the display.) 2. If the A/C indicator light illuminates, push the “A/C” button. (The A/C indicator light will turn off.) 3. Turn the temperature control dial to set the desired temperature. ● When the DUAL indicator light is turned off: – Pushing the driver’s side “AUTO” button changes both the driver’s and front passenger’s side temperature. – Pushing the passenger’s side “DUAL” button changes only the front passenger’s side temperature. (The DUAL indicator light will illuminate and “DUAL” will appear on the display.) ● To set separate desired temperatures for the driver and front passenger, push the “DUAL” button, the indicator light illuminates, and then turn the corresponding temperature control dial.

Monitor, climate, audio, phone and voice recognition systems 4-33

● To cancel the separate temperature setting, push the “DUAL” button, the indicator light turns off, and the driver’s side temperature setting will be applied to both the driver’s and front passenger’s sides. ● Do not set the temperature lower than the outside air temperature. Doing so may cause the temperature not to be controlled properly. ● If the windows fog up, use dehumidified heating instead of the A/C off heating. Dehumidified defrosting/defogging: 1. Push the “ ” button. (The indicator light will illuminate.) 2. Turn the temperature control dial to set the desired temperature. ● To remove frost from the outside surface of the windshield quickly, set the temperature control and fan speed control to their maximum position. ● After the windshield is cleared, push the “AUTO” button to set to the automatic mode. ” button is pushed, the ● When the “ air conditioner will automatically turn on when the outside air temperature is

above 23°F (⫺5°C) to defog the windshield. The air recirculation mode will automatically turn off. The outside air circulation mode will be selected to improve the defogging performance.

Manual operation The manual mode can be used to control the heater and air conditioner to your desired settings. To turn off the heater and air conditioner, push the “OFF” button. Fan speed control :

: Air flows mainly from the foot outlets. : Air flows from the defogger and foot outlets. Temperature control : Turn the temperature control dial to set the desired temperature. ● The temperature can be set within the following range. – For U.S.: 60 to 90°F (16 to 32°C) – For Canada: 64 to 90°F (18 to 32°C) Air recirculation :

Push the fan speed control button “ increase the fan speed.

” to

Push the fan speed control button “ decrease the fan speed.

” to

Push the intake air control button to recirculate interior air inside the vehicle. The indicator light ” side will illuminate. on the “

Push the “AUTO” button to change the fan speed to the automatic mode.

The air recirculation mode cannot be activated when the air conditioner is in the front defrost”. ing mode “

Air flow control : Push the “MODE” button to change the air flow mode. : Air flows from the center and side ventilators. : Air flows from the center and side ventilators, and foot outlets.

4-34 Monitor, climate, audio, phone and voice recognition systems

Outside air circulation : Push the intake air control button to draw outside air into the passenger compartment. The indicator light on the “ ” side will turn off. “

” side and

Automatic intake air control :

Ion control :

In the AUTO mode, the intake air will be controlled automatically. To manually control the intake air, push the intake air control button.

This unit generates highly concentrated Plasmacluster ions into the air blown from the ventilators and reduces odor absorbed into the interior trim.

To return to the automatic control mode, push the intake air control button until the indicator ” side illuminates. The light on the “ advanced climate control system turns on and the intake air will be controlled automatically.

When the air conditioner is turned on, the system generates Plasmacluster ions automatically.

To turn system off SAA2734

Push the OFF button.

Advanced climate control system

Models with navigation system

The advanced climate control system keeps the air inside of the vehicle clean, using the ion control and the automatic air intake control with outside odor and exhaust gas detecting sensor.

The amount of Plasmacluster ions increases according to the amount of air flow. When the ” is displayed on the air flow is high, “ screen and when the air flow is low, the indica”. tion in the screen changes to “ Outside odor and exhaust gas detection sensor : This vehicle is equipped with an outside odor and exhaust gas detection sensor. When the automatic intake air control is ON, the sensor detects odors and exhaust gas, and then the system automatically changes from the outside air circulation mode to the recirculation mode.

SAA2735

When the intake air control button is pushed under the following conditions, the indicator ” side will illuminate and the light on the “ outside odor and exhaust gas detection sensor will turn on.

Models without navigation system

Monitor, climate, audio, phone and voice recognition systems 4-35

● The air flow control is not in the front defogger mode (the indicator light on the ” front defogger button is turned off). “

The filter should be replaced if air flow is extremely decreased or when windows fog up easily when operating heater or air conditioning system.

● The outside temperature is about 32°F (0°C) or more.

Type B:

● The outside odor and exhaust gas detection sensor detects industrial odors such as pulp or chemicals and exhaust gas such as gasoline or diesel. When the automatic intake air control is ON, for the first 5 minutes, the recirculation mode is selected to prevent dust, dirt and pollen from entering the vehicle and cleans the air inside of the vehicle with Plasmacluster ion that are emitted from the ventilator. After 5 minutes, the sensor detects outside odors and exhaust gas and automatically alternates between the recirculation mode and outside air circulation mode.

OPERATING TIPS When the engine coolant temperature and outside air temperature are low, the air flow from the foot outlets may not operate for a maximum of 150 seconds. This is not a malfunction. After the coolant temperature warms up, air will flow normally from the foot outlets.

SIC2768

The sunload sensor 䊊 on the instrument panel helps maintain a constant temperature. Do not put anything on or around this sensor. A

IN-CABIN MICROFILTER Type A: The climate control system is equipped with an in-cabin microfilter which collects dirt, pollen, dust, etc. To make sure the air conditioner heats, defogs, and ventilates efficiently, replace the filter in accordance with the maintenance schedule in the INFINITI Service and Maintenance Guide. To replace the filter, contact an INFINITI retailer.

4-36 Monitor, climate, audio, phone and voice recognition systems

The climate control system is equipped with a natural grape seed polyphenol filter which collects and neutralizes dirt, pollen, dust, etc. To make sure that the air conditioner heats, defogs and ventilates efficiently, replace the filter in accordance with the maintenance schedule in the INFINITI Service and Maintenance Guide. To replace the filter, contact an INFINITI retailer. The filter should be replaced if the air flow decreases significantly or if windows fog up easily when operating the heater or air conditioner.

SERVICING CLIMATE CONTROL The climate control system in your INFINITI is charged with a refrigerant designed with the environment in mind. This refrigerant will not harm the earth’s ozone layer. However, special charging equipment and lubricant are required when servicing your INFINITI air conditioner. Using improper refrigerants or lubricants will cause severe damage to your climate control system. (See “CAPACITIES AND RECOMMENDED FUEL/LUBRICANTS” in the “9. Technical and

AUDIO SYSTEM consumer information” section for climate control system refrigerant and lubricant recommendations.) Your INFINITI retailer will be able to service your environmentally friendly climate control system.

WARNING The system contains refrigerant under high pressure. To avoid personal injury, any air conditioner service should be done only by an experienced technician with the proper equipment.

AUDIO OPERATION PRECAUTIONS Radio

reception area, and do not indicate any malfunction in your INFINITI radio system.

Push the ignition switch to the ACC or ON position and push the radio band select button to turn on the radio. If you listen to the radio with the engine not running, the ignition switch should be pushed to the ACC position.

Reception conditions will constantly change because of vehicle movement. Buildings, terrain, signal distance and interference from other vehicles can work against ideal reception. Described below are some of the factors that can affect your radio reception.

Radio reception is affected by station signal strength, distance from radio transmitter, buildings, bridges, mountains and other external influences. Intermittent changes in reception quality normally are caused by these external influences.

Some cellular phones or other devices may cause interference or a buzzing noise to come from the audio system speakers. Storing the device in a different location may reduce or eliminate the noise.

Using a cellular phone in or near the vehicle may influence radio reception quality. Radio reception : Your INFINITI radio system is equipped with state-of-the-art electronic circuits to enhance radio reception. These circuits are designed to extend reception range, and to enhance the quality of that reception. However there are some general characteristics of both FM and AM radio signals that can affect radio reception quality in a moving vehicle, even when the finest equipment is used. These characteristics are completely normal in a given

Monitor, climate, audio, phone and voice recognition systems 4-37

Static and flutter: During signal interference from buildings, large hills or due to antenna position, usually in conjunction with increased distance from the station transmitter, static or flutter can be heard. This can be reduced by lowering the treble setting to reduce the treble response.

SAA0306

FM radio reception : Range: FM range is normally limited to 25 to 30 miles (40 to 48 km), with monaural (single channel) FM having slightly more range than stereo FM. External influences may sometimes interfere with FM station reception even if the FM station is within 25 miles (40 km). The strength of the FM signal is directly related to the distance between the transmitter and receiver. FM signals follow a line-of-sight path, exhibiting many of the same characteristics as light. For example they will reflect off objects. Fade and drift: As your vehicle moves away from a station transmitter, the signals will tend to fade and/or drift.

Multipath reception: Because of the reflective characteristics of FM signals, direct and reflected signals reach the receiver at the same time. The signals may cancel each other, resulting in momentary flutter or loss of sound. AM radio reception : AM signals, because of their low frequency, can bend around objects and skip along the ground. In addition, the signals can be bounced off the ionosphere and bent back to earth. Because of these characteristics. AM signals are also subject to interference as they travel from transmitter to receiver. Fading: Occurs while the vehicle is passing through freeway underpasses or in areas with many tall buildings. It can also occur for several seconds during ionospheric turbulence even in areas where no obstacles exist. Static: Caused by thunderstorms, electrical power lines, electric signs and even traffic lights.

4-38 Monitor, climate, audio, phone and voice recognition systems

Satellite radio reception : When the satellite radio is used for the first time or the battery has been replaced, the satellite radio may not work properly. This is not a malfunction. Wait more than 10 minutes with the satellite radio ON and the vehicle outside of any metal or large building for the satellite radio to receive all of the necessary data. The satellite radio mode requires an active XM姞 Satellite Radio subscription. The satellite radio is not available in Alaska, Hawaii and Guam. The satellite radio performance may be affected if cargo carried on the roof blocks the satellite radio signal. If possible, do not put cargo near the satellite antenna. A build up of ice on the satellite radio antenna can affect satellite radio performance. Remove the ice to restore satellite radio reception.

● Trying to load a CD with the CD door closed could damage the CD and/or CD player. ● During cold weather or rainy days, the player may malfunction due to the humidity. If this occurs, remove the CD and dehumidify or ventilate the player completely. ● The player may skip while driving on rough roads. ● The CD player sometimes cannot function when the passenger compartment temperature is extremely high. Decrease the temperature before use. ● Only use high quality 4.7 in (12 cm) round discs that have the “COMPACT disc DIGITAL AUDIO” logo on the disc or packaging. ● Do not expose the CD to direct sunlight. ● CDs that are of poor quality, dirty, scratched, covered with fingerprints, or that have pin holes may not work properly. ● The following CDs may not work properly: SAA0480

– Copy control compact discs (CCCD)

Compact Disc (CD) player

– Recordable compact discs (CD-R)

● Do not force a compact disc into the CD insert slot. This could damage the CD and/or CD player.

– Rewritable compact discs (CD-RW)

● Do not use the following CDs as they may cause the CD player to malfunction. – 3.1 in (8 cm) discs – CDs that are not round – CDs with a paper label – CDs that are warped, scratched, or have abnormal edges ● This audio system can only play prerecorded CDs. It has no capabilities to record or burn CDs. ● If the CD cannot be played, one of the following messages will be displayed. CHECK DISC: – Confirm that the CD is inserted correctly (the label side is facing up, etc.). – Confirm that the CD is not bent or warped and it is free of scratches. PUSH EJECT: This is an error due to the temperature inside the player is too high. Remove the CD by pushing the EJECT button, and after a short time reinsert the CD. The CD can be played when the temperature of the player returns to normal.

Monitor, climate, audio, phone and voice recognition systems 4-39

● During cold weather or rainy days, the player may malfunction due to humidity. If this occurs, remove the CD/DVD and dehumidify or ventilate the player completely.

UNPLAYABLE: The file is unplayable in this audio system (only MP3 or WMA CD).

● The player may skip while driving on rough roads. ● The CD/DVD player sometimes cannot function when the passenger compartment temperature is extremely high. Decrease the temperature before use. ● Only use high quality 4.7 in (12 cm) round discs that have the “COMPACT disc DIGITAL AUDIO” or “DVD Video” logo on the disc or packaging. ● Do not expose the CD/DVD to direct sunlight. ● CD/DVDs that are of poor quality, dirty, scratched, covered with fingerprints, or that have pinholes may not work properly. LHA0484

● The following CD/DVDs are not guaranteed to play:

DVD (Digital Versatile Disc) player (models with navigation system)

– Copy control compact discs (CCCD)

● Do not force a compact disc into the CD/DVD insert slot. This could damage the CD/DVD player.

– Rewritable compact discs (CD-RW)

– Recordable compact discs (CD-R)

– Recordable DVDs (DVD±R, DVD±R DL) – Rewritable DVDs (DVD±RW, DVD±RW DL)

4-40 Monitor, climate, audio, phone and voice recognition systems

● Do not use the following CD/DVDs as they may cause the CD/DVD player to malfunction. – 3.1 in (8 cm) discs – CD/DVDs that are not round – CD/DVDs with a paper label – CD/DVDs that are warped, scratched or have abnormal edges – This audio system can only play prerecorded CD/DVDs. It has no capabilities to record or burn CD/DVDs. ● If the CD/DVD cannot be played, one of the following messages will be displayed. Disc Read Error: – Confirm that the CD/DVD is inserted correctly (the label side is facing up, etc.). – Confirm that the CD/DVD is not bent or warped and it is free of scratches.

Copyright and trademark :

Please Eject Disc: – This may be an error due to the temperature inside the player being too high. Remove the CD/DVD by pushing the EJECT button, and after a short time reinsert the CD/DVD. The CD/DVD can be played when the temperature of the player returns to normal. If the error persists, consult your local retailer. Unplayable File:

● The technology protected by the U.S. patent and other intellectual property rights owned by Macrovision Corporation and other right holders is adopted for this system. ● This copyright protected technology cannot be used without a permit from Macrovision Corporation. It is limited to be personal use, etc., as long as the permit from Macrovision Corporation is not issued.

– The file may be copy protected.

● Modifying or disassembling is prohibited.

– The file is not MP3, WMA, AAC, M4A or DivX姞 type.

● Dolby digital is manufactured under license from Dolby Laboratories, Inc.

Region Invalid: – The DVD is not for region 1 or all regions. Use DVDs with a region code “1”, “ALL” or “1 included” for your DVD entertainment A is displayed system. (The region code 䊊 as a small symbol printed on the top of B .) This vehicle-installed DVD the DVD 䊊 player cannot play DVDs with a region code other than “1” or “ALL”.

” are ● Dolby and the double D mark “ trademarks of Dolby Laboratories, Inc. ” are ● DTS and DTS Digital Surround “ registered trademarks of Digital Theater Systems, Inc. Parental level (parental control) : DVDs with the parental control setting can be played with this system. Please use your own judgement to set the parental control with the system.

Monitor, climate, audio, phone and voice recognition systems 4-41

● The USB player sometimes cannot function when the passenger compartment temperature is extremely high. Decrease the temperature before use.

● Large video podcast files cause slow responses in an iPod姞. The vehicle center display may momentarily black out, but it will soon recover.

● Do not leave USB memory in a place prone to static electricity or where the air conditioner blows directly. The data in the USB memory may be damaged.

● If an iPod姞 automatically selects large video podcast files while in the shuffle mode, the vehicle center display may momentarily black out, but it will soon recover.

USB (Universal Serial Bus)

● The vehicle is not equipped with a USB memory stick.

● Audiobooks may not play in the same order as they appear on an iPod姞.

This system supports various USB memory sticks, USB hard drives and iPod姞 players. There are some USB devices which may not be supported with this system.

● A USB device cannot be formatted with this system. To format a USB device, use a personal computer.

Disc selection : The following disc formats can be played with the DVD drive. ● DVD-VIDEO ● VIDEO-CD ● CD-DA (Conventional Compact Disc) ● DTS-CD

● Make sure that the USB device is connected correctly into the USB connector. ● Do not force the memory stick or USB cable into the USB connector. This could damage the connector. ● During cold weather or rainy days, the player may malfunction due to humidity. If this occurs, remove the USB device and dehumidify or ventilate the USB player completely.

● Partitioned USB devices may not be played correctly. ● Some characters used in other languages (Chinese, Japanese, etc.) are not displayed properly on the vehicle center screen. Using English language characters with a USB device is recommended. ● Do not connect a USB device if a connector or cable is wet. Allow the cable and/or connectors to dry completely before connecting the USB device. If the connector is exposed to fluids other than water, evaporative residue may cause a short between the connector pins.

4-42 Monitor, climate, audio, phone and voice recognition systems

● An iPod nano姞 (1st generation) may remain in fast forward or rewind mode if it is connected during a seek operation. In this case, please manually reset the iPod姞. ● An iPod nano姞 (2nd generation) will continue to fast forward or rewind if it is disconnected during a seek operation. ● An incorrect song title may appear when the Play Mode is changed while using the iPod nano姞 (2nd generation) iPod姞 is a trademark of Apple Inc., registered in the U.S. and other countries.

Compressed Audio Files (MP3/WMA/ AAC) Explanation of terms : ● MP3 — MP3 is short for Moving Pictures Experts Group Audio Layer 3. MP3 is the most well known compressed digital audio file format. This format allows for near “CD quality” sound, but at a fraction of the size of normal audio files. MP3 conversion of an audio track can reduce the file size by approximately a 10:1 ratio (Sampling: 44.1 kHz, Bit rate: 128 kbps) with virtually no perceptible loss in quality. The compression reduces certain parts of sound that seem inaudible to most people. ● WMA — Windows Media Audio (WMA) is a compressed audio format created by Microsoft as an alternative to MP3. The WMA codec offers greater file compression than the MP3 codec, enabling storage of more digital audio tracks in the same amount of space when compared to MP3s at the same level of quality. ● AAC/M4A — Advanced Audio Coding (AAC) is a lossy audio compression format. Audio files that have been encoded with AAC are generally smaller in size and deliver a higher quality of sound than MP3.

● Bit rate — Bit rate denotes the number of bits per second used by a digital music file. The size and quality of a compressed digital audio file is determined by the bit rate used when encoding the file. ● Sampling frequency — Sampling frequency is the rate at which the samples of a signal are converted from analog to digital (A/D conversion) per second. ● Multisession — Multisession is one of the methods for writing data to media. Writing data once to the media is called a single session, and writing more than once is called a multisession. ● ID3/WMA Tag — The ID3/WMA tag is the part of the encoded MP3 or WMA file that contains information about the digital music file such as song title, artist, album title, encoding bit rate, track time duration, etc. ID3 tag information is displayed on the Album/Artist/Track title line on the display. * Windows姞 and Windows Media姞 are registered trademarks or trademarks of Microsoft Corporation in the United States of America and/or other countries.

SAA2494

Playback order : ● The folder names of folders not containing compressed audio files are not shown in the display.

Monitor, climate, audio, phone and voice recognition systems 4-43

● If there is a file in the top level of a disc/USB, “Root Folder” is displayed. ● The playback order is the order in which the files were written by the writing software, so the files might not play in the desired order. ● Music playback order of compressed audio files is as illustrated in the next figure.

4-44 Monitor, climate, audio, phone and voice recognition systems

Specification chart: Supported media

CD, CD-R, CD-RW, DVD-ROM (models with navigation system), DVD±R, DVD±RW, DVD±R DL, USB2.0 CD, CD-R, CD-RW, DVD-ROM (models with navigation system), DVD±R, DVD±RW, DVD±R DL: ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. * Files saved using the Live File System component (on a Windows Vista-based computer) are not supported.UDF Bridge (UDF1.02+ISO9660), UDF1.5, UDF2.0 * VDF1.5/VDF2.0 (packet writing) is not supported.

Supported file systems

USB memory: FAT16, FAT32 Version MP3

Supported versions*1

8 kHz - 48 kHz

Bit rate

8 kbps - 320 kbps, VBR*4

Version

WMA7, WMA8, WMA9

WMA*2 Sampling frequency AAC*5

32 kHz - 48 kHz

Bit rate

32 kbps - 192 kbps, VBR (Ver.9)*4

Version

MPEG-AAC

Sampling frequency

8 kHz - 96 kHz

Bit rate

16 kbps - 320 kbps, VBR*4

Tag information (Song title and Artist name)

Folder levels

MPEG1 Audio Layer 3

Sampling frequency

ID3 tag VER1.0, VER1.1, VER2.2, VER2.3, VER2.4 (MP3 only) WMA tag (WMA only) With navigation system: Folder levels: 8, Folders: 512 (including root folder), Files: 5,000 Without navigation system: Folder levels: 8, Folders and files: 999 (Max. 255 files for one folder)

Monitor, climate, audio, phone and voice recognition systems 4-45

Supported media

CD, CD-R, CD-RW, DVD-ROM (models with navigation system), DVD±R, DVD±RW, DVD±R DL, USB2.0

Text character number limitation

With navigation system: 100 characters Without navigation system: 64 characters

Displayable character codes*3

01: ASCII, 02: ISO-8859-1, 03: UNICODE (UTF-16 BOM Big Endian), 04: UNICODE (UTF-16 Non-BOM Big Endian), 05: UNICODE (UTF-8), 06: UNICODE (Non-UTF-16 BOM Little Endian), 07: SHIFT-JIS

*1

Files created with a combination of 48 kHz sampling frequency and 64 kbps bit rate cannot be played.

*2

Protected WMA files (DRM) cannot be played.

*3

Available codes depend on what kind of media, versions and information are going to be displayed.

*4

When VBR files are played, the playback time may not be displayed correctly.

*5

Models with navigation system

4-46 Monitor, climate, audio, phone and voice recognition systems

Troubleshooting guide: Symptom Cannot play

Cause and Countermeasure Check if the disc or USB device was inserted correctly. Check if the disc is scratched or dirty. Check if there is condensation inside the player, and if there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, the player will play correctly after it returns to the normal temperature. If there is a mixture of music CD files (CD-DA data) and compressed audio files on a CD, only the music CD files (CD-DA data) will be played. Files with extensions other than “.MP3 (.mp3)”, “.WMA (.wma)”, “.AAC (.aac)”, “.M4A (.m4a)”, or “.AA3 (.aa3)” cannot be played. In addition, the character codes and number of characters for folder names and file names should be in compliance with the specifications. Check if the disc or the file is generated in an irregular format. This may occur depending on the variation or the setting of compressed audio writing applications or other text editing applications. Check if the finalization process, such as session close and disc close, is done for the disc. Check if the disc or USB device is protected by copyright.

Poor sound quality

Check if the disc is scratched or dirty.

It takes a relatively long time before the music starts playing.

If there are many folder or file levels on the disc or USB device, some time may be required before the music starts playing.

Music cuts off or skips

The writing software and hardware combination might not match, or the writing speed, writing depth, writing width, etc., might not match the specifications. Try using the slowest writing speed.

Skipping with high bit rate files

Skipping may occur with large quantities of data, such as for high bit rate data.

Move immediately to the next song when playing.

If an unsupported compressed audio file has been given a supported extension like .MP3, or when play is prohibited by copyright protection, the player will skip to the next song.

Monitor, climate, audio, phone and voice recognition systems 4-47

Symptom The songs do not play back in the desired order.

Cause and Countermeasure The playback order is the order in which the files were written by the writing software, so the files might not play in the desired order. Random/Shuffle may be active on the audio system or on a USB device.

4-48 Monitor, climate, audio, phone and voice recognition systems

Compressed Video Files (models with navigation system) Explanation of terms : ● DivX姞 - DivX姞 refers to the DivX姞 codec owned by DivX, Inc. used for a lossy compression of video based on MPEG-4. ● AVI - AVI stands for Audio Video Interleave. It is a standard file format originated by Microsoft Corporation. A “.divx” encoded file can be saved into the “.avi” file format for playback on this system if it meets the requirements stated in the table in this section. However, not all the “.avi” files are playable on this system since different encodings can be used than the DivX姞 codec. ● ASF - ASF stands for Advanced Systems Format. It is a file format owned by Microsoft Corporation. Note: Only “.asf” files that meet the requirements stated in the table in this section can be played. ● Bit rate — Bit rate denotes the number of bits per second used by a digital video file. The size and quality of a compressed digital audio file is determined by the bit rate used when encoding the file.

Monitor, climate, audio, phone and voice recognition systems 4-49

Requirement for Supporting Video Playback:

Bluetooth姞 Audio player (models with navigation system)

Media

CD, CD-R, CD-RW, DVD, DVD±R, DVD±RW, DVD±RW DL, USB 2.0 Memory

File Systems

CD, CD-R, CD-RW, DVD, DVD±R, DVD±RW, DVD±RW DL

ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet, UDF Bridge (UDF1.02+ISO9660), UDF1.5, UDF2.0 - ISO9660 Level 3 (packet writing) is not supported. - Files saved using the Live File System component (on a Windows Vista-based computer) are not supported. - VDF1.5/VDF2.0 (packet writing) is not supported.

● Some Bluetooth姞 audio devices may not be recognized by the in-vehicle audio system.

USB Memory

FAT16, FAT32

.divx, .avi

Video Codecs

DivX3, DivX4, DivX5, DivX6

Audio Codecs

MP3, MPEG2.5 Audio Layer3, AC3, LPCM

● Operating procedure of the Bluetooth姞 audio player will vary depending on the device. Make sure it is understood how to operate an audio device before using it with this system.

Video Codec

ISO-MPEG4

Audio Codec

G.726

– Receiving a hands-free call.

Maximum Average

4Mbps

Maximum Peak

8Mbps

– Checking the connection to the handsfree phone.

Minimum

32 × 32

Maximum

720 × 480

Minimum

32 × 32

Maximum

720 × 576

File Types

.asf

Bit Rates

Resolution

.divx, .avi

.divx, .avi

.asf

4-50 Monitor, climate, audio, phone and voice recognition systems

● It is necessary to set up the wireless connection between a compatible Bluetooth姞 audio device and the in-vehicle Bluetooth姞 module before using the Bluetooth姞 audio player.

● The Bluetooth姞 audio player may be stopped under the following conditions:

● Do not place a Bluetooth姞 audio device in an area surrounded by metal or far away from the in-vehicle Bluetooth姞 module to prevent tone quality degradation and wireless connection disruption.

● While an audio device is connected through a Bluetooth姞 wireless connection, the battery power of the device may discharge quicker than usual. ● This system supports the Bluetooth姞 Audio Distribution Profile (A2DP, AVRCP). ● Bluetooth姞 is a trademark owned by Bluetooth SIG, Inc. and licensed to Clarion Co., Ltd.

Music Box姞 (if so equipped) Recording : ● Note that data that is lost and not stored on the hard drive/flash memory due to system damage, improper operation or malfunction is not under warranty. ● Vehicle owners are not permitted to record music without permission of the owner of the copyright except for personal use. ● If there are problems recording a CD, first check if it has been recorded in the system properly.

● Jumping sounds may be recorded when a compact disc is recorded while driving on rough roads and excessive vibration occurs. ● A mark indicating jumping sounds is displayed if jumping sounds are recorded. ● No sounds may be recorded if jumping sounds occurs or the disc is in poor condition. ● Tracks that include Serial Copy Management System (SCMS) are not recorded. ● If a compact disc is scratched or dirty, it may not be recorded, jumping sounds may occur or it may take a long time to record. Automatic title download : ● The title information that is automatically downloaded may differ from the actual title. ● When newly released compact discs are recorded, their title information may not be downloaded. ● The title information in the hard drive/flash memory can be updated. (See “Playing recorded songs” later in this section.)

● Due to high speed recording, some CDs may not be recordable, depending on the condition of the disc.

Monitor, climate, audio, phone and voice recognition systems 4-51

No satellite radio reception is available unless an XM Satellite Radio subscription is active. The audio control buttons are also located on the center multi-function control panel.

SAA2724

1. ON·OFF/VOLUME control knob 2. Radio SCAN (tuning) button 3. RDM (random) RPT (repeat) play button 4. Radio CAT (category)/REW (rewind) button for SEEK/TRACK

5. Radio CAT (category)/FF (fast forward) button for SEEK/TRACK 6. Radio tuning / MP3/WMA/AAC folder selector / AUDIO control knob 7. CD/DVD EJECT button 8. Radio station preset buttons

4-52 Monitor, climate, audio, phone and voice recognition systems

After receiving the activation signal, an available channel list will be automatically updated in the radio. For XM, push the ignition switch from LOCK to ACC to update the channel list.

Audio main operation Head unit : The auto loudness circuit enhances the low and high frequency ranges automatically in both radio reception and CD playback. ON·OFF/Volume control : SAA1533

Models with navigation system 1. AM·FM·SAT radio band select button 2. DISC·AUX button

SAA2922

Models without navigation system 1. AUX/Satellite band select button 2. RADIO AM·FM radio band select button 3. DISC button

FM-AM-SAT RADIO WITH COMPACT DISC (CD) PLAYER For all operation precautions, see “AUDIO OPERATION PRECAUTIONS” earlier in this section. The satellite radio mode requires an active XM Satellite Radio subscription. The satellite radio is not available in Alaska, Hawaii and Guam. It may take some time to receive the activation signal after subscribing the XM Satellite Radio.

Push the ignition switch to the ACC or ON position, and then push the ON·OFF button while the system is off to turn on the last audio source (i.e. FM or CD), which was playing immediately before the system was turned off. While the system is on, pushing the ON·OFF button turns the system off. Turn the VOL control knob to adjust the volume. Adjusting tone quality and speaker balance : To adjust Bass, Treble, Balance and Fade, push the Audio control knob. When the display shows the setting you want to change (Bass, Treble, Balance and Fade), rotate the Audio control knob to set the desired setting. For the other setting methods, see “HOW TO USE SETTING BUTTON” earlier in this section.

Monitor, climate, audio, phone and voice recognition systems 4-53

This vehicle has some sound effect functions as follows: ● Speed Sensitive Vol. (if so equipped) ● Precision Phased Audio (if so equipped) For more details, see “HOW TO USE SETTING BUTTON” earlier in this section. For models with BOSE Sound System, tone qualities are adjusted automatically according to the roof condition (open/close). The output from the audio system may be interrupted during adjustment. This is not a malfunction.

FM-AM-SAT radio operation When the radio band select button is pushed while the ignition switch is in the ACC or ON position, the radio will come on at the channel last played. The last channel played will also come on when the ON·OFF button is pushed to ON.

radio (FM/AM) band select (models without navigation system) : Pushing the RADIO AM·FM radio band select button will change the band as follows: AM → FM1 → FM2 → AM radio (SAT) band select (models without navigation system) :

The satellite radio is not available in Alaska, Hawaii and Guam.

Push the satellite band select button to select the satellite radio mode XM1, XM2 or XM3.

If another audio source is playing when the radio band select button is turned to ON, the audio source will automatically be turned off and the last radio channel played will come on.

TUNE (Tuning) :

Pushing the DISC·AUX button will switch the displays as follows:

When the stereo broadcast signal is weak, the radio will automatically change from stereo to monaural reception.

● For XM Satellite Radio

iPod姞/USB → CD/DVD → Music Box姞 → Bluetooth姞 Audio → iPod姞/USB

radio (FM/AM/SAT) band select (models with navigation system) :

Switching the display : ● Models with navigation system

● Models without navigation system Pushing the DISC button will switch the display as follows: CD → Music Box姞 → CD

Pushing the AM·FM or SAT radio band select button will change the band as follows: AM → FM1 → FM2 → XM1 → XM2 → XM3 → AM

Pushing the AUX button will switch the display as follows: USB/iPod姞 → XM1 → XM2 → XM3 → USB/iPod姞

4-54 Monitor, climate, audio, phone and voice recognition systems

● For AM and FM radio Turn the radio TUNE knob for manual tuning. Turn the radio TUNE knob to seek channels from all of the categories when any category is not selected. SEEK tuning/CATEGORY (CAT) : ● For AM and FM radio Push the SEEK·CAT or TRACK button or to tune from low to high or high to low frequencies and to stop at the next broadcasting station.

● For XM Satellite Radio Push the SEEK·CAT or TRACK button or to tune to the first channel of the next or previous category. During satellite radio reception, the following notices will be displayed under certain conditions. ● NO SIGNAL (No signal is received while the SAT tuner is connected.) ● OFF AIR (Broadcasting signed off) ● CHECK ANTENNA (Antenna connection error) ● LOADING (When the initial setting is performed) ● UPDATING (When the satellite radio subscription is not active) SCAN tuning : Push the SCAN tuning button to tune from low to high frequencies and stop at each broadcasting station/channel for 5 seconds. Pushing the button again during this 5 seconds period will stop SCAN tuning and the radio will remain tuned to that station/channel. If the SCAN tuning button is not pushed within 5 seconds, SCAN tuning moves to the next station/channel.

1 to 䊊 6 Station memory operations : 䊊

12 stations/channels can be set for the FM band (6 each for FM1 and FM2), 18 for XM radio (6 each for XM1, XM2 and XM3) and 6 stations can be set for the AM band. 1. Choose the radio band using the radio band select button. 2. Tune to the desired station/channel using the SEEK·CAT, TRACK, SCAN button or the radio TUNE knob. 3. Push and hold the desired station preset 1 to 䊊 6 until the radio mutes. button 䊊 4. The station indicator will then come on and the sound will resume. Memorizing is now complete. 5. Other buttons can be set in the same manner. If the battery cable is disconnected, or if the fuse opens, the radio memory will be erased. In that case, reset the desired stations/channels. List (AM and FM radio) (models with navigation system) : When the “List” key on the display is selected while the FM or AM radio is being played, the preset station list will be displayed.

If 1 of the 6 preset stations listed is touched and held, the current station will be stored as the new preset. Menu (XM Satellite Radio) (models with navigation system) : When the “Menu” key on the display is selected while the XM Satellite Radio is being played, the menu list will be displayed. The following items are available. ● Preset List Displays the preset channel list. If 1 of the 6 preset stations listed is touched and held, the current station will be stored as the new preset. ● Customize Channel List Selects specific channels to skip while using the TUNE, SEEK/CATEGORY or MenuCategories feature. ● Favorite Artists & Songs Stores the current artist or song that is being played. Touch the “Alert” key to be reminded when the stored artist or song is playing on a station while listening to XM.

Monitor, climate, audio, phone and voice recognition systems 4-55

● Categories Selecting a category will go to the first channel in that category as defined by XM Radio. ● Direct Tune Inputs the channel number by using a keypad. Text (models without navigation system) : When the “Text” key is selected with the INFINITI controller on the display and then the ENTER button is pushed while the satellite radio is being played, the text information listed below will be displayed on the screen.

Compact Disc (CD) player operation

Menu (models with navigation system) :

Push the ignition switch to the ACC or ON position and insert the Compact Disc (CD) into the slot with the label side facing up. The CD will be guided automatically into the slot and start playing.

When the “Menu” key on the display is selected while the CD is being played, the menu screen will be displayed. The following menu options are available.

After loading the CD, the number of tracks on the CD and the play time will appear on the display. If the radio is already operating, it will automatically turn off and the CD will play.

● CH Name

If the system has been turned off while the CD was playing, pushing the ON·OFF button will start the CD.

● Category

Do not use 3.1 in (8 cm) discs.

● Name ● Title ● Other

or

PLAY :

When the DISC·AUX or DISC (CD play) button is pushed with the system off and the CD loaded, the system will turn on and the CD will start to play. When the DISC·AUX or DISC button is pushed with the CD loaded and the radio playing, the radio will automatically be turned off and the CD will start to play.

4-56 Monitor, climate, audio, phone and voice recognition systems

● Folder List (for CD with compressed audio files) Displays the folder list. ● Track List Displays the track list. ● Play Mode Select a play mode from the following items. – Normal – 1 Folder Repeat (for CD with compressed audio files) – 1 Track Repeat – 1 Disc Random – 1 Folder Random (for CD with compressed audio files) ● Record to Music Box姞 (for CD) Select to choose specific songs on the CD to record to the Music Box姞.

● Title Text Priority (for CD) Set the priority to CDDB (Compact Disc Data Base) to acquire track information from the Gracenote Database, or set the priority to CD-TEXT to acquire the information from CDs. ● Automatic Recording (for CD) When this item is turned on, the Music Box姞 hard drive/flash memory automatically starts recording when a CD is inserted. ● Recording Quality (for CD) The larger number (132) will increase the recorded sound quality while taking up more space on the Music Box姞 leaving less room for more songs. For the details of Music Box姞, see “MUSIC BOX姞” later in this section. Text (models without navigation system) : When the “Text” key is selected in the screen using the INFINITI controller and then the ENTER button is pushed while the CD is being played, the music information below will be displayed on the screen. CD: ● Disc title

REPEAT (RPT), RANDOM (RDM) :

CD with compressed audio files: ● Folder title ● Song title

When the RPT button is pushed while the CD is played, the play pattern can be changed as follows:

● Album title

(CD)

● File title

● Artist Next/Previous Track and Fast Forward/Rewind : Push the FF or REW button for more than 1.5 seconds while a CD is being played to fast forward or rewind through the track. When the button is released, the CD will return to normal play speed. When the FF button is pushed for less than 1.5 seconds while a CD is being played, the next track on the CD will be played. When the REW button is pushed for less than 1.5 seconds within 3 seconds after the current track started playing, the previous track will be played.

(CD with compressed audio files)

CD EJECT : When the CD EJECT button is pushed with the CD loaded, the CD will be ejected. When this button is pushed while the CD is being played, the CD will be ejected. If the CD comes out and is not removed, it will be pulled back into the slot to protect it.

When the REW button is pushed for less than 1.5 seconds after 3 seconds from when the current track started playing, the beginning of the current track will be played.

● Track title

Monitor, climate, audio, phone and voice recognition systems 4-57

DVD (Digital Versatile Disc) PLAYER OPERATION (models with navigation system) Precautions Start the engine when using the DVD entertainment system. Movies will not be shown on the front display while the vehicle is in any drive position to reduce driver distraction. Audio is available when a movie is played. To view movies in the front display, stop the vehicle in a safe location, move the selector lever to the P (Park) position (Automatic Transmission models) or apply the parking brake (Manual Transmission models).

WARNING

Display settings

● The driver must not attempt to operate the DVD system or wear the headphones while the vehicle is in motion so that full attention may be given to vehicle operation.

To adjust the front display mode, push the SETTING button while the DVD is being played, select the “Others” key and then select the “Display” key.

● Do not attempt to modify the system to display a movie on the front screen while the vehicle is being driven. Doing so may distract the driver and may cause a collision and serious personal injury or death.

To adjust the display ON/OFF, brightness, tint, color and contrast, select the “Display Adjustment” key and then select each key.

CAUTION ● Only operate the DVD while the vehicle engine is running. Operating the DVD for extended periods of time with the engine OFF can discharge the vehicle battery. ● Do not allow the system to get wet. Excessive moisture such as spilled liquids may cause the system to malfunction. ● While playing VIDEO-CD media, this DVD player does not guarantee complete functionality of all VIDEO-CD formats.

4-58 Monitor, climate, audio, phone and voice recognition systems

Then you can adjust each item using the INFINITI controller. After changes have been made push the BACK button to save the setting.

and it will turn off automatically after a period of time. To turn it on again, push the DISC·AUX button again. DVD operation keys :

SAA2497

Playing a DVD DISC·AUX button : Park the vehicle in a safe location for the front seat occupants to operate the DVD drive while watching the images. Push the DISC·AUX button on the instrument panel and turn the display to the DVD mode. When a DVD is loaded, it will be replayed automatically. The operation screen will be turned on when the DISC·AUX button located on the instrument panel is pushed while a DVD is being played,

When the DVD is playing without the operation screen being shown, you may use the touch screen to select items from the displayed video. You may also use the INFINITI controller to select an item from the displayed video. When the operation screen is being shown, use the multifunction controller or touch screen to select an item from the displayed menus. PAUSE:

/

Next/Previous Chapter:

” or “ ” key to skip the Select the “ chapter(s) of the disc forward/backward. The chapters will advance/go back the number of times this key is selected. /

Commercial Skip:

This function is only for DVD-VIDEO, DVD-VR. ” or “ ” key to skip Select the “ forward or backwards by the set amount as defined in the DVD Settings menu. Top Menu :

” key to pause the DVD. To Select the “ resume playing the DVD, use the “PLAY” key. PLAY:

When the “Top Menu” key is selected in the screen while a DVD is being played, the top menu specific to each disc will be displayed. For details, see the instructions on the disc.

” key to start playing the DVD, Select the “ for example, after pausing the DVD. STOP: Select the “

” key to stop playing the DVD.

Monitor, climate, audio, phone and voice recognition systems 4-59

Hide: Hide the operation key.

Some menus specific to each disc will be shown. For details, see the instructions on the disc.

If the DVD contains different angles (such as moving images), the current image angle can be switched to another one. Select the “Angle” key. The angle will change each time the “+” side or “⫺” side is selected.

Title Search (DVD-VIDEO, DVD-VR) :

Angle Mark (DVD-VIDEO) :

The scene with the specified title will be displayed each time the “+” side or “⫺” side is selected.

When this item is turned on, an angle mark will be shown on the bottom of the screen if the scene can be seen from a different angle.

Group Search (VIDEO CD) :

Menu Skip (DVD-VIDEO) :

A scene in the specified group will be displayed each time the “+” side or “⫺” side is selected.

DVD menus are automatically configured and the contents will be played directly when the “Menu Skip” key is turned on. Note that some discs may not be played directly even if this item is turned on.

Title Menu (DVD-VIDEO) :

SAA2498

Example

DVD settings Select the “Settings” key to adjust the following settings. Key (DVD-VIDEO) : Keys for the DVD menu operation are displayed. : Move the cursor to select a DVD menu. Enter: Enter the selected menu. Move: Change the display location by moving the operation key.

Angle (DVD-VIDEO) :

10 Key Search (DVD-VIDEO, VIDEO-CD,CD-DA, DVD-VR) : Select the “10 Key Search” key to open the number entry screen. Input the number to be searched and select the “OK” key. The specified Title/Chapter or Group/Track will be played. Select No. (VIDEO-CD) : Select the “Select No.” key to open the number entry screen. Input the number to be searched and select the “OK” key. The specified scene will be played.

Back: Return to the previous screen.

4-60 Monitor, climate, audio, phone and voice recognition systems

CM Skip (DVD-VIDEO) : Select the “CM Skip” key. Choose the setting time from 15, 30 or 60 seconds by selecting the “+” side or “⫺” side. DRC (DVD-VIDEO, DVD-VR) : DRC (Dynamic Range Compression) automatically adjusts the soundtrack volume level to maintain a more even sound to the speakers.

DVD Language (DVD-VIDEO, VIDEO-CD) :

Play Mode :

Select the “DVD Language” key to open the number entry screen. Input the number corresponding to the preferred language and select the “OK” key. The DVD top menu language will be changed to the one specified.

Select the preferred play mode. PG/PL Mode (DVD-VR) : Select the “PG” or “PL” mode.

Display : To adjust the image quality of the screen, select the preferred adjustment items. Audio : SAA2973

Select the preferred language for audio. Subtitle (DVD-VIDEO, DVD-VR) :

Automatic transmission models

Select the preferred language for subtitles. Display Mode (DVD-VIDEO, VIDEO-CD, DVD-VR) : Select from the “Full”, “Wide”, “Normal” or “Cinema” modes. Title List (DVD-VR) : Select the preferred title from the list.

SAA2610

Manual transmission models

Monitor, climate, audio, phone and voice recognition systems 4-61

USB INPUT OPERATION Audio main operation Open the console lid and connect a USB 1 as illustrated. Then, push the memory 䊊 DISC·AUX or AUX button repeatedly to switch to the USB memory mode. If the system has been turned off while the USB memory was playing, pushing the ON·OFF/VOL control knob will start the USB memory. SAA2501

SAA2500

File selection (models with navigation system)

Models with navigation system

When there are both audio and movie files in the USB memory, the mode select screen is displayed. Select the preferred contents to play. When there is only one type of file, the audio or movie operation screen is displayed and starts to play. If a video file restricts the number of playbacks, a pop-up screen will appear to confirm it is ok to play. Answer yes or no as requested by the display. SAA2611

Models without navigation system

4-62 Monitor, climate, audio, phone and voice recognition systems

Audio file operation or

PLAY :

When the REW button is pushed for less than 1.5 seconds after 3 seconds from when the current track started playing, the beginning of the current track will be played.

Text (models without navigation system) : When the “Text” key is selected on the screen using the INFINITI controller and then the ENTER button is pushed while a USB memory is being played, the music information listed below will be displayed on the screen.

When the DISC·AUX or AUX button is pushed with the system off and the USB memory inserted, the system will turn on.

The INFINITI controller can also be used to select tracks when the USB memory is being played.

If another audio source is playing and a USB memory is inserted, push the DISC·AUX or AUX button repeatedly until the center display changes to the USB memory mode.

Folder selection :

● File title

To change to another folder in the USB memory, turn the folder selector or choose a folder displayed on the screen using the INFINITI controller.

● Song title

Next/Previous File and Fast Forward/Rewind : Push the FF or REW button for more than 1.5 seconds while a USB memory is being played to fast forward or rewind through a track. When the button is released, the USB memory will return to normal play speed. When the FF button is pushed for less than 1.5 seconds while a USB memory is being played, the next track on the USB memory will be played.

● Folder title

● Album Title ● Artist

REPEAT (RPT), RANDOM (RDM) : When the RPT button is pushed while the USB memory is played, the play pattern can be change as follows. To change the play mode, push the RPT button repeatedly and the mode will change as follows. Normal → 1 Folder Repeat → 1 Track Repeat → All Random → 1 Folder Random → Normal

When the REW button is pushed for less than 1.5 seconds within 3 seconds after the current track started playing, the previous track will be played.

Monitor, climate, audio, phone and voice recognition systems 4-63

● Play Mode Select the preferred play mode.

SAA2502

Menu (models with navigation system) : There are some options available during playback. Select one of the following options that are displayed on the screen if necessary. Refer to the following information for each item. ● Movie Playback Switch to the movie playback mode. This item is displayed only when a USB memory contains movie files. ● Folder List/Track List Displays the folder or track list. The “Movie Playback” key is also displayed in this list screen, and enables switching to the movie playback mode.

4-64 Monitor, climate, audio, phone and voice recognition systems

SAA2503

Movie file operation (models with navigation system) Park the vehicle in a safe location for the front seat occupants to operate the USB memory while watching the images. PLAY : When the DISC·AUX button is pushed with the system off and the USB memory inserted, the system will turn on. If another audio source is playing and a USB memory is inserted, push the DISC·AUX button repeatedly until the center display changes to the USB memory mode.

Operation keys :

Skip (Previous chapter)

To operate the USB memory, select the desired key displayed on the operation screen using the INFINITI controller. Pause ” key to pause the movie file. Select the “ To resume playing the movie file, select the ” key. “

” key to skip the chapter(s) of Select the “ the disc backward. The chapters will go back ” key is sethe number of times the “ lected. List : Select the “List” key on the movie file operation screen to display the file list.

Play SAA2504

” key to start playing a movie Select the “ file, for example, after pausing a movie file. STOP Select the “ file.

Example Settings :

” key to stop playing a movie

Skip (Next chapter) ” key to skip the chapter(s) of Select the “ the disc forward. The chapters will advance the number of times the ENTER button is pushed.

Select the “Settings” key to adjust the following settings. ● Audio File Playback Switch to the audio playback mode. This item is displayed only when the USB memory contains the audio files. ● Play Mode Select the “Normal” or “1 Track Repeat” play mode.

Monitor, climate, audio, phone and voice recognition systems 4-65

● 10 Key Search Select the “10 Key Search” key to open the number entry screen. Input the number to be searched and select the “OK” key. The specified folder/file will be played. ● Display To adjust the image quality of the screen, select the preferred adjustment items. ● DRC DRC (Dynamic Range Compression) automatically adjusts the soundtrack volume level to maintain a more even sound to the speakers. ● Audio Select the preferred language for audio. ● Subtitle Select the preferred language for subtitle. ● Display Mode

BLUETOOTH姞 STREAMING AUDIO (models with navigation system)

Regulatory information

Your INFINITI is equipped with Bluetooth姞 Streaming Audio. If you have a compatible Bluetooth姞 device with streaming audio (A2DP profile), you can set up the wireless connection between your Bluetooth姞 device and the invehicle audio system. This connection allows you to listen to the audio from the Bluetooth姞 device using your vehicle speakers. It also may allow basic control of the device for playing and skipping audio files using the AVRCP Bluetooth profile. All Bluetooth姞 Devices do not have the same level of controls for AVRCP. Please consult the manual for your Bluetooth姞 Device for more details.

– CAUTION: To maintain compliance with FCC’s RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations.

Once your Bluetooth姞 device is connected to the in-vehicle audio system, it will automatically reconnect whenever the device is present in the vehicle and you select Bluetooth姞 Audio from your audio system. You do not need to manually reconnect for each usage.

IC Regulatory information :

Select the “Normal”, “Wide”, “Cinema” or “Full” mode.

4-66 Monitor, climate, audio, phone and voice recognition systems

FCC Regulatory information :

– Operation is subject to the following two conditions: 1) This device may not cause interference and 2) This device must accept any interference, including interference that may cause undesired operation of the device

– Operation is subject to the following two conditions: 1) This device may not cause interference, and 2) This device must accept any interference, including interference that may cause undesired operation of the device.

– This Class B digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations. Bluetooth trademark: Bluetooth姞 is a trademark owned by Bluetooth SIG, Inc. and licensed to Clarion Co., Ltd.

SAA2505

Connecting procedure

SAA2506

2. Select the “Connect Bluetooth” key.

1. Push the SETTING button and select the “Bluetooth” key.

Monitor, climate, audio, phone and voice recognition systems 4-67

SAA2507

SAA3005

SAA3006

3. A confirmation screen will be displayed. Select “No”.

4. Choose a PIN code to use with the compatible Bluetooth姞 audio device using the number input screen. The PIN code will need to be entered into the Bluetooth姞 audio device after step 5. Select the “OK” key.

5. The standby message screen will appear. Operate the compatible Bluetooth姞 audio device. For the connecting procedure of the audio device, see the Bluetooth姞 audio instructions.

Note: Selecting “Yes” will only connect the hands free phone portion of a Bluetooth姞 device.

4-68 Monitor, climate, audio, phone and voice recognition systems

When the connecting is completed, the screen will return to the Bluetooth姞 setup display.

DISC·AUX button : When the DISC·AUX button is pushed with the system off and the Bluetooth姞 audio device connected, the system will turn on. If another audio source is playing and the Bluetooth姞 audio device is connected, push the DISC·AUX button repeatedly until the display changes to the Bluetooth姞 audio mode. Next/Previous Track and Fast Forward/Rewind : SAA2510

Audio main operation Push the ignition switch to the ACC or ON position. Then, push the DISC·AUX button repeatedly to switch to the Bluetooth姞 audio mode. If the system has been turned off while the Bluetooth姞 audio device was playing, pushing the ON·OFF/VOL control knob will start the Bluetooth姞 audio device. Some of the functions, such as pause, change track, fast forward, etc., may not be used depending on the paired Bluetooth姞 device.

Push the FF or REW button for more than 1.5 seconds while a Bluetooth姞 file is being played to fast forward or rewind through the track. When the button is released, the Bluetooth姞 audio device will return to the normal play speed. When the FF button is pushed for less than 1.5 seconds while the Bluetooth姞 audio device is being played, the next track will be played. When the REW button is pushed for less than 1.5 seconds within 3 seconds after the current track started playing, the previous track will be played. When the REW button is pushed for less than 1.5 seconds after 3 seconds from when the current track started playing, the beginning of the current track will be played.

The INFINITI controller can also be used to select tracks when the Bluetooth姞 audio is playing. REPEAT (RPT), RANDOM (RDM) : To change the play mode, push the button repeatedly and the mode changes as follows. Normal → Shuffle All Tracks → Shuffle Group → Repeat 1 Track → Repeat All Tracks → Repeat Group → Normal Operation keys : To operate a Bluetooth姞 audio device, select a key displayed on the operation screen using the INFINITI controller. Play ” key to start playing when Select the “ pausing. Select this key again to pause the audio play. Pause ” key to pause the Bluetooth姞 Select the “ audio device. Select this key again to resume playing.

Monitor, climate, audio, phone and voice recognition systems 4-69

Play Mode :

Connected Devices :

The play mode setting display will appear when the “Menu” key is selected.

Registered devices are shown on the list. Select a Bluetooth姞 device from the list, the following options will be available.

Choose the preferred play mode from the following items.

● Select

● Shuffle

Select “Select” to connect the selected device to the vehicle. If there is a different device currently connected, the selected device will replace the current device.

Choose “Shuffle OFF”, “Shuffle All Tracks” and “Shuffle Group”. ● Repeat

● Edit

Choose from “Repeat OFF”, “Repeat 1 Track”, “Repeat All Tracks” and “Repeat Group”.

SAA2511

Bluetooth姞 settings

Rename the selected Bluetooth姞 device using the keypad displayed on the screen. (See “HOW TO USE TOUCH SCREEN (models with navigation system)” earlier in this section.)

To set up the Bluetooth姞 device system to the preferred settings, push the SETTING button and select the “Bluetooth” key.

● Delete

Bluetooth :

Edit Bluetooth Info :

If this setting is turned off, the connection between the Bluetooth姞 devices and the invehicle Bluetooth姞 module will be canceled.

Change the name broadcasted by this system over Bluetooth姞. Change the PIN code that is entered when connecting a hands free device to this system.

Connect Bluetooth : Connects to the Bluetooth姞 device. See “Connecting procedure” earlier in this section. Up to 5 devices can be registered.

4-70 Monitor, climate, audio, phone and voice recognition systems

Delete the selected Bluetooth姞 device.

IPOD姞 PLAYER OPERATION Connecting iPod姞

Replace Connected Phone : Replace the Bluetooth姞 connection with a connected Bluetooth姞 cellular phone. For details about Hands-Free Phone System, see “BLUETOOTH姞 HANDS-FREE PHONE SYSTEM (models with navigation system)” later in this section.

Open the console lid and connect the iPod姞 cable to the USB connector. If compatible, the battery of the iPod姞 is charged while the connection to the vehicle.

SAA2974

Automatic transmission models

Depending on the version of the iPod姞, the display on the iPod姞 shows an INFINITI or Accessory Attached screen when the connection is completed. When the iPod姞 is connected to the vehicle, the iPod姞 music library can only be operated by the vehicle audio controls. * iPod姞 is a trademark of Apple Inc., registered in the U.S. and other countries.

Compatibility The following models are available: Models with navigation system : ● Fifth generation iPod姞 (version 1.2.3 or later) ● iPod Classic姞 (version 1.1.1 or later) ● First generation iPod touch姞 (version 2.0.0 or later) SAA2426

Manual transmission models

● Second generation iPod touch姞 (version 1.2.3 or later) ● First generation iPod nano姞 (version 1.3.1 or later)

Monitor, climate, audio, phone and voice recognition systems 4-71

● Second generation iPod nano姞 (version 1.1.3 or later) ● Third generation iPod nano姞 (version 1.1 or later) ● Fourth generation iPod nano姞 (version 1.0.2 or later) Models without navigation system : ● Fifth generation iPod姞 (firmware version 1.3) ● First generation iPod Classic姞 (firmware version 1.1.2 PC) ● Second generation iPod Classic姞 (firmware version 2.0 PC) ● First generation iPod touch姞 (firmware version 2.1) ● Second generation iPod touch姞 (firmware version 2.1.1) ● First generation iPod nano姞 (firmware version 1.3.1) ● Second generation iPod nano姞 (firmware version 1.1.3)

Audio main operation Push the ignition switch to the ACC or ON position. Then, push the DISC·AUX or DISC button repeatedly to switch to the iPod姞 mode. If the system has been turned off while the iPod姞 was playing, pushing the ON·OFF button will start the iPod姞. or

PLAY :

When the DISC·AUX or AUX button is pushed with the system off and the iPod姞 connected, the system will turn on. If another audio source is playing and the iPod姞 is connected, push the DISC·AUX or AUX button repeatedly until the center display changes to the iPod姞 mode. Interface : The interface for iPod姞 operation shown on the vehicle center display is similar to the iPod姞 interface. Use the INFINITI controller and the ENTER or BACK button to play the iPod姞 with your favorite settings.

● Third generation iPod nano姞 (firmware version 1.1 PC) ● Third generation iPhone姞 (firmware version 2.1) Make sure that the iPod姞 version is updated.

4-72 Monitor, climate, audio, phone and voice recognition systems

The following items can be chosen from the menu list screen. For further information about each item, see the iPod姞 Owner’s Manual. ● Now Playing ● Playlists ● Artists ● Albums ● Songs ● Podcasts ● Genres ● Composers ● Audiobooks ● Shuffle Songs The following touch-panel buttons shown on the screen are also available: ●

: returns to the previous screen.

●

: plays/pauses the music selected.

Next/Previous Track and Fast Forward/Rewind : Push the FF or REW button for more than 1.5 seconds while the iPod姞 is playing to fast forward or rewind through a track. When the button is released, the iPod姞 will return to the normal play speed.

REPEAT (RPT), RANDOM (RDM) : When the RPT button is pushed while a track is being played, the play pattern can be changed as follows:

MUSIC BOX姞 (if so equipped) The Music Box姞 hard drive/flash memory audio system can store songs from CDs being played. The system has a 9.3 gigabyte (GB) storage capacity in models with navigation system or a 2.0 GB (800 MB music storage capacity) in models without navigation system.

When the FF button is pushed for less than 1.5 seconds while the iPod姞 audio device is being played, the next track will be played.

The following CDs can be recorded in the “Music Box姞” hard drive/flash memory audio system.

When the REW button is pushed for less than 1.5 seconds within 3 seconds after the current track started playing, the previous track will be played.

● CDs that contain uncompressed audio files

When the REW button is pushed for less than 1.5 seconds after 3 seconds from when the current track started playing, the beginning of the current track will be played. The INFINITI controller can also be used to select tracks when the iPod姞 is playing.

● Hybrid Compact Disc Digital Audio (Hybrid CD-DA) specification in Super Audio CDs ● Compact Disc Digital Audio (CD-DA) specification in CD-Extras ● First session of multisession disc Extreme temperature conditions [below ⫺4°F (⫺20°C) and above 158°F (70°C)] could affect the performance of the hard drive/flash memory. NOTE: If the hard drive/flash memory needs to be replaced due to a malfunction, all stored music data will be erased.

Monitor, climate, audio, phone and voice recognition systems 4-73

Recording CDs 1. Operate the audio system to play a CD. For the details of playing CDs, see “Compact Disc (CD) player operation” earlier in this section. 2. Select the “Start REC” or “REC” key. NOTE: ● The system starts playing and recording the 1st track on the CD when the “Start REC” or “REC” key is selected. SAA2513

Models with navigation system

● The recording process can be stopped at any time. All tracks that were played before the CD was stopped are stored.

SAA2514

Models with navigation system

● Individual tracks can be deleted from the hard drive/flash memory after the CD is recorded. ● The order of the tracks may not be changed while recording.

SAA2612

Models without navigation system

4-74 Monitor, climate, audio, phone and voice recognition systems

SAA2613

Models without navigation system

If the title information of the track being recorded is stored either on the hard drive/flash memory or in the CD, the title is automatically displayed on the screen. For title acquisition from the hard drive/flash memory, music recognition technology and related data are provided by Gracenote姞.

Stopping recording : To stop the recording, select the “Stop REC” key button by touching the screen or using the INFINITI controller. If the CD is ejected, the audio system is turned off or the ignition switch is pushed to the OFF position, the recording also stops.

If a track is not recorded successfully due to the mark is displayed beCD skipping, the hind the track number. The “Music Box姞” hard drive/flash memory cannot perform recording under the following conditions.

SAA2515

Models with navigation system

● There is not enough space on the hard drive/flash memory ● The number of albums reaches the maximum of 500. ● The number of tracks reaches the maximum of 3,000. Automatic recording : If the “Automatic Recording” function is turned to ON, recording starts when a CD is inserted. (See “Music Box姞 settings” later in this section.)

SAA2614

Models without navigation system

Monitor, climate, audio, phone and voice recognition systems 4-75

Playing recorded songs Select the “Music Box姞” audio system by using one of the following methods. ● Push the audio source switch on the steering wheel repeatedly until the center display changes to the Music Box姞 mode. (See “STEERING-WHEEL-MOUNTED CONTROLS FOR AUDIO” later in this section.) ● Push the DISC·AUX or DISC button repeatedly until the center display changes to the Music Box姞 mode. ● Give voice commands. (See “INFINITI VOICE RECOGNITION SYSTEM (models with navigation system)” later in this section.) Stopping playback : The system stops playing when: a. another mode (radio, CD, DVD, USB memory or iPod) is selected. b. the audio system is turned off.

Next/Previous Track and Fast Forward/Rewind : Push the FF or REW button for more than 1.5 seconds while a track is being played to fast forward or rewind through the track. When the button is released, the track will return to the normal play speed. When the FF button is pushed for less than 1.5 seconds while a track is being played, the next track will be played. When the REW button is pushed for less than 1.5 seconds within 3 seconds after the current track started playing, the previous track will be played. When the REW button is pushed for less than 1.5 seconds after 3 seconds from when the current track started playing, the beginning of the current track will be played. The INFINITI controller can also be used to select tracks when a track is being played.

c. the ignition switch is pushed to the LOCK position.

4-76 Monitor, climate, audio, phone and voice recognition systems

Play mode selection : The TUNE/FOLDER knob will skip from album to album unless it is playing “All Songs” from the Music Library menu. When playing “All Songs”, the knob will change the track instead of the album. The upper right corner of the main screen will indicate if the TUNE knob is changing by track or album. REPEAT (RPT), RANDOM (RDM) : When the RPT·RDM button is pushed while a track is being played, the play pattern can be changed as follows: (Normal) → 1 Album Repeat → 1 Track Repeat → 1 Album Random → All Random → (Normal) Tag Track (models with navigation system) : Select “Tag Track” key on the screen when a track is being played. A menu will show the 5 available playlists. Select one of the playlists to add the current song to that playlist. If a playlist is not selectable (text is grayed out), it means the song already exists in that playlist.

There are some options available by selecting the “Menu” key on the screen during playback. Select one of the following options that are displayed on the screen if necessary. Now Playing (models with navigation system) : Displays a track list to choose a preferred track for playback.

Models with navigation system

There are some options available during playback. Select one of the following options that are displayed on the screen if necessary. ● Artists Play tracks by an artist whose music is currently being played. The artists are sorted in alphabetical order. ● Albums Play tracks in each album. The albums are sorted in alphabetical order. ● All Songs Play tracks from all recorded tracks. The tracks are sorted in alphabetical order.

SAA2725

Models without navigation system

Displays the Playlist and edits the Playlist if necessary. Select the “Edit” key. The following items are available ● Add Current Songs Add a current track to the Playlist.

Music Library :

SAA2516

My Playlists (models with navigation system) :

● Add Songs by Album Displays a list of albums in alphabetical order. Selecting an album displays all of the tracks in the album. Select tracks from the list to add to the Playlist. ● Add Songs by Artist Displays a list of artists in alphabetical order. Selecting an artist displays all of the tracks by the artist. Select tracks from the list to add to the Playlist. ● Edit Songs Order Reorder the tracks in the Playlist by selecting a track and specifying the order.

● Genres Play tracks by a selected genre.

Monitor, climate, audio, phone and voice recognition systems 4-77

● Edit Name Edit the name of the Playlist using the keypad displayed on the screen. (See “HOW TO USE INFINITI CONTROLLER” earlier in this section.) ● Delete Songs Delete tracks in the Playlist by selecting from the displayed song list. Play Mode (models with navigation system) : Choose the preferred play mode from the following items. ● Normal ● 1 Album Repeat ● 1 Track Repeat ● 1 Playlist Random ● 1 Artist Random

Edit Music Information : Displays the following information about the Music Box姞 hard drive/flash memory to edit if necessary. ● Edit Information of Current Song (models with navigation system) Edit the “Track”, “Artist” and “Genre” information of the current track using the keypad displayed on the screen. (See “HOW TO USE TOUCH SCREEN (models with navigation system)” earlier in this section.) Edit the “Mode” information by selecting from the list. ● Edit Information by Album (models with navigation system) Edit the displayed name and of a selected album and the track information in the album.

● 1 Album Random ● 1 All Track Random ● 1 All Random

4-78 Monitor, climate, audio, phone and voice recognition systems

● Update Gracenote from USB Device (models with navigation system)/Transfer Titles from USB (models without navigation system) Update the in-vehicle Gracenote Database using a USB memory. Search the title from a information acquired on the Internet. Visit www.InfinitiUSA.com/music-update/ for details. ● Transfer Missing Titles to USB Transfer the information of an album recorded without titles to a USB memory. Visit www.InfinitiUSA.com/music-update/ for details. ● Update Gracenote from HDD Search the title using the database on the hard drive/flash memory.

Music Box姞 settings To set the Music box姞 hard drive/flash memory to your preferred settings, select the “Menu ” key during playback, and the “Music Box Settings ” key with the INFINITI controller, and then push the ENTER button. Music Box姞 Used/Free Space : Information about “Saved Album”, “Saved Track” and “Remaining Time” is displayed. SAA2517

Models with navigation system

CDDB Version (models with navigation system)/Gracenote Database Version (models without navigation system) : The version of the built-in Gracenote Database is displayed.

Gracenote NOTE:

Automatic Recording :

● The information contained in the Gracenote Database is not fully guaranteed.

When this item is turned on, the Music Box姞 hard drive/flash memory automatically starts recording when a CD is inserted.

● The service of the Gracenote Database on the Internet may be stopped without prior notice for maintenance.

Delete Songs from Music Box姞 : Deletes the current song, selected songs or albums by choosing from the list, or all songs/albums in the Music Box姞. Recording Quality : Set the recording quality of 105 kbps or 132 kbps. The default is set to 105 kbps.

SAA2438

Models without navigation system

End-User License Agreement USE OF THIS PRODUCT IMPLIES ACCEPTANCE OF THE TERMS BELOW. Gracenote姞 MusicID姞 Terms of Use This application or device contains software from Gracenote, Inc. of Emeryville, California (“Gracenote”). The software from Gracenote (the “Gracenote Software”) enables this application to perform disc and/or file identification and obtain music-related information, including name, artist, track, and title information

Monitor, climate, audio, phone and voice recognition systems 4-79

(“Gracenote Data”) from online servers or embedded databases (collectively, “Gracenote Servers”) and to perform other functions. You may use Gracenote Data only by means of the intended End-User functions of this application or device. You agree that you will use Gracenote Data, the Gracenote Software, and Gracenote Servers for your own personal non-commercial use only. You agree not to assign, copy, transfer or transmit the Gracenote Software or any Gracenote Data to any third party. YOU AGREE NOT TO USE OR EXPLOIT GRACENOTE DATA, THE GRACENOTE SOFTWARE, OR GRACENOTE SERVERS, EXCEPT AS EXPRESSLY PERMITTED HEREIN. You agree that your non-exclusive license to use the Gracenote Data, the Gracenote Software, and Gracenote Servers will terminate if you violate these restrictions. If your license terminates, you agree to cease any and all use of the Gracenote Data, the Gracenote Software, and Gracenote Servers. Gracenote reserves all rights in Gracenote Data, the Gracenote Software, and the Gracenote Servers, including all ownership rights. Under no circumstances will Gracenote become liable for any payment to you for any information that you provide.

You agree that Gracenote, Inc. may enforce its rights under this Agreement against you directly in its own name. The Gracenote service uses a unique identifier to track queries for statistical purposes. The purpose of a randomly assigned numeric identifier is to allow the Gracenote service to count queries without knowing anything about who you are. For more information, see the web page for the Gracenote Privacy Policy for the Gracenote service. The Gracenote Software and each item of Gracenote Data are licensed to you “AS IS.” Gracenote makes no representations or warranties, express or implied, regarding the accuracy of any Gracenote Data from in the Gracenote Servers. Gracenote reserves the right to delete data from the Gracenote Servers or to change data categories for any cause that Gracenote deems sufficient. No warranty is made that the Gracenote Software or Gracenote Servers are error-free or that functioning of Gracenote Software or Gracenote Servers will be uninterrupted. Gracenote is not obligated to provide you with new enhanced or additional data types or categories that Gracenote may provide in the future and is free to discontinue its services at any time.

4-80 Monitor, climate, audio, phone and voice recognition systems

GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NON-INFRINGEMENT. GRACENOTE DOES NOT WARRANT THE RESULTS THAT WILL BE OBTAINED BY YOUR USE OF THE GRACENOTE SOFTWARE OR ANY GRACENOTE SERVER. IN NO CASE WILL GRACENOTE BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES OR FOR ANY LOST PROFITS OR LOST REVENUES. Copyright : Music recognition technology and related data are provided by Gracenote姞. Gracenote is the industry standard in music recognition technology and related content delivery. For more information, please visit www.gracenote.com. CD and music-related data from Gracenote, Inc., copyright © 2000-2009 Gracenote. Gracenote Software, copyright © 2000-2009 Gracenote. This product and service may practice one or more of the following U.S. Patents: #5,987,525; #6,061,680; #6,154,773, #6,161,132, #6,230,192, #6,230,207, #6,240,459, #6,330,593, and other patents issued or pending. Some services supplied under license from Open Globe, Inc. for U.S. Patent: #6,304,523.

● A new disc may be rough on the inner and outer edges. Remove the rough edges by rubbing the inner and outer edges with the side of a pen or pencil as illustrated.

Gracenote and CDDB are registered trademarks of Gracenote. The Gracenote logo and logotype, and the “Powered by Gracenote” logo are trademarks of Gracenote.

USB memory ● Never touch the terminal portion of the USB memory. ● Do not place heavy objects on the USB memory.

SAA0451

CD/DVD/USB MEMORY CARE AND CLEANING CD/DVD ● Handle a CD/DVD by its edges. Never touch the surface of the disc. Do not bend the disc.

● Do not store the USB memory in highly humid locations. ● Do not expose the USB memory to direct sunlight. ● Do not spill any liquids on the USB memory. Refer to the USB memory Owner’s Manual for the details.

● Always place the discs in the storage case when they are not being used. ● To clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth. Do not wipe the disc using a circular motion. Do not use a conventional record cleaner or alcohol intended for industrial use.

Monitor, climate, audio, phone and voice recognition systems 4-81

3. Volume control switch 4. Back switch

STEERING-WHEEL-MOUNTED CONTROLS FOR AUDIO Menu control switch (models with navigation system) or audio tuning switch (models without navigation system)

SAA1534

SAA1506

While the display is showing a MAP (navigation systems only), STATUS or Audio screen, tilt the switch upward or downward to select a station, track, CD or folder. For most audio sources, tilting the switch up/down for more than 1.5 seconds provides a different function than tilting up/down for less than 1.5 seconds. AM and FM radio : ● Tilting up/down for less than 1.5 seconds will scroll up or down through the preset station.

Models with navigation system

Models without navigation system 1. Audio source switch 2. Menu control switch (models with navigation system) or audio tuning switch (models without navigation system)

4-82 Monitor, climate, audio, phone and voice recognition systems

● Tilting up/down for more than 1.5 seconds will seek up or down to the next station. ● Pushing the menu control switch will show the list of preset stations.

XM Satellite Radio :

DVD (models with navigation system) :

Music Box姞 (if so equipped) :

● Tilting up/down for less than 1.5 seconds will scroll up or down through the preset channel.

● Tilting up/down for less than 1.5 seconds will scroll up or down through the track number.

● Tilting up/down for less than 1.5 seconds will scroll up or down through the track number.

● Tilting up/down for more than 1.5 seconds will go to the next or previous category.

● Tilting up/down for more than 1.5 seconds will scroll up or down through the title number.

● Tilting up/down for more than 1.5 seconds will increase/decrease the album (folder) number (if playing compressed audio files).

● Pushing the menu control switch will select an item from the DVD display.

● Pushing the menu control switch will show the Music Box姞 Menu.

● When the transparent operation menu appears, the switch will control the menu.

Bluetooth姞 Audio (models with navigation system) :

USB :

● Tilting up/down for less than 1.5 seconds will scroll up or down through the track number.

● Pushing the menu control switch will show the XM Menu. iPod姞 : ● Tilting up/down for less than 1.5 seconds will scroll up or down through the track number. ● Tilting up/down for more than 1.5 seconds will skip to the next or previous index. ● Pushing the menu control switch will show the iPod Menu. CD : ● Tilting up/down for less than 1.5 seconds will scroll up or down through the track number. ● Tilting up/down for more than 1.5 seconds will scroll up or down through the folder number (if playing compressed audio files).

● Tilting up/down for less than 1.5 seconds will scroll up or down through the track number. ● Tilting up/down for more than 1.5 seconds will scroll up or down through the folder number. ● Pushing the menu control switch will show the USB Menu.

BACK switch (models with navigation system) Push this switch to go back to the previous screen or cancel the selection if it is not completed.

Volume control switches Push the upper (+) or lower (⫺) side switch to increase or decrease the volume.

● Pushing the menu control switch will show the CD Menu.

Monitor, climate, audio, phone and voice recognition systems 4-83

Audio source switch

CAUTION ● To avoid damaging or deforming the antenna, be sure to remove the antenna under the following conditions.

Push the audio source switch to change the mode as follows. ● Models with navigation system AM → FM → SAT → CD/DVD → Music Box姞 → USB/iPod姞 → Bluetooth姞 Audio

– The vehicle enters an automatic car wash. – The vehicle enters a garage with a low ceiling.

● Models without navigation system AM → FM → CD → Music Box姞 → USB/iPod姞 → SAT

– The vehicle is covered with a car cover.

SAA2374

ANTENNA Trunk mounted antenna Removing the antenna : You can remove the antenna if necessary. Hold the bottom of the antenna and remove by turning counterclockwise.

4-84 Monitor, climate, audio, phone and voice recognition systems

● Always properly tighten the antenna rod during installation. Otherwise, the antenna rod may break during vehicle operation.

CAR PHONE OR CB RADIO When installing a car phone or a CB radio in your INFINITI, be sure to observe the following cautions, otherwise the new equipment may adversely affect the electronic control modules and electronic control system harness.

WARNING ● A cellular telephone should not be used while driving so full attention may be given to vehicle operation. Some jurisdictions prohibit the use of cellular telephones while driving. ● If you must make a call while your vehicle is in motion, the hands-free cellular phone operational mode (if so equipped) is highly recommended. Exercise extreme caution at all times so full attention may be given to vehicle operation. ● If a conversation in a moving vehicle requires you to take notes, pull off the road to a safe location and stop your vehicle before doing so.

BLUETOOTH姞 HANDS-FREE PHONE SYSTEM (models with navigation system) CAUTION ● Keep the antenna as far away as possible from the electronic control modules. ● Keep the antenna wire more than 8 in (20 cm) away from the electronic control system harness. Do not route the antenna wire next to any harness. ● Adjust the antenna standing-wave ratio as recommended by the manufacturer. ● Connect the ground wire from the CB radio chassis to the body. ● For details, consult an INFINITI retailer.

WARNING ● Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. ● If you find yourself unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop your vehicle before doing so.

CAUTION To avoid draining the vehicle battery, use a phone after starting the engine. Your INFINITI is equipped with Bluetooth姞 Hands-Free Phone System. If you are an owner of a compatible Bluetooth姞 enabled cellular phone, you can set up the wireless connection between your cellular phone and the in-vehicle phone module. With Bluetooth姞 wireless technology, you can make or receive a telephone call with your cellular phone in your pocket. Once a cellular phone is connected to the in-vehicle phone module, no phone connecting procedure is required anymore. Your phone is automatically connected with the in-vehicle

Monitor, climate, audio, phone and voice recognition systems 4-85

phone module when the ignition switch is pushed to the ON position with the registered cellular phone turned on and carried in the vehicle. You can register up to 5 different Bluetooth姞 cellular phones in the in-vehicle phone module. However, you can talk on only one cellular phone at a time. The INFINITI Voice Recognition system supports the phone commands, so dialing a phone number using your voice is possible. For more details, see “INFINITI VOICE RECOGNITION SYSTEM (models with navigation system)” later in this section; page 4-109. Before using the Bluetooth姞 Hands-Free Phone System, refer to the following notes. ● Set up the wireless connection between a compatible cellular phone and the in-vehicle phone module before using the Bluetooth姞 Hands-Free Phone System. ● Some Bluetooth姞 enabled cellular phones may not be recognized by the in-vehicle phone module. Please visit www.InfinitiUSA.com/bluetooth for a recommended phone list.

● You will not be able to use a hands-free phone under the following conditions: – Your vehicle is outside of the telephone service area. – Your vehicle is in an area where it is difficult to receive radio waves; such as in a tunnel, in an underground parking garage, behind a tall building or in a mountainous area. – Your cellular phone is locked in order not to be dialed. ● When the radio wave condition is not ideal or ambient sound is too loud, it may be difficult to hear the other person’s voice during a call. ● Immediately after the ignition switch is pushed to the ON position, it may be impossible to receive a call for a short period of time. ● Do not place the cellular phone in an area surrounded by metal or far away from the in-vehicle phone module to prevent tone quality degradation and wireless connection disruption.

4-86 Monitor, climate, audio, phone and voice recognition systems

● While a cellular phone is connected through the Bluetooth姞 wireless connection, the battery power of the cellular phone may discharge quicker than usual. ● If the Bluetooth姞 Hands-Free Phone System seems to be malfunctioning, please visit www.InfinitiUSA.com/bluetooth for troubleshooting help. ● Some cellular phones or other devices may cause interference or a buzzing noise to come from the audio system speakers. Storing the device in a different location may reduce or eliminate the noise. ● Refer to the cellular phone Owner’s Manual regarding the telephone pairing procedure specific to your phone, battery charging, cellular phone antenna, etc. ● The antenna display on the monitor will not coincide with the antenna display of some cellular phones. ● Keep the interior of the vehicle as quiet as possible to hear the caller’s voice clearly as well as to minimize its echoes. ● If reception between callers is unclear, adjusting the incoming or outgoing call volume may improve the clarity.

REGULATORY INFORMATION FCC Regulatory information – CAUTION: To maintain compliance with FCC’s RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. – Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device

Bluetooth姞 trademark: Bluetooth姞 is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Clarion Co., Ltd.

VOICE COMMANDS You can use voice commands to operate various Bluetooth姞 Hands-Free Phone System features using the INFINITI Voice Recognition system. For more details, see “INFINITI VOICE RECOGNITION SYSTEM (models with navigation system)” later in this section; page 4-109.

IC Regulatory information – Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. – This Class B digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations.

SAA1772

CONTROL BUTTONS 1) PHONE button /PHONE SEND 2) TALK

button

Monitor, climate, audio, phone and voice recognition systems 4-87

PHONE SELECTION Up to 5 cellular phones can be registered to the system. To switch to connect another cellular phone, push PHONE button and select the “Connected Phones” key. The registered cellular phones are shown on the list. If you select a cellular phone that is different from the one currently connected, the newly selected phone will be connected to the system.

VEHICLE PHONEBOOK SAA2519

CONNECTING PROCEDURE 1. Push the PHONE button or the button, and select the “Connect Phone” key.

SAA2520

2. When a PIN code appears on the screen, operate the compatible Bluetooth姞 cellular phone to enter the PIN code. The connecting procedure of the cellular phone varies according to each cellular phone. See the cellular phone Owner’s Manual for the details. You can also visit www.InfinitiUSA.com/bluetooth or call INFINITI Consumer Affairs Department for instructions on pairing INFINITI recommended cellular phones. When the connection process is completed, the screen will return to the Phone menu display.

4-88 Monitor, climate, audio, phone and voice recognition systems

This vehicle has two phonebooks available for hands-free use. Depending on the phone, the system may automatically download the entire cell phone’s phonebook into the “Handset Phonebook”. For the details about downloading a phonebook, see “PHONE SETTING” later in this section. If a phonebook does not automatically download, the vehicle phonebook may be set for up to 1,000 entries. This phonebook allows the recording of a name to speak while using voice recognition.

SAA2521

SAA2522

SAA2523

1. Push the PHONE button and select the “Vehicle Phonebook” key. 2. Select the “Add New” key at the top of the screen.

3. Choose the method for entering the phonebook entry. For this example, select “Enter Number by Keypad”. 4. Enter the digits and select the “OK” key. (See “HOW TO USE TOUCH SCREEN (models with navigation system)” earlier in this section.)

5. Select the “Voicetag” key to record a name to speak when using the INFINITI Voice Recognition system. 6. Select the “Store” key and prepare to speak the name after the tone. 7. When the voicetag is successfully saved, select the “OK” key to save the phonebook entry. 8. After the phonebook entry is saved, it will show a screen that is ready to call the number. Press the BACK button to return to the Vehicle Phonebook.

Monitor, climate, audio, phone and voice recognition systems 4-89

There are different methods to input a phone number. Select one of the following options instead of “Enter Number by Keypad” in step 3. – Copy from Call History The system will show a list of incoming, outgoing or missed calls that were downloaded from the connected cellular phone (depending on the phone’s compatibility). Select one of these entries to save in the vehicle phonebook. – Copy from the Handset The system will show the connected cellular phone’s phonebook that was downloaded (depending on the phone’s compatibility). Select one of these entries to save in the vehicle phonebook.

SAA2620

SAA2523

Editing the Vehicle Phonebook

The following editing items are available:

1. Push the PHONE button and select the “Vehicle Phonebook” key. 2. Select the desired entry from the displayed list. 3. Select the “Edit” key. 4. Select the desired item to change.

● Entry # Changes the displayed number of the selected entry. ● Name Edit the name of the entry using the keypad displayed on the screen. ● Number Edit the phone number using the keypad displayed on the screen. ● Type Select an icon from the icon list.

4-90 Monitor, climate, audio, phone and voice recognition systems

● Voicetag Confirm and store the voicetag. Voicetags allow easy dialing using the INFINITI Voice Recognition system. (See “INFINITI VOICE RECOGNITION SYSTEM (models with navigation system)” later in this section.) To delete an entry, select the “Delete” key at step 3.

SAA2524

MAKING A CALL To make a call, follow this procedure. 1. Push the PHONE button on the instrument button on the steering panel or the wheel. The “PHONE” screen will appear on the display. 2. Select the “Handset Phonebook” key on the “PHONE” menu. 3. Select the desired entry from the list. 4. Confirm the correct entry by selecting for the correct number from the list.

SAA2621

5. Select the “Call” key to start dialing the number. There are different methods to make a call. Select one of the following options instead of “Handset Phonebook” in step 2 above. ● Vehicle Phonebook Select an entry stored in the Vehicle’s Phonebook. ● Call History Select an outgoing, incoming or missed call downloaded from your cell phone (depending on your phone’s compatibility).

Monitor, climate, audio, phone and voice recognition systems 4-91

● Dial Number

There are some options available when receiving a call. Select one of the following displayed on the screen.

Input the phone number manually using the keypad displayed on the screen. (See “HOW TO USE TOUCH SCREEN (models with navigation system)” earlier in this section.)

● Answer Accept an incoming call to talk. ● Hold Call Put an incoming call on hold. ● Reject Call Reject an incoming call. SAA2525

RECEIVING A CALL When you hear a phone ring, the display will change to the incoming call mode. To receive a call, perform one of the following procedures listed below. a) Select the “Answer” key. b) Push the PHONE button on the instrument panel. button on the steering c) Push the wheel.

4-92 Monitor, climate, audio, phone and voice recognition systems

To finish the call, perform one of the following procedures listed below. a) Select the “Hang up” key. b) Push the PHONE button on the instrument panel. button on the steering c) Push the wheel.

● Keypad Using the touch tone, send digits to the connected party for using services such as voicemail. ● Cancel Mute This will appear after “Mute” is selected. Mute will be canceled. ● Switch Call*

SAA3587

DURING A CALL There are some options available during a call. Select one of the following displayed on the screen if necessary. ● Hang up Finish the call. ● Use Handset Transfer the call to the cellular phone. ● Mute Mute your voice to the person.

Select “Switch call” to switch caller. By selecting “Hang up”, you can end a call and can speak to a caller who is on hold again. * This function may not be usable, depending on the model of phone. To adjust the person’s voice to be louder or quieter, push the volume control switch (+ or ⫺) on the steering wheel or turn the volume control knob on the instrument panel while talking on the phone. This adjustment is also available in the SETTING mode.

SAA2527

PHONE SETTING To set up the Bluetooth姞 Hands-Free Phone System to your preferred settings, push the SETTING button on the instrument panel and select the “PHONE” key.

Edit Vehicle Phonebook To edit the vehicle phonebook, use the same procedure as described in “VEHICLE PHONEBOOK” earlier in this section.

Delete Phonebook The vehicle phonebook entries can be deleted all at the same time or one by one.

Monitor, climate, audio, phone and voice recognition systems 4-93

Download Handset Phonebook Download the contacts registered in a Bluetooth姞 cellular phone. Availability of this function depends on each cellular phone. The memory downloading procedure from the cellular phone also varies according to each cellular phone. See cellular phone Owner’s Manual for details. When “Auto Download” is active, the system will automatically re-download the entries registered in the phone everytime it is paired with the vehicle, even after you delete the entries from your vehicle’s Handset Memory.

● Vehicle Ringtone When this function is activated, a specific ringtone that is different from the cellular phone will sound when receiving a call.

Auto Download When this item is activated, the phonebook of a hands-free phone is automatically downloaded at the same time that the hands-free phone is connected. When this item is active, the system will automatically re-download the entries registered in the connected phone even if you attempt to delete the entries.

Volume The following kinds of phone volume can be set. Pushing the PHONE button and selecting the “Volume” key can also operate the same settings. ● Ringtone/Incoming Call/Outgoing Call To increase or decrease the volume, select the “Ringtone”, “Incoming Call” or “Outgoing Call” key and adjust it with the INFINITI controller. ● Automatic Hold When this function is activated, an incoming phone call is automatically held.

4-94 Monitor, climate, audio, phone and voice recognition systems

TROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved. Symptom

Solution 1. Ensure that the command is valid. (See “INFINITI VOICE RECOGNITION SYSTEM (models with navigation system)” later in this section; page 4-109.) 2. Ensure that the command is spoken after the tone.

System fails to interpret the command correctly.

3. Speak clearly without pausing between words and at a level appropriate to the ambient noise level in the vehicle. 4. Ensure that the ambient noise level is not excessive (for example, windows open or defroster on). NOTE: If it is too noisy to use the phone, it is likely that the voice commands will not be recognized. 5. If more than one command was said at a time, try saying the commands separately.

The system consistently selects the wrong voicetag.

1. Ensure that the voicetag requested matches what was originally stored. (See “VEHICLE PHONEBOOK” earlier in this section.) 2. Replace one of the names being confused with a new name.

Monitor, climate, audio, phone and voice recognition systems 4-95

BLUETOOTH姞 HANDS-FREE PHONE SYSTEM (models without navigation system) WARNING ● Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. ● If you find yourself unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop your vehicle before doing so.

CAUTION To avoid draining the vehicle battery, use a phone after starting the engine. Your vehicle is equipped with Bluetooth姞 Hands-Free Phone System. If you are an owner of a Bluetooth姞 enabled cellular phone, you can set up the wireless connection between your cellular phone and the in-vehicle phone module. With Bluetooth姞 wireless technology, you can make or receive a telephone call with your cellular phone in your pocket. Once your cellular phone is paired to the invehicle phone module, no phone connecting procedure is required. Your phone is automatically connected with the in-vehicle phone mod-

ule when the ignition switch is pushed to the “ON” position with the registered cellular phone turned on and carried in the vehicle. You can register up to 5 different Bluetooth姞 cellular phones in the in-vehicle phone module. However, you can talk on only one cellular phone at a time. When a call is active, the audio system and microphone (located in the ceiling in front of the rearview mirror) are used for the handsfree communications. If the audio system is being used at the time, the audio mode will mute and will stay muted until the active call is ended. The INFINITI Voice Recognition system supports the phone commands, so dialing a phone number using your voice is possible. Before using the Bluetooth姞 Hands-Free Phone System, refer to the following notes. ● Set up the wireless connection between a cellular phone and the in-vehicle phone module before using the Bluetooth姞 HandsFree Phone System. ● Some Bluetooth姞 enabled cellular phones may not be recognized by the in-vehicle phone module.

4-96 Monitor, climate, audio, phone and voice recognition systems

● You will not be able to use a hands-free phone under the following conditions: – Your vehicle is outside of the telephone service area. – Your vehicle is in an area where it is difficult to receive radio waves; such as in a tunnel, in an underground parking garage, behind a tall building or in a mountainous area. – Your cellular phone is locked in order not to be dialed. ● When the radio wave condition is not ideal or ambient sound is too loud, it may be difficult to hear the other person’s voice during a call. ● Immediately after the ignition switch is pushed to the “ON” position, it may be impossible to receive a call for a short period of time. ● Do not place the cellular phone in an area surrounded by metal or far away from the in-vehicle phone module to prevent tone quality degradation and wireless connection disruption. ● While a cellular phone is connected through the Bluetooth姞 wireless connection, the battery power of the cellular phone may discharge quicker than usual.

● If the Bluetooth姞 Hands-Free Phone System seems to be malfunctioning, please contact an INFINITI retailer. ● Some cellular phones or other devices may cause interference or a buzzing noise to come from the audio system speakers. Storing the device in a different location may reduce or eliminate the noise. ● Refer to the cellular phone Owner’s Manual regarding the telephone pairing procedure specific to your phone, battery charging, cellular phone antenna, etc. ● The antenna display on the monitor will not coincide with the antenna display of some cellular phones.

● This wireless hands free car kit is based on Bluetooth姞 technology, – Frequency: 2402 MHz - 2480 MHz – Output Power: 4.14 dBm E.I.R.P – Modulation: ␲/4DQPSK

FHSS

GFSK

8DPSK,

REGULATORY INFORMATION Bluetooth姞 is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Visteon Corporation.

– Number of Channel: 79 – This wireless equipment can’t be used for any services related to safety because there is the possibility of radio interference.

● Keep the interior of the vehicle as quiet as possible to hear the caller’s voice clearly as well as to minimize its echoes. ● If reception between callers is unclear, adjusting the incoming or outgoing call volume may improve the clarity.

Monitor, climate, audio, phone and voice recognition systems 4-97

VOICE RECOGNITION SYSTEM

Using system

You can also use the Bluetooth姞 hands-free phone system with Voice Recognition System.

Initialization :

INFO ● The available voice commands are only applicable to the relevant language set in the LANGUAGE setting screen. (See “HOW TO USE SETTING BUTTON” earlier in this section.) SAA1582

CONTROL BUTTONS 1. PHONE SEND button Push the button to initiate a VR session or answer an incoming call. You can also use the button to skip through system feedback and to enter commands during a call. button 2. PHONE END Push the button to cancel a VR session or end a call.

When the ignition switch is pushed to the ON position, Voice Recognition System is initialized, which may take up to one minute. When completed, the system is ready to accept voice comswitch on the steering wheel mands. If the is pushed before the initialization completes, the system will not accept any command.

● If the vehicle is in motion, some commands may not be available so full attention may be given to vehicle operation.

Before starting :

Manual command selection

● Keep the interior of the vehicle as quiet as possible. Close the windows to eliminate the surrounding noises (traffic noises, vibration sounds, etc.), which may prevent the system from recognizing the voice commands correctly.

Commands can be selected manually. While the commands are displayed on the screen, select a command by operating the Tune switch, and button. Once a command then push the is manually selected, the voice command function is cancelled. To return to voice command button to cancel the mode, push the current operation, and then perform the first procedure of voice command.

To get the best performance out of the Voice Recognition System, observe the following:

● Wait until a tone sounds before speaking a command. ● Speak a voice command within 5 seconds after the beep sound. If no voice command is given, the system will ask you for a number. If no further command is given, the session ends. ● Speak in a natural voice without pausing between words.

4-98 Monitor, climate, audio, phone and voice recognition systems

4. The system acknowledges the command and announces the next set of available commands. 5. After the tone sounds, speak the phone number. 6. When you have finished speaking the phone number, the system repeats it back and announces the available commands. 7. After system responds, speak “Dial” and the system dials the spoken numbers. SAA2643

Giving voice command: 1. Push and release the on the steering wheel.

switch located

SAA2574

2. A list of commands appears on the screen, and the system announces, “Please say a command after the beep. Available commands are: Call, Phonebook, Recent Calls, Connect Phone or Help”. 3. After the tone sounds and the icon on the to , screen changes from speak a command. See the “List of voice commands” later in this section for the voice command list. Speak “Call” for example. INFO Voice commands cannot be recognized as long as the screen icon is not in the com. mand recognition mode

Operating tips : ● Voice commands cannot be accepted when . the icon is ● If the command is not recognized, the system announces, “Please say again”. Repeat the command in a clear voice. switch or the BACK button ● Push the once to return to the previous screen. ● If you want to cancel the command, push the switch. The message “Voice input is canceled” will be announced. If you want to adjust the volume of the system feedback, push the volume control buttons [+] or [⫺] on the steering wheel or use the audio system volume knob while the system is making an announcement.

Monitor, climate, audio, phone and voice recognition systems 4-99

How to speak commands :

Personal vocabulary (voicetags) :

The Voice Recognition System requires a certain way to speak voice commands. Speak normally and clearly in the direction of the microphone (located in front of the rearview mirror). Every digit of the number must be spoken individually and in a normal manner. The hands-free mode will work best when the telephone number is spoken in blocks of three to five digits. After each spoken block is terminated, the system will repeat the three to five digits and wait for you to speak the next digit or block of digits required for the telephone number.

Voice Recognition System is equipped with the function called “voicetags”, which can be associated with the phone number and name in the phonebook. Using the voice tag will automatically generate a speed dial to the registered number.

You can call the identified number using the following command: “Dial” followed by the voice tag.

If the system cannot understand your command, repeat it according to the recommendations mentioned in “How to speak commands” earlier in this section. 4. If the given name (voice tag) is correct, the phone system will dial the number registered for “John”.

See “List of voice commands” later in this section for the appropriate commands that can be spoken for the hands-free mode system.

Dialling a name with a voice tag :

INFO

It is possible to call up a name via a voice tag instead of a number, provided the name and number of your correspondent has been previously stored in the phonebook.

To end the voice command phase at any stage switch once of the procedure, push the in order to activate the cancel command.

Example: In order to initiate a call, speak “Phonebook”. INFO ● If you are controlling the telephone system by voice command for the first time or do not know the appropriate voice command, speak “Help”. The system announces the available commands. ● When you speak numbers, you can speak both “zero” or “oh” for “0”.

See “PHONEBOOK REGISTRATION” earlier in this section.

Dial via a voice tag, according to the following procedure. 1. Push the

switch.

2. The system replies “please say a command after the beep. Available commands are: Call, Phonebook, Recent Calls, Connect Phone or Help”.

4-100 Monitor, climate, audio, phone and voice recognition systems

3. Give your instructions to the system by saying: “Dial John” for example (“John” must have been previously set as a voice tag for John’s phone number) or “Dial One” if John is classified as one in the phonebook.

List of voice commands: COMMAND

ACTION

“Call/Dial” “”

Dials the specified .

“Call/Dial” “Redial”

Dials the last number.

“Call” “Number” “”

Dials the specified .

“Phonebook” “”

Displays the specified in the phonebook.

“Phonebook” “List Names”

Displays all the names in the phonebook.

“Phonebook” “Transfer Entry”

Transfers the phonebook data to the system.

“Phonebook” “Delete Entry”

Deletes the phonebook registered in the system.

“Connect Phone” “Add Phone”

Connects a cellular phone to the system.

“Connect Phone” “Select Phone”

Selects a registered cellular phone.

“Connect Phone” “Delete Phone”

Deletes a registered cellular phone.

“Connect Phone” “Bluetooth Off”

Turns the Bluetooth姞 connection off.

“Connect Phone” “Replace Phone”

Changes the registered order of the cellular phones.

“Connect Phone” “Delete Phone” “All Phones”

Deletes all registered cellular phones.

“Connect Phone” “Delete Phone” “List Phones”

Selects a registered cellular phone and deletes it.

Monitor, climate, audio, phone and voice recognition systems 4-101

SAA2575

PAIRING PROCEDURE Up to 5 cellular phones can be registered. 1. Push the button on the steering wheel. The system announces the available commands. 2. Speak: “Connect Phone”. The system acknowledges the command and announces the next set of available commands.

SAA2576

SAA2577

3. Speak: “Add Phone”. The system acknowledges the command and asks you to initiate connecting from the phone handset.

4. When asked to enter a PIN code to connect a Bluetooth姞 cellular phone, enter the code “1234”.

INFO: The Add Phone command is not available when the vehicle is moving.

4-102 Monitor, climate, audio, phone and voice recognition systems

The code is always “1234” regardless of the number of phones paired. The connecting procedure of a cellular phone varies according to each cellular phone. See the cellular phone Owner’s Manual for more information.

SAA2578

5. The system asks the user to speak a name for the phone. Speak: “Yes”. The system acknowledges the command and registers the cellular phone. If the name is too long or too short, the system tells the user, then prompts the user for a name again. Also, if more than one phone is connected and the name sounds too much like a name already used, the system tells the user, then prompts the user for name again.

SAA2579

SAA2580

PHONEBOOK REGISTRATION

MAKING A CALL

When the cellular phone is connected to the in-vehicle module, the data stored in the cellular phone such as phonebook, outgoing call logs, incoming call logs and missed call logs is automatically transferred and registered to the system.

To make a call, follow the procedures below.

The availability of this function depends on each cellular phone. The copying procedure also varies according to each cellular phone. See cellular phone Owner’s Manual for more information. Up to 1,000 phone numbers per registered cellular phone can be stored in the phonebook.

1. Push the button on the steering wheel. A tone will sound. 2. Speak: “Call”. The system acknowledges the command and announces the next set of available commands. 3. Speak the registered person’s name. The system acknowledges the command and announces the next set of available commands. 4. Speak: “Yes”. The system acknowledges the command and makes the call. 5. Once the call has ended, press the button on the steering wheel.

Monitor, climate, audio, phone and voice recognition systems 4-103

● “Mute on/off” — Use the Mute command to mute the user’s voice so the other party cannot hear it.

RECEIVING A CALL When the ring tone is heard, press the button on the steering wheel.

Use the mute command again to unmute the user’s voice.

Once the call has ended, press the button on the steering wheel.

● “Transfer Handset” — Use the Transfer Handset command to transfer the call from the Bluetooth姞 Hands-Free Phone System to a cellular phone when privacy is desired. The system announces, “Transfer Handset. The call is transferred to the handset only.” The system then ends the VR session.

NOTE: To reject a call when the ring tone is heard, press the button on the steering wheel. SAA2581

DURING A CALL During a call there are several command opbutton on the tions available. Press the steering wheel to mute the receiving voice and enter commands. ● “(digits)” — Use the Send command to enter numbers during a call. For example, if directed to dial an extension by an automated system: Speak: “Sending one two three four.” The system acknowledges the command and sends the tones associated with the numbers. The system then ends the VR session and returns to the call.

4-104 Monitor, climate, audio, phone and voice recognition systems

The Transfer Call command can also be issued again to return to a hands-free call through the vehicle. ● “Help” — The system announces the available commands. NOTE: If the other party ends the call or the cellular phone network connection is lost while the Mute feature is on, the Mute feature may need to be reset to “off.”

● Number When prompted by the system, speak the number to call. ● Redial Use the Redial command to call the last number of outgoing calls. The system acknowledges the command, repeats the number and begins dialing. If a redial number does not exist, the system announces, “There is no number to redial” and ends the VR session. SAA2582

PHONE SETTINGS Call ● (a name) If there are entries stored in the Phone Book, a number associated with a name and location can be dialed. See “Phone book registration” in this section to learn how to store entries. When prompted by the system, say the name of the phone book entry to call. The system acknowledges the name. If there are multiple locations associated with the name, the system asks the user to choose the location.

● Callback

SAA2583

Use the Callback command to call the last number in incoming calls. The system acknowledges the command, repeats the number and begins dialing. If an incoming call number does not exist, the system announces, “There is no number to call back” and ends the VR session. ● Help The system announces the available commands.

Phonebook ● (a name) Use the name command to seek the name and locations registered in the phonebook in alphabetical order. When the system acknowledges the alphabet the user spoke, the system announces all registered names and locations beginning with that alphabet. Playback of the list can be stopped at any time by pressing a button on the steering wheel. The system ends the VR session.

Once the name and location are confirmed, the system begins the call.

Monitor, climate, audio, phone and voice recognition systems 4-105

● List Names Use the List Names command to hear the names and locations registered in the phonebook. When the system acknowledges the command, the system announces all voicetags registered in the system. Playback of the list can be stopped at any time by pressing a button on the steering wheel. The system ends the VR session. ● Transfer Entry Use the Transfer Entry command to transfer the phonebook data stored in a cellular phone to the system. The system acknowledges the command and asks the user to initiate a transfer from the phone handset. The new contact phone number will be transferred from the cellular phone via a Bluetooth姞 communication link.

The system confirms the name, location and number. The system then asks if the user would like to store another location for the same name. If the user does not wish to store another location, the system ends the VR session. ● Delete Entry Use the Delete Entry command to delete a specific number or all numbers in the phonebook. The system announces the names of the phone numbers already stored in the system. The system then gives the option to delete a specific number or all numbers. Once the user chooses to delete a number or all numbers, the system asks the user to confirm. ● Help The system announces the available commands.

The transfer procedure varies according to each cellular phone. See the cellular phone Owner’s Manual for more information. The system repeats the number and prompts the user for the next command. After entering numbers, choose “Store.”

SAA2584

Recent Calls ● Incoming Use the Incoming command to make a call viewing the list of incoming calls. ● Missed Use the Missed command to make a call viewing the list of missed calls. ● Outgoing Use the Outgoing command to make a call viewing the list of outgoing calls. ● Redial Use the Redial command to dial the last outgoing call.

4-106 Monitor, climate, audio, phone and voice recognition systems

● Callback

already been connected to the vehicle system, the system announces the name that the phone is already using. The connecting procedure will then be cancelled.

Use the Callback command to dial the last incoming call. ● Help

The Add Phone command is not available when the vehicle is moving.

The system announces the available commands.

● Select Phone

SAA2585

Use the Select Phone command to select a phone of lesser priority when two or more phones connected with Bluetooth姞 HandsFree Phone System are in the vehicle at the same time. The system asks the user to name the phone and confirm the selection.

Connect Phone ● Add Phone Use the Pair Phone command to connect a compatible phone to the Bluetooth姞 HandsFree Phone System.

Once the selection is confirmed, the selected phone remains active until the ignition switch is placed in the OFF position or a new phone is selected.

When asked to enter a PIN code to connect a Bluetooth姞 cellular phone, enter the code “1234”. The code is always “1234” regardless of the number of phones connected. Up to 5 phones can be connected. If the user tries to connect a sixth phone, the system announces that the user must first delete one phone or replace an existing phone. If the user tries to connect a phone that has

Monitor, climate, audio, phone and voice recognition systems 4-107

● Delete Phone Use the Delete Phone command to delete a specific phone or all phones from Bluetooth姞 Hands-Free Phone System. The system announces the names of the phones already paired with the system and their priority level. The system then gives the option to delete a specific phone, all phones or listen to the list again. Once the user chooses to delete a phone or all phones, the system asks the user to confirm. NOTE: When the user deletes a phone, the associated phone book for that phone will also be deleted. ● Replace Phone Use the Replace Phone command to change the priority level of the active phone. The priority level determines which phone is active when more than one paired Bluetooth姞 phone is in the vehicle. The system states the priority level of the active phone and asks for a new priority level (1, 2, 3, 4, 5). If the new priority level is already being used for another phone, the two phones will swap priority levels.

For example, if the current priority levels are: Priority Level 1 = Phone A Priority Level 2 = Phone B Priority Level 3 = Phone C and you change the priority level of Phone C to Level 1, then: Priority Level 1 = Phone C Priority Level 2 = Phone B Priority Level 3 = Phone A ● Bluetooth On/Off Use the Bluetooth On/Off command to turn on/off Bluetooth姞 Hands-Free Phone System. ● Help The system announces the available commands.

VOICE ADAPTATION MODE The Voice Adaptation mode allows up to two users with different dialects to train the system to improve recognition accuracy. By repeating a number of commands, the users can create a voice model of their own voice that is stored in the system. The system is capable of storing a different voice adaptation model for each connected phone.

4-108 Monitor, climate, audio, phone and voice recognition systems

Training procedure 1. Position the vehicle in a reasonably quiet outdoor location. 2. Sit in the driver’s seat with the engine running, the parking brake on, and the transmission in Park. 3. Press the

button.

4. Speak: “Help”. The system acknowledges the command and announces the next set of available commands. 5. Speak: ⬙Voice Adaptation⬙. The system acknowledges the command and displays the voice adaptation mode screen. 6. Voice memory A or memory B is selected automatically. If both memory locations are already in use, the system will prompt you to overwrite one. Follow the instructions provided by the system. 7. When preparation is complete and you are button. ready to begin, press the 8. The voice adaptation mode will be explained. Follow the instructions provided by the system. 9. When training is finished, the system will tell you an adequate number of phrases have been recorded.

INFINITI VOICE RECOGNITION SYSTEM (models with navigation system) 10. The system will ask you to say your name. Follow the instructions to register your name. 11. The system will announce that voice adaptation has been completed and the system is ready. The voice adaptation mode will stop if: ● The button is pressed in voice adaptation mode. ● The vehicle is driven during voice adaptation mode. ● The ignition switch is placed in the OFF or LOCK position.

INFINITI Voice Recognition allows hands-free operation of the Phone, Navigation, Information and Audio systems in one of two modes, Standard Mode or Alternate Command Mode. In Standard Mode, commands that are available are always shown on the display and announced by the system. You can complete your desired operation by simply following the prompts given by the system. (See “INFINITI VOICE RECOGNITION STANDARD MODE” later in this section for details.) For advanced operation, you can use the Alternate Command Mode. (See “INFINITI VOICE RECOGNITION ALTERNATE COMMAND MODE” later in this section for details.) When this mode is active, an expanded list of commands can be switch, spoken after pushing the TALK and the voice command menu prompts are turned off. Review the expanded command list, which is available when this mode is active. Note that in this mode the recognition success rate may be affected as the number of available commands and the ways of speaking each command are increased.

To improve the recognition success rate when Alternate Command Mode is active, try using the Speaker Adaptation Function available in that mode. Otherwise, it is recommended that Alternate Command Mode be turned off and Standard Mode be used for the best recognition performance. For the voice commands for the navigation system, refer to the Navigation System Owner’s Manual of your vehicle. The voice recognition system cannot be operated when the retractable hard top is not closed.

INFINITI VOICE RECOGNITION STANDARD MODE The following section is applicable when the Standard Mode is activated. The Standard Mode enables you to complete the desired operation by simply following the prompts that appear on the display and also are announced by the system.

To switch one mode to another, see each mode description later in this section.

Monitor, climate, audio, phone and voice recognition systems 4-109

SAA2529

Activating Standard Mode When the Alternate Command Mode is active, perform the following steps to switch to the Standard Mode. 1. Push the SETTING button on the instrument panel. 2. Select the “Others” key. 3. Select the “Voice Recognition” key.

SAA2530

SAA2531

4. Select the “Alternate Command Mode” key. 5. The indicator turns off and the Standard Mode activates.

1. Push the INFO button on the instrument panel. 2. Select the “Others” key. 3. Select the “Voice Recognition” key. 4. Select the “User Guide” key. 5. Select a preferred item.

Displaying user guide If you use the INFINITI Voice Recognition system for the first time or you do not know how to operate it, you can display the User Guide for confirmation. You can confirm how to use voice commands by accessing a simplified User Guide, which contains basic instructions and tutorials for several voice commands.

4-110 Monitor, climate, audio, phone and voice recognition systems

You can skip steps 1 and 3 above if you say “Help”.

Available items :

Tutorials on the operation of the INFINITI Voice Recognition system

● Getting Started

If you choose “Using the Address Book”, “Finding a Street Address” or “Placing Calls”, you can view tutorials on how to perform these operations using INFINITI Voice Recognition.

Describes the basics of how to operate the INFINITI Voice Recognition system. ● Let’s Practice Mode that allows practicing by following the instructions of the system voice. ● Using the Address Book Tutorial for entering a destination by using the Address Book. ● Finding a Street Address (if so equipped) Tutorial for entering a destination by street address. ● Placing Calls Tutorial for making a phone call by voice command operation. ● Help on Speaking Displays useful tips of speaking for correct command recognition by the system.

SAA2532

Getting Started Before using the INFINITI Voice Recognition system for the first time, you can confirm how to use commands by viewing the Getting Started section of the User Guide. 1. Select the “Getting Started” key. 2. You can confirm the page by scrolling the screen using the INFINITI controller.

Note that the Command List feature is only available when Alternate Command Mode is active.

Monitor, climate, audio, phone and voice recognition systems 4-111

before the initialization completes, the display will show the message: “System not ready.” or a beep sounds.

Before starting To get the best recognition performance from INFINITI Voice Recognition, observe the following:

SAA2534

SAA2533

Let’s Practice

Useful tips for correct operation

This mode helps learn how to use the INFINITI Voice Recognition system. 1. Select the “Let’s Practice” key. 2. After the message screen appears, push switch on the steering the TALK wheel. 3. Speak the displayed number after the tone. The evaluation screen will be displayed and the result can be confirmed.

You can display useful speaking tips to help the system recognize your voice commands correctly. Select “Help on Speaking” to start display.

USING THE SYSTEM Initialization When the ignition switch is pushed to the ON position, INFINITI Voice Recognition is initialized, which may take up to one minute. When completed, the system is ready to accept voice switch is pushed commands. If the TALK

4-112 Monitor, climate, audio, phone and voice recognition systems

● The interior of the vehicle should be as quiet as possible. Close the windows to eliminate the surrounding noises (traffic noise and vibration sounds, etc.), which may prevent the system from correctly recognizing the voice commands. ● Wait until the tone sounds before speaking a command. ● Speak in a natural conversational voice without pausing between words. ● If the air conditioner is set to “Auto”, the fan speed is automatically lowered so that your commands can be recognized more easily.

Operating tips : ● Say a command after the tone. ● Commands that are available are always shown on the display and spoken through voice menu prompts. Commands other than those that are displayed are not accepted. Please follow the prompts given by the system. ● If the command is not recognized, the system announces, “Please say again”. Repeat the command in a clear voice. SAA1588

Giving voice commands 1. Push the TALK steering wheel.

switch located on the

SAA2535

2. A list of commands appears on the screen, and the system announces, “Would you like to access Phone, Navigation, Information, Audio or Help?”. 3. After the tone sounds and the icon on the to , screen changes from speak a command. Selecting the “Practice” key will start the practice mode. See “Let’s Practice” earlier in this section. 4. Continue to follow the voice menu prompts and speak after the tone sounds until your desired operation is completed.

● Push the BACK button once to return to the previous screen. ● To exit the voice recognition system, push switch. The mesand hold the TALK sage, “Voice canceled” will be announced. ● To skip the voice guidance function and give the command immediately, press the TALK switch to interrupt the system. Remember to speak after the tone. ● If you want to adjust the volume of the system feedback, push the volume control buttons [+] or [⫺] on the steering switch or use the audio system volume knob while the system is making an announcement.

Selecting the “Help ” key can display the detailed information of the each command.

Monitor, climate, audio, phone and voice recognition systems 4-113

How to speak numbers : INFINITI Voice Recognition requires a certain way to speak numbers when giving voice commands. Refer to the following examples. General rule Only single digits 0 (zero) to 9 can be used. (For example, if you would like to say 500, “five zero zero” can be used, but “five hundred” cannot.)

When speaking a house number, speak the number “0” as “zero”. If the letter “o (Oh)” is included in the house number, it will not be recognized as the number “0 (zero)” even if you speak “oh” instead of “zero”. Please speak “zero” for the number “0 (zero)”, “oh” for the letter “o (oh)”.

Examples ● 1-800-662-6200 – “One eight zero zero six six two six two zero zero” Improving Recognition of Phone numbers You can improve the recognition of phone numbers by saying the phone number in three groups of numbers. For example, when you try to call 800-662-6200, say “eight zero zero” first, and the system will then ask you for the next three digits. Then, say “six six two”. After recognition, the system will then ask for the last four digits. Say, “six two zero zero”. Using this method of phone digit entry can improve recognition performance.

4-114 Monitor, climate, audio, phone and voice recognition systems

Command List Category Command: Command

Action

Phone

Operates the Phone function

Navigation

Operates the Navigation function

Information

Displays the vehicle Information function

Audio

Operates the Audio function.

Help

Displays User Guide

● Phone Command: Command

Action

Dial Number

Makes a call to a spoken phone number up to 10 digits.

Vehicle Phonebook

Makes a call to a contact that is stored in the Vehicle Phonebook.

Handset Phonebook

Makes a call to a contact that is stored in the mobile phone.

Call history

Makes a call to the incoming call number.

Incoming Calls Outgoing Calls

Makes a call to the dialed number.

Missed Calls

Makes a call to the Missed calls number.

International Call

Makes an international call by allowing more than 10 digits to be spoken.

Change Number

Corrects the recognized phone number (available during phone number entry).

Monitor, climate, audio, phone and voice recognition systems 4-115

● Navigation Command: Command

Action

Home

Sets a route to your home that is stored in the Address Book.

Address

Searches for a location by the street address specified, and sets a route to the location.

Places

Sets a route to a facility near the current vehicle location.

Address Book

Searches for stored information in the Address Book.

Previous Destinations

Sets a route to a previous destination.

● Information Command: Command

Action

Fuel Economy

Displays fuel economy information.

Maintenance

Displays maintenance information.

Traffic Information

Turns the traffic information system ON and OFF.

Where am I?

Displays your current location.

● Audio Command: Command

Action

AM

Turns to the AM band, selecting the station last played.

FM

Turns to the FM band, selecting the station last played.

XM

Turns to the XM Satellite band, selecting the channel last played.

Music Box姞

Turns on the “Music Box姞” hard drive audio system.

CD

Starts to play a CD.

4-116 Monitor, climate, audio, phone and voice recognition systems

● General Commands Command

Action

Go back

Corrects the last recognition result to return to the previous screen

Exit

Cancels Voice Recognition

Monitor, climate, audio, phone and voice recognition systems 4-117

Voice command examples To use the INFINITI Voice Recognition function, speaking one command is sometimes sufficient, but at other times it is necessary to speak two or more commands. As examples, some additional basic operations by voice commands are described here. For navigation system commands, see the separate Navigation System Owner’s Manual.

SAA1588

SAA2535

Example 1 - Placing a call to the phone number 800-662-6200: 1. Push the TALK switch located on the steering wheel.

2. The system announces, “Would you like to access Phone, Navigation, Information, Audio or Help?” 3. Speak “Phone”.

4-118 Monitor, climate, audio, phone and voice recognition systems

SAA2536

4. Speak “Dial Number”.

SAA2537

SAA2538

Selecting the “Manual Controls” key switches the screen to the keypad to input the phone number manually.

6. The system announces, “Please say the next three digits or dial, or say change number.” 7. Speak “6 6 2”.

5. Speak “8 0 0”.

Monitor, climate, audio, phone and voice recognition systems 4-119

Note : ● You can also speak “800-662-6200” (10 continuous digits) or “662-6200” (7 continuous digits), if the area code is not necessary. However, the 3-3-4 digit grouping is recommended for improved recognition. (See “How to speak numbers” earlier in this section.) ● You can only say a phone number using the 3-3-4 grouping, 7 digits, and 10 digits using this command. Please use the “International Call” command for all other formats. SAA2539

SAA2540

8. The system announces, “Please say the last four digits” or say change number. 9. Speak “6 2 0 0”.

10. The system announces, “Dial or Change Number?” 11. Speak “Dial”. 12. The system makes a call to 800-6626200.

● If you say “Change Number” during phone number entry, the system will automatically request that you repeat the number using the 3-3-4 format. In this case please say the area code first and then follow the prompts. ● Do not add a “1” in front of the area code when speaking phone numbers. ● If the system does not recognize your command, please try repeating the command using a natural voice. Speaking too slow or too loudly may further decrease recognition performance.

4-120 Monitor, climate, audio, phone and voice recognition systems

SAA1588

SAA2535

Example 2 - Placing an international call to the phone number 011-81-111-222-3333: 1. Push the TALK switch located on the steering wheel.

2. The system announces, “Would you like to access Phone, Navigation, Information, Audio or Help?” 3. Speak “Phone”.

SAA2536

4. Speak “International Call”.

Monitor, climate, audio, phone and voice recognition systems 4-121

INFINITI VOICE RECOGNITION ALTERNATE COMMAND MODE The following section is applicable when Alternate Command Mode is activated. When Alternate Command Mode is activated, an expanded list of commands can be used after switch. In this mode, pressing the TALK available commands are not fully shown on the display or prompted. Review the expanded command list when this mode is active. See examples of Alternate Command Mode screens. SAA2541

5. Speak “011811112223333”.

SAA2542

6. Speak “Dial”. 7. System makes a call to 011-81-111-2223333. Note : Any digit input format is available in the International Number input process.

4-122 Monitor, climate, audio, phone and voice recognition systems

Please note that in this mode the recognition success rate may be affected as the number of available commands and ways of speaking each command are increased. To improve the recognition success rate, try using the Speaker Adaptation Function available in that mode. (See “Speaker adaptation function (for Alternate Command Mode)” later in this section.) Otherwise it is recommended that Alternate Command Mode be turned OFF and Standard Mode be used for the best recognition performance.

SAA2529

Activating Alternate Command Mode When the Standard Mode is active, perform the following steps to switch to the Alternate Command Mode. 1. Push the SETTING button on the instrument panel. 2. Highlight the “Others” key. 3. Highlight the “Voice Recognition” key.

SAA2543

SAA2544

4. Highlight the “Alternate Command Mode” key. 5. The confirmation message is displayed on the screen. Push the “OK” key to activate the Alternate Command Mode.

1. Push the INFO button on the instrument panel. 2. Select the “Others” key. 3. Select the “Voice Recognition” key. 4. Select the “Command List” key.

Displaying command list If you are controlling the system by voice commands for the first time or do not know the appropriate voice command, perform the following procedure for displaying the voice command list (available only in Alternate Command Mode).

Monitor, climate, audio, phone and voice recognition systems 4-123

SAA2545

5. Select a category from the list.

SAA2546

6. Select an item. 7. If necessary, scroll the screen using the INFINITI controller to view the entire list. 8. Press the BACK button to return to the previous screen.

4-124 Monitor, climate, audio, phone and voice recognition systems

Command List Phone Commands: Command

Action

Dial Number

Makes a call to a spoken phone number.

Vehicle Phonebook

Makes a call to a contact that is stored in the Vehicle Phonebook.

Handset Phonebook Call History

Makes a call to a contact that is stored in the mobile phone. Incoming Calls

Makes a call to the incoming call number.

Outgoing Calls

Makes a call to the dialed number.

Missed Calls

Makes a call to the Missed calls number.

International Call

Makes an international call by allowing more than 10 digits to be spoken.

Call

Makes a call to a contact that is stored in either Vehicle Phonebook or Handset Phonebook. Please say “Call” followed by a stored name.

Navigation Commands: Command

Action

Home

Sets a route to your home that is stored in the Address Book.

Address

Searches for a location by the street address specified, and sets a route to the location.

Places

Sets a route to a facility near the current vehicle location.

Address Book

Searches for stored information in the Address Book.

Previous Destinations

Sets a route to a previous destination.

Previous Start Point

Sets a route to a previous starting point.

Delete Destination

Deletes a destination.

Monitor, climate, audio, phone and voice recognition systems 4-125

Information Commands: Command

Action

Fuel Economy

Displays fuel economy information.

Maintenance

Displays maintenance information.

Where am I?

Displays your current location.

Traffic Information

Turns the traffic information system ON and OFF.

Weather Information

Displays weather information.

Weather Map

Displays a weather map.

Audio Commands: Command

Action

Music Box姞

Turns on the “Music Box姞” hard drive audio system.

CD

Starts to play a CD.

FM

Turns to the FM band, selecting the station last played.

AM

Turns to the AM band, selecting the station last played.

XM

Turns to the XM Satellite Radio band, selecting the channel last played.

USB

Turns on the USB memory.

Bluetooth Audio

Turns on the Bluetooth姞 audio player.

4-126 Monitor, climate, audio, phone and voice recognition systems

Help Commands: Command Command List

Action

Navigation Commands

Displays the navigation command list.

Phone Commands

Displays the phone command list.

Audio Commands

Displays the audio command list.

Information Commands

Displays the information command list.

Help Commands

Displays the help command list.

User Guide

Displays the User Guide.

Speaker Adaptation

The system can memorize the voices of up to three persons.

General Commands: Command

Action

Go back

Corrects the last recognition result to return to the previous screen

Exit

Cancels Voice Recognition

Monitor, climate, audio, phone and voice recognition systems 4-127

4. Highlight the “User Guide” key using the INFINITI controller and push the ENTER button. 5. Highlight an item using the INFINITI controller and push the ENTER button. Available items : ● Getting Started Describe the basics of how to operate the INFINITI Voice Recognition system. SAA2547

Displaying user guide You can confirm how to use voice commands by accessing a simplified User Guide, which contains basic instructions and tutorials for several voice commands. 1. Push the INFO button on the instrument panel. 2. Select the “Others” key using the INFINITI controller and push the ENTER button. 3. Highlight the “Voice Recognition” key using the INFINITI controller and push the ENTER button.

● Let’s Practice Mode that allows practicing by following the instructions of the system voice. ● Using the Address Book Refer to Navigation System Owner’s Manual. ● Finding a Street Address (if so equipped) Refer to Navigation System Owner’s Manual. ● Placing Calls Tutorial for making a phone call by voice command operation. ● Help on Speaking Displays useful tips for how to correctly speak commands in order for them to be properly recognized by the system.

4-128 Monitor, climate, audio, phone and voice recognition systems

● Voice Recognition Settings Describes the available voice recognition settings. ● Adapting the System to Your Voice Tutorial adapting the system to your voice.

USING THE SYSTEM Initialization When the ignition switch is pushed to the ON position, INFINITI Voice Recognition is initialized, which may take up to one minute. When completed, the system is ready to accept voice switch is pushed commands. If the TALK before the initialization completes the display will show the message: “System not ready.” or a beep sounds.

Before starting To get the best performance from INFINITI Voice Recognition, observe the following. ● Keep the interior of the vehicle as quiet as possible. Close the windows to eliminate the surrounding noises (traffic noises, vibration sounds, etc.), which may prevent the system from recognizing the voice commands correctly.

● When the air conditioner is in the AUTO mode, the fan speed decreases automatically for easy recognition. ● Wait until a tone sounds before speaking a command. ● Speak in a natural voice without pausing between words.

SAA1588

SAA2548

switch

2. A list of commands appears on the screen, and the system announces, “Please say a command”.

Giving voice command 1. Push and release the TALK located on the steering wheel.

3. After the tone sounds and the icon on the to , screen changes from speak a command. Operating tips : ● Voice commands cannot be accepted when . the icon is ● The list displayed can be scrolled by tilting the menu control switch on the steering wheel. ● If the command is not recognized, the system announces, “Please say again”. Repeat the command in a clear voice.

Monitor, climate, audio, phone and voice recognition systems 4-129

● Push the BACK button once to return to the previous screen.

Phone numbers

● If you want to cancel the command, push switch for 1 secand hold the TALK ond. The message “Voice canceled” will be announced.

● 1-800-662-6200

● To skip the voice guidance function and give the command immediately, press the TALK switch to interrupt the system. Remember to speak after the tone. ● If you want to adjust the volume of the system feedback, push the volume control switch (+ or ⫺) on the steering wheel or use the audio system volume knob while the system is making an announcement. How to speak numbers : INFINITI Voice Recognition requires a certain way to speak numbers when giving voice commands. Refer to the following examples.

Speak phone numbers according to the following examples: – “Dial one eight zero zero six six two six two zero zero.” Note 1: For the best voice recognition phone dialing results, say phone numbers as single digits. Note 2: You cannot say 555-6000 as “five five five six thousands”. Note 3: When speaking a house number, speak the number “0” as “zero”. If the letter “o (Oh)” is included in the house number, it will not be recognized as the number “0 (zero)” even if you speak “oh” instead of “zero”. Please speak “zero” for the number “0 (zero)”, “oh” for the letter “o (oh)”.

General rule Only single digits 0 (zero) to 9 can be used. (For example, if you would like to say 500, “five zero zero” can be used, but “five hundred” cannot.

4-130 Monitor, climate, audio, phone and voice recognition systems

SAA2549

Speaker adaptation function (for Alternate Command Mode) The voice recognition system has a function to learn the user’s voice for better voice recognition performance. The system can memorize the voices of up to three persons. Having the system learn the user’s voice: 1. Push the SETTING button on the instrument panel and select the “Others” key. 2. Select the “Voice Recognition” key. 3. Select the “Speaker Adaptation” key.

7. Select a voice command and then push the ENTER button. The voice recognition system starts.

SAA2550

SAA2551

4. Select the user whose voice is memorized by the system. 5. Select the “Start Speaker Adaptation Learning” key.

6. Select a category to be learned by the system from the following list. ● Phone Commands ● Navigation Commands ● Information Commands ● Audio Commands ● Help Commands The voice commands in the category are displayed.

Monitor, climate, audio, phone and voice recognition systems 4-131

If the system has learned the command correctly, the voice command status on the right side of the command turns from “None” to “Stored”.

SAA2552

SAA2553

8. The system requests that you repeat a command after a tone. 9. After the tone sounds and the icon on the to , screen changes from speak the command that the system requested. 10. When the system has recognized the voice command, the voice of the user is learned.

Speaker Adaptation function settings :

switch or BACK button to return Push the to the previous screen.

Continuous Learning

4-132 Monitor, climate, audio, phone and voice recognition systems

Edit User Name Edit the user name using the keypad displayed on the screen. Delete Voice Data Resets the user’s voice that the voice recognition system has learned.

When this item is turned to ON, you can have the system learn the voice commands in succession, without selecting commands one by one.

Minimize voice feedback (for Alternate Command Mode) To minimize the voice feedback from the system, perform the following steps. 1. Push the SETTING button on the instrument panel. 2. Select the “Others” key. 3. Select the “Voice Recognition” key. 4. Select the “Minimize Voice Feedback” key. 5. The setting is turned to ON and the voice guidance will now be reduced when using the Voice Recognition system.

Monitor, climate, audio, phone and voice recognition systems 4-133

TROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty. If problems are encountered, follow the solutions given in this guide for the appropriate error. Where the solutions are listed by number, try each solution in turn, starting with number one, until the problem is resolved. Symptom/error message

Solution 1. Ensure that the command format is valid, see “Command List” earlier in this section. 2. Speak clearly without pausing between words and at a level appropriate to the ambient noise level.

3. Ensure that the ambient noise level is not excessive, for example, windows open or defrost on. Displays “COMMAND NOT RECOGNIZED” or the system fails to interpret the command correctly. NOTE:

If it is too noisy to use the phone, it is likely that voice commands will not be recognized. 4. If optional words of the command have been omitted, then the command should be tried with these in place. The system consistently selects the wrong voicetag in the phonebook.

1. Ensure that the voicetag requested matches what was originally stored. (See “BLUETOOTH姞 HANDSFREE PHONE SYSTEM (models with navigation system)” earlier in this section; page 4-85.) 2. Replace one of the voicetags being confused with a different voicetag.

The system cannot be operated.

1. Make sure that the retractable hard top is usable. If the retractable hard top is not working, contact an INFINITI retailer. 2. Close the retractable hard top. 3. Open and close the retractable hard top before operating the system.

4-134 Monitor, climate, audio, phone and voice recognition systems

MEMO

Monitor, climate, audio, phone and voice recognition systems 4-135

5 Starting and driving

Precautions when starting and driving . . . . . . . . . . . . . . 5-2 Exhaust gas (carbon monoxide). . . . . . . . . . . . . . . . . . 5-2 Three-way catalyst . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Tire Pressure Monitoring System (TPMS) . . . . . . . . . 5-3 Avoiding collision and rollover. . . . . . . . . . . . . . . . . . . 5-5 Off-road recovery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Rapid air pressure loss . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Drinking alcohol/drugs and driving . . . . . . . . . . . . . . 5-7 Push-button ignition switch . . . . . . . . . . . . . . . . . . . . . . . . 5-7 Operating range for engine start function. . . . . . . . . 5-8 Push-button ignition switch operation. . . . . . . . . . . . 5-8 Steering lock (if so equipped) . . . . . . . . . . . . . . . . . . . 5-9 Push-button ignition switch positions . . . . . . . . . . . . 5-9 Emergency engine shut off . . . . . . . . . . . . . . . . . . . . . . 5-9 Intelligent Key battery discharge. . . . . . . . . . . . . . . . 5-10 Before starting the engine . . . . . . . . . . . . . . . . . . . . . . . . . 5-11 Starting the engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11 Driving the vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-12 Automatic transmission . . . . . . . . . . . . . . . . . . . . . . . . .5-12 Manual transmission . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16 Parking brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-18 Automatic transmission models. . . . . . . . . . . . . . . . . 5-18 Manual transmission models . . . . . . . . . . . . . . . . . . . .5-19 Cruise control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-19

Precautions on cruise control. . . . . . . . . . . . . . . . . . . .5-19 Cruise control operations . . . . . . . . . . . . . . . . . . . . . . 5-20 Intelligent Cruise Control (ICC) system (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-21 Selecting the vehicle-to-vehicle distance control mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-22 Vehicle-to-vehicle distance control mode . . . . . . . . 5-22 Precautions on vehicle-to-vehicle distance control mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-23 Vehicle-to-vehicle distance control mode operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-25 Conventional (FIXED SPEED) cruise control mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-38 Preview function (for Intelligent Cruise Control system equipped models) . . . . . . . . . . . . . . 5-42 Break-in schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-42 Increasing fuel economy . . . . . . . . . . . . . . . . . . . . . . . . . . 5-43 Parking/parking on hills . . . . . . . . . . . . . . . . . . . . . . . . . . 5-44 Sonar system (if so equipped). . . . . . . . . . . . . . . . . . . . . 5-45 Sonar indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-46 Sonar system off switch . . . . . . . . . . . . . . . . . . . . . . . 5-47 Power steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-47 Brake system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-48 Braking precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-48

Parking brake break-in. . . . . . . . . . . . . . . . . . . . . . . . . 5-48 Brake assist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-49 Brake assist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-49 Preview function (Intelligent Cruise Control system equipped models) . . . . . . . . . . . . . . . . . . . . . . 5-49 Anti-lock Braking System (ABS) . . . . . . . . . . . . . . . . . .5-51 Vehicle Dynamic Control (VDC) system . . . . . . . . . . . . . 5-52 Cold weather driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-54

Freeing a frozen door lock . . . . . . . . . . . . . . . . . . . . . Antifreeze . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Draining of coolant water . . . . . . . . . . . . . . . . . . . . . . Tire equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Special winter equipment . . . . . . . . . . . . . . . . . . . . . . Driving on snow or ice . . . . . . . . . . . . . . . . . . . . . . . . . Engine block heater (if so equipped) . . . . . . . . . . . .

5-54 5-54 5-54 5-54 5-54 5-54 5-54 5-55

PRECAUTIONS WHEN STARTING AND DRIVING WARNING ● Do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possibly fatal injuries to people or animals. ● Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where they could be seriously injured. Keep the car locked, with the rear seatback and trunk lid securely latched when not in use, and prevent children’s access to car keys.

EXHAUST GAS (carbon monoxide) WARNING ● Do not breathe exhaust gases; they contain colorless and odorless carbon monoxide. Carbon monoxide is dangerous. It can cause unconsciousness or death.

● If you suspect that exhaust fumes are entering the vehicle, drive with all windows fully open, and have the vehicle inspected immediately. ● Do not run the engine in closed spaces such as a garage.

– You have had an accident involving damage to the exhaust system, underbody, or rear of the vehicle.

● Do not park the vehicle with the engine running for any extended length of time.

THREE-WAY CATALYST

● Keep the trunk lid closed while driving, otherwise exhaust gases could be drawn into the passenger compartment. If you must drive with the trunk lid open, follow these precautions:

The three-way catalyst is an emission control device installed in the exhaust system. Exhaust gases in the three-way catalyst are burned at high temperatures to help reduce pollutants.

1. Open all the windows. air recirculation to off and 2. Set the the fan control to high to circulate the air. ● If electrical wiring or other cable connections must pass to a trailer through the seal on the trunk lid or the body, follow the manufacturer’s recommendation to prevent carbon monoxide entry into the vehicle. ● The exhaust system and body should be inspected by a qualified mechanic whenever: – The vehicle is raised for service. – You suspect that exhaust fumes are entering into the passenger compartment.

5-2 Starting and driving

– You notice a change in the sound of the exhaust system.

WARNING ● The exhaust gas and the exhaust system are very hot. Keep people, animals or flammable materials away from the exhaust system components. ● Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire.

CAUTION ● Do not use leaded gasoline. Deposits from leaded gasoline seriously reduce the threeway catalyst’s ability to help reduce exhaust pollutants. ● Keep your engine tuned up. Malfunctions in the ignition, fuel injection, or electrical systems can cause overrich fuel flow into the three-way catalyst, causing it to overheat. Do not keep driving if the engine misfires, or if noticeable loss of performance or other unusual operating conditions are detected. Have the vehicle inspected promptly by an INFINITI retailer. ● Avoid driving with an extremely low fuel level. Running out of fuel could cause the engine to misfire, damaging the three-way catalyst. ● Do not race the engine while warming it up. ● Do not push or tow your vehicle to start the engine.

TIRE PRESSURE MONITORING SYSTEM (TPMS) Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.) As an added safety feature, your vehicle has been equipped with a Tire Pressure Monitoring System (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check all 4 tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability.

Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale. Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly.

Starting and driving 5-3

Additional information ● The TPMS does not monitor the tire pressure of the spare tire. ● The TPMS will activate only when the vehicle is driven at speeds above 16 MPH (25 km/h). Also, this system may not detect a sudden drop in tire pressure (for example a flat tire while driving). ● The low tire pressure warning light does not automatically turn off when the tire pressure is adjusted. After the tire is inflated to the recommended pressure, the vehicle must be driven at speeds above 16 MPH (25 km/h) to activate the TPMS and turn off the low tire pressure warning light. Use a tire pressure gauge to check the tire pressure. ● The CHECK TIRE PRESSURE warning appears on the dot matrix liquid crystal display when the low tire pressure warning light is illuminated and low tire pressure is detected. The CHECK TIRE PRESSURE warning turns off when the low tire pressure warning light turns off. The CHECK TIRE PRESSURE warning does not appear if the low tire pressure warning light illuminates to indicate a TPMS malfunction. ● Tire pressure rises and falls depending on the heat caused by the vehicle’s operation and the outside temperature. Low outside temperature

5-4 Starting and driving

can lower the temperature of the air inside the tire which can cause a lower tire inflation pressure. This may cause the low tire pressure warning light to illuminate. If the warning light illuminates in low ambient temperature, check the tire pressure for all four tires. For additional information, see “Low tire pressure warning light” in the “2. Instruments and controls” section and “TIRE PRESSURE MONITORING SYSTEM (TPMS)” in the “6. In case of emergency” section.

WARNING ● If the low tire pressure warning light illuminates while driving, avoid sudden steering maneuvers or abrupt braking, reduce vehicle speed, pull off the road to a safe location and stop the vehicle as soon as possible. Driving with under-inflated tires may permanently damage the tires and increase the likelihood of tire failure. Serious vehicle damage could occur and may lead to an accident and could result in serious personal injury. Check the tire pressure for all four tires. Adjust the tire pressure to the recommended COLD tire pressure shown on the Tire and Loading Information label to turn the low tire pressure warning light OFF. If the light still illuminates while driving after adjusting the tire

pressure, a tire may be flat. If you have a flat tire, replace it with a spare tire as soon as possible. (See “FLAT TIRE” in the “6. In case of emergency” section for changing a flat tire.) ● When a spare tire is mounted or a wheel is replaced, the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. Contact your INFINITI retailer as soon as possible for tire replacement and/or system resetting. ● Replacing tires with those not originally specified by INFINITI could affect the proper operation of the TPMS. ● Do not inject any tire liquid or aerosol tire sealant into the tires, as this may cause a malfunction of the tire pressure sensors (for models not equipped with the emergency tire puncture repair kit). ● If you used the Emergency Tire Sealant to repair a minor tire puncture, your INFINITI retailer will also need to replace the TPMS sensor in addition to repairing or replacing the tire (for models equipped with the emergency tire puncture repair kit).

● INFINITI recommends using only INFINITI Genuine Emergency Tire Sealant provided with your vehicle. Other tire sealants may damage the valve stem seal which can cause the tire to lose air pressure (for models equipped with the emergency tire puncture repair kit).

CAUTION ● The TPMS may not function properly when the wheels are equipped with tire chains or the wheels are buried in snow. ● Do not place metalized film or any metal parts (antenna, etc.) on the windows. This may cause poor reception of the signals from the tire pressure sensors, and the TPMS will not function properly. Some devices and transmitters may temporarily interfere with the operation of the TPMS and cause the low tire pressure warning light to illuminate. Some examples are: – Facilities or electric devices using similar radio frequencies are near the vehicle. – If a transmitter set to similar frequencies is being used in or near the vehicle.

– If a computer (or similar equipment) or a DC/AC converter is being used in or near the vehicle.

AVOIDING COLLISION AND ROLLOVER

FCC Notice:

Failure to operate this vehicle in a safe and prudent manner may result in loss of control or an accident.

For USA: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. For Canada: This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

WARNING

Be alert and drive defensively at all times. Obey all traffic regulations. Avoid excessive speed, high speed cornering, or sudden steering maneuvers, because these driving practices could cause you to lose control of your vehicle. As with any vehicle, a loss of control could result in a collision with other vehicles or objects, or cause the vehicle to rollover, particularly if the loss of control causes the vehicle to slide sideways. Be attentive at all times, and avoid driving when tired. Never drive when under the influence of alcohol or drugs (including prescription or over-the-counter drugs which may cause drowsiness). Always wear your seat belt as outlined in the “SEAT BELTS” in the “1. Safety — Seats, seat belts and supplemental restraint system” section of this manual, and also instruct your passengers to do so. Seat belts help reduce the risk of injury in collisions and rollovers. In a rollover crash, an unbelted or improperly belted person is significantly more likely to be injured or killed than a person properly wearing a seat belt.

Starting and driving 5-5

OFF-ROAD RECOVERY While driving, the right side or left side wheels may unintentionally leave the road surface. If this occurs, maintain control of the vehicle by following the procedure below. Please note that this procedure is only a general guide. The vehicle must be driven as appropriate based on the conditions of the vehicle, road and traffic. 1. Remain calm and do not overreact. 2. Do not apply the brakes. 3. Maintain a firm grip on the steering wheel with both hands and try to hold a straight course. 4. When appropriate, slowly release the accelerator pedal to gradually slow the vehicle. 5. If there is nothing in the way, steer the vehicle to follow the road while the vehicle speed is reduced. Do not attempt to drive the vehicle back onto the road surface until vehicle speed is reduced.

5-6 Starting and driving

6. When it is safe to do so, gradually turn the steering wheel until both tires return to the road surface. When all tires are on the road surface, steer the vehicle to stay in the appropriate driving lane. ● If you decide that it is not safe to return the vehicle to the road surface based on vehicle, road or traffic conditions, gradually slow the vehicle to a stop in a safe place off the road.

RAPID AIR PRESSURE LOSS Rapid air pressure loss or a “blow-out” can occur if the tire is punctured or is damaged due to hitting a curb or pothole. Rapid air pressure loss can also be caused by driving on underinflated tires. Rapid air pressure loss can affect the handling and stability of the vehicle, especially at highway speeds. Help prevent rapid air pressure loss by maintaining the correct air pressure and visually inspect the tires for wear and damage. See “WHEELS AND TIRES” in the “8. Maintenance and do-it-yourself” section of this manual.

If a tire rapidly loses air pressure or “blows-out” while driving maintain control of the vehicle by following the procedure below. Please note that this procedure is only a general guide. The vehicle must be driven as appropriate based on the conditions of the vehicle, road and traffic.

WARNING The following actions can increase the chance of losing control of the vehicle if there is a sudden loss of tire air pressure. Losing control of the vehicle may cause a collision and result in personal injury. ● The vehicle generally moves or pulls in the direction of the flat tire. ● Do not rapidly apply the brakes. ● Do not rapidly release the accelerator pedal. ● Do not rapidly turn the steering wheel. 1. Remain calm and do not overreact. 2. Maintain a firm grip on the steering wheel with both hands and try to hold a straight course. 3. When appropriate, slowly release the accelerator pedal to gradually slow the vehicle.

PUSH-BUTTON IGNITION SWITCH 4. Gradually steer the vehicle to a safe location off the road and away from traffic if possible. 5. Lightly apply the brake pedal to gradually stop the vehicle. 6. Turn on the hazard warning flashers and either contact a roadside emergency service to change the tire or see “CHANGING FLAT TIRE (for models with spare tire)” in the “6. In case of emergency” section of this Owner’s Manual.

DRINKING ALCOHOL/DRUGS AND DRIVING WARNING

INFINITI is committed to safe driving. However, you must choose not to drive under the influence of alcohol. Every year thousands of people are injured or killed in alcohol-related accidents. Although the local laws vary on what is considered to be legally intoxicated, the fact is that alcohol affects all people differently and most people underestimate the effects of alcohol. Remember, drinking and driving don’t mix! And that is true for drugs, too (over-the-counter, prescription, and illegal drugs). Don’t drive if your ability to operate your vehicle is impaired by alcohol, drugs, or some other physical condition.

WARNING Do not operate the push-button ignition switch while driving the vehicle except in an emergency. (The engine will stop when the ignition switch is pushed 3 consecutive times or the ignition switch is pushed and held for more than 2 seconds.) If the engine stops while the vehicle is being driven, this could lead to a crash and serious injury. Before operating the push-button ignition switch, be sure to move the selector lever to the P (Park) position (for automatic transmission model) or the shift lever to the N (Neutral) position (for manual transmission model).

Never drive under the influence of alcohol or drugs. Alcohol in the bloodstream reduces coordination, delays reaction time and impairs judgement. Driving after drinking alcohol increases the likelihood of being involved in an accident injuring yourself and others. Additionally, if you are injured in an accident, alcohol can increase the severity of the injury.

Starting and driving 5-7

● The trunk area is not included in the operating range but the Intelligent Key may function. ● If the Intelligent Key is placed on the instrument panel, rear parcel shelf, inside the glove box or door pocket, the Intelligent Key may not function. ● If the Intelligent Key is placed near the door or window outside the vehicle, the Intelligent Key may function. SSD0872

SSD1021

OPERATING RANGE FOR ENGINE START FUNCTION

PUSH-BUTTON IGNITION SWITCH OPERATION

The Intelligent Key can only be used for starting the engine when the Intelligent Key is within the 1 . specified operating range 䊊

When the ignition switch is pushed without depressing the brake pedal (automatic transmission model) or the clutch pedal (manual transmission model), the ignition switch position will change as follows:

When the Intelligent Key battery is almost discharged or strong radio waves are present near the operating location, the Intelligent Key system’s operating range becomes narrower and may not function properly. If the Intelligent Key is within the operating range, it is possible for anyone, even someone who does not carry the Intelligent Key, to push the ignition switch to start the engine.

5-8 Starting and driving

● Push center once to change to ACC. ● Push center two times to change to ON. ● Push center three times to change to OFF. (No position illuminates.) ● Push center four times to return to ACC. ● Open or close any door to return to LOCK during the OFF position.

The ignition lock is designed so that the ignition switch position cannot be switched to LOCK until the selector lever is moved to the P (Park) position (Automatic Transmission models). When the ignition switch cannot be switched toward the LOCK position, proceed as follows: Move the selector lever into the P (Park) position (Automatic Transmission models). 1. Push the ignition switch to the OFF position. The ignition switch position indicator will not illuminate. 2. Open the door. The ignition switch will change to the LOCK position. The selector lever can be moved from the P (Park) position if the ignition switch is in the ON position and the brake pedal is depressed (Automatic Transmission models).

If the steering lock release malfunction indicator appears on the dot matrix liquid crystal display, push the push-button ignition switch again while lightly turning the steering wheel right and left. (See “DOT MATRIX LIQUID CRYSTAL DISPLAY” in the “2. Instruments and controls” section.) If the battery of the vehicle is discharged, the push-button ignition switch cannot be turned from the LOCK position. Some indicators and warnings for operation are displayed on the dot matrix liquid crystal display between the speedometer and tachometer. (See “DOT MATRIX LIQUID CRYSTAL DISPLAY” in the “2. Instruments and controls” section.)

ACC (Accessories) This position activates electrical accessories such as the radio, when the engine is not running.

ON (Normal operating position) This position turns on the ignition system and electrical accessories.

OFF The engine can be turned off in this position. The ignition lock is designed so that the ignition switch cannot be switched to the LOCK position until the selector lever is moved to the P (Park) position.

PUSH-BUTTON IGNITION SWITCH POSITIONS

EMERGENCY ENGINE SHUT OFF

LOCK (Normal parking position)

In order for the steering wheel to be locked, it must be turned about 1/8 of a right or left turn from the straight up position.

To shut off the engine in an emergency situation while driving perform the following procedure:

The ignition switch can only be locked in this position.

● Rapidly push the push-button ignition switch 3 consecutive times, or

To lock the steering wheel, push the ignition switch to the OFF position. To unlock the steering wheel, push the ignition switch.

The ignition switch will be unlocked when it is pushed to the ACC position while carrying the Intelligent Key or with the Intelligent Key inserted in the port.

● Push and hold the push-button ignition switch for more than 2 seconds.

STEERING LOCK (if so equipped)

Starting and driving 5-9

NOTE:

CAUTION

The Intelligent Key port does not charge the Intelligent Key battery. If you see the low battery indicator in the dot matrix liquid crystal display, replace the battery as soon as possible. (See “INTELLIGENT KEY BATTERY REPLACEMENT” in the “8. Maintenance and do-it-yourself” section.)

Do not leave the vehicle with the push-button ignition switch in ACC or ON positions when the engine is not running for an extended period. This can discharge the battery.

CAUTION SSD0768

INTELLIGENT KEY BATTERY DISCHARGE If the battery of the Intelligent Key is almost B of the Intelligent discharged, the guide light 䊊 A blinks and the indicator appears on Key port 䊊 the dot matrix liquid crystal display. (See “DOT MATRIX LIQUID CRYSTAL DISPLAY” in the “2. Instruments and controls” section.) In this case, inserting the Intelligent Key into 1 allows you to start the engine. Make the port 䊊 sure that the key ring side faces backward as illustrated. Insert the Intelligent Key in the port until it is latched and secured. To remove the Intelligent Key from the port, push the ignition switch to the OFF position and pull the Intelligent Key out of the port.

5-10 Starting and driving

● Never place anything except the Intelligent Key in the Intelligent Key port. Doing so may cause damage to the equipment. ● Make sure the Intelligent Key is in the correct direction when inserting it to the Intelligent Key port. The engine may not start if it is in the incorrect direction. ● Remove the Intelligent Key from the Intelligent Key port after the ignition switch is pushed to the OFF position.

BEFORE STARTING THE ENGINE

STARTING THE ENGINE

● Make sure the area around the vehicle is clear.

1. Apply the parking brake. 2. Automatic Transmission (AT) model:

● Check fluid levels such as engine oil, coolant, brake fluid and window washer fluid as frequently as possible, or at least whenever you refuel. ● Check that all windows and lights are clean. ● Visually inspect tires for their appearance and condition. Also check tires for proper inflation. ● Lock all doors. ● Position seat and adjust head restraints. ● Adjust inside and outside mirrors. ● Fasten seat belts and ask all passengers to do likewise. ● Check the operation of warning lights when the ignition switch is pushed to the ON position. (See “WARNING/INDICATOR LIGHTS AND AUDIBLE REMINDERS” in the “2. Instruments and controls” section.)

Move the selector lever to the P (Park) or N (Neutral) position. (P is recommended.) The starter is designed not to operate unless the selector lever is in either of the above positions. Manual Transmission (MT) model: Move the shift lever to the N (Neutral) position. Depress the clutch pedal fully to the floor. The starter is designed not to operate unless the clutch pedal is fully depressed. The Intelligent Key must be carried when operating the ignition switch. 3. Push the ignition switch to the ON position. Depress the brake pedal (AT model) or the clutch pedal (MT model) and push the ignition switch to start the engine. To start the engine immediately, push and release the ignition switch while depressing the brake pedal or the clutch pedal (MT model) with the ignition switch in any position.

● If the engine is very hard to start in extremely cold weather or when restarting, depress the accelerator pedal a little (approximately 1/3 to the floor) and while holding, crank the engine. Release the accelerator pedal when the engine starts. ● If the engine is very hard to start because it is flooded, depress the accelerator pedal all the way to the floor and hold it. Push the ignition switch to the ON position to start cranking the engine. After 5 or 6 seconds, stop cranking by pushing the ignition switch to OFF. After cranking the engine, release the accelerator pedal. Crank the engine with your foot off the accelerator pedal by depressing the brake pedal and the clutch pedal (MT model) and pushing the push-button ignition switch to start the engine. If the engine starts, but fails to run, repeat the above procedure.

CAUTION Do not operate the starter for more than 15 seconds at a time. If the engine does not start, push the ignition switch to OFF and wait 10 seconds before cranking again, otherwise the starter could be damaged.

Starting and driving 5-11

DRIVING THE VEHICLE 4. Warm-up Allow the engine to idle for at least 30 seconds after starting. Do not race the engine while warming it up. Drive at moderate speed for a short distance first, especially in cold weather. In cold weather, keep the engine running for a minimum of 2 - 3 minutes before shutting it off. Starting and stopping the engine over a short period of time may make the vehicle more difficult to start. When racing the engine up to 4,000 rpm or more under no load condition, the engine will enter the fuel cut mode. 5. To stop the engine, shift the selector lever to the P (Park) position (AT model) or move the shift lever to the N (Neutral) position (MT model), and push the ignition switch to the OFF position.

AUTOMATIC TRANSMISSION 7 speed automatic transmission

1. Keep the foot brake pedal depressed and push the selector lever button to shift into a driving gear.

The automatic transmission in your vehicle is electronically controlled by a transmission control module to produce maximum efficiency and smooth operation.

2. Release the parking brake and foot brake, then gradually start the vehicle in motion.

Shown on the following pages are the recommended operating procedures for this transmission. Follow these procedures for maximum vehicle performance and driving enjoyment.

● Do not depress the accelerator pedal while shifting from P (Park) or N (Neutral) to R (Reverse), D (Drive), DS (Drive Sport) or manual shift mode. Always depress the brake pedal until shifting is completed. Failure to do so could cause you to lose control and have an accident.

Starting the vehicle After starting the engine, fully depress the foot brake pedal and push the selector lever button before shifting the selector lever to the R (Reverse), N (Neutral), D (Drive), DS (Drive Sport) or Manual shift mode position. Be sure the vehicle is fully stopped before attempting to shift the selector lever. This automatic transmission model is designed so that the foot brake pedal must be depressed before shifting from P (Park) to any drive position while the ignition switch position is ON. The selector lever cannot be moved out of the P (Park) position and into any of the other gear positions if the ignition switch is pushed to the LOCK, OFF or ACC position.

5-12 Starting and driving

WARNING

● Cold engine idle speed is high, so use caution when shifting into a forward or reverse gear before the engine has warmed up. ● Never shift to P (Park) or R (Reverse) while vehicle is moving forward. Never shift to P (Park), D (Drive) or DS (Drive Sport) while vehicle is moving rearward. Failure to do so could cause you to lose control and have an accident.

Push the button to shift into P (Park) or R (Reverse). All other positions can be selected without pushing the button.

CAUTION ● When stopping the vehicle on an uphill grade, do not hold the vehicle by depressing the accelerator pedal. The foot brake should be used for this purpose.

WARNING Apply the parking brake if the selector lever is in any position while the engine is not running. Failure to do so could cause the vehicle to move unexpectedly or roll away and result in serious personal injury or property damage.

● Do not downshift abruptly on slippery roads. This may cause a loss of control.

SSD0596

Selector lever

CAUTION Make sure the vehicle is completely stopped and the transmission is in the P (Park) position.

Shifting To move the selector lever, : Push the button while depressing the brake pedal, : Push the button, : Just move the selector lever. After starting the engine, fully depress the brake pedal and shift the selector lever from P (Park) to R (Reverse), N (Neutral), D (Drive), DS (Drive Sport) or Manual shift mode position.

P (Park) position : Use this selector position when the vehicle is parked or when starting the engine. Make sure the vehicle is completely stopped. The brake pedal must be depressed and the selector lever button pushed in to move the selector lever from the N (Neutral) position or any drive position to the P (Park) position. Apply the parking brake. When parking on a hill, apply the parking brake first, then move the selector lever to the P (Park) position.

Starting and driving 5-13

CAUTION

DS (Drive Sport) mode

Use this position only when the vehicle is completely stopped.

Move the selector lever from D (Drive) to the left into the manual shift gate. The transmission position indicator in the meter shows “DS”.

R (Reverse) :

In the DS (Drive Sport) mode, the transmission changes to the “sporty” driving shift operation, creating a more aggressive acceleration feeling than the D (Drive) mode and providing a gear change sensation when the driver accelerates quickly.

Use this position to back up. Always be sure the vehicle is completely stopped before selecting the R (Reverse) position. The brake pedal must be depressed and the selector lever button pushed in to move the selector lever from the P (Park) position, the N (Neutral) position or any drive position to the R (Reverse) position. N (Neutral) : Neither forward nor reverse gear is engaged. The engine can be started in this position. You may shift to the N (Neutral) position and restart a stalled engine while the vehicle is moving. D (Drive) : Use this position for all normal forward driving.

When the driver selects the manual shift mode using the selector lever (or the paddle shifter) during the DS (Drive Sport) mode operation, the driver must move the selector lever from DS (Drive Sport) to D (Drive) and back again to re-select the DS (Drive Sport) mode.

SSD0599

Paddle shifter

Manual shift mode When the selector lever is in the DS (Drive Sport) position, the transmission is ready for the manual shift mode. Shift ranges can be selected manually by moving the selector lever up or down, or pulling the right-side or left-side paddle shifter. When shifting up, move the selector lever to the + (up) side or pull the right-side paddle shifter A (if so equipped). The transmission shifts (+) 䊊 to the higher range.

5-14 Starting and driving

When shifting down, move the selector lever to the ⫺ (down) side or pull the left-side paddle B (if so equipped). The transmisshifter (⫺) 䊊 sion shifts to the lower range.

M

4 (4th), M3 (3rd) and M2 (2nd) :

Use for hill climbing or engine braking on downhill grades. M

When canceling the manual shift mode, return the selector lever to the D (Drive) position. The transmission returns to the normal driving mode. When you pull the paddle shifter while in the D (Drive) position, the transmission will shift to the upper or lower range temporarily. The transmission will automatically return to the D (Drive) position after a short period of time. If you want to return to the D (Drive) position manually, pull and hold the paddle shifter for about 1.5 seconds. In the manual shift mode, the shift range is displayed on the position indicator in the meter. Shift ranges up or down one by one as follows: M

1

→ ←

2 → ←

M

3 → ←

M

4 → ←

M

5 → ←

M

6 → ←

M

M

7

M

7 (7th) :

Use this position for all normal forward driving at highway speeds. M

6 (6th) and M5 (5th) :

Use this position when driving up long slopes, or for engine braking when driving down long slopes.

1 (1st) :

Use this position when climbing steep hills slowly or driving slowly through deep snow, or for maximum engine braking on steep downhill grades. ● Remember not to drive at high speeds for extended periods of time in lower than 7th gear. This reduces fuel economy. ● Moving the selector lever rapidly to the same side twice will shift the ranges in succession. ● In the manual shift mode, the transmission may not shift to the selected gear. This helps maintain driving performance and reduces the chance of vehicle damage or loss of control. When this situation occurs, the Automatic Transmission (AT) position indicator light (on the dot matrix liquid crystal display) will blink and the chime will sound.

Accelerator downshift — In D (Drive) position — For passing or hill climbing, fully depress the accelerator pedal to the floor. This shifts the transmission down into the lower gear, depending on the vehicle speed.

Fail-safe When the fail-safe operation occurs, note that the transmission will be locked in any of the forward gears according to the condition. If the vehicle is driven under extreme conditions, such as excessive wheel spinning and subsequent hard braking, the fail-safe system may be activated. This will occur even if all electrical circuits are functioning properly. In this case, push the ignition switch to the OFF position and wait for 3 seconds. Then push the ignition switch back to the ON position. The vehicle should return to its normal operating condition. If it does not return to its normal operating condition, have an INFINITI retailer check the transmission and repair if necessary.

● In the manual shift mode, the transmission automatically shifts down to 1st gear before the vehicle comes to a stop. When accelerating again, it is necessary to shift up to the desired range.

Starting and driving 5-15

B as illustrated. 4. Push down the shift lock 䊊 C and 5. Push the selector lever button 䊊 move the selector lever to N (Neutral) D while holding down the shift position 䊊 lock.

Push the ignition switch to the ON position to unlock the steering wheel (if so equipped). Now the vehicle may be moved to the desired location.

SSD0598

Shift lock release If the battery charge is low or discharged, the selector lever may not be moved from the P (Park) position even with the brake pedal depressed and the selector lever button pushed. To move the selector lever, perform the following procedure: 1. Push the ignition switch to the OFF or LOCK position. 2. Apply the parking brake. A using a 3. Remove the shift lock cover 䊊 suitable tool.

5-16 Starting and driving

For models with a steering wheel lock mechanism: If the battery is discharged completely, the steering wheel cannot be unlocked. Do not move the vehicle with the steering wheel locked. If the lever cannot be moved out of P (Park), have an INFINITI retailer check the automatic transmission system as soon as possible.

MANUAL TRANSMISSION WARNING ● Do not downshift abruptly on slippery roads. This may cause a loss of vehicle control. ● Do not over-rev the engine when shifting to a lower gear. This may cause a loss of vehicle control or engine damage.

CAUTION ● Do not rest your foot on the clutch pedal while driving. This may damage the clutch. ● Fully depress the clutch pedal before shifting to help prevent transmission damage. ● Stop your vehicle completely before shifting into the R (Reverse) position. ● When the vehicle is stopped with the engine running for a period of time, for example at a stop light, shift to the N (Neutral) position and release the clutch pedal with the foot brake applied.

Start the vehicle in 1st gear and shift to 2nd, 3rd, 4th and 5th up to 6th gear in sequence according to vehicle speed.

SSD0536

Shifting To change gears, or when upshifting or downshifting, fully depress the clutch pedal, shift into the appropriate gear, then release the clutch pedal slowly and smoothly. This vehicle is equipped with a short throw shifter manual transmission. To ensure smooth gear changes, fully depress the clutch pedal before operating the shift lever. If the clutch pedal is not fully depressed before the transmission is shifted, a gear noise may be heard. Transmission damage could occur.

For normal acceleration in low altitude areas [less than 4,000 ft (1,219 m)]:

To back up, depress the shift lever and then move it to the R (Reverse) position after stopping the vehicle completely.

Gear change

The shift lever returns to its original position when the shift lever is moved to the N (Neutral) position.

3rd to 4th

25 (40)

4th to 5th

28 (45)

5th to 6th

33 (53)

If it is difficult to move the shift lever into the R (Reverse) or 1st gear, shift the N (Neutral) position, and then release the clutch pedal once. Fully depress the clutch pedal again and shift into the R (Reverse) or 1st gear.

MPH (km/h)

1st to 2nd

8 (13)

2nd to 3rd

16 (25)

For quick acceleration in low altitude areas or in high altitude areas [over 4,000 ft (1,219 m)]: Gear change

MPH (km/h)

Suggested upshift speeds

1st to 2nd

15 (24)

The following are suggested vehicle speeds for shifting into a higher gear. These suggestions relate to fuel economy and vehicle performance. Actual upshift speeds will vary according to road conditions, the weather and individual driving habits.

2nd to 3rd

25 (40)

3rd to 4th

40 (64)

4th to 5th

45 (72)

5th to 6th

50 (80)

Starting and driving 5-17

PARKING BRAKE Suggested maximum speed in each gear Downshift to a lower gear if the engine is not running smoothly, or if you need to accelerate. Do not exceed the maximum suggested speed (shown below) in any gear. For level road driving, use the highest gear suggested for that speed. Always observe posted speed limits, and drive according to the road conditions, which will ensure safe operation. Do not over-rev the engine when shifting to a lower gear as it may cause engine damage or loss of vehicle control. Gear

MPH (km/h)

1st

37 (59)

2nd

60 (97)

3rd

86 (139)

4th

—

5th

—

6th

—

5-18 Starting and driving

WARNING ● Be sure the parking brake is fully released before driving. Failure to do so can cause brake failure and lead to an accident. ● Do not release the parking brake from outside the vehicle. ● Do not use the gear shift in place of the parking brake. When parking, be sure the parking brake is fully engaged. ● Do not leave children unattended in a vehicle. They could release the parking brake and cause an accident.

SPA2331

AUTOMATIC TRANSMISSION MODELS To apply: Fully depress the parking brake pedal 1 . 䊊 To release: 2 . 1. Firmly apply the foot brake 䊊 1 and 2. Depress the parking brake pedal 䊊 the parking brake will be released. 3. Before driving, be sure the brake warning light goes out.

CRUISE CONTROL PRECAUTIONS ON CRUISE CONTROL ● If the cruise control system malfunctions, it will cancel automatically. The SET indicator on the dot matrix crystal display will then blink to warn the driver. ● If the engine coolant temperature becomes excessively high, the cruise control system will be canceled automatically. ● If the SET indicator blinks, turn the cruise control main switch off and have the system checked by your INFINITI retailer. SPA2110

MANUAL TRANSMISSION MODELS 1 . To apply: Pull the parking brake lever up 䊊

To release: 1. Firmly apply the foot brake. 2. While pulling up on the parking brake 2 and lever slightly, push the button 䊊 3 . lower the lever completely 䊊 3. Before driving, be sure the brake warning light goes out.

● The SET indicator may sometimes blink when the cruise control main switch is turned ON while pushing the RESUME/ACCELERATE, SET/COAST or CANCEL switch. To properly set the cruise control system, perform the steps below in the order indicated.

WARNING Do not use the cruise control when driving under the following conditions: ● when it is not possible to keep the vehicle at a set speed ● in heavy traffic or in traffic that varies in speed ● on winding or hilly roads ● on slippery roads (rain, snow, ice, etc.) ● in very windy areas Doing so could cause a loss of vehicle control and result in an accident.

CAUTION On manual transmission models, do not shift into N (Neutral) without depressing the clutch pedal when the cruise control is set. Should this occur, depress the clutch pedal and turn the main switch off immediately. Failure to do so may cause engine damage.

Starting and driving 5-19

To set cruising speed, accelerate your vehicle to the desired speed, push the SET/COAST switch and release it. (The CRUISE SET indicator will come on in the instrument panel.) Take your foot off the accelerator pedal. Your vehicle will maintain the set speed. ● To pass another vehicle, depress the accelerator pedal. When you release the pedal, the vehicle will return to the previously set speed.

SSD0600

1. 2. 3. 4.

RESUME/ACCELERATE switch SET/COAST switch CANCEL switch MAIN (ON·OFF) switch

CRUISE CONTROL OPERATIONS The cruise control allows driving at a speed between 25 to 89 MPH (40 to 144 km/h) without keeping your foot on the accelerator pedal. To turn on the cruise control, push the MAIN switch on. The CRUISE indicator will come on.

5-20 Starting and driving

● The vehicle may not maintain the set speed on winding or hilly roads. If this happens, drive without the cruise control. To cancel the preset speed, follow any of these methods: a) Push the CANCEL button. The SET indicator will go out. b) Tap the brake pedal. The SET indicator will go out. c) Move the selector lever to the N (Neutral) position. The SET indicator will go out. d) Turn the MAIN switch off. Both the CRUISE indicator and SET indicator will go out.

● If you depress the brake pedal while pushing the RESUME/ACCELERATE or SET/COAST switch and reset at the cruising speed, the cruise control will disengage. Turn the MAIN switch off once and then turn it on again. ● The cruise control will automatically cancel if the vehicle slows more than 8 MPH (12 km/h) below the set speed. ● If you depress the clutch pedal (Manual Transmission models) or move the selector lever to N (Neutral) position (Automatic Transmission models), the cruise control will be canceled. To reset at a faster cruising speed, use one of the following methods: ● Depress the accelerator pedal. When the vehicle attains the desired speed, push and release the SET/COAST switch. ● Push and hold the RESUME/ACCELERATE switch. When the vehicle attains the speed you desire, release the switch. ● Push, then quickly release the RESUME/ACCELERATE switch. Each time you do this, the set speed will increase by about 1 MPH (1.6 km/h).

INTELLIGENT CRUISE CONTROL (ICC) SYSTEM (if so equipped) To reset at a slower cruising speed, use one of the following methods: ● Lightly tap the brake pedal. When the vehicle attains the desired speed, push the SET/COAST switch and release it.

The Intelligent Cruise Control (ICC) system automatically maintains a selected distance from the vehicle traveling in front of you according to that vehicle’s speed (up to the set speed), or at the set speed when the road ahead is clear.

● Push and hold the SET/COAST switch. Release the switch when the vehicle slows down to the desired speed.

The ICC function can be set to one of two cruise control modes:

● Push, then quickly release the SET/COAST switch. Each time you do this, the set speed will decrease by about 1 MPH (1.6 km/h).

For maintaining a selected distance between your vehicle and the vehicle in front of you up to the preset speed.

To resume the preset speed, push and release the RESUME/ACCELERATE switch. The vehicle will resume the last set cruising speed when the vehicle speed is over 25 MPH (40 km/h).

● Conventional (fixed speed) cruise control mode:

● Vehicle-to-vehicle distance control mode:

For cruising at a preset speed.

WARNING ● Always drive carefully and attentively when using either cruise control mode. Read and understand the Owner’s Manual thoroughly before using the cruise control. To avoid serious injury or death, do not rely on the system to prevent accidents or to control the vehicle’s speed in emergency situations. Do not use cruise control except in appropriate road and traffic conditions. ● In the conventional (fixed speed) cruise control mode, a warning chime will not sound to warn you if you are too close to the vehicle ahead. Pay special attention to the distance between your vehicle and the vehicle ahead of you or a collision could occur.

Starting and driving 5-21

VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE In the vehicle-to-vehicle distance control mode, the Intelligent Cruise Control (ICC) system automatically maintains a selected distance from the vehicle traveling in front of you according to that vehicle’s speed (up to the set speed), or at the set speed when the road ahead is clear. With ICC, the driver can maintain the same speed as other vehicles without the constant need to adjust the set speed as you would with a normal cruise control system. SSD0604

1. Vehicle-to-vehicle distance control mode 2. Conventional (fixed speed) cruise control mode A to choose the cruise Push the MAIN switch 䊊 control mode between the vehicle-to-vehicle 1 and the conventional distance control mode 䊊 2 . (fixed speed) cruise control mode 䊊

Always confirm the setting in the Intelligent Cruise Control system display. For the vehicle-to-vehicle distance control mode, see the following description. For the conventional (fixed speed) cruise control mode, see page 5-39.

5-22 Starting and driving

SELECTING THE VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE To choose the vehicle-to-vehicle distance con1 , quickly push and release the trol mode 䊊 A . MAIN switch 䊊 Once a control mode is activated, it cannot be changed to the other cruise control mode. To change the mode, push the MAIN switch once to turn the system off. Then push the MAIN switch again to turn the system back on and select the desired cruise control mode.

PRECAUTIONS ON VEHICLE-TOVEHICLE DISTANCE CONTROL MODE The system is intended to enhance the operation of the vehicle when following a vehicle traveling in the same lane and direction.

SSD0662

Type A

A detects a slower If the distance sensor 䊊 moving vehicle ahead, the system will reduce the vehicle speed so that your vehicle follows the vehicle in front at the selected distance.

The distance sensor will not detect under most conditions:

The system automatically controls the throttle and applies the brakes (up to 25% of vehicle braking power) if necessary.

● Oncoming vehicles in the same lane

The detection range of the sensor is approximately 390 ft (120 m) ahead.

WARNING ● This system is only an aid to assist the driver and is not a collision warning or avoidance device. It is the driver’s responsibility to stay alert, drive safely and be in control of the vehicle at all times.

SSD1169

Type B

● This system will not adapt automatically to road conditions. This system should be used in evenly flowing traffic. Do not use the system on roads with sharp curves, or on icy roads, in heavy rain or in fog.

● The system is primarily intended for use on straight, dry, open roads with light traffic. It is not advisable to use the system in city traffic or congested areas.

● Stationary and slow moving vehicles ● Pedestrians or objects in the roadway ● Motorcycles traveling offset in the travel lane This system will not automatically brake the vehicle to a stop.

WARNING ● As there is a performance limit to the distance control function, never rely solely on the Intelligent Cruise Control system. This system does not correct careless, inattentive or absent-minded driving, or overcome poor visibility in rain, fog, or other bad weather. Decelerate the vehicle speed by depressing the brake pedal, depending on the distance to the vehicle ahead and the surrounding circumstances in order to maintain a safe distance between vehicles.

Starting and driving 5-23

● Although the brake operation is controlled by the system, the system does not automatically stop the vehicle. If the vehicle speed falls below approximately 20 MPH (32 km/h), the Intelligent Cruise Control system is automatically canceled and a warning chime sounds. (The brake control is also canceled.) ● The system may not detect the vehicle in front of you in certain road or weather conditions. To avoid accidents, never use the Intelligent Cruise Control system under the following conditions: – On roads where the traffic is heavy or there are sharp curves – On slippery road surfaces such as on ice or snow, etc.

– On steep downhill roads (the vehicle may go beyond the set vehicle speed and frequent braking may result in overheating the brakes) – On repeated uphill and downhill roads – When traffic conditions make it difficult to keep a proper distance between vehicles because of frequent acceleration or deceleration ● In some road or traffic conditions, a vehicle or object can unexpectedly come into the sensor detection zone and cause automatic braking. You may need to control the distance from other vehicles using the accelerator pedal. Always stay alert and avoid using the ICC system when it is not recommended in this section.

SSD0662

Type A

– During bad weather (rain, fog, snow, etc.) When the windshield wiper is operated at the low speed (LO) or high speed (HI) position, the Intelligent Cruise Control system is automatically canceled. – When strong light (for example, at sunrise or sunset) is directly shining on the front of the vehicle – When rain, snow or dirt adhere to the system sensor

5-24 Starting and driving

SSD1169

Type B

VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE OPERATION Always pay attention to the operation of the vehicle and be ready to manually control the proper following distance. The vehicle-tovehicle distance control mode of the Intelligent Cruise Control (ICC) system may not be able to maintain the selected distance between vehicles (following distance) or selected vehicle speed under some circumstances. The vehicle-to-vehicle distance control mode A located on the front of the uses a sensor 䊊 vehicle to detect vehicles traveling ahead. The sensor generally detects the signals returned from the reflectors on a vehicle ahead. Therefore, if the sensor cannot detect the reflector on the vehicle ahead, the ICC system may not maintain the selected distance. The following are some conditions in which the sensor cannot detect the signals: ● When the reflector of the vehicle ahead is positioned high on the vehicle (trailer, etc.) ● When the reflector on the vehicle ahead is missing, damaged or covered ● When the reflector of the vehicle ahead is covered with dirt, snow and road spray

● When the snow or road spray from traveling vehicles reduces the sensor’s visibility ● When dense exhaust or other smoke (black smoke) from vehicles reduces the sensor’s visibility ● When excessively heavy baggage is loaded in the rear seat or the trunk of your vehicle The ICC system is designed to automatically check the sensor’s operation within the limitations of the system. When the sensor is covered with dirt or obstructs, the system will automatically be canceled. If the sensor is covered with ice, a transparent or translucent vinyl bag, etc., the ICC system may not detect them. In these instances, the vehicle-to-vehicle distance control mode may not cancel and may not be able to maintain the selected following distance from the vehicle ahead. Be sure to check and clean the sensor regularly. The vehicle-to-vehicle distance control mode is designed to maintain a selected distance and reduce the speed to match the slower vehicle ahead; the system will decelerate the vehicle as necessary. However, the ICC system can only apply up to 25% of the vehicles total braking power. This system should only be used when traffic conditions allow vehicle speeds to remain fairly constant or when vehicle speeds change gradually. If a vehicle moves into the

traveling lane ahead or if a vehicle traveling ahead rapidly decelerates, the distance between vehicles may become closer because the ICC system cannot decelerate the vehicle quickly enough. If this occurs, the ICC system will sound a warning chime and blink the system display to notify the driver to take necessary action. The system will cancel and a warning chime will sound if the speed falls below approximately 20 MPH (32 km/h). The system will also disengage below the 20 MPH (32 km/h) cut-off speed or over the maximum set speed. See “Approach warning” later in this section. The following items are controlled in the vehicle-to-vehicle distance control mode: ● When there are no vehicles traveling ahead, the vehicle-to-vehicle distance control mode maintains the speed set by the driver. The set speed range is between approximately 25 and 90 MPH (40 and 144 km/h). ● When there is a vehicle traveling ahead, the vehicle-to-vehicle distance control mode adjusts the speed to maintain the distance, selected by driver, from the vehicle ahead. The adjusting speed range is between approximately 20 MPH (32 km/h) and up to the set speed.

Starting and driving 5-25

● When the vehicle traveling ahead has moved out from its lane of travel, the vehicle-tovehicle distance control mode accelerates and maintains vehicle speed up to the set speed. The ICC system does not control vehicle speed or warn you when you approach stationary and slow moving vehicles. You must pay attention to vehicle operation to maintain proper distance from vehicles ahead when approaching toll gates or traffic congestion.

SSD0252

The detection zone of the ICC sensor is limited. A vehicle ahead must be in the detection zone for the vehicle-to-vehicle distance detection mode to maintain the selected distance from the vehicle ahead. A vehicle ahead may move outside of the detection zone due to its position within the same lane of travel. Motorcycles may not be detected in the same lane ahead if they are traveling offset from the centerline of the lane. A vehicle that is entering the lane ahead may not be detected until the vehicle has completely moved into the lane. If this occurs, the ICC system may warn you by blinking the system indicator and sounding the chime. The driver

5-26 Starting and driving

may have to manually control the proper distance away from vehicle traveling ahead.

When driving on some roads, such as winding, hilly, curved, narrow roads, or roads which are under construction, the ICC sensor may detect vehicles in a different lane, or may temporarily not detect a vehicle traveling ahead. This may cause the ICC system to decelerate or accelerate the vehicle.

SSD0253

SSD0254

The detection of vehicles may also be affected by vehicle operation (steering maneuver or traveling position in the lane, etc.) or vehicle condition. If this occurs, the ICC system may warn you by blinking the system indicator and sounding the chime unexpectedly. You will have to manually control the proper distance away from the vehicle traveling ahead.

When driving on the freeway at a set speed and approaching a slower traveling vehicle ahead, the ICC will adjust the speed to maintain the distance, selected by the driver, from the vehicle ahead. If the vehicle ahead changes lanes or exits the freeway, the ICC system will accelerate and maintain the speed up to the set speed. Pay attention to the driving operation to maintain control of the vehicle as it accelerates to the set speed. The vehicle may not maintain the set speed on winding or hilly roads. If this occurs, you will have to manually control the vehicle speed.

Starting and driving 5-27

4) DISTANCE switch: Changes the vehicle’s following distance: ● Long ● Middle ● Short 5) MAIN switch: Master switch to activate the system

SSD0605

Intelligent cruise control switch The system is operated by a MAIN switch and four control switches, all mounted on the steering wheel. 1) RESUME/ACCELERATE switch: Resumes set speed or increases speed incrementally. 2) SET/COAST switch: Sets desired cruise speed, reduces speed incrementally. 3) CANCEL switch: Deactivates the system without erasing the set speed.

5-28 Starting and driving

SSD0606

Intelligent cruise control system display and indicators The display is located between the speedometer and tachometer. 1) MAIN switch indicator: Indicates that the MAIN switch is ON. 2) Vehicle ahead detection indicator: Indicates whether it detects a vehicle in front of you. 3) Set distance indicator: Displays the selected distance between vehicles set with the DISTANCE switch. 4) Indicates your vehicle

5) Set vehicle speed indicator: Indicates the set vehicle speed. For Canadian models, the speed is displayed in km/h. 6) Intelligent Cruise Control system warning light (orange): The light comes on if there is a malfunction in the ICC system.

SSD0607

When the ignition switch is pushed to the ON position, the indicators come on as illustrated to check for a burned-out bulb, and it turns off when the engine is started.

SSD0608

Operating vehicle-to-vehicle distance control mode To turn on the cruise control, quickly push and A on. The cruise release the MAIN switch 䊊 indicator light, set distance indicator and set vehicle speed indicator come on and in a standby state for setting.

Starting and driving 5-29

● When the rain sensing auto wiper system is operated and the wiper speed is at least the same as the LO (low ) position speed ● When the brakes are operated by the driver

SSD0609

SSD0784

To set cruising speed, accelerate your vehicle to the desired speed, push the SET/COAST switch and release it. (Vehicle ahead detection indicator, set distance indicator and set vehicle speed indicator come on.) Take your foot off the accelerator pedal. Your vehicle will maintain the set speed.

When the SET/COAST switch is pushed under the following conditions, the system cannot be set and the ICC indicators will blink for approximately 2 seconds. ● When traveling below 25 MPH (40 km/h) and the vehicle ahead is not detected ● When the selector lever is not in the D, DS or Manual mode ● When the windshield wipers are operating at low (LO) or high speed (HI)

5-30 Starting and driving

● When ABS or VDC (including the traction control system) is operating ● When driving into a strong light (i.e., sunlight) ● When a wheel is slipping (To use the ICC system, make sure the wheels are no longer slipping. Push the MAIN switch to turn off the ICC, and reset the ICC system by pushing the MAIN switch again.)

SSD0614

When the SET/COAST switch is pushed under the following conditions, the system cannot be set. A warning chime will sound and the ICC indicators will blink. ● When the VDC system is off (To use the ICC system, turn on the VDC system. Push the MAIN switch to turn off the ICC system and reset the ICC switch by pushing the MAIN switch again.) For details about the VDC system, see “VEHICLE DYNAMIC CONTROL (VDC) SYSTEM” later in this section.

Starting and driving 5-31

Vehicle detected ahead : When a vehicle is detected in the lane ahead, the ICC system decelerates the vehicle by controlling the throttle and applying the brakes to match the speed of a slower vehicle ahead. The system then controls the vehicle speed based on the speed of the vehicle ahead to maintain the driver selected distance. The stoplights of the vehicle come on when braking is performed by the ICC system. When the brake operates, a noise may be heard. This is not a malfunction. SSD0610

1. System set display with vehicle ahead 2. System set display without vehicle ahead

System operation WARNING Normally when controlling the distance to a vehicle ahead, this system automatically accelerates or decelerates your vehicle according to the speed of the vehicle ahead. Depress the accelerator to properly accelerate your vehicle when acceleration is required for a lane

change. Depress the brake pedal when deceleration is required to maintain a safe distance to the vehicle ahead due to its sudden braking or if a vehicle cuts in. Always stay alert when using the ICC system. The driver sets the desired vehicle speed based on the road conditions. The ICC system maintains the set vehicle speed, similar to standard cruise control, as long as no vehicle is detected in the lane ahead. The ICC system displays the set speed.

5-32 Starting and driving

When a vehicle ahead is detected, the vehicle ahead detection indicator comes on. The ICC system will also display the set speed and selected distance. Vehicle ahead not detected : When a vehicle is no longer detected ahead, the ICC system gradually accelerates your vehicle to resume the previously set vehicle speed. The ICC system then maintains the set speed. When a vehicle is no longer detected the vehicle ahead detection indicator turns off.

How to change the set vehicle speed

If a vehicle ahead appears during acceleration to the set vehicle speed or any time the ICC system is in operation, the system controls the distance to that vehicle.

To cancel the preset speed, use any of these methods: ● Push the CANCEL switch. The set vehicle speed indicator will go out. ● Tap the brake pedal. The set vehicle speed indicator will go out. ● Turn the MAIN switch off. Both the MAIN switch indicator and set vehicle speed indicator will go out. SSD0611

When passing another vehicle, the set speed indicator will flash when the vehicle speed exceeds the set speed. The vehicle detect indicator will turn off when the area ahead of the vehicle is open. When the pedal is released, the vehicle will return to the previously set speed. Even though your vehicle speed is set in the ICC system, you can depress the accelerator pedal when it is necessary to accelerate your vehicle rapidly.

To reset at a faster cruising speed, use one of the following methods: ● Depress the accelerator pedal. When the vehicle attains the desired speed, push and release the SET/COAST switch. ● Push and hold the RESUME/ACCELERATE switch. The set vehicle speed will increase by approximately 5 MPH (5 km/h for Canada). ● Push, then quickly release the RESUME/ACCELERATE switch. Each time you do this, the set speed will increase by approximately 1 MPH (1 km/h for Canada).

Starting and driving 5-33

To reset at a slower cruising speed, use one of the following methods: ● Lightly tap the brake pedal. When the vehicle attains the desired speed, push the SET/COAST switch and release it. ● Push and hold the SET/COAST switch. The set vehicle speed will decrease by approximately 5 MPH (5 km/h for Canada). ● Push, then quickly release the SET/COAST switch. Each time you do this, the set speed will decrease by approximately 1 MPH (1 km/h for Canada). To resume the preset speed, push and release the RESUME/ACCELERATE switch. The vehicle will resume the last set cruising speed when the vehicle speed is over 25 MPH (40 km/h).

SSD0612

How to change the set distance to the vehicle ahead The distance to the vehicle ahead can be selected at any time depending on the traffic conditions. A is pushed, Each time the DISTANCE switch 䊊 the set distance will change to long, middle, short and back to long again in that sequence.

5-34 Starting and driving

Approach warning If your vehicle comes closer to the vehicle ahead due to rapid deceleration of that vehicle or if another vehicle cuts in, the system warns the driver with the chime and ICC system display. Decelerate by depressing the brake pedal to maintain a safe vehicle distance if: ● The chime sounds. ● The vehicle ahead detection and set distance indicator blink. The warning chime may not sound in some cases when there is a short distance between vehicles. Some examples are: ● When the vehicles are traveling at the same speed and the distance between vehicles is not changing ● When the vehicle ahead is traveling faster and the distance between vehicles is increasing ● When a vehicle cuts in near your vehicle SSD0613

● The distance to the vehicle ahead will change according to the vehicle speed. The higher the vehicle speed, the longer the distance.

● If the engine is stopped, the set distance becomes “long”. (Each time the engine is started, the initial setting becomes “long”.)

The warning chime will not sound when: ● Your vehicle approaches vehicles that are parked or moving slowly. ● The accelerator pedal is depressed, overriding the system.

Starting and driving 5-35

Also, the sensor sensitivity can be affected by vehicle operation (steering maneuver or driving position in the lane) or traffic or vehicle condition (for example, if a vehicle is being driven with some damage).

Automatic cancellation A chime sounds under the following conditions and the control is automatically canceled. ● When the vehicle speed falls below approximately 20 MPH (32 km/h) SSD0284A

NOTE: The approach warning chime may sound and the system display may blink when the ICC sensor A which are fitted on detects some reflectors 䊊 vehicles in other lanes or on the side of the road. This may cause the ICC system to decelerate or accelerate the vehicle. The ICC sensor may detect these reflectors when the vehicle is driven on winding roads, hilly roads or when entering or exiting a curve. The ICC sensor may also detect reflectors on narrow roads or in road construction zones. In these cases you will have to manually control the proper distance ahead of your vehicle.

● When the selector lever is not in the D (Drive), DS (Drive Sport) or manual shift mode ● When the windshield wipers are operated at low speed (LO) or high speed (HI) ● When the rain sensing auto wiper system is operated and the wiper speed is at least the same as the LO (low ) position speed ● When the VDC is turned off ● When the VDC operates

SSD0614

Warning light and display Condition A : The chime sounds and the Intelligent Cruise Control system is canceled automatically in the conditions described below. Part of the system display will come on or blink, making it impossible to set. ● When the VDC is turned off ● When the ABS or VDC (including the traction control system) operates ● When a tire slips ● When strong light (sunlight, etc.) is directly shining on the front of the vehicle

5-36 Starting and driving

Action to take : When the conditions listed above are no longer present, turn the system off using the Intelligent Cruise Control MAIN Switch. Turn the ICC system back on to use the system.

SSD0615

SSD0616

Condition B :

Condition C :

When the sensor window is dirty, making it impossible to detect a vehicle ahead, the ICC system is automatically canceled.

When the ICC system is not operating properly, the chime sounds and the ICC system warning light (orange) will come on.

The chime sounds and the ICC system warning light (orange) will come on and the “CLEAN SENSOR” indicator will appear.

Action to take :

Action to take : If the warning light comes on, park the vehicle in a safe place, turn the engine off. Clean the sensor window with a soft cloth and then perform the settings again.

If the warning light comes on, park the vehicle in a safe place. Turn the engine off, restart the engine, resume driving and set the ICC system again.

Starting and driving 5-37

Sensor maintenance

If it is not possible to set the system or the indicator stays on, it may indicate that the ICC system is malfunctioning. Although the vehicle is still driveable under normal conditions, have the vehicle checked at an INFINITI retailer.

A is located The sensor for the ICC system 䊊 below the front bumper.

To keep the ICC system operating properly, be sure to observe the following: ● Always keep the sensor clean. Wipe with a soft cloth carefully so as not to damage the sensor.

SSD0662

Type A

● Do not strike or damage the areas around the sensor. Do not touch or remove the screw located on the sensor. Doing so could cause failure or malfunction. If the sensor is damaged due to an accident, contact an INFINITI retailer. ● Do not attach a sticker (including transparent material) or install an accessory near the sensor. This could cause failure or malfunction.

CONVENTIONAL (FIXED SPEED) CRUISE CONTROL MODE This mode allows driving at a speed between 25 to 89 MPH (40 to 144 km/h) without keeping your foot on the accelerator pedal. SSD1169

Type B

5-38 Starting and driving

WARNING ● In the conventional (fixed speed) cruise control mode, a warning chime does not sound to warn you if you are too close to the vehicle ahead, as neither the presence of the vehicle ahead nor the vehicle-to-vehicle distance is detected. ● Pay special attention to the distance between your vehicle and the vehicle ahead of you or a collision could occur. ● Always confirm the setting in the Intelligent Cruise Control system display. ● Do not use the conventional (fixed speed) cruise control mode when driving under the following conditions: – when it is not possible to keep the vehicle at a set speed – in heavy traffic or in traffic that varies in speed – on winding or hilly roads – on slippery roads (rain, snow, ice, etc.) – in very windy areas ● Doing so could cause a loss of vehicle control and result in an accident.

SSD0617

SSD0618

Conventional (fixed speed) cruise control switch

Conventional (fixed speed) cruise control mode display and indicators

1) RESUME/ACCELERATE switch: Resumes set speed or increases speed incrementally. 2) SET/COAST switch: Sets the desired cruise speed, reduces speed incrementally. 3) CANCEL switch: Deactivates the system without erasing the set speed. 4) MAIN switch: Master switch to activate the system.

The display is located between the speedometer and tachometer. 1) MAIN switch indicator: Indicates that the MAIN switch is ON. 2) Cruise set switch indicator: Displays while the vehicle speed is controlled by the conventional (fixed speed) cruise control mode of the ICC system.

Starting and driving 5-39

3) Cruise system warning light:

When the ignition switch is pushed to the OFF position, the system is also automatically turned off. To use the Intelligent Cruise Control again, quickly push and release the MAIN switch (vehicle-to-vehicle distance control mode) or push and hold it (conventional cruise control mode) again to turn it on.

Comes on if there is a malfunction in the cruise control system.

CAUTION To avoid accidentally engaging cruise control, make sure to turn the MAIN switch off when not using the Intelligent Cruise Control system. SSD0619

Operating conventional (fixed speed) cruise control mode To turn on the conventional (fixed speed) cruise control mode, push and hold the MAIN switch A for longer than about 1.5 seconds. 䊊 When pushing the MAIN switch on, the Intelligent Cruise Control system display and the CRUISE indicator are displayed on the dot matrix crystal display. After you hold the MAIN switch on for longer than about 1.5 seconds, the Intelligent Cruise Control system display goes out. The CRUISE indicator stays lit. You can now set your desired cruising speed. Pushing the MAIN switch again will turn the system completely off.

5-40 Starting and driving

To cancel the preset speed, use any of the following methods: a) Push the CANCEL button. The SET indicator will go out. b) Tap the brake pedal. The SET indicator will go out. c) Turn the MAIN switch off. Both the CRUISE indicator and SET indicator will go out. To reset at a faster cruising speed, use one of the following three methods: SSD0620

To set cruising speed, accelerate your vehicle to the desired speed, push the SET/COAST switch and release it. (The SET indicator will come on in the display.) Take your foot off the accelerator pedal. Your vehicle will maintain the set speed.

a) Depress the accelerator pedal. When the vehicle attains the desired speed, push and release the SET/COAST switch. b) Push and hold the RESUME/ACCELERATE set switch. When the vehicle attains the speed you desire, release the switch.

● To pass another vehicle, depress the accelerator pedal. When you release the pedal, the vehicle will return to the previously set speed.

c) Push, then quickly release the RESUME/ACCELERATE switch. Each time you do this, the set speed will increase by about 1 MPH (1.6 km/h).

● The vehicle may not maintain the set speed when going up or down steep hills. If this happens, manually maintain vehicle speed.

To reset at a slower cruising speed, use one of the following three methods: a) Lightly tap the brake pedal. When the vehicle attains the desired speed, push the SET/COAST switch and release it.

b) Push and hold the SET/COAST switch. Release the switch when the vehicle slows down to the desired speed. c) Push, then quickly release the SET/COAST switch. Each time you do this, the set speed will decrease by about 1 MPH (1.6 km/h). To resume the preset speed, push and release the RESUME/ACCELERATE switch. The vehicle will resume the last set cruising speed when the vehicle speed is over 25 MPH (40 km/h).

Automatic cancellation A chime sounds under the following conditions and the control is automatically canceled. ● When the vehicle slows down more than 8 MPH (13 km/h) below the set speed ● When the vehicle speed falls below approximately 20 MPH (32 km/h) ● When the selector lever is not in the D (Drive), DS (Drive Sport) or manual shift mode ● When the VDC operates (including the traction control system) ● When a tire slips

Starting and driving 5-41

BREAK-IN SCHEDULE PREVIEW FUNCTION (for Intelligent Cruise Control system equipped models) The ICC system with the preview function identifies the need to apply emergency braking by sensing the vehicle ahead in the same lane and the distance to the vehicle ahead and relative speed from it, it applies the brake pre-pressure before the driver depresses the brake pedal and helps improve brake response by reducing pedal free play. SSD0621

Warning light When the system is not operating properly, the chime sounds and the system warning light (orange) will come on. Action to take : If the warning light comes on, park the vehicle in a safe place. Turn the engine off, restart the engine, resume driving and then perform the setting again. If it is not possible to set or the indicator stays on, it may indicate that the system is malfunctioning. Although the vehicle is still driveable under normal conditions, have the vehicle checked at an INFINITI retailer.

5-42 Starting and driving

For more details, see “BRAKE ASSIST” later in this section.

CAUTION During the first 1,200 miles (2,000 km), follow these recommendations to obtain maximum engine performance and ensure the future reliability and economy of your new vehicle. Failure to follow these recommendations may result in shortened engine life and reduced engine performance. ● Avoid driving for long periods at constant speed, either fast or slow. Do not run the engine over 4,000 rpm. ● Do not accelerate at full throttle in any gear. ● Avoid quick starts. ● Avoid hard braking as much as possible.

INCREASING FUEL ECONOMY ● Accelerate slowly and smoothly. Maintain cruising speeds with a constant accelerator position.

● When cruising at highway speeds, it is more economical to use the air conditioner and leave the windows closed to reduce drag.

● Drive at moderate speeds on the highway. ● Avoid unnecessary stopping and braking. Keep a safe distance behind other vehicles. ● Select a gear range suitable to road conditions. ● Avoid unnecessary prolonged engine idling. ● Keep your engine tuned up. ● Follow the recommended periodic maintenance schedule. ● Keep the tires inflated at the correct pressure. Improper tire pressure will increase wear and waste fuel. ● Make sure the front wheels are properly aligned. Improper alignment will cause premature tire wear and lower fuel economy. ● Climate control operation lowers fuel economy. Use the air conditioner only when necessary.

Starting and driving 5-43

PARKING/PARKING ON HILLS 1. Firmly apply the parking brake. 2. Automatic transmission models: Move the selector lever to the P (Park) position. Manual transmission models: Place the shift lever in the R (Reverse) gear. When parking on an uphill grade, place the shift lever in the 1st gear.

SD1006MA

● Never leave the engine running while the vehicle is unattended.

● Safe parking procedures require that both the parking brake be applied and the transmission placed into P (Park) for Automatic Transmission (AT) model or in an appropriate gear for Manual Transmission (MT) model. Failure to do so could cause the vehicle to move unexpectedly or roll away and result in an accident.

● Do not leave children unattended inside the vehicle. They could unknowingly activate switches or controls. Unattended children could become involved in serious accidents.

● Make sure the automatic transmission selector lever has been pushed as far forward as it can go and cannot be moved without depressing the foot brake pedal.

WARNING ● Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire.

5-44 Starting and driving

3. To help prevent the vehicle from rolling into the street when parked on a sloping drive way, it is a good practice to turn the wheels as illustrated. 1 ● HEADED DOWNHILL WITH CURB: 䊊

Turn the wheels into the curb and move the vehicle forward until the curb side wheel gently touches the curb. 2 ● HEADED UPHILL WITH CURB: 䊊

Turn the wheels away from the curb and move the vehicle back until the curb side wheel gently touches the curb. ● HEADED UPHILL OR DOWNHILL, NO CURB: 3 䊊

Turn the wheels toward the side of the road so the vehicle will move away from the center of the road if it moves.

SONAR SYSTEM (if so equipped) 4. Push the ignition switch to the OFF position.

SSD0927

WARNING ● The sonar system is a convenience but it is not a substitute for proper parking. Always look around and check that it is safe to do so before parking. Always move slowly. ● Read and understand the limitations of the sonar system as contained in this section. Inclement weather may affect the function of the sonar system; this may include reduced performance or a false activation. ● This system is not designed to prevent contact with small or moving objects.

● The system is designed as an aid to the driver in detecting large stationary objects to help avoid damaging the vehicle. The system will not detect small objects below the bumper, and may not detect objects close to the bumper or on the ground. ● If your vehicle sustains damage to the bumper fascia, leaving it misaligned or bent, the sensing zone may be altered causing inaccurate measurement of obstacles or false alarms.

Starting and driving 5-45

Keep the interior of the vehicle as quiet as possible to hear the tone clearly.

Keep the corner/center sonar (located on the bumper fascia) free from snow, ice and large accumulations of dirt (do not clean the sonar with sharp objects). If the sonar is covered, it will affect the accuracy of the sonar system.

The sonar system sounds a tone to warn the driver of obstacles near the bumper. When the “Sonar Display” key is ON, the sonar indicator will also appear in the center display. (See “SONAR INDICATOR” later in this section.) The system detects rear obstacles when the selector or shift lever is in the R (Reverse) position.

The sensitivity level of the corner/center sonar can be adjusted (higher or lower) in the SONAR setting display. (See “HOW TO USE SETTING BUTTON” in the “4. Monitor, climate, audio, phone and voice recognition systems” section for the “Sonar” settings.)

CAUTION

The system may not detect objects at speeds above 6 MPH (10 km/h) and may not detect certain angular or moving objects. The sonar system detects obstacles up to 3.9 ft (1.2 m) from the bumper with a decreased coverage area at the outer corners of the bumper. Refer to the illustration for approximate zone coverage areas. As you move closer to the obstacle, the rate of the tone increases. When the obstacle is less than 11.8 in (30 cm) away, the tone will sound continuously.

SSD0928 1 䊊 A 䊊 B 䊊

Rear view monitor display Corner sonar indicator Center sonar indicator

SONAR INDICATOR With the “Sonar Display” key ON in the “Sonar” settings, when the corner/center sonar detects obstacles near the bumper, a tone will sound and the sonar indicator will appear in the center display. When the rear view monitor is displayed, the sonar indicator will appear in the 1 . upper corner of the display 䊊

A and 䊊 B indicate the The sonar indicators 䊊 position of the object and the distance to the object with its color and rate of blinking.

5-46 Starting and driving

POWER STEERING When an object is detected, the indicator (green) appears and blinks (the tone sounds intermittently). When the vehicle moves closer to the object, the color of the indicator turns yellow and the rate of blinking increases (the rate of the tone increases). When the corner of the vehicle is very close to the object, less than 11.8 in (30 cm) away, the indicator stops blinking and turns red (the tone sounds continuously). When the rear view monitor is displayed, the colors of the sonar indicator and the distance guide lines in the rear view indicate different distances to the object. The sonar indicator can be turned off in the SONAR setting display. (See “HOW TO USE SETTING BUTTON” in the “4. Monitor, climate, audio, phone and voice recognition systems” section for the “Sonar” settings.) When the sonar indicator is off, only a tone sounds when the sonar detects obstacles.

WARNING If the engine is not running or is turned off while driving, the power assist for the steering will not work. Steering will be harder to operate. The power assisted steering uses a hydraulic pump, driven by the engine, to assist steering.

SSD0929

If the engine stops or the drive belt breaks, you will still have control of the vehicle. However, much greater steering effort is needed, especially in sharp turns and at low speeds.

SONAR SYSTEM OFF SWITCH The sonar system OFF switch on the instrument panel allows the driver to turn the sonar system on and off. To turn the sonar system on and off, the ignition switch must be in the “ON” posi1 on the switch will tion. The indicator light 䊊 illuminate when the system is turned off. If the indicator light flashes when the sonar system is not turned off, it may indicate a malfunction in the sonar system.

Starting and driving 5-47

BRAKE SYSTEM BRAKING PRECAUTIONS

PARKING BRAKE BREAK-IN

The brake system has two separate hydraulic circuits. If one circuit malfunctions, you will still have braking at two wheels.

Break in the parking brake shoes whenever the stopping effect of the parking brake is weakened or whenever the parking brake shoes and/or drums/rotors are replaced, in order to assure the best braking performance.

● While driving on a slippery surface, be careful when braking, accelerating or downshifting. Abrupt braking or accelerating could cause the wheels to skid and result in an accident.

This procedure is described in the vehicle service manual and can be performed by an INFINITI retailer.

● If the engine is not running or is turned off while driving, the power assist for the brakes will not work. Braking will be harder.

Vacuum assisted brakes The brake booster aids braking by using engine vacuum. If the engine stops, you can stop the vehicle by depressing the brake pedal. However, greater foot pressure on the brake pedal will be required to stop the vehicle and the stopping distance will be longer. When the brake pedal is depressed slowly and firmly, you may hear a clicking noise and feel a slight pulsation. This is normal and indicates that the Brake Assist System is operating.

Wet brakes When the vehicle is washed or driven through water, the brakes may get wet. As a result, your braking distance will be longer and the vehicle may pull to one side during braking. To dry brakes, drive the vehicle at a safe speed while lightly tapping the brake pedal to heat-up the brakes. Do this until the brakes return to normal. Avoid driving the vehicle at high speeds until the brakes function correctly.

5-48 Starting and driving

Using the brakes Avoid resting your foot on the brake pedal while driving. This will cause overheating of the brakes, wearing out the brake and pads faster and reduce gas mileage. To help save the brakes and to prevent the brakes from overheating, reduce speed and downshift to a lower gear before going down a slope or long grade. Overheated brakes may reduce braking performance and could result in loss of vehicle control.

WARNING

BRAKE ASSIST BRAKE ASSIST When the force applied to the brake pedal exceeds a certain level, the Brake Assist is activated generating greater braking force than a conventional brake booster even with light pedal force.

WARNING The Brake Assist is only an aid to assist braking operation and is not a collision warning or avoidance device. It is the driver’s responsibility to stay alert, drive safely and be in control of the vehicle at all times.

PREVIEW FUNCTION (Intelligent Cruise Control system equipped models) When the Preview Function identifies the need to apply emergency braking by sensing a vehicle ahead in the same lane and the distance and relative speed from it, it applies the brake pre-pressure before the driver depresses the brake pedal and helps improve brake response by reducing pedal free play. ● This system will not operate when the vehicle is moving at approximately 20 MPH (32 km/h) or less.

● The pre-pressure function ceases when the following conditions are met: a) When the driver depresses the accelerator pedal or the brake pedal. b) If the driver does not operate the accelerator or brake pedal within approximately 1 second.

SSD0338

● The sensor will not detect: a) Pedestrians or objects in the roadway b) Oncoming vehicles in the same lane c) Motorcycles traveling offset in the travel lane as illustrated

WARNING ● This system is only an aid to assist braking operation and is not a collision warning or avoidance device. It is the driver’s responsibility to stay alert, drive safely and be in control of the vehicle at all times.

Starting and driving 5-49

● As there is a performance limit to the Preview Function, never rely solely on this system. This system does not correct careless inattentive or absent-minded driving, or overcome poor visibility in rain, fog, or other bad weather. Reduce vehicle speed by depressing the brake pedal, in order to maintain a safe distance between vehicles. ● The system may not detect the vehicle in front of you in certain road or weather conditions. The Preview Function may not operate properly under the following conditions. The vehicle is still driveable under normal conditions and the Brake Assist will operate. – When rain, snow or dirt adhere to the system sensor – When strong light (for example, at sunrise or sunset) is directly shining on the front of the vehicle – Winding or hilly roads may cause the sensor to temporarily not detect a vehicle in the same lane or may detect objects or vehicles in other lanes. – Vehicle position in the lane may cause the sensor to temporarily not detect a vehicle in the same lane or may detect objects or vehicles in other lanes.

5-50 Starting and driving

● When the Preview Function operates, the brake pedal may move slightly and may make a small noise. This is not a system malfunction.

SSD0471

Warning light and display When the Preview Function is not operating properly, a chime sounds and the system warning light (orange) will come on. Action to take : If the warning light comes on, park the vehicle in a safe place. Turn the engine off, restart the engine and resume driving. If the indicator stays on, it may indicate that the Preview Function is malfunctioning (the brake is operative). Although the Vehicle is still driveable under normal conditions, have the vehicle checked at an INFINITI retailer.

How to handle the sensor The sensor for the Preview Function is common with Intelligent Cruise Control and is located below the front bumper. To keep the Preview Function operating properly, be sure to observe the following: ● Always keep the sensor clean. Wipe with a soft cloth carefully so as not to damage the sensor. ● Do not strike or damage the areas around the sensor. Do not touch or remove the screw located on the sensor. Doing so could cause failure or malfunction. If the sensor is damaged due to an accident, contact an INFINITI retailer. ● Do not attach a sticker (including transparent material) or install an accessory near the sensor. This could cause failure or malfunction.

ANTI-LOCK BRAKING SYSTEM (ABS) WARNING ● The Anti-lock Braking System (ABS) is a sophisticated device, but it cannot prevent accidents resulting from careless or dangerous

driving techniques. It can help maintain vehicle control during braking on slippery surfaces. Remember that stopping distances on slippery surfaces will be longer than on normal surfaces even with ABS. Stopping distances may also be longer on rough, gravel or snow covered roads, or if you are using tire chains. Always maintain a safe distance from the vehicle in front of you. Ultimately, the driver is responsible for safety. ● Tire type and condition may also affect braking effectiveness. – When replacing tires, install the specified size of tires on all four wheels. – When installing a spare tire, make sure that it is the proper size and type as specified on the Tire and Loading Information label. See “TIRE AND LOADING INFORMATION LABEL” in the “9. Technical and consumer information” section of this manual. – For detailed information, see “WHEELS AND TIRES” in the “8. Maintenance and do-it-yourself” section of this manual. The Anti-lock Braking System (ABS) controls the brakes so the wheels do not lock during hard braking or when braking on slippery surfaces. The system detects the rotation speed at each

wheel and varies the brake fluid pressure to prevent each wheel from locking and sliding. By preventing each wheel from locking, the system helps the driver maintain steering control and helps to minimize swerving and spinning on slippery surfaces.

Using the system Depress the brake pedal and hold it down. Depress the brake pedal with firm steady pressure, but do not pump the brakes. The ABS will operate to prevent the wheels from locking up. Steer the vehicle to avoid obstacles.

WARNING Do not pump the brake pedal. Doing so may result in increased stopping distances.

Self-test feature The ABS includes electronic sensors, electric pumps, hydraulic solenoids and a computer. The computer has a built-in diagnostic feature that tests the system each time you start the engine and move the vehicle at a low speed in forward or reverse. When the self-test occurs, you may hear a “clunk” noise and/or feel a pulsation in the brake pedal. This is normal and does not indicate a malfunction. If the computer senses a malfunction, it switches the ABS off

Starting and driving 5-51

VEHICLE DYNAMIC CONTROL (VDC) SYSTEM and illuminates the ABS warning light on the instrument panel. The brake system then operates normally, but without anti-lock assistance. If the ABS warning light illuminates during the self-test or while driving, have the vehicle checked by an INFINITI retailer.

Normal operation The ABS operates at speeds above 3 to 6 MPH (5 to 10 km/h). When the ABS senses that one or more wheels are close to locking up, the actuator rapidly applies and releases hydraulic pressure. This action is similar to pumping the brakes very quickly. You may feel a pulsation in the brake pedal and hear a noise from under the hood or feel a vibration from the actuator when it is operating. This is normal and indicates that the ABS is operating properly. However, the pulsation may indicate that road conditions are hazardous and extra care is required while driving.

The Vehicle Dynamic Control (VDC) system uses various sensors to monitor driver inputs and vehicle motion. Under certain driving conditions, the VDC system helps to perform the following functions. ● Controls brake pressure to reduce wheel slip on one slipping drive wheel so power is transferred to a non slipping drive wheel on the same axle. ● Controls brake pressure and engine output to reduce drive wheel slip based on vehicle speed (traction control function). ● Controls brake pressure at individual wheels and engine output to help the driver maintain control of the vehicle in the following conditions: – understeer (vehicle tends to not follow the steered path despite increased steering input) – oversteer (vehicle tends to spin due to certain road or driving conditions). The VDC system can help the driver to maintain control of the vehicle, but it cannot prevent loss of vehicle control in all driving situations.

5-52 Starting and driving

When the VDC system operates, the VDC warnin the instrument panel flashes ing light so note the following: ● The road may be slippery or the system may determine some action is required to help keep the vehicle on the steered path. ● You may feel a pulsation in the brake pedal and hear a noise or vibration from under the hood. This is normal and indicates that the VDC system is working properly. ● Adjust your speed and driving to the road conditions. See “Vehicle Dynamic Control (VDC) warning light” in the “2. Instruments and controls” section. If a malfunction occurs in the system, the VDC illuminates in the instruwarning light ment panel. The VDC system automatically turns off. The VDC OFF switch is used to turn off the VDC illuminates system. The VDC off indicator to indicate the VDC system is off. When the VDC switch is used to turn off the system, the VDC system still operates to prevent one drive wheel from slipping by transferring power to a non slipping drive wheel. The VDC warning light flashes if this occurs. All other VDC functions are off, and the VDC warning light

will not flash. The VDC system is automatically reset to on when the ignition switch is placed in the off position then back to the on position. See “Vehicle Dynamic Control (VDC) warning light” in the “2. Instruments and controls” section and “Vehicle Dynamic Control (VDC) off indicator light” in the “2. Instruments and controls” section. The computer has a built-in diagnostic feature that tests the system each time you start the engine and move the vehicle forward or in reverse at a slow speed. When the self-test occurs, you may hear a “clunk” noise and/or feel a pulsation in the brake pedal. This is normal and is not an indication of a malfunction.

WARNING ● The VDC system is designed to help the driver maintain stability but does not prevent accidents due to abrupt steering operation at high speeds or by careless or dangerous driving techniques. Reduce vehicle speed and be especially careful when driving and cornering on slippery surfaces and always drive carefully.

● Do not modify the vehicle’s suspension. If suspension parts such as shock absorbers, struts, springs, stabilizer bars, bushings and wheels are not INFINITI recommended for your vehicle or are extremely deteriorated, the VDC system may not operate properly. This could adversely affect vehicle handling performance, and the VDC warning may illuminate. light

● If wheels or tires other than the INFINITI recommended ones are used, the VDC system may not operate properly and the VDC warnmay illuminate. ing light ● The VDC system is not a substitute for winter tires or tire chains on a snow covered road.

● If brake related parts such as brake pads, rotors and calipers are not INFINITI recommended or are extremely deteriorated, the VDC system may not operate properly and may illuminate. the VDC warning light ● If engine control related parts are not INFINITI recommended or are extremely demay teriorated, the VDC warning light illuminate. ● When driving on extremely inclined surfaces such as higher banked corners, the VDC system may not operate properly and the VDC may illuminate. Do not warning light drive on these types of roads. ● When driving on an unstable surface such as a turntable, ferry, elevator or ramp, the VDC may illuminate. This is warning light not a malfunction. Restart the engine after driving onto a stable surface.

Starting and driving 5-53

COLD WEATHER DRIVING FREEING A FROZEN DOOR LOCK

TIRE EQUIPMENT

To prevent a door lock from freezing, apply deicer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole or use the Intelligent Key system.

SUMMER tires have a tread designed to provide superior performance on dry pavement. However, the performance of these tires will be substantially reduced in snowy and icy conditions. If you operate your vehicle on snowy or icy roads, INFINITI recommends the use of MUD & SNOW or ALL SEASON tires on all four wheels. Consult an INFINITI retailer for the tire type, size, speed rating and availability information.

ANTIFREEZE In the winter when it is anticipated that the outside temperature will drop below 32°F (0°C), check antifreeze to assure proper winter protection. For additional information, see “ENGINE COOLING SYSTEM” in the “8. Maintenance and do-it-yourself” section.

BATTERY If the battery is not fully charged during extremely cold weather conditions, the battery fluid may freeze and damage the battery. To maintain maximum efficiency, the battery should be checked regularly. For additional information, see “BATTERY” in the “8. Maintenance and do-it-yourself” section.

DRAINING OF COOLANT WATER If the vehicle is to be left outside without antifreeze, drain the cooling system, including the engine block. Refill before operating the vehicle. For details, see “ENGINE COOLING SYSTEM” in the “8. Maintenance and do-it-yourself” section.

5-54 Starting and driving

For additional traction on icy roads, studded tires may be used. However, some U.S. states and Canadian provinces prohibit their use. Check local, state and provincial laws before installing studded tires.

● A sturdy, flat board to be placed under the jack to give it firm support. ● A shovel to dig the vehicle out of snowdrifts. ● Extra window washer fluid to refill the reservoir tank.

DRIVING ON SNOW OR ICE WARNING ● Wet ice (32°F, 0°C and freezing rain), very cold snow or ice can be slick and very hard to drive on. The vehicle will have much less traction or “grip” under these conditions. Try to avoid driving on wet ice until the road is salted or sanded.

Skid and traction capabilities of studded snow tires, on wet or dry surfaces, may be poorer than that of non-studded snow tires.

● Whatever the condition, drive with caution. Accelerate and slow down with care. If accelerating or downshifting too fast, the drive wheels will lose even more traction.

Tire chains may be used. For details, see “TIRE CHAINS” in the “8. Maintenance and do-ityourself” section of this manual.

● Allow more stopping distance under these conditions. Braking should be started sooner than on dry pavement.

SPECIAL WINTER EQUIPMENT

● Allow greater following distances on slippery roads.

It is recommended that the following items be carried in the vehicle during winter: ● A scraper and stiff-bristled brush to remove ice and snow from the windows and wiper blades.

● Watch for slippery spots (glare ice). These may appear on an otherwise clear road in shaded areas. If a patch of ice is seen ahead, brake before reaching it. Try not to brake while on the ice, and avoid any sudden steering maneuvers. ● Do not use the cruise control on slippery roads. ● Snow can trap dangerous exhaust gases under your vehicle. Keep snow clear of the exhaust pipe and from around your vehicle.

ENGINE BLOCK HEATER (if so equipped) Engine block heaters are used to assist in cold temperature starting. The engine block heater should be used when the outside temperature is 20°F (⫺7°C) or lower.

To use the engine block heater 1. Turn the engine off. 2. Open the hood and unwrap the engine block heater cord. 3. Plug the engine block heater cord into a grounded 3-wire, 3-pronged extension cord. 4. Plug the extension cord into a Ground Fault Interrupt (GFI) protected, grounded 110-volt AC (VAC) outlet.

WARNING ● Do not use your engine block heater with an ungrounded electrical system or a 2-pronged adapter. You can be seriously injured by an electrical shock if you use an ungrounded connection. ● Disconnect and properly store the engine block heater cord before starting the engine. Damage to the cord could result in an electrical shock and can cause serious injury. ● Use a heavy-duty 3-wire, 3-pronged extension cord rated for at least 10A. Plug the extension cord into a Ground Fault Interrupt (GFI) protected, grounded 110-VAC outlet. Failure to use the proper extension cord or a grounded outlet can result in a fire or electrical shock and cause serious personal injury.

5. The engine block heater must be plugged in for at least 2 - 4 hours, depending on outside temperatures, to properly warm the engine coolant. Use an appropriate timer to turn the engine block heater on. 6. Before starting the engine, unplug and properly store the cord to keep it away from moving parts.

Starting and driving 5-55

MEMO

5-56 Starting and driving

6 In case of emergency

Roadside assistance program . . . . . . . . . . . . . . . . . . . . . . 6-2 Emergency engine shut off . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Flat tire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Tire Pressure Monitoring System (TPMS) . . . . . . . . . 6-2 Repairing flat tire (for models with emergency tire puncture repair kit) . . . . . . . . . . . . . . 6-3 Changing flat tire (for models with spare tire) . . . . . . . . . . . . . . . . . . . . . 6-8

Jump starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Push starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . If your vehicle overheats . . . . . . . . . . . . . . . . . . . . . . . . . . Towing your vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Towing recommended by INFINITI . . . . . . . . . . . . . . . Vehicle recovery (Freeing a stuck vehicle) . . . . . . .

6-14 6-16 6-16 6-17 6-18 6-19

ROADSIDE ASSISTANCE PROGRAM

EMERGENCY ENGINE SHUT OFF

FLAT TIRE

Every new INFINITI comes with a 4 year, unlimited mileage Roadside Assistance plan. In the event of a roadside emergency, Roadside Assistance Service is available to you. Please refer to your Warranty Information Booklet (U.S.) or Warranty & Roadside Assistance Information Booklet (Canada) for details. Both the Warranty Information Booklet and Roadside Assistance Calling Card in your Owner’s Literature Portfolio provide the Toll-Free Number to call for assistance. Roadside Assistance is provided 24 hours a day, 365 days a year, for 4 years from the date sold to give emergency roadside help, in the event of mechanical or nonmechanical trouble(s) such as flat tires, out-of-gas, dead battery, lost keys, mechanical breakdown, accident, etc.

To shut off the engine in an emergency situation while driving, perform the following procedure:

TIRE PRESSURE MONITORING SYSTEM (TPMS)

6-2 In case of emergency

● Rapidly push the push-button ignition switch 3 consecutive times, or ● Push and hold the push-button ignition switch for more than 2 seconds.

This vehicle is equipped with the Tire Pressure Monitoring System (TPMS). It monitors tire pressure of all tires except the spare. When the low tire pressure warning light is lit and the CHECK TIRE PRESSURE warning appears on the dot matrix crystal display, one or more of your tires is significantly under-inflated. If the vehicle is being driven with low tire pressure, the TPMS will activate and warn you of it by the low tire pressure warning light. This system will activate only when the vehicle is driven at speeds above 16 MPH (25 km/h). For more details, see “WARNING/INDICATOR LIGHTS AND AUDIBLE REMINDERS” in the “2. Instruments and controls” section and “TIRE PRESSURE MONITORING SYSTEM (TPMS)” in the “5. Starting and driving” section.

WARNING ● If the low tire pressure warning light illuminates while driving, avoid sudden steering maneuvers or abrupt braking, reduce vehicle speed, pull off the road to a safe location and stop the vehicle as soon as possible. Driving with under-inflated tires may permanently damage the tires and increase the likelihood of tire failure. Serious vehicle damage could occur and may lead to an accident and could result in serious personal injury. Check the tire pressure for all four tires. Adjust the tire pressure to the recommended COLD tire pressure shown on the Tire and Loading Information label to turn the low tire pressure warning light OFF. If the light still illuminates while driving after adjusting the tire pressure, a tire may be flat. If you have a flat tire, replace it with a spare tire as soon as possible. ● When a spare tire is mounted or a wheel is replaced, the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. Contact your INFINITI retailer as soon as possible for tire replacement and/or system resetting.

● Replacing tires with those not originally specified by INFINITI could affect the proper operation of the TPMS. ● Do not inject any tire liquid or aerosol tire sealant into the tires, as this may cause a malfunction of the tire pressure sensors (for models not equipped with the emergency tire puncture repair kit). ● If you used the Emergency Tire Sealant to repair a minor tire puncture, your INFINITI retailer will also need to replace the TPMS sensor in addition to repairing or replacing the tire (for models equipped with the emergency tire puncture repair kit). ● INFINITI recommends using only NISSAN Genuine Emergency Tire Sealant provided with your vehicle. Other tire sealants may damage the valve stem seal which can cause the tire to lose air pressure (for models equipped with the emergency tire puncture repair kit).

REPAIRING FLAT TIRE (for models with emergency tire puncture repair kit) WARNING ● After using Emergency Tire Sealant to repair a minor tire puncture, do not drive the vehicle at speeds faster than 50 MPH (80 km/h). ● Immediately after using the Emergency Tire Sealant to repair a minor tire puncture, take your vehicle to an INFINITI retailer to inspect, and repair or replace the tire. The Emergency Tire Sealant cannot permanently seal a punctured tire. Continuing operation of the vehicle without a permanent tire repair can lead to a crash. ● If you used the Emergency Tire Sealant to repair a minor tire puncture, your INFINITI retailer will also need to replace the TPMS sensor in addition to repairing or replacing the tire. ● INFINITI recommends using only INFINITI Genuine Emergency Tire Sealant provided with your vehicle. Other tire sealants may damage the valve stem seal which can cause the tire to lose air pressure.

In case of emergency 6-3

This vehicle does not have a spare tire. The emergency tire puncture repair kit (Emergency Tire Sealant) is supplied with the vehicle instead of a spare tire. It can be used to temporarily repair minor tire punctures. If possible, have the vehicle towed to a facility that can repair or replace the flat tire. Using the emergency tire puncture repair kit may cause a malfunction of the tire pressure sensor and cause the low tire pressure warning light to illuminate. If you have a flat tire, follow the instructions below.

CAUTION ● To avoid the emergency tire puncture kit being damaged during storage or use: – Only use the emergency tire puncture repair kit on your vehicle. Do not use it on other vehicles. – Only use the kit to inflate the tires of your vehicle and to check the vehicle’s tire pressure. – Only plug the compressor into a 12V DC car power point. – Keep the kit free of water and dirt. – Do not disassemble or modify the kit.

6-4 In case of emergency

– Do not drop the kit or allow hard impacts to the kit. ● Do not use the emergency tire puncture repair kit under the following conditions. Contact an INFINITI retailer or professional road assistance. – when the sealant has passed its expiration date (shown on the label attached to the bottle) – when the cut or the puncture is approximately 0.16 in (4 mm) or longer – when the tire sidewall is damaged – when the vehicle has been driven with extremely low tire pressure – when the tire has come off the inside or the outside of the wheel. – when the tire wheel is damaged – when two or more tires are flat

Stopping the vehicle 1. Safely move the vehicle off the road and away from traffic. 2. Turn on the hazard warning flashers. 3. Park on a level surface and apply the parking brake.

4. Automatic Transmission models: Move the selector lever to the P (Park) position. Manual Transmission models: Move the shift lever to the R (Reverse) position. 5. Turn off the engine. 6. Raise the hood to warn other traffic and to signal professional road assistance personnel that you need assistance. 7. Have all passengers get out of the vehicle and stand in a safe place, away from traffic and clear of the vehicle.

WARNING Make sure the parking brake is securely applied and the manual transmission is shifted into R (Reverse) or the automatic transmission into P (Park). ● Never repair tires when the vehicle is on a slope, ice or slippery areas. This is hazardous. ● Never repair tires if oncoming traffic is close to your vehicle. Wait for professional road assistance.

NOTE: For models with the emergency tire puncture repair kit, a spare tire, jack and rod are not equipped as standard. These parts are dealer options. Contact an INFINITI retailer about obtaining these parts. See “CHANGING FLAT TIRE (for models with spare tire)” earlier in this section for usage of jacking tools and tire replacement.

Before using emergency tire puncture repair kit SCE0887

Getting emergency tire puncture repair kit Take out the emergency tire puncture repair kit located under the cargo room or in the trunk. The repair kit consists of the following items: 1 Tire sealant bottle 䊊 2 䊊 Air compressor 3 Speed restriction sticker 䊊

● If any foreign object (for example, a screw or nail) is embedded in the tire, do not remove it. ● Check the expiration date of the sealant (shown on the label attached to the bottle). Never use a sealant whose expiration date has passed.

Repairing tire WARNING Observe the following precautions when using the tire repair compound. ● Swallowing the compound is dangerous. Immediately drink as much water as possible and seek prompt medical assistance. ● Rinse well with lots of water if the compound comes into contact with skin or eyes. If irritation persists, seek prompt medical attention. ● Keep the repair compound out of the reach of children. ● The emergency repair compound may cause a malfunction of the tire pressure sensors and cause the low tire pressure warning light to illuminate. Have the tire pressure sensor replaced as soon as possible. NOTE: Do not remove any nails or screws that have penetrated the tire when performing repairs.

In case of emergency 6-5

SCE0867

SCE0869

1. Open the lid of the air compressor and take out the speed restriction sticker, then put it in a location where the driver can see it while driving.

3. Remove the cap from the tire sealant bottle, and screw the bottle clockwise onto the bottle holder. (Leave the bottle seal intact. Screwing the bottle onto the bottle holder will pierce the seal of the bottle.) 4. Remove the cap from the tire valve on the flat tire.

CAUTION Do not put the speed restriction label on the steering wheel pad, the speedometer or the warning light locations.

SCE0868 1 and the power plug 䊊 2 2. Take the hose 䊊 out of the air compressor. Remove the cap of the bottle holder from the air compressor.

6-6 In case of emergency

NOTE: The compressor tire pressure gauge may show a pressure reading of 87 psi (600 kPa) for about 30 seconds while inflating the tire. The pressure gauge is indicating the pressure inside the sealant can. When the sealant has been injected into the tire the pressure gauge will drop and indicate actual tire pressure.

WARNING SCE0870 A of the hose 5. Remove the protective cap 䊊 and screw the hose securely onto the tire valve. Make sure that the pressure reB is securely tightened. lease valve 䊊 Make sure that the air compressor switch is in the OFF (䡩) position, and then insert its power plug into the power outlet in the vehicle.

SCE0871

6. Push the ignition switch to the “ACC” position. Then turn the compressor switch to the ON (⫺) position and inflate the tire up to the pressure that is specified on the tire and loading information label affixed to the driver’s side center pillar if possible, or to the minimum of 26 psi (180 kPa). Turn the air compressor off briefly in order to check the tire pressure with the pressure gauge. If the tire is inflated to higher than the specified pressure, lower the tire pressure by releasing air with the pressure release valve.

● To avoid serious personal injury while using the emergency tire puncture repair kit: – Securely tighten the compressor hose to the tire valve. Failure to do so can cause the sealant to spray into the air and get into your eyes or on the skin. ● Do not stand directly beside the damaged tire while it is being inflated because of the risk of the rupture. If there are any cracks or bumps, turn the compressor off immediately. If the tire pressure does not increase to 26 psi (180 kPa) within 10 minutes , the tire may be seriously damaged and the tire cannot be repaired with this tire repair kit. Contact an INFINITI retailer.

In case of emergency 6-7

7. When the tire pressure is at the specified amount, turn the air compressor off. If the pressure cannot be inflated to the specified amount, the air compressor can be turned off at the minimum of 26 psi (180 kPa). Remove the power plug from the power outlet and quickly remove the hose from the tire valve. Attach the protective cap and valve cap. Properly stow the emergency tire puncture repair kit in the trunk.

CAUTION To avoid serious personal injury when stowing the emergency tire puncture repair kit: – Keep the sealant bottle screwed into the compressor. Failure to do so can cause the sealant to spray into the air and get into your eyes or on the skin. 8. Immediately drive the vehicle for 10 minutes or 2 MPH (3 km/h) at a speed of 50 MPH (80 km/h) or less.

9. After driving, make sure that the air compressor switch is in the OFF position, then screw the hose securely onto the tire valve. Check the tire pressure with the pressure gauge. The temporary repair is completed if the tire pressure does not drop. Make sure the pressure is adjusted to the pressure that is specified on the tire and loading information label before driving. 10. If the tire pressure drops, repeat the steps from 5 to 9. If the pressure drops again or under 19 psi (130 kPa), the tire cannot be repaired with this tire repair kit. Contact an INFINITI retailer. The sealant bottle and hose can not be reused to repair another punctured tire. Contact an INFINITI retailer to purchase replacements.

After repairing tire See an INFINITI retailer for repair/replacement as soon as possible.

tire

WARNING ● After using Emergency Tire Sealant to repair a minor tire puncture, do not drive the vehicle at speeds faster than 50 MPH (80 km/h).

6-8 In case of emergency

● Immediately after using Emergency Tire Sealant to repair a minor tire puncture, take your vehicle to an INFINITI retailer to inspect, and repair or replace the tire. The Emergency Tire Sealant cannot permanently seal a punctured tire. Continuing operation of the vehicle without a permanent tire repair can lead to a crash. ● If you used Emergency Tire Sealant to repair a minor tire puncture, your INFINITI retailer will also need to replace the TPMS sensor in addition to repairing or replacing the tire. ● INFINITI recommends using only INFINITI Genuine Emergency Tire Sealant provided with your vehicle. Other tire sealants may damage the valve stem seal which can cause the tire to lose air pressure.

CHANGING FLAT TIRE (for models with spare tire) If you have a flat tire, follow the instructions below.

Stopping the vehicle 1. Safely move the vehicle off the road and away from traffic. 2. Turn on the hazard warning flashers.

3. Park on a level surface and apply the parking brake. 4. Automatic Transmission model: Move the selector lever to the P (Park) position. Manual Transmission model: Move the shift lever to the R (Reverse) position. 5. Turn off the engine. 6. Raise the hood to warn other traffic, and to signal professional road assistance personnel that you need assistance. 7. Have all passengers get out of the vehicle and stand in a safe place, away from traffic and clear of the vehicle.

WARNING ● Make sure the parking brake is securely applied and the manual transmission is shifted into R (Reverse), or the automatic transmission into P (Park).

MCE0001A

Blocking wheels

SCE0804

Getting the spare tire and tools

Place suitable blocks 䊊 at both the front and back of the wheel diagonally opposite the flat tire to prevent the vehicle from moving when it is jacked up. 1

1. Fold the separator down. 2. Raise the trunk floor board, and then hang it on the edge of the trunk opening using the hook.

WARNING Be sure to block the wheel as the vehicle may move and result in personal injury.

● Never change tires when the vehicle is on a slope, ice or slippery areas. This is hazardous. ● Never change tires if oncoming traffic is close to your vehicle. Wait for professional road assistance.

In case of emergency 6-9

Jacking up the vehicle and removing the damaged tire WARNING ● Never get under the vehicle while it is supported only by the jack. If it is necessary to work under the vehicle, support it with safety stands.

SCE0800

SCE0801

3. Remove the jacking tool case. 4. Remove the retainer by turning it counterclockwise, and then remove the spare tire.

5. Remove the jack storage lid, and then remove the jack.

● Use only the jack provided with your vehicle to lift the vehicle. Do not use the jack provided with your vehicle on other vehicles. The jack is designed for lifting only your vehicle during a tire change. ● Use the correct jack-up points. Never use any other part of the vehicle for jack support. ● Never jack up the vehicle more than necessary. ● Never use blocks on or under the jack. ● Do not start or run the engine while vehicle is on the jack, as it may cause the vehicle to move. This is especially true for vehicles with limited slip differentials. ● Do not allow passengers to stay in the vehicle while it is on the jack.

6-10 In case of emergency

Carefully read the caution label attached to the jack body and the following instructions.

SCE0647

Jack-up point 1. Place the jack directly under the jack-up point as illustrated so the top of the jack contacts the vehicle at the jack-up point. Align the jack head between the two notches in the front or the rear as shown. Also fit the groove of the jack head between the notches as shown. The jack should be used on level firm ground.

In case of emergency 6-11

SCE0504

2. Loosen each wheel nut one or two turns by turning counterclockwise with the wheel nut wrench. Do not remove the wheel nuts until the tire is off the ground. 3. To lift the vehicle, securely hold the jack lever and rod with both hands as shown above. Carefully raise the vehicle until the tire clears the ground. Remove the wheel nuts, and then remove the tire.

6-12 In case of emergency

SCE0661

Installing the spare tire The T-type spare tire is designed for emergency use. (See specific instructions under the heading “WHEELS AND TIRES” in the “8. Maintenance and do-it-yourself” section.) 1. Clean any mud or dirt from the surface between the wheel and hub. 2. Carefully put the spare tire on and tighten the wheel nuts finger tight. Check that all the wheel nuts contact the wheel surface horizontally. When replacing a front tire, make sure that the hole in the spare tire wheel is aligned with the pin on the brake rotor.

3. With the wheel nut wrench, tighten wheel nuts alternately and evenly in the se4 ,䊊 5 ) 1 ,䊊 2 ,䊊 3 ,䊊 quence as illustrated (䊊 until they are tight. 4. Lower the vehicle slowly until the tire touches the ground. Then, with the wheel nut wrench, tighten the wheel nuts securely in the sequence as illustrated. Lower the vehicle completely.

WARNING ● Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to become loose or come off. This could cause an accident. ● Do not use oil or grease on the wheel studs or nuts. This could cause the nuts to become loose. ● Retighten the wheel nuts when the vehicle has been driven for 600 miles (1,000 km) (also in cases of a flat tire, etc.).

● As soon as possible, tighten the wheel nuts to the specified torque with a torque wrench.

WARNING

Wheel nut tightening torque: 80 ft-lb (108 N·m)

● Always make sure that the spare tire and jacking equipment are properly secured after use. Such items can become dangerous projectiles in an accident or sudden stop.

The wheel nuts must be kept tightened to specifications at all times. It is recommended that the wheel nuts be tightened to specifications at each lubrication interval.

● The spare tire is designed for emergency use. See specific instructions under the heading “WHEELS AND TIRES” in the “8. Maintenance and do-it-yourself” section.

● Adjust tire pressure to the COLD pressure. COLD pressure: After the vehicle has been parked for 3 hours or more or driven less than 1 mile (1.6 km). COLD tire pressures are shown on the Tire and Loading Information label affixed to the driver side center pillar. 5. Securely store the flat tire and jacking equipment in the vehicle. 6. Place the jacking tool case and the trunk floor board over the damaged tire. 7. Close the trunk.

If needed Roadside Assistance is available. Please see your Warranty Information Booklet or Roadside Assistance I.D. Card for the toll-free number to call (U.S.) or Warranty Information Booklet (Canada).

In case of emergency 6-13

JUMP STARTING To start your engine with a booster battery, the instructions and precautions below must be followed.

WARNING ● If done incorrectly, jump starting can lead to a battery explosion, resulting in severe injury or death. It could also damage your vehicle. ● Explosive hydrogen gas is always present in the vicinity of the battery. Keep all sparks and flames away from the battery. ● Do not allow battery fluid to come into contact with eyes, skin, clothing or painted surfaces. Battery fluid is a corrosive sulphuric acid solution which can cause severe burns. If the fluid should come into contact with anything, immediately flush the contacted area with water. ● Keep the battery out of the reach of children. ● The booster battery must be rated at 12 volts. Use of an improperly rated battery can damage your vehicle.

6-14 In case of emergency

● Whenever working on or near a battery, always wear suitable eye protectors (for example, goggles or industrial safety spectacles) and remove rings, metal bands, or any other jewelry. Do not lean over the battery when jump starting. ● Do not attempt to jump start a frozen battery. It could explode and cause serious injury. ● Your vehicle has an automatic engine cooling fan. It could come on at any time. Keep hands and other objects away from it. If needed, Roadside Assistance is available. Please see your Warranty Information Booklet or Roadside Assistance I.D. Card for the toll-free number to call (U.S.) or Warranty Information Booklet (Canada).

6. Connect jumper cables in the sequence as 1 → 䊊 2 → 䊊 3 → 䊊 4 ). illustrated (䊊 For models with a steering wheel lock mechanism: If the battery is disconnected or discharged, the steering wheel will lock and cannot be turned. Supply power using jumper cables before pushing the ignition switch and disengaging the steering lock.

CAUTION ● Always connect positive (+) to positive (+) and negative (⫺) to body ground (as illustrated) — not to the battery. SCE0653

WARNING

3. Automatic Transmission model:

Always follow the instructions below. Failure to do so could result in damage to the charging system and cause personal injury.

Move the selector lever to the P (Park) position.

1. If the booster battery is in another vehicle A , position the two vehicles (䊊 A and 䊊 B ) 䊊 to bring their batteries into close proximity to each other.

Move the shift lever to the N (Neutral) position.

Do not allow the two vehicles to touch. 2. Apply the parking brake.

Manual Transmission model:

4. Switch off all unnecessary electrical systems (headlights, heater, air conditioner, etc.). 5. Remove the vent caps on the battery (if so equipped). Cover the battery with a firmly C to reduce explowrung out moist cloth 䊊 sion hazard.

● Make sure the jumper cables do not touch moving parts in the engine compartment and that clamps do not contact any other metal. A 7. Start the engine of the booster vehicle 䊊 and let it run for a few minutes.

8. Keep the engine speed of the booster A at about 2,000 rpm, and start vehicle 䊊 B being jump the engine of the vehicle 䊊 started.

In case of emergency 6-15

PUSH STARTING

CAUTION Do not keep the starter motor engaged for more than 10 seconds. If the engine does not start right away, push the ignition switch to the OFF position and wait 10 seconds before trying again. 9. After starting your engine, carefully disconnect the negative cable and then the 4 → 䊊 3 → 䊊 2 → 䊊 1 ). positive cable (䊊 10. Replace the vent caps (if so equipped). Be sure to dispose of the cloth used to cover the vent holes as it may be contaminated with corrosive acid.

IF YOUR VEHICLE OVERHEATS

Do not attempt to start the engine by pushing.

CAUTION ● Automatic transmission models cannot be push-started or tow-started. Attempting to do so may cause transmission damage. ● Three way catalyst equipped models should not be started by pushing since the three way catalyst may be damaged. ● Never try to start the vehicle by towing it; when the engine starts, the forward surge could cause the vehicle to collide with the tow vehicle. If needed, Roadside Assistance is available. Please see your Warranty Information Booklet or Roadside Assistance I.D. Card for the toll-free number to call (U.S.) or Warranty & Roadside Assistance Information Booklet (Canada).

CAUTION ● Do not continue to drive if your vehicle overheats. Doing so could cause engine damage or a vehicle fire. ● To avoid the danger of being scalded, never remove the radiator cap while the engine is still hot. When the radiator cap is removed, pressurized hot water will spurt out, possibly causing serious injury. ● Do not open the hood if steam is coming out. If your vehicle is overheating (indicated by an extremely high temperature gauge reading), or if you feel a lack of engine power, detect abnormal noise, etc., take the following steps: 1. Move the vehicle safely off the road, apply the parking brake. 2. Automatic Transmission model: Move the selector lever to the P (Park) position. Manual Transmission model: Move the shift lever to the N (Neutral) position. Do not stop the engine.

6-16 In case of emergency

TOWING YOUR VEHICLE 3. Turn off the air conditioner. Open all the windows, move the heater or air conditioner temperature control to maximum hot and fan control to high speed. 4. If engine overheating is caused by climbing a long hill on a hot day, run the engine at a fast idle (approximately 1,500 rpm) until the temperature gauge indication returns to normal. 5. Get out of the vehicle. Look and listen for steam or coolant escaping from the radiator before opening the hood. (If steam or coolant is escaping, turn off the engine.) Do not open the hood further until no steam or coolant can be seen. 6. Open the engine hood.

WARNING Be careful not to allow your hands, hair, jewelry or clothing to come into contact with, or get caught in, engine belts or the engine cooling fan. The engine cooling fan can start at any time. 8. After the engine cools down, check the coolant level in the reservoir with the engine running. Add coolant to the reservoir if necessary. Have your vehicle repaired at the nearest INFINITI retailer. If needed, Roadside Assistance is available. Please see your Warranty Information Booklet or Roadside Assistance I.D. Card for the toll-free number to call (U.S.) or Warranty & Roadside Assistance Information Booklet (Canada).

When towing your vehicle, all State (Provincial in Canada) and local regulations for towing must be followed. Incorrect towing equipment could damage your vehicle. Towing instructions are available from an INFINITI retailer. Local service operators are familiar with the applicable laws and procedures for towing. To assure proper towing and to prevent accidental damage to your vehicle, INFINITI recommends that you have a service operator tow your vehicle. It is advisable to have the service operator carefully read the following precautions.

WARNING ● Never ride in a vehicle that is being towed. ● Never get under your vehicle after it has been lifted by a tow truck.

WARNING If steam or water is coming from the engine, stand clear to prevent getting burned. 7. Visually check the drive belt for damage or looseness. Also check if the cooling fan is running. The radiator hoses and radiator should not leak water. If coolant is leaking or the cooling fan does not run, stop the engine.

CAUTION ● When towing, make sure that the transmission, axles, steering system and drivetrain are in working condition. If any unit is damaged, dollies must be used. ● Always attach safety chains before towing.

In case of emergency 6-17

For information about towing your vehicle behind a recreational vehicle (RV), see “FLAT TOWING” in the “9. Technical and consumer information” section of this manual. If needed, Roadside Assistance is available. Please see your Warranty Information Booklet or Roadside Assistance I.D. Card for the toll-free number to call (U.S.) or Warranty & Roadside Assistance Information Booklet (Canada).

SCE0967

TOWING RECOMMENDED BY INFINITI INFINITI recommends that your vehicle be towed with the driving (rear) wheels off the ground or place the vehicle on a flat bed truck as illustrated.

CAUTION ● Never tow automatic transmission models with the rear wheels on the ground or four wheels on the ground (forward or backward), as this may cause serious and expensive damage to the drivetrain. If it is necessary to tow the vehicle with the front wheels raised, always use towing dollies under the rear wheels.

6-18 In case of emergency

● When towing rear wheel drive models with the front wheels on the ground or on towing dollies: Push the ignition switch to the ACC or ON position, and secure the steering wheel in a straight-ahead position with a rope or similar device. For models with a steering wheel lock mechanism: Never secure the steering wheel by selecting the LOCK position. This may damage the steering lock mechanism.

● If you have to tow manual transmission models with the rear wheels on the ground (if you do not use towing dollies) or four wheels on the ground: – Push the ignition switch to the ON position and turn off all accessories. – Always release the parking brake. – Move the transmission shift lever to the N (Neutral) position. – Observe the following restricted towing speeds and distances for manual transmission models only: ● Rear wheels on the ground: Speed: Below 50 MPH (80 km/h) Distance: Less than 50 miles (80 km)

VEHICLE RECOVERY (Freeing a stuck vehicle) WARNING ● Stand clear of a stuck vehicle. ● Do not spin your tires at high speed. This could cause them to explode and result in serious injury. Parts of your vehicle could also overheat and be damaged.

Pulling a stuck vehicle If your vehicle is stuck in sand, snow, mud, etc., use a tow strap or other device designed specifically for vehicle recovery. Always follow the manufacturer’s instructions for the recovery device.

SCE0893

● Four wheels on the ground: Speed: Below 70 MPH (112 km/h) Distance: Less than 500 miles (800 km) – If the speed or distance must necessarily be greater, remove the propeller shaft before towing to prevent damage to the drivetrain.

Front (except for Aerodynamic Package models) Front (except for Aerodynamic Package models): 1. To remove the hook cover from the bumper, insert a suitable tool into the mesh and take off the removable part.

In case of emergency 6-19

2. Securely install the vehicle recovery hook 1 stored with jacking tools as illustrated. 䊊 Make sure that the hook is properly secured in the original place after use.

SCE0964

Aerodynamic Package models Front (Aerodynamic Package models): 1 from the 1. To remove the hook cover 䊊 bumper, use a suitable tool. 2 and then pull it out. 2. Pull the cover up 䊊 3. Securely install the vehicle recovery hook stored with jacking tools.

6-20 In case of emergency

● Always pull the cable straight out from the front of the vehicle. Never pull on the vehicle at an angle. ● Pulling devices should be routed so they do not touch any part of the suspension, steering, brake or cooling systems. ● Pulling devices such as ropes or canvas straps are not recommended for use in vehicle towing or recovery.

SCE0894

● Release the accelerator pedal before shifting between R (Reverse) and D (Drive) (automatic transmission models) or 1st and R (Reverse) (manual transmission models). ● Do not spin the tires above 35 MPH (55 km/h). 5. If the vehicle cannot be freed after a few tries, contact a professional towing service to remove the vehicle.

If your vehicle is stuck in sand, snow, mud, etc., use the following procedure:

Rear Rear : Do not use the tie down hook vehicle recovery.

Rocking a stuck vehicle

● Apply the accelerator as little as possible to maintain the rocking motion.

䊊 for towing or 2

CAUTION ● Tow chains or cables must be attached only to the vehicle recovery hooks or main structural members of the vehicle. Otherwise, the vehicle body will be damaged. ● Do not use the vehicle tie downs to free a vehicle stuck in sand, snow, mud, etc. ● Never tow a vehicle using the vehicle tie downs or recovery hooks.

1. Turn off the Vehicle Dynamic Control (VDC) system. 2. Make sure the area in front and behind the vehicle is clear of obstructions. 3. Turn the steering wheel right and left to clear an area around the front tires. 4. Slowly rock the vehicle forward and backward. ● Shift back and forth between R (Reverse) and D (Drive) (automatic transmission models) or 1st and R (Reverse) (manual transmission models).

In case of emergency 6-21

MEMO

6-22 In case of emergency

7 Appearance and care

Cleaning exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Washing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Waxing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Removing spots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Underbody. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aluminum alloy wheels . . . . . . . . . . . . . . . . . . . . . . . . . Chrome parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tire dressing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cleaning interior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7-2 7-2 7-2 7-3 7-3 7-3 7-3 7-3 7-3 7-4

Air fresheners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Floor mats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Corrosion protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Most common factors contributing to vehicle corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Environmental factors influence the rate of corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . To protect your vehicle from corrosion . . . . . . . . . . .

7-4 7-4 7-5 7-6 7-6 7-6 7-6

CLEANING EXTERIOR In order to maintain the appearance of your vehicle, it is important to take proper care of it. To protect the paint surface, wash your vehicle as soon as you can: ● after a rainfall to prevent possible damage from acid rain ● after driving on coastal roads ● when contaminants such as soot, bird droppings, tree sap, metal particles or bugs get on the paint surface ● when dust or mud builds up on the surface Whenever possible, store or park your vehicle inside a garage or in a covered area. When it is necessary to park outside, park in a shady area or protect the vehicle with a body cover. Be careful not to scratch the paint surface when putting on or removing the body cover.

WASHING Wash dirt off the vehicle with a wet sponge and plenty of water. Clean the vehicle thoroughly using a mild soap, a special vehicle soap or general purpose dishwashing liquid mixed with clean, lukewarm (never hot) water.

7-2 Appearance and care

CAUTION ● Do not use car washes that use acid in the detergent. Some car washes, especially brushless ones, use some acid for cleaning. The acid may react with some plastic vehicle components, causing them to crack. This could affect their appearance, and also could cause them not to function properly. Always check with your car wash to confirm that acid is not used. ● Do not wash the vehicle with strong household soap, strong chemical detergents, gasoline or solvents. ● Do not wash the vehicle in direct sunlight or while the vehicle body is hot, as the surface may become water-spotted. ● Avoid using tight-napped or rough cloths, such as washing mitts. Care must be taken when removing caked-on dirt or other foreign substances so the paint surface is not scratched or damaged. ● Do not use an automatic car wash or high pressure car wash. Avoid applying water continuously to the parts around the roof and the windows. This may cause water to leak into the inside of your vehicle.

Rinse the vehicle thoroughly with plenty of clean water. Inside flanges, seams and folds on the doors, hatches and hood are particularly vulnerable to the effects of road salt. Therefore, these areas must be regularly cleaned. Make sure that the drain holes in the lower edge of the door are open. Spray water under the body and in the wheel wells to loosen the dirt and wash away road salt. Avoid leaving water spots on the paint surface by using a damp chamois to dry the vehicle.

WAXING Regular waxing protects the paint surface and helps retain new vehicle appearance. Polishing is recommended to remove built-up wax residue and to avoid a weathered appearance before reapplying wax. An INFINITI retailer can assist you in choosing the proper product. ● Wax your vehicle only after a thorough washing. Follow the instructions supplied with the wax. ● Do not use a wax containing any abrasives, cutting compounds or cleaners that may damage the vehicle finish.

Machine compound or aggressive polishing on a base coat/clear coat paint finish may dull the finish or leave swirl marks.

REMOVING SPOTS Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the paint surface to avoid lasting damage or staining. Special cleaning products are available at an INFINITI retailer or any automotive accessory stores.

UNDERBODY In areas where road salt is used in winter, the underbody must be cleaned regularly. This will prevent dirt and salt from building up and causing the acceleration of corrosion on the underbody and suspension. Before the winter period and again in the spring, the underseal must be checked and, if necessary, re-treated.

GLASS Use glass cleaner to remove smoke and dust film from the glass surfaces. It is normal for glass to become coated with a film after the vehicle is parked in the hot sun. Glass cleaner and a soft cloth will easily remove this film.

CAUTION When cleaning the inside of the windows, do not use sharp-edged tools, abrasive cleaners or chlorine-based disinfectant cleaners. They could damage the electrical conductors, radio antenna elements or rear window defroster elements.

ALUMINUM ALLOY WHEELS Wash regularly with a sponge dampened in a mild soap solution, especially during winter months in areas where road salt is used. Salt could discolor the wheels if not removed.

CAUTION Follow the directions below to avoid staining or discoloring the wheels: ● Do not use a cleaner that uses strong acid or alkali contents to clean the wheels. ● Do not apply wheel cleaners to the wheels when they are hot. The wheel temperature should be the same as ambient temperature. ● Rinse the wheel to completely remove the cleaner within 15 minutes after the cleaner is applied.

CHROME PARTS Clean chrome parts regularly with a non- abrasive chrome polish to maintain the finish.

TIRE DRESSING INFINITI does not recommend the use of tire dressings. Tire manufacturers apply a coating to the tires to help reduce discoloration of the rubber. If a tire dressing is applied to the tires, it may react with the coating and form a compound. This compound may come off the tire while driving and stain the vehicle paint. If you choose to use a tire dressing, take the following precautions: ● Use a water-based tire dressing. The coating on the tire dissolves more easily with an oil-based tire dressing. ● Apply a light coat of tire dressing to help prevent it from entering the tire tread/grooves (where it would be difficult to remove). ● Wipe off excess tire dressing using a dry towel. Make sure the tire dressing is completely removed from the tire tread/grooves. ● Allow the tire dressing to dry as recommended by tire dressing manufacturer.

Appearance and care 7-3

CLEANING INTERIOR Occasionally remove loose dust from the interior trim, plastic parts and seats using a vacuum cleaner or soft bristled brush. Wipe the vinyl and leather surfaces with a clean, soft cloth dampened in mild soap solution, then wipe clean with a dry soft cloth.

● Small dirt particles can be abrasive and damaging to the leather surfaces and should be removed promptly. Do not use saddle soap, car waxes, polishes, oils, cleaning fluids, solvents, detergents or ammonia-based cleaners as they may damage the leather’s natural finish.

Regular care and cleaning is required in order to maintain the appearance of the leather.

● Only use fabric protectors approved by INFINITI.

Before using any fabric protector, read the manufacturer’s recommendations. Some fabric protectors contain chemicals that may stain or bleach the seat material.

● Do not use glass or plastic cleaner on meter or gauge lens covers. It may damage the lens cover.

Use a cloth dampened only with water, to clean the meter and gauge lens.

AIR FRESHENERS

WARNING Do not use water or acidic cleaners (hot steam cleaners) on the seat. This can damage the seat or occupant classification sensor. This can also affect the operation of the air bag system and result in serious personal injury.

CAUTION ● Never use benzine, thinner, or any similar material.

Most air fresheners use a solvent that could affect the vehicle interior. If you use an air freshener, take the following precautions: ● Hanging-type air fresheners can cause permanent discoloration when they contact vehicle interior surfaces. Place the air freshener in a location that allows it to hang free and not contact an interior surface. ● Liquid-type air fresheners typically clip on the vents. These products can cause immediate damage and discoloration when spilled on interior surfaces. Carefully read and follow the manufacturer’s instructions before using air fresheners.

7-4 Appearance and care

FLOOR MATS WARNING To avoid potential pedal interference that may result in a collision or injury: ● NEVER place a floor mat on top of another floor mat in the driver front position. ● Use only genuine NISSAN floor mats specifically designed for use in your vehicle model. See your INFINITI retailer for more information. ● Properly position the mats in the floorwell using the floor mat positioning aid. See “Floor mat positioning aid” later in this section. The use of NISSAN floor mats can extend the life of your vehicle carpet and make it easier to clean the interior. Mats should be maintained with regular cleaning and replaced if they become excessively worn.

SEAT BELTS The seat belts can be cleaned by wiping them with a sponge dampened in a mild soap solution. Allow the belts to dry completely in the shade before using them. See “SEAT BELTS” in the “1. Safety — Seats, seat belts and supplemental restraint system” section.

WARNING SAI0050

Front (example)

Floor mat positioning aid This vehicle includes front floor mat brackets to act as floor mat positioning aid. NISSAN floor mats have been specially designed for your vehicle model. The front floor mats have grommet holes in them. To install, simply position the mat by placing the floor mat bracket hook through the floor mat grommet hole while centering the mat in the floorwell. Periodically check to make certain that the mats are properly positioned.

SAI0057

Bracket positions The illustration shows the location of the floor mat brackets.

Do not allow wet seat belts to roll up in the retractor. NEVER use bleach, dye, or chemical solvents to clean the seat belts, since these materials may severely weaken the seat belt webbing.

Appearance and care 7-5

CORROSION PROTECTION MOST COMMON FACTORS CONTRIBUTING TO VEHICLE CORROSION ● The accumulation of moisture-retaining dirt and debris in body panel sections, cavities, and other areas. ● Damage to paint and other protective coatings caused by gravel and stone chips or minor traffic accidents.

ENVIRONMENTAL FACTORS INFLUENCE THE RATE OF CORROSION Moisture Accumulation of sand, dirt and water on the vehicle body underside can accelerate corrosion. Wet floor coverings will not dry completely inside the vehicle, and should be removed for drying to avoid floor panel corrosion.

Relative humidity Corrosion will be accelerated in areas of high relative humidity, especially those areas where the temperatures stay above freezing where atmospheric pollution exists, or where road salt is used.

7-6 Appearance and care

Temperature A temperature increase will accelerate the rate of corrosion to those parts which are not well ventilated.

Air pollution Industrial pollution, the presence of salt in the air in coastal areas, or heavy road salt use will accelerate the corrosion process. Road salt will also accelerate the disintegration of paint surfaces.

TO PROTECT YOUR VEHICLE FROM CORROSION ● Wash and wax your vehicle often to keep the vehicle clean. ● Always check for minor damage to the paint and repair it as soon as possible. ● Keep drain holes at the bottom of the doors open to avoid water accumulation. ● Check the underbody for accumulation of sand, dirt or salt. If present, wash with water as soon as possible.

CAUTION ● NEVER remove dirt, sand or other debris from the passenger compartment by washing it out with a hose. Remove dirt with a vacuum cleaner. ● Never allow water or other liquids to come in contact with electronic components inside the vehicle as this may damage them. Chemicals used for road surface deicing are extremely corrosive. They accelerate corrosion and deterioration of underbody components such as the exhaust system, fuel and brake lines, brake cables, floor pan and fenders. In winter, the underbody must be cleaned periodically. For additional protection against rust and corrosion, which may be required in some areas, consult an INFINITI retailer.

8 Maintenance and do-it-yourself

Maintenance requirement . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 Scheduled maintenance . . . . . . . . . . . . . . . . . . . . . . . . 8-2 General maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 Where to go for service . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 General maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 Explanation of maintenance items . . . . . . . . . . . . . . . 8-2 Maintenance precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5 Engine compartment check locations. . . . . . . . . . . . . . . . 8-6 VQ37VHR engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6 Engine cooling system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7 Checking engine coolant level . . . . . . . . . . . . . . . . . . . 8-7 Changing engine coolant. . . . . . . . . . . . . . . . . . . . . . . . 8-8 Engine oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8 Checking engine oil level . . . . . . . . . . . . . . . . . . . . . . . 8-8 Changing engine oil and filter . . . . . . . . . . . . . . . . . . . 8-9 Automatic transmission fluid . . . . . . . . . . . . . . . . . . . . . . .8-11 Power steering fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-11 Brake and clutch fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12 Brake fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12 Clutch fluid (if so equipped). . . . . . . . . . . . . . . . . . . . 8-12 Window washer fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13 Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13 Jump starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-15

Variable voltage control system . . . . . . . . . . . . . . . . . . . 8-15 Drive belt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16 Spark plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16 Replacing spark plugs . . . . . . . . . . . . . . . . . . . . . . . . . 8-17 Air cleaner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-17 Windshield wiper blades . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18 Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18 Replacing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18 Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-19 Self-adjusting brakes . . . . . . . . . . . . . . . . . . . . . . . . . . 8-19 Brake pad wear warning . . . . . . . . . . . . . . . . . . . . . . . 8-19 Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-20 Engine compartment. . . . . . . . . . . . . . . . . . . . . . . . . . . 8-20 Passenger compartment . . . . . . . . . . . . . . . . . . . . . . . 8-21 Intelligent Key battery replacement . . . . . . . . . . . . . . . . 8-22 Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-24 Headlights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-25 Exterior and interior lights . . . . . . . . . . . . . . . . . . . . . 8-25 Wheels and tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-27 Tire pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-27 Tire labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-30 Types of tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-32 Tire chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-32 Changing wheels and tires . . . . . . . . . . . . . . . . . . . . . 8-33

MAINTENANCE REQUIREMENT Your new INFINITI has been designed to have minimum maintenance requirements with long service intervals to save you both time and money. However, some day-to-day and regular maintenance is essential to maintain your INFINITI’s fine mechanical condition, as well as its emission and engine performance. It is the owner’s responsibility to make sure that the scheduled maintenance, as well as general maintenance, is performed. As the vehicle owner, you are the only one who can ensure that your vehicle receives the proper maintenance care. You are a vital link in the maintenance chain.

SCHEDULED MAINTENANCE For your convenience, both required and optional scheduled maintenance items are described and listed in your “INFINITI Service and Maintenance Guide”. You must refer to that guide to ensure that necessary maintenance is performed on your INFINITI at regular intervals.

GENERAL MAINTENANCE General maintenance includes those items which should be checked during normal day-today operation. They are essential for proper

8-2 Maintenance and do-it-yourself

GENERAL MAINTENANCE vehicle operation. It is your responsibility to perform these procedures regularly as prescribed. Performing general maintenance checks requires minimal mechanical skill and only a few general automotive tools. These checks or inspections can be done by yourself, a qualified technician or, if you prefer, an INFINITI retailer.

During the normal day-to-day operation of the vehicle, general maintenance should be performed regularly as prescribed in this section. If you detect any unusual sounds, vibrations or smell, be sure to check for the cause or have an INFINITI retailer do it promptly. In addition, you should notify an INFINITI retailer if you think that repairs are required.

WHERE TO GO FOR SERVICE

When performing any checks or maintenance work, see “MAINTENANCE PRECAUTIONS” later in this section.

If maintenance service is required or your vehicle appears to malfunction, have the systems checked and serviced by an INFINITI retailer.

EXPLANATION OF MAINTENANCE ITEMS

INFINITI technicians are well-trained specialists and are kept up-to-date with the latest service information through technical bulletins, service tips, and in-retailership information systems. They are completely qualified to work on INFINITI vehicles before work begins.

Additional information on the following items with “*” is found later in this section.

You can be confident that an INFINITI retailer’s service department performs the best job to meet the maintenance requirements on your vehicle — in a reliable and economical way.

Outside the vehicle The maintenance items listed here should be performed from time to time, unless otherwise specified. Doors and engine hood: Check that all doors and the engine hood operate properly. Also ensure that all latches lock securely. Lubricate hinges, latches, latch pins, rollers and links if necessary. Make sure that the secondary latch keeps the hood from opening when the primary latch is released.

When driving in areas using road salt or other corrosive materials, check lubrication frequently. Lights*: Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely. Also check headlight aim.

Tire, wheel alignment and balance: If the vehicle should pull to either side while driving on a straight and level road, or if you detect uneven or abnormal tire wear, there may be a need for wheel alignment. If the steering wheel or seat vibrates at normal highway speeds, wheel balancing may be needed.

Road wheel nuts (lug nuts)*: When checking the tires, make sure no wheel nuts are missing, and check for any loose wheel nuts. Tighten if necessary.

For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Information” (Canada) in the INFINITI Warranty Information Booklet.

Tire rotation*: Tires cannot be rotated, as front tires are a different size from rear tires and the direction of wheel rotation is fixed in each tire.

Windshield: Clean the windshield on a regular basis. Check the windshield at least every six months for cracks or other damage. Have a damaged windshield repaired by a qualified repair facility.

Tires*: Check the pressure with a gauge often and always prior to long distance trips. If necessary, adjust the pressure in all tires, including the spare, to the pressure specified. Check carefully for damage, cuts or excessive wear. Tire Pressure Monitoring System (TPMS) transmitter components: Replace the TPMS transmitter grommet seal, valve core and cap when the tires are replaced due to wear or age.

Windshield wiper blades*: Check for cracks or wear if they do not wipe properly.

Inside the vehicle The maintenance items listed here should be checked on a regular basis, such as when performing scheduled maintenance, cleaning the vehicle, etc.

Accelerator pedal: Check the pedal for smooth operation and make sure the pedal does not catch or require uneven effort. Keep the floor mat away from the pedal. Automatic transmission P (Park) mechanism: On a fairly steep hill, check that the vehicle is held securely with the selector lever in the P (Park) position without applying any brakes. Brake pedal: Check the pedal for smooth operation. If the brake pedal suddenly goes down further than normal, the pedal feels spongy or the vehicle seems to take longer to stop, see an INFINITI retailer immediately. Keep the floor mat away from the pedal. Brakes: Check that the brakes do not pull the vehicle to one side when applied. Parking brake: Check the parking brake operation regularly. The vehicle should be securely held on a fairly steep hill with only the parking brake applied. If the parking brake needs adjusted, see an INFINITI retailer. Seat belts: Check that all parts of the seat belt system (for example, buckles, anchors, adjusters and retractors) operate properly and smoothly, and are installed securely. Check the belt webbing for cuts, fraying, wear or damage.

Maintenance and do-it-yourself 8-3

Seats: Check seat position controls such as seat adjusters, seatback recliners, etc. to ensure they operate smoothly and that all latches lock securely in every position. Check that the head restraints move up and down smoothly and that the locks (if so equipped) hold securely in all latched positions. Steering wheel: Check for changes in the steering conditions, such as excessive free play, hard steering or strange noises. Warning lights and chimes: Make sure that all warning lights and chimes are operating properly. Windshield defroster: Check that the air comes out of the defroster outlets properly and in sufficient quantity when operating the heater or air conditioner. Windshield wiper and washer*: Check that the wipers and washers operate properly and that the wipers do not streak.

Under the hood and vehicle The maintenance items listed here should be checked periodically (for example, each time you check the engine oil or refuel). Battery*: Check the fluid level in each cell. It should be between the MAX and MIN lines.

8-4 Maintenance and do-it-yourself

Vehicles operated in high temperatures or under severe condition require frequent checks of the battery fluid level.

should notice any leaks or if gasoline fumes are evident, check for the cause and have it corrected immediately.

Brake and clutch fluid levels*: Make sure that the brake and clutch fluid levels are between the MAX and MIN lines on the reservoir.

Power steering fluid level* and lines: Check the level with the engine off. Check the lines for proper attachment, leaks, cracks, etc.

Engine coolant level*: Check the coolant level when the engine is cold.

Radiator and hoses: Check the front of the radiator and clean off any dirt, insects, leaves, etc., that may have accumulated. Make sure the hoses have no cracks, deformation, rot or loose connections.

Engine drive belt*: Make sure that the drive belt is not frayed, worn, cracked or oily. Engine oil level*: Check the level after parking the vehicle on a level surface and turning off the engine. Wait more than 15 minutes for the oil to drain back into the oil pan. Exhaust system: Make sure there are no loose supports, cracks or holes. If the sound of the exhaust seems unusual or there is a smell of exhaust fumes, immediately have the exhaust system inspected by an INFINITI retailer. (See “PRECAUTIONS WHEN STARTING AND DRIVING” in the “5. Starting and driving” section for exhaust gas (Carbon monoxide).) Fluid leaks: Check under the vehicle for fuel, oil, water or other fluid leaks after the vehicle has been parked for a while. Water dripping from the air conditioner after use is normal. If you

Underbody: The underbody is frequently exposed to corrosive substances such as those used on icy roads or to control dust. It is very important to remove these substances, otherwise rust will form on the floor pan, frame, fuel lines and around the exhaust system. At the end of winter, the underbody should be thoroughly flushed with plain water, being careful to clean those areas where mud and dirt may accumulate. For additional information, see “CLEANING EXTERIOR” in the “7. Appearance and care” section. Windshield washer fluid*: Check that there is adequate fluid in the reservoir.

MAINTENANCE PRECAUTIONS When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle. The following are general precautions which should be closely observed.

WARNING ● Park the vehicle on a level surface, apply the parking brake securely and block the wheels to prevent the vehicle from moving. For manual transmission models, move the shift lever to N (Neutral). For automatic transmission models, move the selector lever to P (Park). ● Be sure the ignition switch is in the OFF or LOCK position when performing any parts replacement or repairs. ● Never connect or disconnect the battery or any transistorized component while the ignition switch is in the ON position.

● It is advisable to secure or remove any loose clothing and remove any jewelry, such as rings, watches, etc. before working on your vehicle. ● Always wear eye protection whenever you work on your vehicle. ● If you must run the engine in an enclosed space such as a garage, be sure there is proper ventilation for exhaust gases to escape.

CAUTION ● Do not work under the hood while the engine is hot. Turn the engine off and wait until it cools down. ● Avoid direct contact with used engine oil and coolant. Improperly disposed engine oil, coolant, and/or other vehicle fluids can damage the environment. Always conform to local regulations for disposal of vehicle fluid.

● Never get under the vehicle while it is supported only by a jack. If it is necessary to work under the vehicle, support it with safety stands.

This “8. Maintenance and do-it-yourself” section gives instructions regarding only those items which are relatively easy for an owner to perform.

● Keep smoking materials, flame and sparks away from fuel tank and the battery.

A genuine INFINITI Service Manual is also available. (See “OWNER’S MANUAL/SERVICE MANUAL ORDER INFORMATION” in the “9. Technical and consumer information” section.)

● Never leave the engine or automatic transmission related component harnesses disconnected while the ignition switch is in the ON position.

● Your vehicle is equipped with an automatic engine cooling fan. It may come on at any time without warning, even if the ignition key is in the OFF position and the engine is not running. To avoid injury, always disconnect the negative battery cable before working near the fan.

● If you must work with the engine running, keep your hands, clothing, hair and tools away from moving fans, belts and any other moving parts.

● The fuel filter or fuel lines should be serviced by an INFINITI retailer because the fuel lines are under high pressure even when the engine is off.

You should be aware that incomplete or improper servicing may result in operating difficulties or excessive emissions, and could affect your warranty coverage. If in doubt about any servicing, we recommend that it be done by an INFINITI retailer.

Maintenance and do-it-yourself 8-5

ENGINE COMPARTMENT CHECK LOCATIONS 9. Radiator filler cap 10. Drive belt location 11. Engine coolant reservoir 12. Engine oil dipstick

SSI0345

1. Fuse/fusible link holder

5. Clutch fluid reservoir (Manual Transmission models)

2. Battery

6. Window washer fluid reservoir

3. Engine oil filler cap

7. Power steering fluid reservoir

4. Brake fluid reservoir

8. Air cleaner

VQ37VHR ENGINE

8-6 Maintenance and do-it-yourself

ENGINE COOLING SYSTEM The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide year-round anti-freeze and coolant protection. The antifreeze solution contains rust and corrosion inhibitors. Additional engine cooling system additives are not necessary.

WARNING ● Never remove the radiator or coolant reservoir cap when the engine is hot. Wait until the engine and radiator cool down. Serious burns could be caused by high pressure fluid escaping from the radiator. See precautions in “IF YOUR VEHICLE OVERHEATS” in the “6. In case of emergency” section of this manual. ● The radiator is equipped with a pressure type radiator cap. To prevent engine damage, use only a genuine NISSAN radiator cap.

CAUTION ● When adding or replacing coolant, be sure to use only Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent. Genuine NISSAN Long Life Antifreeze/Coolant (blue) is pre-diluted to provide antifreeze protection to ⫺34°F (⫺37°C). If additional freeze protection is needed due to weather where you operate your vehicle, add Genuine NISSAN Long Life Antifreeze/Coolant (blue) concentrate following the directions on the container. If an equivalent coolant other than Genuine NISSAN Long Life Antifreeze/Coolant (blue) is used, follow the coolant manufacturer’s instructions to maintain minimum antifreeze protection to ⫺34°F (⫺37°C). The use of other types of coolant solutions other than Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent may damage the engine cooling system. ● The life expectancy of the factory-fill coolant is 105,000 miles (168,000 km) or 7 years. Mixing any other type of coolant other than Genuine NISSAN Long Life Antifreeze/Coolant (blue), including Genuine NISSAN Long Life Antifreeze/Coolant (green), or the use of nondistilled water will reduce the life expectancy of the factory-fill coolant. Refer to the INFINITI Service and Maintenance Guide for more details.

SDI2043

CHECKING ENGINE COOLANT LEVEL Check the coolant level in the reservoir tank when the engine is cold. If the coolant level is 2 , open the reservoir tank below the MIN level 䊊 1 . If cap and add coolant up to the MAX level 䊊 the reservoir tank is empty, check the coolant level in the radiator when the engine is cold. If there is insufficient coolant in the radiator, fill the radiator with coolant up to the filler opening and also add it to the reservoir tank up to the 1 . MAX level 䊊 Tighten the cap securely after adding engine coolant. If the cooling system frequently requires coolant, have it checked by an INFINITI retailer.

Maintenance and do-it-yourself 8-7

ENGINE OIL CHANGING ENGINE COOLANT Major cooling system repairs should be performed by an INFINITI retailer. The service procedures can be found in the appropriate INFINITI Service Manual.

Engine coolant must be disposed of properly. Check your local regulations.

Improper servicing can result in reduced heater performance and engine overheating.

WARNING ● To avoid the danger of being scalded, never change the coolant when the engine is hot. ● Never remove the radiator cap when the engine is hot. Serious burns could be caused by high pressure fluid escaping from the radiator. ● Avoid direct skin contact with used coolant. If skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible. ● Keep coolant out of the reach of children and pets.

8-8 Maintenance and do-it-yourself

SDI2045

CHECKING ENGINE OIL LEVEL 1. Park the vehicle on a level surface and apply the parking brake. 2. Run the engine until it reaches operating temperature. 3. Turn off the engine. Wait more than 15 minutes for the oil to drain back into the oil pan. 4. Remove the dipstick and wipe it clean. Reinsert it all the way. 5. Remove the dipstick again and check the 1 . oil level. It should be within the range 䊊 2 , remove the oil If the oil level is below 䊊 filler cap and pour recommended oil 3 . through the opening. Do not overfill 䊊

6. Recheck oil level with the dipstick. It is normal to add some oil between oil maintenance intervals or during the break-in period, depending on the severity of operating conditions.

CAUTION Oil level should be checked regularly. Operating the engine with an insufficient amount of oil can damage the engine, and such damage is not covered by the warranty.

4. Raise and support the vehicle using a suitable floor jack and safety jack stands. ● Place the safety jack stands under the vehicle jack-up points. ● A suitable adapter should be attached to the jack stand saddle. 5. Remove the plastic engine undercover. a. Remove the small plastic clips at the center of the undercover. b. Then remove the bolts that hold the undercover in place.

CHANGING ENGINE OIL AND FILTER Vehicle set-up 1. Park the vehicle on a level surface and apply the parking brake. 2. Run the engine until it reaches operating temperature. 3. Turn the engine off and wait more than 15 minutes.

CAUTION Make sure the correct lifting and support points are used to avoid vehicle damage.

SDI2335

Engine oil and filter 1. Place a large drain pan under the drain plug. 2. Remove the oil filler cap. 1 with a wrench 3. Remove the drain plug 䊊 and completely drain the oil.

CAUTION Be careful not to burn yourself, as the engine oil is hot. ● Waste oil must be disposed of properly.

Maintenance and do-it-yourself 8-9

● Check your local regulations. (Perform steps 4 to 7 only when the engine oil filter change is needed.) 2 with an oil filter 4. Loosen the oil filter 䊊 wrench. Remove the oil filter by turning it by hand. 5. Wipe the engine oil filter mounting surface with a clean rag.

CAUTION Be sure to remove any old rubber gasket remaining on the mounting surface of the engine. Failure to do so could lead to engine damage. 6. Coat the gasket on the new filter with clean engine oil. 7. Screw in the oil filter clockwise until a slight resistance is felt, then tighten additionally more than 2/3 turn. Oil filter tightening torque: 11 to 15 ft-lb (14.7 to 20.5 N·m)

8-10 Maintenance and do-it-yourself

8. Clean and re-install the drain plug with a new washer. Securely tighten the drain plug with a wrench. Drain plug tightening torque: 22 to 29 ft-lb (29 to 39 N·m) Do not use excessive force. 9. Refill the engine with the recommended oil through the oil filler opening, and install the oil filler cap securely. See “CAPACITIES AND RECOMMENDED FUEL/LUBRICANTS” in the “9. Technical and consumer information” section for drain and refill capacity. The drain and refill capacity depends on the oil temperature and drain time. Use these specifications for reference only. Always use the dipstick to determine the proper amount of oil in the engine. 10. Start the engine and check for leakage around the drain plug and the oil filter. Correct as required. 11. Turn the engine off and wait more than 15 minutes. Check the oil level with the dipstick. Add engine oil if necessary.

After the operation 1. Install the engine undercover into position as the following steps. a. Pull the center of the small plastic clips out. b. Hold the engine undercover into position. c. Insert the clips through the undercover into the holes in the frame, then push the center of the clips in to lock the clips in place. d. Install the bolts that hold the undercover in place. Be careful not to strip the bolts or over-tighten them. 2. Lower the vehicle carefully to the ground. 3. Dispose of waste oil and filter properly.

WARNING ● Prolonged and repeated contact with used engine oil may cause skin cancer. ● Try to avoid direct skin contact with used oil. If skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible. ● Keep used engine oil out of the reach of children.

AUTOMATIC TRANSMISSION FLUID

POWER STEERING FLUID

When checking or replacement is required, we recommend an INFINITI retailer for servicing.

CAUTION ● Do not overfill.

CAUTION

● Use Genuine NISSAN PSF or equivalent.

● Use only Genuine NISSAN Matic S ATF. Do not mix with other fluids. ● Using automatic transmission fluid other than Genuine NISSAN Matic S ATF will cause deterioration in driveability and automatic transmission durability, and may damage the automatic transmission, which is not covered by the INFINITI new vehicle limited warranty.

SDI1765A

Check the fluid level in the reservoir. The fluid level should be checked with the 1 : HOT MAX., engine off using the HOT range (䊊 2 : HOT MIN.) at fluid temperatures of 122 to 䊊 3 : 176°F (50 to 80°C) or using the COLD range (䊊 4 : COLD MIN.) at fluid temperaCOLD MAX., 䊊 tures of 32 to 86°F (0 to 30°C). If the fluid is below the MIN line, add Genuine NISSAN PSF or equivalent. Remove the cap and fill through the opening.

Maintenance and do-it-yourself 8-11

BRAKE AND CLUTCH FLUID For further brake and clutch fluid information, see “CAPACITIES AND RECOMMENDED FUEL/LUBRICANTS” in the “9. Technical and consumer information” section of this manual.

WARNING ● Use only new fluid from a sealed container. Old, inferior or contaminated fluid may damage the brake system. The use of improper fluids can damage the brake system and affect the vehicle’s stopping ability. ● Be sure to clean the filler cap before removing. ● Brake fluid is poisonous and should be stored carefully in marked containers out of the reach of children.

CAUTION Do not spill the fluid on painted surfaces. This will damage the paint. If fluid is spilled, wash the surface with water.

8-12 Maintenance and do-it-yourself

SDI2025

SDI1906

BRAKE FLUID

CLUTCH FLUID (if so equipped)

Check the fluid level in the reservoir. If the fluid 2 or the brake warning is below the MIN line 䊊 light comes on, add Genuine NISSAN Super Heavy Duty Brake Fluid or equivalent DOT 3 fluid 1 . If fluid must be added up to the MAX line 䊊 frequently, the system should be checked by an INFINITI retailer.

Check the fluid level in the reservoir. If the fluid 2 , add Genuine NISSAN is below the MIN line 䊊 Super Heavy Duty Brake Fluid or equivalent DOT 1 . If fluid must be 3 fluid up to the MAX line 䊊 added frequently, the system should be checked by an INFINITI retailer.

WINDOW WASHER FLUID

BATTERY Recommended fluid is Genuine NISSAN Windshield Washer Concentrate Cleaner & Antifreeze or equivalent.

CAUTION ● Do not substitute engine anti-freeze coolant for window washer solution. This may result in damage to the paint.

SDI2027

Fill the window washer fluid reservoir periodically. Add window washer fluid when the low window washer fluid warning light comes on. To fill the window washer fluid reservoir, lift the cap and pour the window washer fluid into the reservoir opening. Add a washer solvent to the washer for better cleaning. In the winter season, add a windshield washer antifreeze. Follow the manufacturer’s instructions for the mixture ratio. Refill the reservoir more frequently when driving conditions require an increased amount of window washer fluid.

● Do not fill the window washer reservoir tank with washer fluid concentrates at full strength. Some methyl alcohol based washer fluid concentrates may permanently stain the grille if spilled while filling the window washer reservoir tank. ● Pre-mix washer fluid concentrates with water to the manufacturer’s recommended levels before pouring the fluid into the window washer reservoir tank. Do not use the window washer reservoir tank to mix the washer fluid concentrate and water.

● Keep the battery surface clean and dry. Clean the battery with a solution of baking soda and water. ● Make certain the terminal connections are clean and securely tightened. ● If the vehicle is not to be used for 30 days or longer, disconnect the negative (⫺) battery terminal cable to prevent discharging it.

CAUTION When the battery cable is removed from the battery terminal, do not close either of front doors. The automatic window adjusting function will not work, and the side roof panel may be damaged. To disconnect the negative (⫺) battery terminal, perform the procedure in the following order. Otherwise, the window and the side roof panel may contact and be damaged. 1. Close the windows. 2. Open the hood. 3. Close and lock all the doors. 4. Disconnect the negative (⫺) battery terminal.

Maintenance and do-it-yourself 8-13

5. Securely close the hood. To connect the negative (⫺) battery terminal, perform the procedure in the following order. Otherwise, the window and the side roof panel may contact and be damaged. 1. Unlock and open the driver side door. Do not close the door. 2. Open the hood. 3. Connect the negative (⫺) battery terminal. Then close the hood. 4. Fully open the driver side door window. 5. Close the driver side door and the window.

WARNING ● Do not expose the battery to flames or electrical sparks. Hydrogen gas generated by the battery is explosive. Do not allow battery fluid to contact your skin, eyes, fabrics, or painted surfaces. After touching a battery or battery cap, do not touch or rub your eyes. Thoroughly wash your hands. If the acid contacts your eyes, skin or clothing, immediately flush with water for at least 15 minutes and seek medical attention.

8-14 Maintenance and do-it-yourself

● Do not operate the vehicle if the fluid in the battery is low. Low battery fluid can cause a higher load on the battery which can generate heat, reduce battery life, and in some cases lead to an explosion. ● When working on or near a battery, always wear suitable eye protection and remove all jewelry. ● Battery posts, terminals and related accessories contain lead and lead compounds. Wash hands after handling. ● Keep the battery out of the reach of children.

DI0137MA

Check the fluid level in each cell (Remove the battery cover if it is necessary). It should be 1 and LOWER LEVEL between the UPPER LEVEL 䊊 2 lines. 䊊 If it is necessary to add fluid, add only distilled water to bring the level to the indicator in each filler opening. Do not overfill.

VARIABLE VOLTAGE CONTROL SYSTEM JUMP STARTING If jump starting is necessary, see “JUMP STARTING” in the “6. In case of emergency” section. If the engine does not start by jump starting, the battery may have to be replaced. Contact an INFINITI retailer.

SDI1480C A . 1. Remove the cell plugs 䊊 2. Add distilled water up to the UPPER LEVEL 1 line. 䊊

CAUTION ● Do not ground accessories directly to the battery terminal. Doing so will bypass the variable voltage control system and the vehicle battery may not charge completely. ● Use electrical accessories with the engine running to avoid discharging the vehicle battery. The variable voltage control system measures the amount of electrical discharge from the battery and controls voltage generated by the generator.

If the side of the battery is not clear, check the distilled water level by looking directly 1 indicates above the cell; the condition 䊊 2 needs more to be OK and the condition 䊊 added. A . 3. Tighten cell plugs 䊊 Vehicles operated in high temperatures or under severe conditions require frequent checks of the battery fluid level.

Maintenance and do-it-yourself 8-15

DRIVE BELT

SPARK PLUGS 1. Visually inspect the belt for signs of unusual wear, cuts, fraying or looseness. If the belt is in poor condition or loose, have it replaced or adjusted by an INFINITI retailer. 2. Have the belt condition checked regularly.

WARNING Be sure the engine and the ignition switch are off and that the parking brake is engaged securely.

CAUTION Be sure to use the correct socket to remove the spark plugs. An incorrect socket can damage the spark plugs. SDI2119

VQ37VHR engine 1. Power steering fluid pump 2. Alternator 3. Crankshaft pulley 4. Air conditioner compressor 5. Drive belt auto-tensioner

WARNING Be sure the ignition switch is in the OFF or LOCK position before servicing the drive belt. The engine could rotate unexpectedly.

8-16 Maintenance and do-it-yourself

AIR CLEANER When replacing the filter, wipe the inside of the air cleaner housing and the cover with a damp cloth.

WARNING ● Operating the engine with the air cleaner removed can cause you or others to be burned. The air cleaner not only cleans the air, it stops flame if the engine backfires. If it is not there, and the engine backfires, you could be burned. Do not drive with the air cleaner removed, and be careful when working on the engine with the air cleaner removed.

SDI2020

REPLACING SPARK PLUGS

● Never pour fuel into the throttle body or attempt to start the engine with the air cleaner removed. Doing so could result in serious injury.

If replacement is required, see an INFINITI retailer for servicing.

Iridium-tipped spark plugs It is not necessary to replace the iridium-tipped spark plugs as frequently as the conventional type spark plugs since they will last much longer. Follow the maintenance schedule in “INFINITI Service and Maintenance Guide”, but do not reuse them by cleaning or regapping. Always replace spark plugs with recommended or equivalent ones.

SDI2363 1 as illustrated and pull Remove the retainers 䊊 2 . out the filter element 䊊

The filter element should not be cleaned and reused. Replace it according to the maintenance intervals. See “INFINITI Service and Maintenance Guide” for maintenance intervals.

Maintenance and do-it-yourself 8-17

WINDSHIELD WIPER BLADES CLEANING If your windshield is not clear after using the windshield washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield. Clean the outside of the windshield with a washer solution or a mild detergent. Your windshield is clean if beads do not form when rinsing with clear water. Clean each blade by wiping it with a cloth soaked in a washer solution or a mild detergent. Then rinse the blade with clear water. If your windshield is still not clear after cleaning the blades and using the wiper, replace the blades.

CAUTION Worn windshield wiper blades can damage the windshield and impair driver vision.

SDI2048

REPLACING Replace the wiper blades if they are worn. 1. Lift the wiper arm away from the windshield. A , and then move 2. Push the release tab 䊊 1 the wiper blade down the wiper arm 䊊 while pushing the release tab to remove.

3. Insert the new wiper blade onto the wiper arm until a click sounds. 4. Rotate the wiper blade so the dimple is in the groove.

8-18 Maintenance and do-it-yourself

CAUTION ● After wiper blade replacement, return the wiper arm to its original position; otherwise it may be damaged when the hood is opened. ● Make sure the wiper blades contact the glass; otherwise the arm may be damaged from wind pressure.

BRAKES If the brakes do not operate properly, have the brakes checked by an INFINITI retailer.

SELF-ADJUSTING BRAKES Your vehicle is equipped with self-adjusting brakes. The disc-type brakes self-adjust every time the brake pedal is applied.

WARNING

Under some driving or climate conditions, occasional brake squeak, squeal or other noise may be heard. Occasional brake noise during light to moderate stops is normal and does not affect the function or performance of the brake system. Proper brake inspection intervals should be followed. For additional information, see the maintenance log section of your “INFINITI Service and Maintenance Guide”.

See an INFINITI retailer for a brake system check if the brake pedal height does not return to normal.

BRAKE PAD WEAR WARNING

SDI2362 A . Be careful not to clog the washer nozzle 䊊 This may cause improper windshield washer operation. If the nozzle is clogged, remove any B . Be objects with a needle or small pin 䊊 careful not to damage the nozzle.

The disc brake pads have audible wear warnings. When a brake pad requires replacement, it will make a high pitched scraping sound when the vehicle is in motion. This scraping sound will first occur only when the brake pedal is depressed. After more wear of the brake pad, the sound will always be heard even if the brake pedal is not depressed. Have the brakes checked as soon as possible if the wear warning sound is heard.

Maintenance and do-it-yourself 8-19

FUSES

SDI1479A

ENGINE COMPARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or cause a fire.

If any electrical equipment does not operate, check for an open fuse. 1. Be sure the ignition switch is pushed to the OFF or LOCK position and the headlight switch is turned to OFF. 2. Open the engine hood and remove the cover on the battery and the fuse/fusible link holder. 3. Remove the fuse/fusible link holder cover. 4. Remove the fuse with the fuse puller located in the passenger compartment fuse box.

SDI1754

5. If the fuse is open 䊊, replace it with a B . Spare fuses are stored in the new fuse 䊊 passenger compartment fuse box. 6. If a new fuse also opens, have the electrical system checked and repaired by an INFINITI retailer. A

Fusible links If any electrical equipment does not operate and the fuses are in good condition, check the fusible links. If any of these fusible links are melted, replace only with genuine INFINITI parts.

8-20 Maintenance and do-it-yourself

SDI2034

PASSENGER COMPARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not operate, check for an open fuse. 1. Be sure the ignition switch is pushed to the OFF or LOCK position and the headlight switch is turned to OFF.

2. Open the fuse box lid. A . 3. Remove the fuse with the fuse puller 䊊 4. If the fuse is open, replace it with a new fuse. Spare fuses are stored in the fuse box. 5. If a new fuse also opens, have the electrical system checked and repaired by an INFINITI retailer.

SDI2704

Extended storage switch (if so equipped) If any electrical equipment does not operate, remove the extended storage switch and check for an open fuse. NOTE: The extended storage switch is used for long term vehicle storage. Even if the extended storage switch is broken it is not necessary to replace it. Replace only the open fuse in the switch with a new fuse.

Maintenance and do-it-yourself 8-21

INTELLIGENT KEY BATTERY REPLACEMENT How to remove the extended storage switch: 1. To remove the extended storage switch, be sure the ignition switch is in the OFF or LOCK position. 2. Be sure the headlight switch is in the OFF position. 3. Remove the fuse box cover. 1 found on each 4. Pinch the locking tabs 䊊 side of the storage switch. 5. Pull the storage switch straight out from 2 . the fuse box 䊊

2. Insert a flat-blade screwdriver wrapped with a cloth into the slit of the corner and twist it to separate the upper part from the lower part. 3. Replace the battery with a new one. Recommended battery: CR2032 or equivalent. ● Do not touch the internal circuit and electric terminals as it could cause a malfunction. ● Hold the battery by the edges. Holding the battery across the contact points will seriously deplete the storage capacity. ● Make sure that the + side faces the bottom of the case.

SDI2451

Replace the battery as follows: 1. Release the lock knob at the back of the Intelligent Key and remove the mechanical key.

8-22 Maintenance and do-it-yourself

installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna SDI2452

– Increase the separation between the equipment and the receiver

4. Align the tips of the upper and lower parts 1 , and then push them together until it 䊊 2 . is securely closed 䊊

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

5. Push the buttons two or three times to check its operation.

– Consult the retailer or an experienced radio/TV technician for help.

See an INFINITI retailer if you need any assistance for replacement. FCC Notice: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

Maintenance and do-it-yourself 8-23

LIGHTS

1. Park light 2. Headlight (high- and low-beam) 3. Front turn signal light 4. Map light 5. Fog light 6. Front side marker light 7. Step light 8. High-mounted stop light 9. Trunk light 10. License plate light 11. Back-up light 12. Rear combination light (rear turn signal/ tail/stop/side marker light)

SDI2689

8-24 Maintenance and do-it-yourself

HEADLIGHTS

EXTERIOR AND INTERIOR LIGHTS

Fog may temporarily form inside the lens of the exterior lights in the rain or in a car wash. A temperature difference between the inside and the outside of the lens causes the fog. This is not a malfunction. If large drops of water collect inside the lens, contact an INFINITI retailer.

Replacing WARNING

Item

Wattage (W)

Bulb No.

Headlight* 35

D2S

Front turn signal light*

High/Low beams (xenon)

21

WY21W

Front fog light*

55

H11

Park light*

5

W5W

Front side marker light*

5

W5W

16

W16W

21

W21W

Rear combination light*

HIGH VOLTAGE When xenon headlights are on, they produce a high voltage. To prevent an electric shock, never attempt to modify or disassemble. Always have your xenon headlights replaced at an INFINITI retailer. For additional information, see “HEADLIGHT AND TURN SIGNAL SWITCH” in the “2. Instruments and controls” section. Use the same number and wattage shown in the following chart as originally installed. If replacement is required, see an INFINITI retailer.

back-up turn signal stop/tail/side marker

LED

—

License plate light*

5

W5W

Map light

8

—

Vanity mirror light

2

—

Step light*

8

—

Trunk light*

5

—

LED

—

High-mounted stop light* *: See an INFINITI retailer for replacement.

NOTE: Always check with the Parts Department at an INFINITI retailer for the latest information about parts.

Maintenance and do-it-yourself 8-25

Replacement procedures All other lights are either type A, B, C, D, E or F. When replacing a bulb, first remove the lens and/or cover.

SDI2434

Map light

SDI2032 SDI1679

8-26 Maintenance and do-it-yourself

Vanity mirror light

WHEELS AND TIRES If you have a flat tire, see “FLAT TIRE” in the “6. In case of emergency” section.

TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS). It monitors tire pressure of all tires except the spare. When the low tire pressure warning light is lit and the CHECK TIRE PRESSURE warning appears on the dot matrix liquid crystal display, one or more of your tires is significantly under-inflated. The TPMS will activate only when the vehicle is driven at speeds above 16 MPH (25 km/h). Also, this system may not detect a sudden drop in tire pressure (for example a flat tire while driving). For more details, see “Low tire pressure warning light” in the “2. Instruments and controls” section, “TIRE PRESSURE MONITORING SYSTEM (TPMS)” in the “5. Starting and driving” section and “TIRE PRESSURE MONITORING SYSTEM (TPMS)” in the “6. In case of emergency” section.

Tire inflation pressure Check the pressure of the tires (including the spare) often and always prior to long distance trips. The recommended tire pressure specifications are shown

on the Tire and Loading Information label under the “Cold Tire Pressure” heading. The Tire and Loading Information label is affixed to the driver side center pillar. Tire pressures should be checked regularly because: ● Most tires naturally lose air over time. ● Tires can lose air suddenly when driven

over potholes or other objects or if the vehicle strikes a curb while parking. The tire pressures should be checked when the tires are cold. The tires are considered COLD after the vehicle has been parked for 3 or more hours, or driven less than 1 mile (1.6 km) at moderate speeds. Incorrect tire pressure, including under inflation, may adversely affect tire life and vehicle handling. WARNING ● Improperly inflated tires can fail sud-

● The

Gross Vehicle Weight rating (GVWR) is located on the F.M.V.S.S./ C.M.V.S.S. label. The vehicle weight capacity is indicated on the Tire and Loading Information label. Do not load your vehicle beyond this capacity. Overloading your vehicle may result in reduced tire life, unsafe operating conditions due to premature tire failure, or unfavorable handling characteristics and could also lead to a serious accident. Loading beyond the specified capacity may also result in failure of other vehicle components. ● Before taking a long trip, or whenever you heavily load your vehicle, use a tire pressure gauge to ensure that the tire pressures are at the specified level. ● For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Information” (Canada) in the Warranty Information Booklet.

denly and cause an accident. Maintenance and do-it-yourself 8-27

3 䊊

Original size: The size of the tires originally installed on the vehicle at the factory.

4 Cold tire pressure: Inflate the tires to 䊊

this pressure when the tires are cold. Tires are considered COLD after the vehicle has been parked for 3 or more hours, or driven less than 1 mile (1.6 km) at moderate speeds. The recommended cold tire inflation is set by the manufacturer to provide the best balance of tire wear, vehicle handling, driveability, tire noise, etc., up to the vehicle’s GVWR.

5 Tire size — see “TIRE LABELING” later 䊊

in this section.

6 Spare tire size or compact spare tire 䊊 SDI2720

Tire and Loading Information label 1 Seating capacity: The maximum num䊊

ber of occupants that can be seated in the vehicle.

8-28 Maintenance and do-it-yourself

2 䊊

Vehicle load limit: See “VEHICLE LOADING INFORMATION” in the “9. Technical and consumer information” section.

size (if so equipped)

3. Remove the gauge.

SIZE

4. Read the tire pressure on the gauge

SDI1949

Checking the tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem sideways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage.

stem and compare it to the specification shown on the Tire and Loading Information label. 5. Add air to the tire as needed. If too much air is added, press the core of the valve stem briefly with the tip of the gauge stem to release pressure. Recheck the pressure and add or release air as needed. 6. Install the valve stem cap. 7. Check the pressure of all other tires, including the spare.

COLD TIRE INFLATION PRESSURE

FRONT ORIGINAL TIRE

225/45R19 96W XL

270 kPa, 39 PSI

P225/ 50R18 94V

260 kPa, 38 PSI

REAR ORIGINAL TIRE

245/40R19 98W XL

270 kPa, 39 PSI

P245/ 45R18 96V

260 kPa, 38 PSI

T145/ 70R18 107M

420 kPa, 60 PSI

SPARE TIRE

Maintenance and do-it-yourself 8-29

4. R: The “R” stands for radial. 5. Two-digit number (16): This number is

the wheel or rim diameter in inches. 6. Two- or three-digit number (94): This

SDI1575

Example

SDI1606

Example

TIRE LABELING

1 Tire size (example: P215/60R16 94H) 䊊

Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can be used to identify the tire in case of a recall.

1. P: The “P” indicates the tire is de-

8-30 Maintenance and do-it-yourself

signed for passenger vehicles. (Not all tires have this information.) 2. Three-digit number (215): This number gives the width in millimeters of the tire from sidewall edge to sidewall edge. 3. Two-digit number (60): This number, known as the aspect ratio, gives the tire’s ratio of height to width.

number is the tire’s load index. It is a measurement of how much weight each tire can support. You may not find this information on all tires because it is not required by law. 7. H: Tire speed rating. You should not drive the vehicle faster than the tire speed rating.

5. Three-digit code: Date of Manufacture 6. Four numbers represent the week and

year the tire was built. For example, the numbers 3103 means the 31st week of 2003. If these numbers are missing, then look on the other sidewall of the tire.

䊊

3 Tire ply composition and material

SDI1607

Example 2 TIN (Tire Identification Number) for a 䊊

1.

2. 3. 4.

new tire (example: DOT XX XX XXX XXXX) DOT: Abbreviation for the “Department of Transportation”. The symbol can be placed above, below or to the left or right of the Tire Identification Number. Two-digit code: Manufacturer’s identification mark Two-digit code: Tire size Three-digit code: Tire type code (Optional)

The number of layers or plies of rubber-coated fabric in the tire. Tire manufacturers also must indicate the materials in the tire, which include steel, nylon, polyester, and others.

4 Maximum permissible inflation pres䊊

sure This number is the greatest amount of air pressure that should be put in the tire. Do not exceed the maximum permissible inflation pressure.

5 Maximum load rating 䊊

This number indicates the maximum load in kilograms and pounds that can be carried by the tire. When replacing the tires on the vehicle, always use a

tire that has the same load rating as the factory installed tire. 6 Term of “tubeless” or “tube type” 䊊

Indicates whether the tire requires an inner tube (“tube type”) or not (“tubeless”).

7 The word “radial” 䊊

The word “radial” is shown, if the tire has radial structure.

8 Manufacturer or brand name 䊊

Manufacturer or brand name is shown.

Other tire-related terminology: In addition to the many terms that are defined throughout this section, Intended Outboard Sidewall is (1) the sidewall that contains a whitewall, bears white lettering or bears manufacturer, brand and/or model name molding that is higher or deeper than the same molding on the other sidewall of the tire, or (2) the outward facing sidewall of an asymmetrical tire that has a particular side that must always face outward when mounted on a vehicle. Maintenance and do-it-yourself 8-31

TYPES OF TIRES WARNING ● When changing or replacing tires, be sure all four tires are of the same type (Example: Summer, All Season or Snow) and construction. An INFINITI retailer may be able to help you with information about tire type, size, speed rating and availability. ● Replacement tires may have a lower speed rating than the factory equipped tires, and may not match the potential maximum vehicle speed. Never exceed the maximum speed rating of the tire. ● Replacing tires with those not originally specified by INFINITI could affect the proper operation of the TPMS.

wall. Snow tires have better snow traction than All Season tires and may be more appropriate in some areas.

If you install snow tires, they must be the same size, brand, construction and tread pattern on all four wheels.

Summer tires

For additional traction on icy roads, studded tires may be used. However, some U.S. states and Canadian provinces prohibit their use. Check local, state and provincial laws before installing studded tires. Skid and traction capabilities of studded snow tires, on wet or dry surfaces, may be poorer than that of nonstudded snow tires.

INFINITI specifies summer tires on some models to provide superior performance on dry roads. Summer tire performance is substantially reduced in snow and ice. Summer tires do not have the tire traction rating M&S on the tire sidewall. If you plan to operate your vehicle in snowy or icy conditions, INFINITI recommends the use of SNOW tires or ALL SEASON tires on all four wheels.

Snow tires

● For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Information” (Canada) in the Warranty Information Booklet.

If snow tires are needed, it is necessary to select tires equivalent in size and load rating to the original equipment tires. If you do not, it can adversely affect the safety and handling of your vehicle.

All season tires

Generally, snow tires will have lower speed ratings than factory equipped tires and may not match the potential maximum vehicle speed. Never exceed the maximum speed rating of the tire.

INFINITI specifies all season tires on some models to provide good performance all year, including snowy and icy road conditions. All Season tires are identified by ALL SEASON and/or M&S (Mud and Snow) on the tire side-

8-32 Maintenance and do-it-yourself

TIRE CHAINS Use of tire chains may be prohibited according to location. Check the local laws before installing tire chains. When installing tire chains, make sure they are the proper size for the tires on your vehicle and are installed according to the chain manufacturer’s suggestions. Use only SAE Class S chains. Class “S” chains are used on vehicles with restricted tire to vehicle clearance. Vehicles that can use Class “S” chains are designed to meet the SAE standard minimum clearances between the tire and the closest vehicle suspension or body component required to accommodate the use of a winter traction device (tire chains or cables). The minimum clearances are determined using the factory equipped tire size. Other types may damage your vehicle. Use chain tensioners when

recommended by the tire chain manufacturer to ensure a tight fit. Loose end links of the tire chain must be secured or removed to prevent the possibility of whipping action damage to the fenders or underbody. If possible, avoid fully loading your vehicle when using tire chains. In addition, drive at a reduced speed. Otherwise, your vehicle may be damaged and/or vehicle handling and performance may be adversely affected. Tire chains must be installed only on the rear wheels and not on the front wheels. Never install tire chains on a TEMPORARY USE ONLY spare tire. Do not use tire chains on dry roads. Driving with tire chains in such conditions can cause damage to the various mechanisms of the vehicle due to some overstress.

CHANGING WHEELS AND TIRES Tire rotation Tires cannot be rotated on this vehicle because the front tires are a different size than the rear tires.

spare tire can be installed in place of the front and rear wheels. When installing the spare tire in the front wheel, the hole in the spare tire wheel must be aligned with the pin on the brake rotor. WARNING ● Retighten the wheel nuts when the ve-

hicle has been driven for 600 miles (1,000 km) (also in cases of a flat tire, etc.). ● For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Information” (Canada) in the Warranty Information Booklet.

SDI1663

1. Wear indicator 2. Wear indicator location mark

Tire wear and damage WARNING ● Tires should be periodically inspected

for wear, cracking, bulging or objects caught in the tread. If excessive wear, cracks, bulging or deep cuts are found, the tire(s) should be replaced.

A pin is on the front brake rotor to prevent the rear wheels from being installed in place of the front wheels. The Maintenance and do-it-yourself 8-33

● The original tires have built-in tread

wear indicators. When wear indicators are visible, the tire(s) should be replaced. ● Tires degrade with age and use. Have tires, including the spare, over 6 years old checked by a qualified technician, because some tire damage may not be obvious. Replace the tires as necessary to prevent tire failure and possible personal injury. ● Improper service of the spare tire may result in serious personal injury. If it is necessary to repair the spare tire, contact an INFINITI retailer. ● For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Information” (Canada) in the Warranty Information Booklet.

Replacing wheels and tires When replacing a tire, use the same size, tread design, speed rating and load carrying capacity

8-34 Maintenance and do-it-yourself

as originally equipped. (See “SPECIFICATIONS” in the “9. Technical and consumer information” section for recommended types and sizes of tires and wheels.)

WARNING ● The use of tires other than those recommended or the mixed use of tires of different brands, construction (bias, bias-belted or radial), or tread patterns can adversely affect the ride, braking, handling, ground clearance, body-to-tire clearance, tire chain clearance, speedometer calibration, headlight aim and bumper height. Some of these effects may lead to accidents and could result in serious personal injury. ● If the wheels are changed for any reason, always replace with wheels which have the same off-set dimension. Wheels of a different off-set could cause premature tire wear, degrade vehicle handling characteristics and/or interference with the brake discs/drums. Such interference can lead to decreased braking efficiency and/or early brake pad/shoe wear. See “WHEELS AND TIRES” in the “9. Technical and consumer information” section of this manual for wheel off-set dimensions.

● When a spare tire is mounted or a wheel is replaced, the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. Contact your INFINITI retailer as soon as possible for tire replacement and/or system resetting. ● Replacing tires with those not originally specified by INFINITI could affect the proper operation of the TPMS. ● Do not install a damaged or deformed wheel or tire even if it has been repaired. Such wheels or tires could have structural damage and could fail without warning. ● The use of retread tire is not recommended. ● For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Information” (Canada) in the Warranty Information Booklet.

Wheel balance Unbalanced wheels may affect vehicle handling and tire life. Even with regular use, wheels can get out of balance. Therefore, they should be balanced as required. Wheel balance service should be performed with the wheels off the vehicle. Spin balancing the wheels on the vehicle could lead to mechanical damage. For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Information” (Canada) in the INFINITI Warranty Information Booklet.

Care of wheels

Emergency tire puncture repair kit (if so equipped)

Spare tire (TEMPORARY USE ONLY (T-type) spare tire) (if so equipped)

The emergency tire puncture repair kit (Emergency Tire Sealant) is supplied with the vehicle instead of a spare tire. It can be used to temporarily repair minor tire punctures.

Observe the following precautions if the T-type spare tire must be used, otherwise your vehicle could be damaged or involved in an accident.

If possible, have the vehicle towed to a facility that can repair or replace the flat tire. Using the emergency tire puncture repair kit may cause a malfunction of the tire pressure sensor and cause the low tire pressure warning light to illuminate.

● The T-type spare tire should be used for emergency use. It should be replaced with the standard tire at the first opportunity to avoid possible tire or differential damage.

See “FLAT TIRE” in the “6. In case of emergency” section for more details.

WARNING

● Drive carefully while the TEMPORARY USE ONLY spare tire is installed. Avoid sharp turns and abrupt braking while driving.

● Inspect wheel rims regularly for dents or corrosion. Such damage may cause loss of pressure or poor seal at the tire bead.

● Periodically check spare tire inflation pressure. Always keep the pressure of the TEMPORARY USE ONLY spare tire at 60 psi (420 kPa, 4.2 bar). Always keep the pressure of the full size spare tire (if so equipped) at the recommended pressure for standard tires, as indicated on the Tire and Loading Information label. For Tire and Loading Information label location, see “Tire and Loading Information label” in the index of this manual.

● INFINITI recommends that the road wheels be waxed to protect against road salt in areas where it is used during winter.

● With the TEMPORARY USE ONLY spare tire installed do not drive your vehicle at speeds faster than 50 MPH (80 km/h).

● Wash the wheels when washing the vehicle to maintain their appearance. ● Clean the inner side of the wheels when the wheel is changed or the underside of the vehicle is washed. ● Do not use abrasive cleaners when washing the wheels.

Maintenance and do-it-yourself 8-35

● When driving on roads covered with snow or ice, the TEMPORARY USE ONLY spare tire should be used on the front wheels and original tire used on the rear wheels (drive wheels). Use tire chains only on the two rear original tires. ● Tire tread of the TEMPORARY USE ONLY spare tire will wear at a faster rate than the standard tire. Replace the spare tire as soon as the tread wear indicators appear. ● Do not use the spare tire on other vehicles. ● Do not use more than one spare tire at the same time.

CAUTION ● Do not use tire chains on a TEMPORARY USE ONLY spare tire. Tire chains will not fit properly and may cause damage to the vehicle. ● Because the TEMPORARY USE ONLY spare tire is smaller than the original tire, ground clearance is reduced. To avoid damage to the vehicle, do not drive over obstacles. Also do not drive the vehicle through an automatic car wash since it may get caught.

8-36 Maintenance and do-it-yourself

9 Technical and consumer information

Capacities and recommended fuel/lubricants . . . . . . . . 9-2 Fuel recommendation . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3 Engine oil and oil filter recommendation . . . . . . . . . 9-5 Air conditioning system refrigerant and lubricant recommendations . . . . . . . . . . . . . . . . . . . . . 9-6 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-7 Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-7 Wheels and tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-8 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-9 When traveling or registering your vehicle in another country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-9 Vehicle identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10 Vehicle Identification Number (VIN) plate . . . . . . . . 9-10 Vehicle identification number (chassis number) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10 Engine serial number . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10 F.M.V.S.S./C.M.V.S.S. certification label . . . . . . . . . . 9-11 Emission control information label . . . . . . . . . . . . . . . 9-11 Tire and loading information label . . . . . . . . . . . . . . . 9-11 Air conditioner specification label. . . . . . . . . . . . . . . 9-12 Installing front license plate. . . . . . . . . . . . . . . . . . . . . . . 9-12

Except for Aerodynamic Package models . . . . . . . . 9-13 For Aerodynamic Package models. . . . . . . . . . . . . . . .9-15 Vehicle loading information . . . . . . . . . . . . . . . . . . . . . . . 9-16 Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-16 Vehicle load capacity . . . . . . . . . . . . . . . . . . . . . . . . . . 9-17 Loading tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-18 Measurement of weights . . . . . . . . . . . . . . . . . . . . . . . 9-18 Towing a trailer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-19 Flat towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-19 Uniform tire quality grading . . . . . . . . . . . . . . . . . . . . . . . 9-19 Treadwear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-19 Traction AA, A, B and C . . . . . . . . . . . . . . . . . . . . . . . . 9-19 Temperature A, B and C . . . . . . . . . . . . . . . . . . . . . . . 9-20 Emission control system warranty . . . . . . . . . . . . . . . . . 9-20 Reporting safety defects . . . . . . . . . . . . . . . . . . . . . . . . . . 9-21 Readiness for Inspection/Maintenance (I/M) test . . . . 9-22 Event Data Recorders (EDR) . . . . . . . . . . . . . . . . . . . . . . . 9-22 Owner’s Manual/Service Manual order information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-23 In the event of a collision . . . . . . . . . . . . . . . . . . . . . . 9-23

CAPACITIES AND RECOMMENDED FUEL/LUBRICANTS The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure instructed in the “8. Maintenance and do-it-yourself” section to determine the proper refill capacity. Fuel Engine oil*1 Drain and refill With oil filter change Without oil filter change Cooling system Automatic transmission model Manual transmission model

US measure 20 gal

With reservoir Reservoir With reservoir Reservoir

Automatic transmission fluid Manual transmission gear oil Differential gear oil

Power steering fluid (PSF) Brake and clutch fluid Multi-purpose grease Without limited slip differential With limited slip differential Air conditioning system refrigerant Air conditioning system lubricants

Capacity (Approximate) Imp measure 16-5/8 gal

Recommended specifications Liter 76

See “FUEL RECOMMENDATION” later in this section.

5-1/8 qt 4-7/8 qt

4-3/8 qt 4 qt

4.9 4.6

•Engine oil with API Certification Mark*2, *3 •Viscosity SAE 5W-30

9 qt 7/8 qt 9-1/8 qt 7/8 qt — —

7-1/2 qt 3/4 qt 7-5/8 qt 3/4 qt — —

8.5 0.8 8.6 0.8 — —

Pre-diluted Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent

—

—

—

Refill to the proper oil level according to the instructions in the “8. Maintenance and do-it-yourself” section. — — — —

— — — —

— — — —

Genuine NISSAN Matic S ATF*4 Genuine NISSAN Manual Transmission Fluid (MTF) HQ Multi 75W-85 or API GL-4, Viscosity SAE 75W-85 For M/T models: Genuine NISSAN Differential Oil Hypoid Super GL-5 80W-90 or API GL-5 Viscosity SAE 80W-90*5All other models: API GL-5 Synthetic Gear Oil, Viscosity SAE 75W-90*6 Genuine NISSAN PSF or equivalent*7 Genuine NISSAN Super Heavy Duty Brake Fluid*8 or equivalent DOT 3 NLGI No. 2 (Lithium soap base) HFC-134a (R-134a)*9 NISSAN A/C System Oil Type S or exact equivalent Genuine NISSAN Windshield Washer Concentrate Cleaner & Antifreeze or equivalent

Window washer fluid — — — *1: For additional information, see “ENGINE OIL” in the “8. Maintenance and do-it-yourself” section for changing engine oil. *2: For additional information, see “ENGINE OIL AND OIL FILTER RECOMMENDATION” later in this section. *3: INFINITI recommends Genuine NISSAN Ester Engine Oil available at your INFINITI retailer. *4: Using automatic transmission fluid other than Genuine NISSAN Matic S ATF will cause deterioration in driveability and automatic transmission durability, and may damage the automatic transmission, which is not covered by the INFINITI new vehicle limited warranty. *5: For hot climates, viscosity SAE90 is suitable for ambient temperatures above 32°F (0°C). *6: See an INFINITI retailer for service for synthetic oil. *7: DEXRONTMVI type ATF may also be used. *8: Available in mainland US through an INFINITI retailer. *9: For additional information, see “VEHICLE IDENTIFICATION” later in this section for air conditioner specification label.

9-2 Technical and consumer information

FUEL RECOMMENDATION VQ37VHR engine Use unleaded premium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research octane number 96). If premium gasoline is not available, unleaded regular gasoline with an octane rating of 87 AKI number (Research octane number 91) may be temporarily used, but only under the following precautions: ● Have the fuel tank filled only partially with unleaded regular gasoline, and fill up with unleaded premium gasoline as soon as possible. ● Avoid full throttle driving and abrupt acceleration. However, for maximum vehicle performance, the use of unleaded premium gasoline is recommended.

CAUTION ● Using a fuel other than that specified could adversely affect the emission control system, and may also affect warranty coverage. ● Under no circumstances should a leaded gasoline be used, because this will damage the three-way catalyst.

● Do not use E-85 fuel in your vehicle. Your vehicle is not designed to run on E-85 fuel. Using E-85 fuel can damage the fuel system components and is not covered by the INFINITI vehicle limited warranty.

Gasoline specifications INFINITI recommends using gasoline that meets the World-Wide Fuel Charter (WWFC) specifications where it is available. Many of the automobile manufacturers developed this specification to improve emission system and vehicle performance. Ask your service station manager if the gasoline meets the World-Wide Fuel Charter (WWFC) specifications.

Reformulated gasoline Some fuel suppliers are now producing reformulated gasolines. These gasolines are specially designed to reduce vehicle emissions. INFINITI supports efforts towards cleaner air and suggests that you use reformulated gasoline when available.

Gasoline containing oxygenates Some fuel suppliers sell gasoline containing oxygenates such as ethanol, MTBE and methanol with or without advertising their presence. INFINITI does not recommend the use of fuels of

which the oxygenate content and the fuel compatibility for your INFINITI cannot be readily determined. If in doubt, ask your service station manager. If you use oxygenate-blend gasoline, please take the following precautions as the usage of such fuels may cause vehicle performance problems and/or fuel system damage. ● The fuel should be unleaded and have an octane rating no lower than that recommended for unleaded gasoline. ● If an oxygenate-blend, excepting a methanol blend, is used, it should contain no more than 10% oxygenate. (MTBE may, however, be added up to 15%.) ● If a methanol blend is used, it should contain no more than 5% methanol (methyl alcohol, wood alcohol). It should also contain a suitable amount of appropriate cosolvents and corrosion inhibitors. If not properly formulated with appropriate cosolvents and corrosion inhibitors, such methanol blends may cause fuel system damage and/or vehicle performance problems. At this time, sufficient data is not available to ensure that all methanol blends are suitable for use in INFINITI vehicles.

Technical and consumer information 9-3

If any undesirable driveability problems such as engine stalling or hard hot starting are experienced after using oxygenate-blend fuels, immediately change to a non-oxygenate fuel or a fuel with a low blend of MTBE. Take care not to spill gasoline during refueling. Gasoline containing oxygenates can cause paint damage.

E-85 fuel E-85 fuel is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. E-85 can only be used in a Flexible Fuel Vehicle (FFV). Do not use E-85 fuel in your vehicle. U.S. government regulations require fuel ethanol dispensing pumps to be identified by a small, square, orange and black label with the common abbreviation or the appropriate percentage for that region.

Aftermarket fuel additives INFINITI does not recommend the use of any aftermarket fuel additives (Example: fuel injector cleaner, octane booster, intake valve deposit removers, etc.) which are sold commercially. Many of these additives intended for gum, varnish or deposit removal may contain active solvent or similar ingredients that can be harmful to the fuel system and engine.

9-4 Technical and consumer information

Octane rating tips Using unleaded gasoline with an octane rating lower than recommended above can cause persistent, heavy spark knock. (Spark knock is a metallic rapping noise.) If severe, this can lead to engine damage. If you detect a persistent heavy spark knock even when using gasoline of the stated octane rating, or if you hear steady spark knock while holding a steady speed on level roads, have an INFINITI retailer correct the condition. Failure to correct the condition is misuse of the vehicle, for which INFINITI is not responsible. Incorrect ignition timing will result in knocking, after-run or overheating. This in turn may cause excessive fuel consumption or damage to the engine. If any of the above symptoms are encountered, have your vehicle checked at an INFINITI retailer or other competent service facility. However, now and then you may notice light spark knock for a short time while accelerating or driving up hills. This is no cause for concern, because you get the greatest fuel benefit when there is light spark knock for a short time under heavy engine load.

CAUTION ● Your vehicle is not designed to run on E-85 fuel. Using E-85 fuel in a vehicle not specifically designed for E-85 fuel can damage fuel system components and is not covered by the INFINITI new vehicle limited warranty. ● E-85 is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. ● U.S. government regulations require ethanol dispensing pumps to be identified by a small, square, orange and black label with the common abbreviation or the appropriate percentage for that region.

Oil which may contain foreign matter or has been previously used should not be used.

Oil viscosity The engine oil viscosity or thickness changes with temperature. Because of this, it is important that the engine oil viscosity be selected based on the temperatures at which the vehicle will be operated before the next oil change. Choosing an oil viscosity other than that recommended could cause serious engine damage.

Selecting the correct oil filter STI0505

1. API certification mark 2. API service symbol

ENGINE OIL AND OIL FILTER RECOMMENDATION Selecting the correct oil It is essential to choose the correct grade, quality, and viscosity engine oil to ensure satisfactory engine life and performance, see “CAPACITIES AND RECOMMENDED FUEL/LUBRICANTS” earlier in this section. INFINITI recommends the use of an energy conserving oil in order to improve fuel economy.

Select only engine oils that meet the American Petroleum Institute (API) certification or International Lubricant Standardization and Approval Committee (ILSAC) certification and SAE viscosity standard. These oils have the API certification mark on the front of the container. Oils which do not have the specified quality label should not be used as they could cause engine damage.

Oil additives INFINITI does not recommend the use of oil additives. The use of an oil additive is not necessary when the proper oil type is used and maintenance intervals are followed.

Your new vehicle is equipped with a highquality genuine NISSAN oil filter. When replacing, use the genuine oil filter or its equivalent for the reason described in change intervals.

Change intervals The oil and oil filter change intervals for your engine are based on the use of the specified quality oils and filters. Oil and filter other than the specified quality, or oil and filter change intervals longer than recommended could reduce engine life. Damage to engines caused by improper maintenance or use of incorrect oil and filter quality and/or viscosity is not covered by the new INFINITI vehicle limited warranties.

Technical and consumer information 9-5

Your engine was filled with a high quality engine oil when it was built. You do not have to change the oil before the first recommended change interval. Oil and filter change intervals depend upon how you use your vehicle. Operation under the following conditions may require more frequent oil and filter changes. ● repeated short distance driving at cold outside temperatures, ● driving in dusty conditions, ● extensive idling, ● stop and go “rush hour” traffic, Refer to the “INFINITI Service and Maintenance Guide” for the maintenance schedule.

AIR CONDITIONING SYSTEM REFRIGERANT AND LUBRICANT RECOMMENDATIONS The air conditioning system in your INFINITI vehicle must be charged with the refrigerant HFC134a (R-134a) and the lubricant, NISSAN A/C system oil Type S or the exact equivalents.

9-6 Technical and consumer information

CAUTION The use of any other refrigerant or lubricant will cause severe damage to the air conditioning system and will require the replacement of all air conditioner system components. The refrigerant HFC-134a (R-134a) in your INFINITI vehicle will not harm the earth’s ozone layer. Although this refrigerant does not affect the earth’s atmosphere, certain governmental regulations require the recovery and recycling of any refrigerant during automotive air conditioning system service. Your INFINITI retailer has the trained technicians and equipment needed to recover and recycle your air conditioning system refrigerant. Contact an INFINITI retailer when servicing your air conditioning system.

SPECIFICATIONS ENGINE Model

VQ37VHR

Type

Gasoline, 4-cycle

Cylinder arrangement

6-cylinder, V-slanted at 60°

Bore × Stroke

in (mm)

3.760 × 3.385 (95.5 × 86.0)

Displacement

cu in (cm3)

225.54 (3,696)

Firing order

1-2-3-4-5-6

Idle speed

rpm

Ignition timing (B.T.D.C.)

degree/rpm

Spark plug

Standard

FXE24HR-11

Spark plug gap (Normal)

in (mm)

0.043 (1.1)

Camshaft operation

No adjustment is necessary. STI0425

VQ37VHR engine

Timing chain

This spark ignition system complies with the Canadian standard ICES-002.

Technical and consumer information 9-7

WHEELS AND TIRES Road wheel Type

Size

Aluminum

Front:

18 × 8J

1.69 (43)

Rear:

18 × 8-1/2J

1.06 (27)

Front:

19 × 8-1/2J

1.69 (43)

Rear:

19 × 9J

1.18 (30)

Spare*1

Offset in (mm)

18 × 4T

0 (0)

Type

Size

Pressure PSI (kPa) [Cold]

Conventional

Front:

P225/50R18 94V

Rear:

P245/45R18 96V

Front:

225/45R19 96W XL

Rear:

245/40R19 98W XL

Tire

Spare (T-type)*1

T145/70R18 107M

*1: if so equipped.

9-8 Technical and consumer information

38 (260)

39 (270)

60 (420)

WHEN TRAVELING OR REGISTERING YOUR VEHICLE IN ANOTHER COUNTRY DIMENSIONS in (mm) Overall length (with front license plate)

183.5 (4,661)*1 184.0 (4,672)*2 185.4 (4,710)*3

Overall length (without front license plate)

183.3 (4,657)*1 184.0 (4,672)*2 185.2 (4,705)*3

Overall width

72.9 (1,852)

Overall height

55.1 (1,399)*4 55.1 (1,400)*5

Front tread

60.8 (1,545)

Rear tread

62.8 (1,595)*4 62.6 (1,590)*5

Wheelbase

112.2 (2,850)

*1: Without Aero Bumper *2: With Aero Bumper *3: Aerodynamic Package models

If you plan to travel in another country, you should first find out if the fuel available is suitable for your vehicle’s engine. Using fuel with too low an octane rating may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline. Therefore, avoid taking your vehicle to areas where appropriate fuel is not available. When transferring the registration of your vehicle to another country, state, province or district, it may be necessary to modify the vehicle to meet local laws and regulations. The laws and regulations for motor vehicle emission control and safety standards vary according to the country, state, province or district; therefore, vehicle specifications may differ. When any vehicle is to be taken into another country, state, province or district and registered, its modifications, transportation, and registration are the responsibility of the user. INFINITI is not responsible for any inconvenience that may result.

*4: 18-in tire models *5: 19-in tire models

Technical and consumer information 9-9

VEHICLE IDENTIFICATION

STI0431

STI0492

VEHICLE IDENTIFICATION NUMBER (VIN) PLATE

VEHICLE IDENTIFICATION NUMBER (chassis number)

The vehicle identification number plate is attached as shown. This number is the identification for your vehicle and is used in the vehicle registration.

The number is stamped as shown in the engine compartment.

9-10 Technical and consumer information

STI0509

ENGINE SERIAL NUMBER The number is stamped on the engine as shown.

STI0800

STI0422

STI0801

F.M.V.S.S./C.M.V.S.S. CERTIFICATION LABEL

EMISSION CONTROL INFORMATION LABEL

TIRE AND LOADING INFORMATION LABEL

The Federal/Canadian Motor Vehicle Safety Standards (F.M.V.S.S./C.M.V.S.S.) certification label is affixed as shown. This label contains valuable vehicle information, such as: Gross Vehicle Weight Ratings (GVWR), Gross Axle Weight Rating (GAWR), month and year of manufacture, Vehicle Identification Number (VIN), etc. Review it carefully.

The emission control information label is attached as shown.

The cold tire pressure is shown on the Tire and Loading information label affixed to the pillar as illustrated.

Technical and consumer information 9-11

INSTALLING FRONT LICENSE PLATE Use the following steps to mount the license plate: Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag. ● License plate bracket ● J-nut × 2 (except for Aerodynamic Package models) ● Screw × 2 ● Screw grommet × 2 STI0495

AIR CONDITIONER SPECIFICATION LABEL The air conditioner specification label is attached as shown.

9-12 Technical and consumer information

Only use the recommended mounting position or Intelligent Cruise Control (ICC) sensor obstruction (if so equipped) may result.

EXCEPT FOR AERODYNAMIC PACKAGE MODELS 1. Park the vehicle on flat, level ground. A on 2. Locate the center position indicator 䊊 the lower part of the grille. Measure straight down from the edge where the bumper and grille meet to the aligning B , keeping the tape measure lined holes 䊊 up with the center position indicator. B with a felt-tip pen. 3. Mark the holes 䊊

4. For Sports models: Carefully drill the two B using a 0.39 in (10 mm) aligning holes 䊊 drill bit at the marked locations. (Be sure that the drill only goes through the bumper fascia.) C 5. For Sports models: Line up the bosses 䊊 or license plate bracket with the holes and hold the license plate bracket in place. D with a 6. Mark the center of the holes 䊊 felt-tip pen.

7. Carefully drill the two pilot holes using a 0.39 in (10 mm) drill bit at the marked locations. (Be sure that the drill only goes through the bumper fascia.) STI0799

Except for Aerodynamic Package models

8. Insert grommets into the hole on the fascia.

Technical and consumer information 9-13

9. Insert a flat-blade screwdriver into the grommet hole to add 90° turn onto the E . part 䊊 10. Insert a J-nut into the license plate bracket before placing the license plate bracket on the fascia. 11. Install the license plate bracket with screws. 12. Install the license plate with bolts that are no longer than 0.55 in (14 mm).

9-14 Technical and consumer information

FOR AERODYNAMIC PACKAGE MODELS 1. Park the vehicle on flat, level ground. 2. Temporarily fit the license plate bracket on the center of the front bumper fascia. 3. For horizontal position adjustment, place and hold the underside tab of the license plate bracket on the front bumper fascia to align the tab’s V notch with the edge of a bead on the upper side of front bumper fascia. 4. Hold the license plate bracket and mark A on the bumper facia the points 䊊 B with a through the center of the holes 䊊 felt-tip pen. 5. Remove the license plate bracket. 6. Detach the license plate bracket and cut the underside tab by using a cutter. A 7. Carefully drill two shallow pilot holes 䊊 using a 0.39 in (10 mm) drill bit at the marked locations. (Be sure that the drill only goes through the fascia, or damage to the nut may occur.)

8. Insert grommets into the hole on the front bumper fascia.

STI0805

For Aerodynamic Package models

9. Insert a flat-blade screwdriver into the grommet hole to add a 90° turn onto the C . part 䊊

Technical and consumer information 9-15

VEHICLE LOADING INFORMATION 10. Install the license plate bracket with the bolts. 11. Install the license plate with bolts that are not longer than 0.55 in (14 mm).

WARNING

● GVW (Gross Vehicle Weight) - curb

● It is extremely dangerous to ride in a

cargo area inside the vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. ● Do not allow people to ride in any area of vehicle that is not equipped with seats and seat belts. ● Be sure everyone in your vehicle is in a seat and using a seat belt properly.

●

●

TERMS It is important to familiarize yourself with the following terms before loading your vehicle:

●

● Curb Weight (actual weight of your

vehicle) - vehicle weight including: standard and optional equipment, fluids, emergency tools, and spare tire assembly. This weight does not include passengers and cargo.

9-16 Technical and consumer information

●

weight plus the combined weight of passengers and cargo. GVWR (Gross Vehicle Weight Rating) maximum total combined weight of the unloaded vehicle, passengers, luggage, hitch, trailer tongue load and any other optional equipment. This information is located on the F.M.V.S.S./C.M.V.S.S. label. GAWR (Gross Axle Weight Rating) maximum weight (load) limit specified for the front or rear axle. This information is located on the F.M.V.S.S./C.M.V.S.S. label. GCWR (Gross Combined Weight Rating) - The maximum total weight rating of the vehicle, passengers, cargo, and trailer. Vehicle Capacity Weight, Load limit, Total load capacity - maximum total weight limit specified of the load (passengers and cargo) for the vehicle. This is the maximum combined

weight of occupants and cargo that can be loaded into the vehicle. If the vehicle is used to tow a trailer, the trailer tongue weight must be included as part of the cargo load. This information is located on the Tire and Loading Information label. ● Cargo capacity - permissible weight of cargo, the weight of total occupants weight subtracted from the load limit. STI0365

VEHICLE LOAD CAPACITY Do not exceed the load limit of your vehicle shown as “The combined weight of occupants and cargo” on the Tire and Loading Information label. Do not exceed the number of occupants shown as “Seating Capacity” on the Tire and Loading Information label. To get “the combined weight of occupants and cargo”, add the weight of all occupants, then add the total luggage weight. Examples are shown in the illustration.

Steps for determining correct load limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs. Technical and consumer information 9-17

4. The resulting figure equals the avail-

able amount of cargo and luggage load capacity. For example, if the XXX amount equals 1400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1400 ⫺ 750 (5 x 150) = 650 lbs or 640 ⫺ 340 (5 x 70) = 300 kg.) 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. Before driving a loaded vehicle, confirm that you do not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR) for your vehicle. (See “MEASUREMENT OF WEIGHTS” later in this section.) 9-18 Technical and consumer information

Also check tires for proper inflation pressures. See the Tire and Loading Information label.

LOADING TIPS ● The GVW must not exceed GVWR or GAWR as specified on the F.M.V.S.S./ C.M.V.S.S. certification label. ● Do not load the front and rear axle to the GAWR. Doing so will exceed the GVWR. WARNING ● Properly secure all cargo to help pre-

vent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or collision, unsecured cargo could cause personal injury. ● Do not load your vehicle any heavier than the GVWR or the maximum front and rear GAWRs. If you do, parts of your vehicle can break, tire damage could occur, or it can change the way your vehicle handles. This could result in loss of control and cause personal injury.

● Overloading could not only shorten the

life of your vehicle and the tires, but also could lead to hazardous vehicle handling and long braking distance. This may cause a premature tire malfunction, which could result in a serious accident and personal injury. Failures caused by overloading are not covered by the vehicle’s warranty.

MEASUREMENT OF WEIGHTS Secure loose items to prevent weight shifts that could affect the balance of your vehicle. When the vehicle is loaded, drive to a scale and weigh the front and the rear wheels separately to determine axle loads. Individual axle loads should not exceed either of the gross axle weight ratings (GAWR). The total of the axle loads should not exceed the gross vehicle weight rating (GVWR). These ratings are given on the vehicle certification label. If weight ratings are exceeded, move or remove items to bring all weights below the ratings.

TOWING A TRAILER

UNIFORM TIRE QUALITY GRADING

Do not tow a trailer with your vehicle.

Automatic transmission

FLAT TOWING

To tow a vehicle equipped with an automatic transmission, an appropriate vehicle dolly MUST be placed under the towed vehicle’s drive wheels. Always follow the dolly manufacturer’s recommendations when using their product.

Towing your vehicle with all four wheels on the ground is sometimes called flat towing. This method is sometimes used when towing a vehicle behind a recreational vehicle, such as a motor home.

CAUTION ● Failure to follow these guidelines can result in severe transmission damage. ● Whenever flat towing your vehicle, always tow forward, never backward. ● DO NOT tow any automatic transmission vehicle with all four wheels on the ground (flat towing). Doing so WILL DAMAGE internal transmission parts due to lack of transmission lubrication. ● For emergency towing procedures refer to “TOWING RECOMMENDED BY INFINITI” in the “6. In case of emergency” section of this manual.

Manual transmission ● Always tow with the manual transmission in Neutral. ● Your vehicle speed should never exceed 70 MPH (112 km/h) when flat towing your vehicle. ● After towing 500 miles, start and idle the engine with the transmission in Neutral for two minutes. Failure to idle the engine after every 500 miles of towing may cause damage to the transmission’s internal parts.

DOT (Department Of Transportation) Quality Grades: All passenger car tires must conform to federal safety requirements in addition to these grades. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A

TREADWEAR The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half (1 1/2) times as well on the government course as a tire graded 100. The relative performance of tires depends upon actual conditions of their use, however, and may depart significantly from the norm due to variations in driving habits, service practices and differences in road characteristics and climate.

TRACTION AA, A, B AND C The traction grades, from highest to lowest, are AA, A, B and C. Those grades represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified

Technical and consumer information 9-19

EMISSION CONTROL SYSTEM WARRANTY government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.

WARNING The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics.

TEMPERATURE A, B AND C The temperature grades A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law.

9-20 Technical and consumer information

WARNING The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, under-inflation, or excessive loading, either separately or in combination, can cause heat build-up and possible tire failure.

Your INFINITI is covered by the following emission warranties. For US: ● Emission Defects Warranty ● Emissions Performance Warranty (See Warranty Information Booklet for details.) For Canada: Emission Control System Warranty Details of these warranties may be found with other vehicle warranties in your Warranty Information Booklet (Warranty and Roadside Assistance Information (Canada only)) that comes with your INFINITI. If you did not receive a Warranty Information Booklet (Warranty and Roadside Assistance Information (Canada only)), or it has become lost, you may obtain a replacement by writing to: ● INFINITI Division Nissan North America, Inc. Consumer Affairs Department P.O. Box 685003 Franklin, TN 37068-5003 ● Nissan Canada Inc. 5290 Orbitor Drive Mississauga, Ontario, L4W 4Z5

REPORTING SAFETY DEFECTS For USA If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying INFINITI. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your retailer, or INFINITI. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888327-4236 (TTY: 1-800-424-9153); go to http://www.safercar.gov; or write to: Administrator, NHTSA, 400 Seventh Street, SW., Washington, D.C. 20590. You can also obtain other information about motor vehicle safety from http://www.safercar.gov.

You may notify INFINITI by contacting our Consumer Affairs Department, toll-free, at 1-800-662-6200. For Canada If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform Transport Canada in addition to notifying INFINITI.

Additional information concerning motor vehicle safety may be obtained from Transport Canada’s Road Safety Information Centre at 1-800-333-0371 or online at www.tc.gc.ca/roadsafety (English speakers) or www.tc.gc.ca/securiteroutiere (French speakers). To notify INFINITI of any safety concerns please contact our Consumer Information Centre toll free at 1-800-361-4792.

If Transport Canada receives complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may request that INFINITI conduct a recall campaign. However, Transport Canada cannot become involved in individual problems between you, your retailer, or INFINITI. You may contact Transport Canada’s Defect Investigations and Recalls Division toll free at 1-800-333-0510. You may also report safety defects online at: https://wwwapps.tc.gc.ca/Saf-SecSur/7/ PCDB-BDPP/Index.aspx. Technical and consumer information 9-21

READINESS FOR INSPECTION/ MAINTENANCE (I/M) TEST

EVENT DATA RECORDERS (EDR)

Due to legal requirements in some states/areas or provinces, your vehicle may be required to be in what is called the “ready condition” for an Inspection/Maintenance (I/M) test of the emission control system.

This vehicle is equipped with an Event Data Recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as:

The vehicle is set to the “ready condition” when it is driven through certain driving patterns. Usually, the “ready condition” can be obtained by ordinary usage of the vehicle. If a powertrain system component is repaired or the battery is disconnected, the vehicle may be reset to a “not ready condition”. Before taking the I/M test, check the vehicle’s inspection/maintenance test readiness condition. Place the ignition switch in the ON position without starting the engine. If the Malfunction Indicator Light (MIL) comes on steady for 20 seconds and then blinks for 10 seconds, the I/M test condition is “not ready”. If the MIL does not blink after 20 seconds, the I/M test condition is “ready”. Contact an INFINITI retailer to set the “ready condition” or to prepare the vehicle for testing.

9-22 Technical and consumer information

● How various systems in your vehicle were operating; ● Whether or not the driver and passenger safety belts were buckled/fastened; ● How far (if at all) the driver was depressing the accelerator and/or brake pedal; and, ● How fast the vehicle was traveling. ● Sounds are not recorded. These data can help provide a better understanding of the circumstances in which crashes and injuries occur. NOTE: EDR data are recorded by your vehicle only if a nontrivial crash situation occurs; no data are recorded by the EDR under normal driving conditions and no personal data (e.g. name, gender, age and crash location) are recorded. However, other parties, such as law enforcement, could combine the EDR data

with the type of personally identifying data routinely acquired during a crash investigation. To read data recorded by an EDR, special equipment is required and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer and INFINITI retailer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR. EDR data will only be accessed with the consent of the vehicle owner or lessee or as otherwise required or permitted by law.

OWNER’S MANUAL/SERVICE MANUAL ORDER INFORMATION Genuine INFINITI Service Manual for this model and prior models can be purchased. A genuine INFINITI Service Manual is the best source of service and repair information for your vehicle. This manual is the same one used by the factory trained technicians working at an INFINITI retailer. Genuine INFINITI Owner’s Manual can also be purchased.

IN THE EVENT OF A COLLISION

In the USA:

Insist on the use of Genuine INFINITI Collision Parts!

For current pricing and availability of genuine INFINITI Service Manuals , contact:

Unfortunately, accidents do occur. In this unlikely event, there is some important information you should know. Many insurance companies routinely authorize the use of non-genuine collision parts in order to cut costs, among other reasons.

In Canada:

If you want your vehicle to be restored using parts made to INFINITI’s original exacting specifications — if you want to help it to last and hold its resale value, the solution is simple. Tell your insurance agent and your repair shop to only use Genuine INFINITI Collision Parts. INFINITI does not warrant non-INFINITI parts, nor does INFINITI’s warranty apply to damage caused by a non-genuine part.

To purchase a copy of a genuine INFINITI Service Manual or Owner’s Manual for this model year and prior, contact an INFINITI retailer. For the phone number and location of an INFINITI retailer in your area call the INFINITI Satisfaction Center at 1-800-361-4792 and a bilingual INFINITI representative will assist you.

Using Genuine INFINITI Parts can help protect your personal safety, preserve your warranty protection and maintain the resale value of your vehicle. And if your vehicle was leased, using Genuine INFINITI Parts may prevent or limit unnecessary excess wear and tear expenses at the end of your lease.

1-800-450-9491 www.infiniti-techinfo.com For current pricing and availability of genuine INFINITI Owner’s Manuals , contact: 1-800-247-5321

Non-genuine (imitation) parts may not provide such built in safeguards. Also, non-genuine parts often show premature wear, rust and corrosion.

Why should you take a chance? In over 40 states, the law says you must be advised if non-genuine parts are used to repair your vehicle. And some states have enacted laws that restrict insurance companies from authorizing the use of non-genuine collision parts during the new vehicle warranty. These laws help protect you, so you can take action to protect yourself.

It’s your right! If you should need further information visit us at: www.InfinitiUSA.com (for U.S. customers) or www.infiniti.ca (for Canadian customers)

INFINITI designs its hoods with crumple zones to minimize the risk that the hood will penetrate the windshield of your vehicle in an accident.

Technical and consumer information 9-23

MEMO

9-24 Technical and consumer information

10 Index A ABS (Anti-lock Braking System) . . . . . . . .5-51 Advanced air bag system . . . . . . . . . . . .1-41 Air bag system Advanced air bag system . . . . . . . . . .1-41 Door-mounted curtain side-impact supplemental air bag system . . . . . . .1-45 Front passenger air bag and status light. . . . . . . . . . . . . . . . . . . . . .1-42 Front-seat mounted side-impact supplemental air bag system . . . . . . .1-45 Air bag warning labels . . . . . . . . . . . . .1-48 Air bag warning light . . . . . . . . . . .1-48, 2-12 Air cleaner housing filter . . . . . . . . . . . .8-17 Air conditioner Air conditioner service . . . . . . . . . . .4-36 Air conditioner specification label . . . . .9-12 Air conditioning system refrigerant and lubricant recommendations . . .4-36, 9-6 Automatic climate control . . . . . . . . .4-29 In-cabin microfilter . . . . . . . . . . . . .4-36 Alarm, How to stop alarm (see vehicle security system). . . . . . . . . . . . . . . . .2-27 Alcohol, drugs and driving . . . . . . . . . . .5-7 Antenna . . . . . . . . . . . . . . . . . . . . .4-84 Anti-lock Braking System (ABS) . . . . . . . .5-51 Anti-lock braking system (ABS) warning light . . . . . . . . . . . . . . . . . . . . . . . .2-9 Appearance care Exterior appearance care . . . . . . . . . .7-2 Interior appearance care. . . . . . . . . . .7-4

Ashtrays (See cigarette lighter and ashtrays). . . . . . . . . . . . . . . . . . . . .2-42 Audible reminders . . . . . . . . . . . . . . . .2-15 Audio operation precautions. . . . . . . . . .4-37 Audio system . . . . . . . . . . . . . . . . . .4-37 Steering wheel audio controls. . . . . . .4-82 Auto closure . . . . . . . . . . . . . . . . . . .3-28 Autolight system . . . . . . . . . . . . . . . .2-32 Automatic Automatic adjusting function (front windows) . . . . . . . . . . . . . . . . . .2-48 Automatic climate control . . . . . .4-30, 4-33 Automatic transmission fluid (ATF) . . . .8-11 Climate control . . . . . . . . . . . . . . .4-29 Door locks. . . . . . . . . . . . . . . . . . .3-5 Drive positioner . . . . . . . . . . . . . . .3-36 Driving with automatic transmission . . .5-12 Seat positioner . . . . . . . . . . . . . . .3-36 Average fuel consumption and speed . . . .2-24 Avoiding collision and rollover . . . . . . . . .5-5 B Battery . . . . . . . . . . . . . . . . . . . . . .8-13 Battery saver system . . . . . . . . . . . .2-34 Intelligent Key. . . . . . . . . . . . . . . .8-22 Variable voltage control system . . . . . .8-15 Before starting the engine . . . . . . . . . . .5-11 Bluetooth姞 hands-free phone system (models with navigation system) . . . . . . .4-85 Bluetooth姞 hands-free phone system (models without navigation system) . . . . .4-96

Bluetooth姞 streaming audio . . . . . . . . . .4-66 Booster seats . . . . . . . . . . . . . . . . . .1-31 Brake Anti-lock Braking System (ABS) . . . . . .5-51 Brake and clutch fluid . . . . . . . . . . .8-12 Brake fluid . . . . . . . . . . . . . . . . . .8-12 Brake system . . . . . . . . . . . . . . . .5-48 Parking brake operation . . . . . . . . . .5-18 Warning light . . . . . . . . . . . . . . . . .2-9 Break-in schedule. . . . . . . . . . . . . . . .5-42 Brightness control Display ON/OFF button . . . . . . . . . . .4-7 Instrument panel . . . . . . . . . . . . . .2-35 Bulb check/instrument panel . . . . . . . . . .2-8 Bulb replacement . . . . . . . . . . . . . . . .8-24 C Cabin air filter. . . . . . . . . . . . . . . . . .4-36 Capacities and recommended fuel/ lubricants . . . . . . . . . . . . . . . . . . . . .9-2 Car phone or CB radio . . . . . . . . . . . . .4-85 Catalytic converter, Three way catalyst . . . .5-2 CD/CF/USB memory care and cleaning . . . .4-81 Center multi-function control panel . . . . . .4-2 Child restraints . . . . . . . . . . . . . . . . .1-19 Booster seats . . . . . . . . . . . . . . . .1-31 Installation using LATCH Lower Anchors .1-23 Installation using the seat belts . . . . . .1-25 Precautions on child restraints. . . . . . .1-19 Child safety . . . . . . . . . . . . . . . . . . .1-13 Chimes, Audible reminders. . . . . . . . . . .2-15

Cigarette lighter and ashtrays . . . . . . . . .2-42 Circuit breaker, Fusible link . . . . . . . . . .8-20 Cleaning exterior and interior. . . . . . . .7-2, 7-4 Climate control, Automatic climate control . .4-29 Clock . . . . . . . . . . . . . . . . . . . . . . .2-40 Closing the retractable hard top . . . . . . . .3-24 Clutch fluid . . . . . . . . . . . . . . . . . . . .8-12 Cockpit . . . . . . . . . . . . . . . . . . . . . . .2-2 Cold weather driving. . . . . . . . . . . . . . .5-54 Compact Disc (CD) player (See audio system) . . . . . . . . . . . . . . .4-56 Compact spare tire. . . . . . . . . . . . . . . .8-35 Console box . . . . . . . . . . . . . . . . . . .2-45 Controller, Center multi-function control panel . . . . . . . . . . . . . . . . . . . . . . . .4-4 Controls Control panel button . . . . . . . . . . . . .4-2 INFINITI Controller . . . . . . . . . . . . . . .4-4 Coolant Capacities and recommended fuel/ lubricants . . . . . . . . . . . . . . . . . . .9-2 Changing engine coolant . . . . . . . . . . .8-8 Checking engine coolant level . . . . . . . .8-7 Corrosion protection . . . . . . . . . . . . . . .7-6 Cruise control . . . . . . . . . . . . . . . . . . .5-19 Fixed speed cruise control (on ICC system) . . . . . . . . . . . . . . .5-38 Intelligent cruise control (ICC) system . . .5-21 Cup holders . . . . . . . . . . . . . . . . . . .2-43 Current fuel consumption . . . . . . . . . . . .2-24

10-2

D Daytime running light system . . . . . . . . .2-34 Defroster switch, Rear window and outside mirror defroster switch . . . . . . . . .2-31 Dimensions . . . . . . . . . . . . . . . . . . . .9-9 Distance to empty . . . . . . . . . . . . . . . .2-24 Door/trunk open warning . . . . . . . . . . . .2-19 Dot matrix liquid crystal display . . . . . . . .2-16 Drive belt . . . . . . . . . . . . . . . . . . . . .8-16 Drive positioner . . . . . . . . . . . . . . . . .3-36 Driving Cold weather driving. . . . . . . . . . . . .5-54 Driving with automatic transmission . . . .5-12 Driving with manual transmission . . . . .5-16 Precautions when starting and driving . . .5-2 DS (Drive Sport) mode . . . . . . . . . . . . . .5-14 DVD player operation . . . . . . . . . . . . . .4-58 E Economy, Fuel . . . . . . . . . . . . . . . . . .5-43 Elapsed time . . . . . . . . . . . . . . . . . . .2-24 Elapsed time and trip odometer . . . . . . . .2-24 Emergency tire puncture repair kit . . . . . . .6-3 Emission control information label . . . . . . .9-11 Emission control system warranty . . . . . . .9-20 Engine Before starting the engine . . . . . . . . . .5-11 Break-in schedule . . . . . . . . . . . . . .5-42 Capacities and recommended fuel/ lubricants . . . . . . . . . . . . . . . . . . .9-2 Changing engine coolant . . . . . . . . . . .8-8 Changing engine oil and filter . . . . . . . .8-9 Checking engine coolant level . . . . . . . .8-7

Checking engine oil level. . . . . . . . . . .8-8 Coolant temperature gauge . . . . . . . . .2-6 Emergency engine shut off . . . . . . . . . .5-9 Engine block heater . . . . . . . . . . . . .5-55 Engine compartment check locations . . . .8-6 Engine cooling system . . . . . . . . . . . .8-7 Engine oil . . . . . . . . . . . . . . . . . . .8-8 Engine oil and oil filter recommendation . .9-5 Engine oil replacement indicator . . . . . .2-22 Engine oil viscosity . . . . . . . . . . . . . .9-5 Engine serial number . . . . . . . . . . . .9-10 Engine specifications . . . . . . . . . . . . .9-7 Engine start operation indicator (Automatic Transmission models) . . . . .2-18 Engine start operation indicator (Manual Transmission models) . . . . . . .2-19 If your vehicle overheats . . . . . . . . . .6-16 Starting the engine . . . . . . . . . . . . . .5-11 Event Data Recorders (EDR) . . . . . . . . . . .9-22 Exhaust gas (carbon monoxide) . . . . . . . . .5-2 F F.M.V.S.S./C.M.V.S.S. certification label . . . .9-11 Filter Air cleaner housing filter . . . . . . . . . .8-17 Changing engine oil and filter . . . . . . . .8-9 Flashers (See hazard warning flasher switch) . . . . . . . . . . . . . . . . . . . . . .2-36 Flat tire . . . . . . . . . . . . . . . . . . . . . . .6-2 Changing flat tire (with spare tire) . . . . .6-8 Repairing flat tire (with emergency tire puncture repair kit) . . . . . . . . . . . . . .6-3 Flat towing . . . . . . . . . . . . . . . . . . . .9-19 Floor mat cleaning. . . . . . . . . . . . . . . . .7-4

Fluid Automatic transmission fluid (ATF) . . . . .8-11 Brake and clutch fluid . . . . . . . . . . . .8-12 Brake fluid . . . . . . . . . . . . . . . . . .8-12 Capacities and recommended fuel/ lubricants . . . . . . . . . . . . . . . . . . .9-2 Engine coolant . . . . . . . . . . . . . . . . .8-7 Engine oil . . . . . . . . . . . . . . . . . . .8-8 Power steering fluid . . . . . . . . . . . . .8-11 Window washer fluid. . . . . . . . . . . . .8-13 FM-AM-SAT radio with Compact Disc (CD) player . . . . . . . . . . . . . . . . . . . . . . .4-53 Fog light switch . . . . . . . . . . . . . . . . .2-36 Front passenger air bag and status light . . .1-42 Front power seat adjustment . . . . . . . . . . .1-3 Front seat, Front seat adjustment . . . . . . . .1-3 Front-seat active head restraints . . . . . . . .1-10 Fuel Capacities and recommended fuel/ lubricants . . . . . . . . . . . . . . . . . . .9-2 Fuel economy. . . . . . . . . . . . . . . . .5-43 Fuel economy information (display) . . . . .4-9 Fuel octane rating . . . . . . . . . . . . . . .9-3 Fuel recommendation . . . . . . . . . . . . .9-3 Fuel-filler cap . . . . . . . . . . . . . . . . .3-30 Fuel-filler door . . . . . . . . . . . . . . . .3-30 Gauge. . . . . . . . . . . . . . . . . . . . . .2-7 LOOSE FUEL CAP warning . . . . . . . . . .3-32 Fuses . . . . . . . . . . . . . . . . . . . . . . .8-20 Fusible links . . . . . . . . . . . . . . . . . . .8-20 G Garage door opener, HomeLink姞 Universal Transceiver . . . . . . . . . . . . . . . . . . . .2-51

Gas cap . . . . . . . . . . . . . . . . . . . . . .3-30 Gauge. . . . . . . . . . . . . . . . . . . . . . . .2-4 Engine coolant temperature gauge . . . . .2-6 Fuel gauge . . . . . . . . . . . . . . . . . . .2-7 Odometer. . . . . . . . . . . . . . . . . . . .2-5 Speedometer . . . . . . . . . . . . . . . . . .2-5 Tachometer . . . . . . . . . . . . . . . . . .2-6 Trip computer . . . . . . . . . . . . . . . .2-23 General maintenance . . . . . . . . . . . . . . .8-2 Glove box . . . . . . . . . . . . . . . . . . . . .2-44 H Hands-free phone system, Bluetooth姞 (models with navigation system) . . . . . . . .4-85 Hands-free phone system, Bluetooth姞 (models without navigation system) . . . . . .4-96 Hard top If the top does not open or close . . . . .3-24 Indicators for retractable hard top (dot matrix). . . . . . . . . . . . . . .2-21, 3-22 Initializing. . . . . . . . . . . . . . . . . . .3-25 Operating using the Intelligent Key . . . .3-25 Retractable hard top operation . . . . . . .3-18 Hazard warning flasher switch . . . . . . . . .2-36 Head restraints. . . . . . . . . . . . . . . . . . .1-7 Headlights Bulb replacement . . . . . . . . . . . . . .8-25 Headlight switch . . . . . . . . . . . . . . .2-32 Xenon headlights. . . . . . . . . . . . . . .2-31 Heated seats . . . . . . . . . . . . . . . . . . .2-37 Heater Automatic climate control . . . . . . . . . .4-29 Engine block heater . . . . . . . . . . . . .5-55 HomeLink姞 Universal Transceiver . . . . . . . .2-51

Hood release . . . . . . . . . . . . . . . . . . .3-17 Horn . . . . . . . . . . . . . . . . . . . . . . . .2-37 I Ignition switch (Push-button). . . . . . . . . . . . . . . . . .5-7 Manual transmission models . . . . . . . .5-16 Immobilizer system . . . . . . . . . . . . . . .2-27 In-cabin microfilter. . . . . . . . . . . . . . . .4-36 Indicator Dot matrix display . . . . . . . . . . . . . .2-16 Lights . . . . . . . . . . . . . . . . . . . . .2-13 INFINITI Vehicle Immobilizer System . . . . . .2-27 INFINITI voice recognition system . . . . . . .4-109 INFO button . . . . . . . . . . . . . . . . . . . .4-8 Inside mirror . . . . . . . . . . . . . . . . . . .3-34 Inspection/maintenance (I/M) test . . . . . . .9-22 Instrument brightness control . . . . . . . . .2-35 Instrument panel . . . . . . . . . . . . . . . . .2-3 Intelligent cruise control (ICC) system . . . . .5-21 Preview function . . . . . . . . . . . . . . .5-42 Intelligent Cruise Control (ICC) system warning light . . . . . . . . . . . . . . . . . . .2-10 Intelligent Key . . . . . . . . . . . . . . . . . . .3-2 Intelligent Key battery discharge indicator . .2-19 Intelligent Key insertion indicator . . . . . . .2-18 Intelligent Key removal indicator . . . . . . . .2-18 Intelligent Key system . . . . . . . . . . . . . .3-6 Battery replacement . . . . . . . . . . . . .8-22 Key operating range . . . . . . . . . . . . .3-8 Key operation . . . . . . . . . . . . . . . . .3-9 Warning light . . . . . . . . . . . . . . . . .2-10 Warning signals. . . . . . . . . . . . . . . .3-11 Intelligent Key warning light . . . . . . . . . .2-10

10-3

Interior light control switch . . . . . . . . . . .2-50 Interior light replacement . . . . . . . . . . . .8-25 Interior lights. . . . . . . . . . . . . . . . . . .2-49 Interior trunk lid release . . . . . . . . . . . .3-30 iPod姞 player operation. . . . . . . . . . . . . .4-71 ISOFIX child restraint . . . . . . . . . . . . . . .1-21 J Jump starting . . . . . . . . . . . . . . . . . . .6-14 K Keyless entry (See remote keyless entry system) . . . . . . . . . . . . . . . . . . . . . .3-14 Keys. . . . . . . . . . . . . . . . . . . . . . . . .3-2 For Intelligent Key system . . . . . . . . . .3-6 L Labels Air bag warning labels. . . . . . . . . . . .1-48 Air conditioner specification label . . . . .9-12 Emission control information label . . . . .9-11 Engine serial number . . . . . . . . . . . .9-10 F.M.V.S.S./C.M.V.S.S. certification label . . . . . . . . . . . . . . . . . . . . . .9-11 Tire and Loading information label .8-28, 9-11 Vehicle identification number (VIN) . . . .9-10 LATCH Lower Anchors . . . . . . . . . . . . . .1-21 License plate, Installing front license plate . .9-12 Light Air bag warning light . . . . . . . . . . . .1-48 Bulb replacement . . . . . . . . . . . . . .8-24

10-4

Fog light switch . . . . . . . . . . . . . . .2-36 Headlight switch . . . . . . . . . . . . . . .2-32 Headlights bulb replacement . . . . . . . .8-25 Indicator lights . . . . . . . . . . . . . . . .2-13 Interior light control switch . . . . . . . . .2-50 Interior lights. . . . . . . . . . . . . . . . .2-49 Map lights . . . . . . . . . . . . . . . . . .2-49 Replacement . . . . . . . . . . . . . . . . .8-24 Trunk light. . . . . . . . . . . . . . . . . . .2-51 Vanity mirror lights. . . . . . . . . . . . . .2-51 Warning/indicator lights and audible reminders . . . . . . . . . . . . . . . . . . .2-9 Xenon headlights. . . . . . . . . . . . . . .2-31 Lights, Exterior and interior light replacement . . . . . . . . . . . . . . . . . . .8-25 Loading information (See vehicle loading information). . . . . . . . . . . . . . . . . . . .9-16 Lock Automatic door locks . . . . . . . . . . . . .3-5 Door locks . . . . . . . . . . . . . . . . . . .3-4 Power door lock . . . . . . . . . . . . . . . .3-4 Trunk lid . . . . . . . . . . . . . . . . . . .3-28 Locking with mechanical key. . . . . . . . . . .3-4 Low fuel warning . . . . . . . . . . . . . . . . .2-19 Low tire pressure warning light. . . . . . . . .2-10 Low tire pressure warning system (See tire pressure monitoring system (TPMS)) . . . . . .5-3 Low washer fluid warning . . . . . . . . . . . .2-19 M Maintenance Battery. . . . . . . . . . . . . . . . . . . . .8-13 General maintenance . . . . . . . . . . . . .8-2 Indicators for maintenance . . . . . . . . .2-22

Inside the vehicle . . . . . . . . . . . . . . .8-3 Maintenance precautions . . . . . . . . . . .8-5 Maintenance requirements . . . . . . . . . .8-2 Outside the vehicle . . . . . . . . . . . . . .8-2 Seat belt maintenance . . . . . . . . . . . .1-18 Malfunction indicator light (MIL) . . . . . . . .2-14 Map lights . . . . . . . . . . . . . . . . . . . .2-49 Master warning light . . . . . . . . . . . . . . .2-12 Mechanical key (Intelligent Key system) . . . .3-3 Memory storage, Automatic drive positioner . . . . . . . . . . . . . . . . . . . . .3-38 Meter Trip computer . . . . . . . . . . . . . . . .2-23 Meters and gauges . . . . . . . . . . . . . . . .2-4 Instrument brightness control . . . . . . .2-35 Mirror Inside mirror . . . . . . . . . . . . . . . . .3-34 Outside mirrors. . . . . . . . . . . . . . . .3-35 Vanity mirror . . . . . . . . . . . . . . . . .3-36 Monitor, Rearview monitor . . . . . . . . . . .4-22 N New vehicle break-in . . . . . . . . . . . . . .5-42 No key warning. . . . . . . . . . . . . . . . . .2-18 O Odometer. . . . . . . . . . . . . . . . . . Off-road recovery . . . . . . . . . . . . . Oil Capacities and recommended fuel/ lubricants . . . . . . . . . . . . . . . Changing engine oil and filter . . . . Checking engine oil level. . . . . . .

. . . .2-5 . . . .5-6 . . . .9-2 . . . .8-9 . . . .8-8

Engine oil . . . . . . . . . . . . . . . . . . .8-8 Engine oil viscosity . . . . . . . . . . . . . .9-5 Oil filter replacement indicator . . . . . . .2-22 Opening the retractable hard top . . . .3-23, 3-25 Operating the retractable hard top . . . . . . .3-18 Operation, Indicators for operation. . . . . . .2-18 Outside air temperature . . . . . . . . . . . . .2-24 Outside mirrors. . . . . . . . . . . . . . . . . .3-35 Overheat, If your vehicle overheats . . . . . .6-16 Owner’s Manual/Service Manual order information . . . . . . . . . . . . . . . . . . . .9-23 P Panic alarm . . . . . . . . . . . . . . . . . . . .3-15 Parking Brake break-in . . . . . . . . . . . . . . . .5-48 Parking brake operation . . . . . . . . . . .5-18 Parking brake release warning . . . . . . .2-19 Parking on hills . . . . . . . . . . . . . . .5-44 Phone Bluetooth姞 hands-free phone system (models with navigation system) . . . . . .4-85 Bluetooth姞 hands-free phone system (models without navigation system) . . . .4-96 Car phone or CB radio. . . . . . . . . . . .4-85 Pop-up roll bar system . . . . . . . . . . . . .1-49 Power Front seat adjustment . . . . . . . . . . . . .1-3 Power door lock . . . . . . . . . . . . . . . .3-4 Power outlet . . . . . . . . . . . . . . . . .2-41 Power steering fluid . . . . . . . . . . . . .8-11 Power steering system . . . . . . . . . . .5-47 Power windows . . . . . . . . . . . . . . .2-46 Pre-crash seat belts . . . . . . . . . . . . . . .1-15

Precautions Audio operation . . . . . . . . . . . . . . .4-37 Braking precautions . . . . . . . . . . . . .5-48 Child restraints . . . . . . . . . . . . . . . .1-19 Cruise control . . . . . . . . . . . . . . . . .5-19 Maintenance . . . . . . . . . . . . . . . . . .8-5 Seat belt usage . . . . . . . . . . . . . . . .1-11 Supplemental restraint system . . . . . . .1-35 When starting and driving . . . . . . . . . .5-2 Preview function . . . . . . . . . . . . . . . . .5-49 Preview function (for Intelligent cruise control system) . . . . . . . . . . . . . . . . . .5-42 Preview Function warning light . . . . . . . . .2-12 Push starting . . . . . . . . . . . . . . . . . . .6-16 Push warning (Automatic Transmission models) . . . . . . . . . . . . . . . . . . . . . .2-19 Push-button ignition switch . . . . . . . . .5-7, 5-8 R Radio . . . . . . . . . . . . . . . . . . . . . . .4-37 Car phone or CB radio. . . . . . . . . . . .4-85 FM-AM-SAT radio with Compact Disc (CD) player . . . . . . . . . . . . . . . . . . . . .4-53 Rain-sensing auto wiper system . . . . . . . .2-30 Rapid air pressure loss . . . . . . . . . . . . . .5-6 Readiness for inspection/maintenance (I/M) test . . . . . . . . . . . . . . . . . . . . . . . .9-22 Rear window and outside mirror defroster switch . . . . . . . . . . . . . . . . . . . . . . .2-31 Rearview monitor . . . . . . . . . . . . . . . .4-22 Recorders, Event data . . . . . . . . . . . . . .9-22 Registering your vehicle in another country . .9-9 Remote keyless entry system . . . . . . . . . .3-14

Repairing flat tire (with emergency tire puncture repair kit) . . . . . . . . . . . . . . . .6-3 Reporting safety defects. . . . . . . . . . . . .9-21 Retractable hard top . . . . . . . . . . . . . . .3-18 Roadside assistance program . . . . . . . . . .6-2 Rollover . . . . . . . . . . . . . . . . . . . . . . .5-5 Roof, Retractable hard top . . . . . . . . . . .3-18 S Safety, Child seat belts . . . . . . . . . . . . .1-13 Satellite radio operation . . . . . . . . . . . .4-54 Seat adjustment Front power seat adjustment . . . . . . . . .1-3 Front seats . . . . . . . . . . . . . . . . . . .1-3 Seat belt(s) Child safety . . . . . . . . . . . . . . . . . .1-13 Infants . . . . . . . . . . . . . . . . . . . . .1-14 Injured persons . . . . . . . . . . . . . . . .1-14 Larger children . . . . . . . . . . . . . . . .1-14 Pre-crash seat belts . . . . . . . . . . . . .1-15 Precautions on seat belt usage . . . . . . .1-11 Pregnant women . . . . . . . . . . . . . . .1-14 Seat belt cleaning . . . . . . . . . . . . . . .7-5 Seat belt extenders. . . . . . . . . . . . . .1-18 Seat belt guide . . . . . . . . . . . . . . . .1-17 Seat belt maintenance . . . . . . . . . . . .1-18 Seat belt warning light . . . . . . . . . . .2-12 Seat belts . . . . . . . . . . . . . . . . . . .1-11 Seat belts with pretensioners . . . . . . . .1-47 Small children. . . . . . . . . . . . . . . . .1-14 Three-point type. . . . . . . . . . . . . . . .1-15 Seat synchronization function . . . . . . . . .3-37 Seat(s) Climate controlled seats . . . . . . . . . .2-38

10-5

Driver-side memory . . . . . . . . . . . . .3-36 Heated seats . . . . . . . . . . . . . . . . .2-37 Seats . . . . . . . . . . . . . . . . . . . . . .1-2 Security system, Vehicle security system . . .2-26 Security system (INFINITI Vehicle Immobilizer System), Engine start . . . . . . .2-27 Selector lever Shift lock release. . . . . . . . . . . . . . .5-16 Separator, Retractable hard top . . . . . . . .3-20 Servicing climate control . . . . . . . . . . . .4-36 SETTING button . . . . . . . . . . . . . . . . . .4-12 Shift “P” warning (Automatic Transmission models) . . . . . . . . . . . . . . . . . . . . . .2-18 Shift lock release, Transmission . . . . . . . .5-16 Shifting Automatic transmission . . . . . . . . . . .5-12 Manual transmission. . . . . . . . . . . . .5-16 Sliding front passenger’s seat . . . . . . . . . .1-5 Sonar system . . . . . . . . . . . . . . . . . . .5-45 Sonar system off switch. . . . . . . . . . . . .5-47 Spare tire . . . . . . . . . . . . . . . . . . . . .9-8 Spark plugs . . . . . . . . . . . . . . . . . . . .8-16 Speedometer . . . . . . . . . . . . . . . . . . . .2-5 Starting Before starting the engine . . . . . . . . . .5-11 Jump starting . . . . . . . . . . . . . . . . .6-14 Precautions when starting and driving . . .5-2 Push starting . . . . . . . . . . . . . . . . .6-16 Starting the engine . . . . . . . . . . . . . .5-11 STATUS button. . . . . . . . . . . . . . . . . . .4-7 Status light, Front passenger air bag . . . . .1-42 Steering Power steering fluid . . . . . . . . . . . . .8-11 Power steering system . . . . . . . . . . .5-47 Steering lock . . . . . . . . . . . . . . . . . .5-9 Steering lock release malfunction

10-6

indicator. . . . . . . . . . . . . . . . . . . .2-18 Steering-wheel-mounted controls for audio . . . . . . . . . . . . . . . . . . . . .4-82 Tilt/telescopic steering . . . . . . . . . . .3-33 Storage . . . . . . . . . . . . . . . . . . . . . .2-43 Storage box . . . . . . . . . . . . . . . . . . .2-46 Sun visors . . . . . . . . . . . . . . . . . . . .3-34 Supplemental air bag warning labels . . . . .1-48 Supplemental air bag warning light . . .1-48, 2-12 Supplemental restraint system . . . . . . . . .1-35 Precautions on supplemental restraint system . . . . . . . . . . . . . . . . . . . . .1-35 Switch Autolight switch . . . . . . . . . . . . . . .2-32 Fog light switch . . . . . . . . . . . . . . .2-36 Hazard warning flasher switch . . . . . . .2-36 Headlight switch . . . . . . . . . . . . . . .2-32 Ignition switch . . . . . . . . . . . . . . . .5-12 Ignition switch manual transmission models. . . . . . . . . . . . . . . . . . . . .5-16 Power door lock switch . . . . . . . . . . . .3-5 Rear window and outside mirror defroster switch . . . . . . . . . . . . . . . . . . . . .2-31 Retractable hard top switch . . . . .3-23, 3-25 Turn signal switch . . . . . . . . . . . . . .2-35 Vehicle dynamic control (VDC) off switch .2-39 T Tachometer . . . . . . . . . . . . . . . . . . . .2-6 Temperature gauge, Engine coolant temperature gauge . . . . . . . . . . . . . . . .2-6 Theft (INFINITI Vehicle Immobilizer System), Engine start. . . . . . . . . . . . . . . . . . . .2-27 Thigh extension . . . . . . . . . . . . . . . . . .1-5

Three-way catalyst. . . . . . . . . . . . . . . . .5-2 Tilt/telescopic steering . . . . . . . . . . . . .3-33 Tire Pressure, Low tire pressure warning light . . . . . . . . . . . . . . . . . . . . . .2-10 Sealant . . . . . . . . . . . . . . . . . . . . .6-3 Tire replacement indicator . . . . . . . . .2-22 Tires Emergency tire puncture repair kit . . . . .6-3 Flat tire . . . . . . . . . . . . . . . . . . . . .6-2 Low tire pressure warning system . . . . . .5-3 Spare tire . . . . . . . . . . . . . . . . . . .8-35 Tire and Loading information label .8-28, 9-11 Tire chains . . . . . . . . . . . . . . . . . .8-32 Tire dressing . . . . . . . . . . . . . . . . . .7-3 Tire pressure . . . . . . . . . . . . . . . . .8-27 Tire pressure monitoring system (TPMS). . . . . . . . . . . . . . . . . . .5-3, 6-2 Tire rotation . . . . . . . . . . . . . . . . .8-33 Types of tires. . . . . . . . . . . . . . . . .8-32 Uniform tire quality grading. . . . . . . . .9-19 Wheel/tire size . . . . . . . . . . . . . . . .9-8 Wheels and tires . . . . . . . . . . . . . . .8-27 Top, Retractable hard top . . . . . . . . . . . .3-18 Touch screen system . . . . . . . . . . . . . . .4-4 Towing Flat towing . . . . . . . . . . . . . . . . . .9-19 Tow truck towing . . . . . . . . . . . . . . .6-17 Towing a trailer. . . . . . . . . . . . . . . .9-19 TPMS, Tire pressure monitoring system. . . . .5-3 TPMS, Tire pressure warning system . . . . . .6-2 Trailer towing . . . . . . . . . . . . . . . . . . .9-19 Transceiver, HomeLink姞 Universal Transceiver . . . . . . . . . . . . . . . . . . . .2-51 Transmission Automatic transmission fluid (ATF) . . . . .8-11

Driving with automatic transmission . . . .5-12 Driving with manual transmission . . . . .5-16 Transmission selector lever lock release. .5-16 Transmitter (See remote keyless entry system) . . . . . . . . . . . . . . . . . . . . . .3-14 Traveling or registering your vehicle in another country . . . . . . . . . . . . . . . . . .9-9 Trip computer . . . . . . . . . . . . . . . . . .2-23 Trip odometer . . . . . . . . . . . . . . . . . .2-24 Trunk Interior trunk lid release . . . . . . . . . .3-30 Light . . . . . . . . . . . . . . . . . . . . . .2-51 Trunk lid . . . . . . . . . . . . . . . . . . .3-28 Trunk lid release switch. . . . . . . . . . .3-28 Trunk open request switch . . . . . . . . .3-28 Trunk release power cancel switch. . . . .3-29 Turn signal switch . . . . . . . . . . . . . . . .2-35 U Underbody cleaning . . . . . . . . . . . . . . . .7-3 Uniform tire quality grading. . . . . . . . . . .9-19 USB memory operation . . . . . . . . . . . . .4-62 V Vanity mirror . . . . . . . . . . . . . . . . . . .3-36 Vanity mirror lights. . . . . . . . . . . . . . . .2-51 Variable voltage control system . . . . . . . .8-15 Vehicle Dimensions . . . . . . . . . . . . . . . . . .9-9 Identification number (VIN) . . . . . . . . .9-10 Loading information . . . . . . . . . . . . .9-16 Recovery (freeing a stuck vehicle) . . . . .6-19 Security system . . . . . . . . . . . . . . .2-26

Vehicle dynamic control (VDC) off switch .2-39 Vehicle dynamic control (VDC) system . . .5-52 Vehicle dynamic control (VDC) warning light . . . . . . . . . . . . . . . . . . . . . .2-13 Vehicle information and settings (display) .4-7 Ventilators . . . . . . . . . . . . . . . . . . . .4-28 Voice command (Bluetooth姞 Hands-Free Phone System) . . . . . . . . . . . . . . . . .4-101 Voice command (INFINITI voice recognition system) . . . . . . . . . . . . . . . . . .4-115, 4-125 Voice recognition system . . . . . . . . . . .4-109 Voice recognition, Alternate command mode . . . . . . . . . . . . . . . . . . . . . . .4-122 Voice recognition, Standard mode . . . . . .4-109 W Walk-in mechanism . . . . . . . . . . . . . . . .1-6 Warning Dot matrix display . . . . . . . . . . . . . .2-16 Hazard warning flasher switch . . . . . . .2-36 Lights . . . . . . . . . . . . . . . . . . . . . .2-9 Tire pressure monitoring system (TPMS). . . . . . . . . . . . . . . . . . .5-3, 6-2 Warning/indicator lights and audible reminders . . . . . . . . . . . . . . . . . . .2-8 Warning labels, Air bag warning labels . . . .1-48 Warning light Air bag warning light . . . . . . . . .1-48, 2-12 Anti-lock braking system (ABS) warning light. . . . . . . . . . . . . . . . . . . . . . .2-9 Brake warning light . . . . . . . . . . . . . .2-9 Intelligent Key warning light . . . . . . . .2-10 Low tire pressure warning light. . . . . . .2-10 Seat belt warning light . . . . . . . . . . .2-12

Warranty, Emission control system warranty . . . . . . . . . . . . . . . . . . . . .9-20 Washer switch, Windshield wiper and washer switch . . . . . . . . . . . . . . . . . .2-28 Washing . . . . . . . . . . . . . . . . . . . . . .7-2 Waxing . . . . . . . . . . . . . . . . . . . . . . .7-2 Wheel/tire size . . . . . . . . . . . . . . . . . .9-8 Wheels and tires . . . . . . . . . . . . . . . . .8-27 Cleaning aluminum alloy wheels. . . . . . .7-3 Window washer fluid. . . . . . . . . . . . . . .8-13 Window(s) Automatic adjusting function . . . . . . . .2-48 Cleaning . . . . . . . . . . . . . . . . . . . .7-3 Power windows . . . . . . . . . . . . . . .2-46 Windshield wiper and washer switch . . . . .2-28 Wiper Rain-sensing auto wiper system . . . . . .2-30 Windshield wiper and washer switch . . .2-28 Wiper blades . . . . . . . . . . . . . . . . .8-18 X Xenon headlights. . . . . . . . . . . . . . . . .2-31

10-7

GAS STATION INFORMATION FUEL RECOMMENDATION: VQ37VHR engine Use unleaded premium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research octane number 96). If premium gasoline is not available, unleaded regular gasoline with an octane rating of 87 AKI number (Research octane number 91) may be temporarily used, but only under the following precautions: ● Have the fuel tank filled only partially with unleaded regular gasoline, and fill up with unleaded premium gasoline as soon as possible.

● Under no circumstances should a leaded gasoline be used, since this will damage the three way catalyst. ● Do not use E-85 fuel in your vehicle. Your vehicle is not designed to run on E-85 fuel. Using E-85 fuel can damage the fuel system components and is not covered by the INFINITI vehicle limited warranty. For additional information, see “CAPACITIES AND RECOMMENDED FUEL/LUBRICANTS” in the “9. Technical and consumer information” section.

ENGINE OIL RECOMMENDATION:

● Avoid full throttle driving and abrupt acceleration.

● Engine oil with API Certification Mark

However, for maximum vehicle performance, the use of unleaded premium gasoline is recommended.

See “CAPACITIES AND RECOMMENDED FUEL/LUBRICANTS” in the “9. Technical and consumer information” section for engine oil and oil filter recommendation.

CAUTION ● Using a fuel other than that specified could adversely affect the emission control systems, and may also affect warranty coverage.

● Viscosity SAE 5W-30

COLD TIRE PRESSURES: The label is typically located on the driver side center pillar or on the driver’s door. For additional information, see “WHEELS AND TIRES” in the “8. Maintenance and do-it-yourself” section.

NEW VEHICLE BREAK-IN PROCEDURES RECOMMENDATION: During the first 1,200 miles (2,000 km) of vehicle use, follow the recommendations outlined in the “BREAK-IN SCHEDULE” in the “5. Starting and driving” section of this Owner’s Manual. Follow these recommendations for the future reliability and economy of your new vehicle.

Printing: October 2010 (12) / OM1E GV36U0 / Printed in U.S.A.

2011 Infiniti G37 COUPE

For your safety, read carefully and keep in this vehicle.

2011 Infiniti G37 COUPE

Owner’s Manual